Branch 'f12-tx' - po/pl.po

Wed Nov 25 23:02:19 UTC 2009

po/pl.po | 7879 ++++++++++++++++++++++++++++++++++-----------------------------
 1 file changed, 4352 insertions(+), 3527 deletions(-)

New commits:
commit c1cf350f65ec262ab38348c69804ab6762206a64
Author: raven <raven at fedoraproject.org>
Date:   Wed Nov 25 23:02:12 2009 +0000

    Sending translation for Polish

diff --git a/po/pl.po b/po/pl.po
index 93710ff..97da6ea 100644
--- a/po/pl.po
+++ b/po/pl.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Installation_Guide VERSION\n"
 "Report-Msgid-Bugs-To: http://bugs.kde.org\n"
-"POT-Creation-Date: 2009-04-15 01:05+0000\n"
+"POT-Creation-Date: 2009-09-30 11:04+0000\n"
 "PO-Revision-Date: 2009-04-01 19:05+0000\n"
 "Last-Translator: Piotr DrÄ…g <piotrdrag at gmail.com>\n"
 "Language-Team: Polish <pl at li.org>\n"
@@ -173,6 +173,46 @@ msgid "file system types"
 msgstr ""
 
 #. Tag: para
+#: Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml:6
+#, no-c-format
+msgid ""
+"<guilabel>Btrfs</guilabel> — Btrfs is under development as a file "
+"system capable of addressing and managing more files, larger files, and "
+"larger volumes than the ext2, ext3, and ext4 file systems. Btrfs is designed "
+"to make the file system tolerant of errors, and to facilitate the detection "
+"and repair of errors when they occur. It uses checksums to ensure the "
+"validity of data and metadata, and maintains snapshots of the file system "
+"that can be used for backup or repair."
+msgstr ""
+
+#. Tag: para
+#: Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml:9
+#, no-c-format
+msgid ""
+"Because Btrfs is still experimental and under development, the installation "
+"program does not offer it by default. If you want to create a Btrfs "
+"partition on a drive, you must commence the installation process with the "
+"boot option <command> icantbelieveitsnotbtr</command>. Refer to <xref "
+"linkend=\"ap-admin-options\"/> for instructions."
+msgstr ""
+
+#. Tag: title
+#: Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml:13
+#, no-c-format
+msgid "Btrfs is still experimental"
+msgstr ""
+
+#. Tag: para
+#: Adding_Partitions-section-2-itemizedlist-1-listitem-0.xml:14
+#, no-c-format
+msgid ""
+"Fedora &PRODVER; includes Btrfs as a technology preview to allow you to "
+"experiment with this file system. You should not choose Btrfs for partitions "
+"that will contain valuable data or that are essential for the operation of "
+"important systems."
+msgstr ""
+
+#. Tag: para
 #: Adding_Partitions-section-2-itemizedlist-1-listitem-1.xml:8
 #, no-c-format
 msgid ""
@@ -189,7 +229,7 @@ msgid ""
 "file system and features a number of improvements. These include support for "
 "larger file systems and larger files, faster and more efficient allocation "
 "of disk space, no limit on the number of subdirectories within a directory, "
-"faster file system checking, and more robust journalling. The ext3 file "
+"faster file system checking, and more robust journalling. The ext4 file "
 "system is selected by default and is highly recommended."
 msgstr ""
 
@@ -333,7 +373,7 @@ msgstr ""
 #, no-c-format
 msgid ""
 "<guilabel>Size (MB)</guilabel>: Enter the size (in megabytes) of the "
-"partition. Note, this field starts with 100 MB; unless changed, only a 100 "
+"partition. Note, this field starts with 200 MB; unless changed, only a 200 "
 "MB partition will be created."
 msgstr ""
 
@@ -692,10 +732,10 @@ msgstr ""
 
 #. Tag: para
 #: adminoptions.xml:176
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
 "To specify the installation method from the <prompt>boot:</prompt> prompt, "
-"use the <option>method</option> option. Refer to <xref linkend=\"tb-"
+"use the <option>repo</option> option. Refer to <xref linkend=\"tb-"
 "installmethods\"/> for the supported installation methods."
 msgstr ""
 "Aby okreÅ›liÄ‡ metodÄ™ instalacji ze znakiem zachÄ™ty <prompt>boot:</prompt>, "
@@ -715,31 +755,32 @@ msgid "<entry>Installation method</entry>"
 msgstr "metoda instalacji"
 
 #. Tag: entry
-#: adminoptions.xml:190 adminoptions.xml:578 adminoptions.xml:706
+#: adminoptions.xml:190 adminoptions.xml:581
 #, fuzzy, no-c-format
 msgid "Option format"
 msgstr "Format opcji"
 
 #. Tag: entry
-#: adminoptions.xml:195 adminoptions.xml:583
+#: adminoptions.xml:195 adminoptions.xml:586
 #, no-c-format
 msgid "CD or DVD drive"
 msgstr "NapÄ™d CD lub DVD"
 
 #. Tag: option
 #: adminoptions.xml:196
-#, no-c-format
-msgid "method=<replaceable>cdrom</replaceable>"
-msgstr ""
+#, fuzzy, no-c-format
+msgid "repo=cdrom:<replaceable>device</replaceable>"
+msgstr "cdrom:/folder/ks.cfg"
 
 #. Tag: option
 #: adminoptions.xml:200
-#, no-c-format
-msgid "method=<replaceable>hd://device/</replaceable>"
-msgstr ""
+#, fuzzy, no-c-format
+msgid ""
+"repo=hd:<replaceable>device</replaceable>/<replaceable>path</replaceable>"
+msgstr "hd:/urzÄ…dzenie/folder/ks.cfg"
 
 #. Tag: entry
-#: adminoptions.xml:203 adminoptions.xml:595 adminoptions.xml:715
+#: adminoptions.xml:203 adminoptions.xml:598
 #, no-c-format
 msgid "HTTP Server"
 msgstr "Serwer HTTP"
@@ -747,23 +788,28 @@ msgstr "Serwer HTTP"
 #. Tag: option
 #: adminoptions.xml:204
 #, fuzzy, no-c-format
-msgid "method=<replaceable>http://server.mydomain.com/directory/</replaceable>"
-msgstr "http://serwer.mojadomena.pl/folder/"
+msgid ""
+"repo=http://<replaceable>host</replaceable>/<replaceable>path</replaceable>"
+msgstr ""
+"http://serwerlustrzany.przykÅ‚ad.pl/pub/fedora/linux/releases/10/Fedora/"
+"<placeholder-1/>/os"
 
 #. Tag: entry
-#: adminoptions.xml:207 adminoptions.xml:599 adminoptions.xml:719
+#: adminoptions.xml:207 adminoptions.xml:602
 #, no-c-format
 msgid "FTP Server"
 msgstr "Serwer FTP"
 
 #. Tag: option
 #: adminoptions.xml:208
-#, fuzzy, no-c-format
-msgid "method=<replaceable>ftp://server.mydomain.com/directory/</replaceable>"
-msgstr "ftp://serwer.mojadomena.pl/folder/"
+#, no-c-format
+msgid ""
+"repo=ftp://<replaceable>username</replaceable>:<replaceable>password</"
+"replaceable>@<replaceable>host</replaceable>/<replaceable>path</replaceable>"
+msgstr ""
 
 #. Tag: entry
-#: adminoptions.xml:211 adminoptions.xml:603 adminoptions.xml:723
+#: adminoptions.xml:211 adminoptions.xml:606
 #, no-c-format
 msgid "NFS Server"
 msgstr "Serwer NFS"
@@ -771,17 +817,34 @@ msgstr "Serwer NFS"
 #. Tag: option
 #: adminoptions.xml:212
 #, fuzzy, no-c-format
-msgid "method=<replaceable>nfs:server.mydomain.com:/directory/</replaceable>"
+msgid ""
+"repo=nfs:<replaceable>server</replaceable>:/<replaceable>path</replaceable>"
 msgstr "nfs:serwer.mojadomena.pl:/folder/"
 
+#. Tag: entry
+#: adminoptions.xml:215
+#, no-c-format
+msgid "ISO images on an NFS Server"
+msgstr ""
+
+#. Tag: option
+#: adminoptions.xml:216
+#, fuzzy, no-c-format
+msgid ""
+"repo=nfsiso:<replaceable>server</replaceable>:/<replaceable>path</"
+"replaceable>"
+msgstr ""
+"fedora/linux/releases/10/Fedora/<placeholder-1/>/iso/F-10-<placeholder-2/>-"
+"DVD.iso"
+
 #. Tag: title
-#: adminoptions.xml:219
+#: adminoptions.xml:223
 #, no-c-format
 msgid "Manually Configuring the Network Settings"
 msgstr "RÄ™czne konfigurowanie ustawieÅ„ sieciowych"
 
 #. Tag: para
-#: adminoptions.xml:220
+#: adminoptions.xml:224
 #, no-c-format
 msgid ""
 "By default, the installation system uses DHCP to automatically obtain the "
@@ -806,7 +869,7 @@ msgstr ""
 "guilabel> siÄ™ nie pojawi."
 
 #. Tag: para
-#: adminoptions.xml:236
+#: adminoptions.xml:240
 #, no-c-format
 msgid ""
 "This example configures the network settings for an installation system that "
@@ -818,7 +881,7 @@ msgstr ""
 "systemitem>:"
 
 #. Tag: screen
-#: adminoptions.xml:241
+#: adminoptions.xml:245
 #, no-c-format
 msgid ""
 "<userinput>linux ip=<replaceable>192.168.1.10</replaceable> "
@@ -828,13 +891,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:243
+#: adminoptions.xml:247
 #, no-c-format
 msgid "Configuring the Installed System"
 msgstr "Konfigurowanie zainstalowanego systemu"
 
 #. Tag: para
-#: adminoptions.xml:245
+#: adminoptions.xml:249
 #, fuzzy, no-c-format
 msgid ""
 "Use the Network Configuration screen to specify the network settings for the "
@@ -847,13 +910,13 @@ msgstr ""
 "zainstalowanego systemu, zobacz <xref linkend=\"ch-networkconfig\"/>."
 
 #. Tag: title
-#: adminoptions.xml:255
+#: adminoptions.xml:259
 #, no-c-format
 msgid "Enabling Remote Access to the Installation System"
 msgstr "WÅ‚Ä…czanie zdalnego dostÄ™pu do systemu instalacyjnego"
 
 #. Tag: para
-#: adminoptions.xml:257
+#: adminoptions.xml:261
 #, fuzzy, no-c-format
 msgid ""
 "You may access either graphical or text interfaces for the installation "
@@ -875,30 +938,30 @@ msgstr ""
 "Microsoft Windows i Mac OS, tak samo jak dla systemÃ³w opartych na Uniksie."
 
 #. Tag: title
-#: adminoptions.xml:270
+#: adminoptions.xml:274
 #, no-c-format
 msgid "Installing a VNC Client on Fedora"
 msgstr "Instalowanie klienta VNC na Fedorze"
 
 #. Tag: primary
-#: adminoptions.xml:273 adminoptions.xml:296
+#: adminoptions.xml:277 adminoptions.xml:299
 #, no-c-format
 msgid "VNC (Virtual Network Computing)"
 msgstr ""
 
 #. Tag: secondary
-#: adminoptions.xml:274
+#: adminoptions.xml:278
 #, fuzzy, no-c-format
 msgid "installing client"
 msgstr "metoda instalacji"
 
 #. Tag: para
-#: adminoptions.xml:275
+#: adminoptions.xml:279
 #, fuzzy, no-c-format
 msgid ""
-"Fedora includes <application>vncviewer</application>, the client provided by "
-"the developers of VNC. To obtain <application>vncviewer</application>, "
-"install the <filename>vnc</filename> package."
+"Fedora includes the VNC client <application>vncviewer</application>. To "
+"obtain <application>vncviewer</application>, install the <package>tigervnc</"
+"package> package."
 msgstr ""
 "<indexterm><primary>VNC (Wirtualny komputer sieciowy)</"
 "primary><secondary>instalowanie klienta</secondary></indexterm> Fedora "
@@ -907,7 +970,7 @@ msgstr ""
 "zainstaluj pakiet <filename>vnc</filename>."
 
 #. Tag: para
-#: adminoptions.xml:282
+#: adminoptions.xml:285
 #, no-c-format
 msgid ""
 "The installation system supports two methods of establishing a VNC "
@@ -924,19 +987,19 @@ msgstr ""
 "uruchomionym w <firstterm>trybie nasÅ‚uchiwania</firstterm>."
 
 #. Tag: title
-#: adminoptions.xml:292
+#: adminoptions.xml:295
 #, no-c-format
 msgid "Enabling Remote Access with VNC"
 msgstr "WÅ‚Ä…czanie zdalnego dostÄ™pu za pomocÄ… VNC"
 
 #. Tag: secondary
-#: adminoptions.xml:297
+#: adminoptions.xml:300
 #, no-c-format
 msgid "enabling"
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:298
+#: adminoptions.xml:301
 #, fuzzy, no-c-format
 msgid ""
 "To enable remote graphical access to the installation system, enter two "
@@ -947,7 +1010,7 @@ msgstr ""
 "zdalny dostÄ™p do systemu instalacyjnego, podaj dwie opcje po znaku zachÄ™ty:"
 
 #. Tag: screen
-#: adminoptions.xml:302
+#: adminoptions.xml:305
 #, no-c-format
 msgid ""
 "<userinput>linux vnc vncpassword=<replaceable>qwerty</replaceable></"
@@ -955,7 +1018,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:303
+#: adminoptions.xml:306
 #, no-c-format
 msgid ""
 "The <option>vnc</option> option enables the VNC service. The "
@@ -967,19 +1030,19 @@ msgstr ""
 "hasÅ‚o <userinput>qwerty</userinput>."
 
 #. Tag: title
-#: adminoptions.xml:311
+#: adminoptions.xml:314
 #, no-c-format
 msgid "VNC Passwords"
 msgstr "HasÅ‚a VNC"
 
 #. Tag: para
-#: adminoptions.xml:313
+#: adminoptions.xml:316
 #, no-c-format
 msgid "The VNC password must be at least six characters long."
 msgstr "HasÅ‚o VNC musi mieÄ‡ co najmniej szeÅ›Ä‡ znakÃ³w."
 
 #. Tag: para
-#: adminoptions.xml:318
+#: adminoptions.xml:321
 #, no-c-format
 msgid ""
 "Specify the language, keyboard layout and network settings for the "
@@ -993,7 +1056,7 @@ msgstr ""
 "wÅ‚aÅ›ciwe ustawienia poÅ‚Ä…czenia dla klienta VNC:"
 
 #. Tag: screen
-#: adminoptions.xml:325
+#: adminoptions.xml:328
 #, no-c-format
 msgid ""
 "Starting VNC...\n"
@@ -1004,7 +1067,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:326
+#: adminoptions.xml:329
 #, fuzzy, no-c-format
 msgid ""
 "You may then login to the installation system with a VNC client. To run the "
@@ -1026,13 +1089,13 @@ msgstr ""
 "<userinput>komputer.mojadomena.pl:1</userinput>."
 
 #. Tag: title
-#: adminoptions.xml:341
+#: adminoptions.xml:344
 #, no-c-format
 msgid "Connecting the Installation System to a VNC Listener"
 msgstr "ÅÄ…czenie systemu instalacyjnego z nasÅ‚uchujÄ…cym VNC."
 
 #. Tag: para
-#: adminoptions.xml:343
+#: adminoptions.xml:346
 #, fuzzy, no-c-format
 msgid ""
 "To have the installation system automatically connect to a VNC client, first "
@@ -1050,19 +1113,19 @@ msgstr ""
 "oknie terminala podaj polecenie:"
 
 #. Tag: screen
-#: adminoptions.xml:355
+#: adminoptions.xml:358
 #, no-c-format
 msgid "<userinput>vncviewer -listen</userinput>"
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:357 adminoptions.xml:501
+#: adminoptions.xml:360 adminoptions.xml:504
 #, no-c-format
 msgid "Firewall Reconfiguration Required"
 msgstr "Wymagane jest ponowne skonfigurowanie zapory sieciowej"
 
 #. Tag: para
-#: adminoptions.xml:359
+#: adminoptions.xml:362
 #, fuzzy, no-c-format
 msgid ""
 "By default, <application>vncviewer</application> uses TCP port 5500 when in "
@@ -1082,7 +1145,7 @@ msgstr ""
 "<userinput>tcp</userinput> jako <guilabel>ProtokÃ³Å‚</guilabel>."
 
 #. Tag: para
-#: adminoptions.xml:374
+#: adminoptions.xml:377
 #, no-c-format
 msgid ""
 "Once the listening client is active, start the installation system and set "
@@ -1100,7 +1163,7 @@ msgstr ""
 "systemu."
 
 #. Tag: para
-#: adminoptions.xml:386
+#: adminoptions.xml:389
 #, no-c-format
 msgid ""
 "For example, to connect to a VNC client on the system <systemitem class="
@@ -1112,7 +1175,7 @@ msgstr ""
 "znaku zachÄ™ty <prompt>boot:</prompt>:"
 
 #. Tag: screen
-#: adminoptions.xml:394
+#: adminoptions.xml:397
 #, no-c-format
 msgid ""
 "<userinput>linux vnc vncpassword=<replaceable>qwerty</replaceable> "
@@ -1120,13 +1183,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:398
+#: adminoptions.xml:401
 #, no-c-format
 msgid "Enabling Remote Access with Telnet"
 msgstr "WÅ‚Ä…czanie zdalnego dostÄ™pu za pomocÄ… Telnetu"
 
 #. Tag: para
-#: adminoptions.xml:400
+#: adminoptions.xml:403
 #, fuzzy, no-c-format
 msgid ""
 "To enable remote access to a text mode installation, use the <indexterm> "
@@ -1138,13 +1201,13 @@ msgstr ""
 "znaku zachÄ™ty <prompt>boot:</prompt>:"
 
 #. Tag: screen
-#: adminoptions.xml:410
+#: adminoptions.xml:413
 #, no-c-format
 msgid "<userinput>linux text telnet</userinput>"
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:411
+#: adminoptions.xml:414
 #, no-c-format
 msgid ""
 "You may then connect to the installation system with the <command>telnet</"
@@ -1156,19 +1219,19 @@ msgstr ""
 "lub adresu IP systemu instalacyjnego:"
 
 #. Tag: screen
-#: adminoptions.xml:417
+#: adminoptions.xml:420
 #, fuzzy, no-c-format
 msgid "<userinput>telnet computer.mydomain.com</userinput>"
 msgstr "telnet komputer.mojadomena.pl"
 
 #. Tag: title
-#: adminoptions.xml:419
+#: adminoptions.xml:422
 #, no-c-format
 msgid "Telnet Access Requires No Password"
 msgstr "DostÄ™p przez Telnet nie wymaga hasÅ‚a"
 
 #. Tag: para
-#: adminoptions.xml:421
+#: adminoptions.xml:424
 #, no-c-format
 msgid ""
 "To ensure the security of the installation process, only use the "
@@ -1180,13 +1243,13 @@ msgstr ""
 "ograniczonym dostÄ™pem."
 
 #. Tag: title
-#: adminoptions.xml:430
+#: adminoptions.xml:433
 #, no-c-format
 msgid "Logging to a Remote System During the Installation"
 msgstr "Zapisywanie dziennika na zdalnym systemie podczas instalacji"
 
 #. Tag: para
-#: adminoptions.xml:432
+#: adminoptions.xml:435
 #, fuzzy, no-c-format
 msgid ""
 "By default, the installation process sends log messages to the console as "
@@ -1201,7 +1264,7 @@ msgstr ""
 "firstterm>."
 
 #. Tag: para
-#: adminoptions.xml:442
+#: adminoptions.xml:445
 #, no-c-format
 msgid ""
 "To configure remote logging, add the <option>syslog</option> option. Specify "
@@ -1215,7 +1278,7 @@ msgstr ""
 "akceptujÄ…ce zdalne komunikaty nasÅ‚uchujÄ… na porcie UDP 514."
 
 #. Tag: para
-#: adminoptions.xml:449
+#: adminoptions.xml:452
 #, no-c-format
 msgid ""
 "For example, to connect to a syslog service on the system <systemitem class="
@@ -1227,7 +1290,7 @@ msgstr ""
 "<prompt>boot:</prompt>:"
 
 #. Tag: screen
-#: adminoptions.xml:457
+#: adminoptions.xml:460
 #, no-c-format
 msgid ""
 "<userinput>linux syslog=<replaceable>192.168.1.20:514</replaceable></"
@@ -1235,13 +1298,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:459
+#: adminoptions.xml:462
 #, no-c-format
 msgid "Configuring a Log Server"
 msgstr "Konfigurowanie serwera dziennika"
 
 #. Tag: para
-#: adminoptions.xml:461
+#: adminoptions.xml:464
 #, fuzzy, no-c-format
 msgid ""
 "Fedora uses <command>rsyslog</command> to provide a syslog service. The "
@@ -1253,13 +1316,13 @@ msgstr ""
 "zdalnych systemÃ³w."
 
 #. Tag: title
-#: adminoptions.xml:468
+#: adminoptions.xml:471
 #, no-c-format
 msgid "Only Enable Remote Syslog Access on Secured Networks"
 msgstr "WÅ‚Ä…czaj zdalny dostÄ™p do sysloga tylko w bezpiecznych sieciach"
 
 #. Tag: para
-#: adminoptions.xml:470
+#: adminoptions.xml:473
 #, fuzzy, no-c-format
 msgid ""
 "The <command>rsyslog</command> configuration detailed below does not make "
@@ -1277,7 +1340,7 @@ msgstr ""
 "sieÄ‡."
 
 #. Tag: para
-#: adminoptions.xml:481
+#: adminoptions.xml:484
 #, fuzzy, no-c-format
 msgid ""
 "To configure a Fedora system to accept log messages from other systems on "
@@ -1293,7 +1356,7 @@ msgstr ""
 "<command>SYSLOGD_OPTIONS</command>:"
 
 #. Tag: screen
-#: adminoptions.xml:488
+#: adminoptions.xml:491
 #, no-c-format
 msgid ""
 "<computeroutput>$ModLoad imudp.so</computeroutput>\n"
@@ -1301,20 +1364,20 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:490
+#: adminoptions.xml:493
 #, fuzzy, no-c-format
 msgid "Restart the <command>rsyslog</command> service to apply the change:"
 msgstr ""
 "Ponownie uruchom usÅ‚ugÄ™ <command>syslogd</command>, aby zastosowaÄ‡ zmianÄ™:"
 
 #. Tag: screen
-#: adminoptions.xml:494
+#: adminoptions.xml:497
 #, fuzzy, no-c-format
 msgid "<userinput>su -c '/sbin/service rsyslog restart'</userinput>"
 msgstr "su -c '/sbin/service syslog restart'"
 
 #. Tag: para
-#: adminoptions.xml:503
+#: adminoptions.xml:506
 #, fuzzy, no-c-format
 msgid ""
 "By default, the syslog service listens on UDP port 514. To permit "
@@ -1334,13 +1397,13 @@ msgstr ""
 "<userinput>udp</userinput> jako <guilabel>ProtokÃ³Å‚</guilabel>."
 
 #. Tag: title
-#: adminoptions.xml:519
+#: adminoptions.xml:522
 #, no-c-format
 msgid "Automating the Installation with Kickstart"
 msgstr "Automatyzowanie instalacji za pomocÄ… kickstart"
 
 #. Tag: para
-#: adminoptions.xml:521
+#: adminoptions.xml:524
 #, fuzzy, no-c-format
 msgid ""
 "A <indexterm> <primary>Kickstart</primary> </indexterm> "
@@ -1355,13 +1418,13 @@ msgstr ""
 "i zajÄ…Ä‡ siÄ™ procesem instalacji bez dalszego udziaÅ‚u uÅ¼ytkownika."
 
 #. Tag: title
-#: adminoptions.xml:532
+#: adminoptions.xml:535
 #, no-c-format
 msgid "Every Installation Produces a Kickstart File"
 msgstr "KaÅ¼da instalacja tworzy plik kickstart"
 
 #. Tag: para
-#: adminoptions.xml:533
+#: adminoptions.xml:536
 #, no-c-format
 msgid ""
 "The Fedora installation process automatically writes a Kickstart file that "
@@ -1377,7 +1440,7 @@ msgstr ""
 "okreÅ›liÄ‡ ustawienia dla innych systemÃ³w."
 
 #. Tag: para
-#: adminoptions.xml:542
+#: adminoptions.xml:545
 #, fuzzy, no-c-format
 msgid ""
 "Fedora includes a graphical application to create and modify Kickstart files "
@@ -1395,7 +1458,7 @@ msgstr ""
 "guimenuitem></menuchoice>."
 
 #. Tag: para
-#: adminoptions.xml:551
+#: adminoptions.xml:554
 #, no-c-format
 msgid ""
 "Kickstart files list installation settings in plain text, with one option "
@@ -1409,7 +1472,7 @@ msgstr ""
 "pliki kickstart dla rÃ³Å¼nych systemÃ³w."
 
 #. Tag: para
-#: adminoptions.xml:558
+#: adminoptions.xml:561
 #, no-c-format
 msgid ""
 "To automate the installation process with a Kickstart file, use the "
@@ -1419,7 +1482,7 @@ msgstr ""
 "<option>ks</option>, aby okreÅ›liÄ‡ nazwÄ™ i poÅ‚oÅ¼enie pliku:"
 
 #. Tag: screen
-#: adminoptions.xml:563
+#: adminoptions.xml:566
 #, no-c-format
 msgid ""
 "<userinput>linux ks=<replaceable>location/kickstart-file.cfg</replaceable></"
@@ -1427,7 +1490,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:564
+#: adminoptions.xml:567
 #, no-c-format
 msgid ""
 "You may use Kickstart files that are held on either removable storage, a "
@@ -1439,63 +1502,63 @@ msgstr ""
 "kssources\"/>, aby poznaÄ‡ obsÅ‚ugiwane ÅºrÃ³dÅ‚a kickstart."
 
 #. Tag: title
-#: adminoptions.xml:571
+#: adminoptions.xml:574
 #, fuzzy, no-c-format
 msgid "Kickstart sources"
 msgstr "Å¹rÃ³dÅ‚a kickstart"
 
 #. Tag: entry
-#: adminoptions.xml:577
+#: adminoptions.xml:580
 #, fuzzy, no-c-format
 msgid "Kickstart source"
 msgstr "Å¹rÃ³dÅ‚o kickstart"
 
 #. Tag: option
-#: adminoptions.xml:584
+#: adminoptions.xml:587
 #, fuzzy, no-c-format
 msgid "ks=<replaceable>cdrom:/directory/ks.cfg</replaceable>"
 msgstr "cdrom:/folder/ks.cfg"
 
 #. Tag: option
-#: adminoptions.xml:588
+#: adminoptions.xml:591
 #, fuzzy, no-c-format
 msgid "ks=<replaceable>hd:/device/directory/ks.cfg</replaceable>"
 msgstr "hd:/urzÄ…dzenie/folder/ks.cfg"
 
 #. Tag: entry
-#: adminoptions.xml:591
+#: adminoptions.xml:594
 #, no-c-format
 msgid "Other Device"
 msgstr "Inne urzÄ…dzenie"
 
 #. Tag: option
-#: adminoptions.xml:592
+#: adminoptions.xml:595
 #, fuzzy, no-c-format
 msgid "ks=<replaceable>file:/device/directory/ks.cfg</replaceable>"
 msgstr "file:/urzÄ…dzenie/folder/ks.cfg"
 
 #. Tag: option
-#: adminoptions.xml:596
+#: adminoptions.xml:599
 #, fuzzy, no-c-format
 msgid ""
 "ks=<replaceable>http://server.mydomain.com/directory/ks.cfg</replaceable>"
 msgstr "http://serwer.mojadomena.pl/folder/ks.cfg"
 
 #. Tag: option
-#: adminoptions.xml:600
+#: adminoptions.xml:603
 #, fuzzy, no-c-format
 msgid ""
 "ks=<replaceable>ftp://server.mydomain.com/directory/ks.cfg</replaceable>"
 msgstr "ftp://serwer.mojadomena.pl/folder/ks.cfg"
 
 #. Tag: option
-#: adminoptions.xml:604
+#: adminoptions.xml:607
 #, fuzzy, no-c-format
 msgid "ks=<replaceable>nfs:server.mydomain.com:/directory/ks.cfg</replaceable>"
 msgstr "nfs:serwer.mojadomena.pl:/folder/ks.cfg"
 
 #. Tag: para
-#: adminoptions.xml:609
+#: adminoptions.xml:612
 #, no-c-format
 msgid ""
 "To obtain a Kickstart file from a script or application on a Web server, "
@@ -1514,7 +1577,7 @@ msgstr ""
 "mojadomena.pl/kickstart.cgi</wordasword>:"
 
 #. Tag: screen
-#: adminoptions.xml:619
+#: adminoptions.xml:622
 #, fuzzy, no-c-format
 msgid ""
 "<userinput>linux ks=http://server.mydomain.com/kickstart.cgi kssendmac</"
@@ -1522,13 +1585,13 @@ msgid ""
 msgstr "linux ks=http://serwer.mojadomena.pl/kickstart.cgi kssendmac"
 
 #. Tag: title
-#: adminoptions.xml:622
+#: adminoptions.xml:625
 #, no-c-format
 msgid "Enhancing Hardware Support"
 msgstr "Ulepszanie obsÅ‚ugi sprzÄ™tu"
 
 #. Tag: para
-#: adminoptions.xml:624
+#: adminoptions.xml:627
 #, no-c-format
 msgid ""
 "By default, Fedora attempts to automatically detect and configure support "
@@ -1546,184 +1609,13 @@ msgstr ""
 "pÃ³Åºniejszym czasie."
 
 #. Tag: title
-#: adminoptions.xml:635
-#, no-c-format
-msgid "Adding Hardware Support with Driver Disks"
-msgstr "Dodawanie obsÅ‚ugi sprzÄ™tu za pomocÄ… dyskÃ³w ze sterownikami"
-
-#. Tag: para
-#: adminoptions.xml:637
-#, no-c-format
-msgid ""
-"The installation system can load drivers from disks, pen drives, or network "
-"servers to configure support for new devices. After the installation is "
-"complete, remove any driver disks and store them for later use."
-msgstr ""
-"System instalacyjny moÅ¼e wczytaÄ‡ sterowniki z dyskietek, kluczy USB lub "
-"serwerÃ³w sieciowych, aby skonfigurowaÄ‡ obsÅ‚ugÄ™ nowych urzÄ…dzeÅ„. Gdy "
-"instalacja zostanie zakoÅ„czona, usuÅ„ wszystkie dyski ze sterownikami i "
-"przechowuj je do pÃ³Åºniejszego uÅ¼ycia."
-
-#. Tag: para
-#: adminoptions.xml:644
-#, fuzzy, no-c-format
-msgid ""
-"Hardware manufacturers may supply <indexterm> <primary>driver disks</"
-"primary> </indexterm> driver disks for Fedora with the device, or provide "
-"image files to prepare the disks. To obtain the latest drivers, download the "
-"correct file from the website of the manufacturer."
-msgstr ""
-"Producenci sprzÄ™tu mogÄ… dostarczaÄ‡ <indexterm><primary>dysk ze sterownikami</"
-"primary></indexterm> dyski ze sterownikami dla Fedory razem z urzÄ…dzeniam "
-"lub dostarczaÄ‡ pliki obrazÃ³w do przygotowania ich. Aby uzyskaÄ‡ najnowsze "
-"sterowniki, pobierz prawidÅ‚owy plik ze strony WWW producenta."
-
-#. Tag: title
-#: adminoptions.xml:655
-#, no-c-format
-msgid "Driver Disks Supplied as Zipped Files"
-msgstr "Dyski ze sterownikami dostarczane jako pliki zip"
-
-#. Tag: para
-#: adminoptions.xml:657
-#, fuzzy, no-c-format
-msgid ""
-"Driver disk images may be distributed as compressed archives, or zip files. "
-"For identification, the names of zip files include the extensions <filename>."
-"zip</filename>, or <filename>.tar.gz</filename>. To extract the contents of "
-"a zipped file with a Fedora system, choose <menuchoice> "
-"<guimenu>Applications</guimenu> <guisubmenu>Accessories</"
-"guisubmenu><guimenuitem>Archive Manager</guimenuitem></menuchoice>."
-msgstr ""
-"Obrazy dyskÃ³w ze sterownikami mogÄ… byÄ‡ rozpowszechniane jako skompresowane "
-"archiwa lub pliki zip. W celu identyfikacji nazwy plikÃ³w zip zawierajÄ… "
-"rozszerzenie <filename>.zip</filename> lub <filename>.tar.gz</filename>. Aby "
-"rozpakowaÄ‡ ich zawartoÅ›Ä‡ w systemie Fedora, wybierz "
-"<menuchoice><guimenu>Aplikacje</guimenu><guisubmenu>Akcesoria</"
-"guisubmenu><guimenuitem>MenedÅ¼er archiwÃ³w</guimenuitem></menuchoice>."
-
-#. Tag: para
-#: adminoptions.xml:668
-#, no-c-format
-msgid ""
-"To format a disk or pen drive with an image file, use the <command>dd</"
-"command> utility. For example, to prepare a diskette with the image file "
-"<filename>drivers.img</filename>, enter this command in a terminal window:"
-msgstr ""
-"Aby sformatowaÄ‡ dyskietkÄ™ lub klucz USB plikiem obrazu, uÅ¼yj narzÄ™dzia "
-"<command>dd</command>. Na przykÅ‚ad aby przygotowaÄ‡ dyskietkÄ™ z plikiem "
-"obrazu <filename>sterowniki.img</filename>, podaj to polecenie z oknie "
-"terminala:"
-
-#. Tag: screen
-#: adminoptions.xml:674
-#, fuzzy, no-c-format
-msgid "<userinput>dd if=drivers.img of=/dev/fd0</userinput>"
-msgstr "dd if=sterowniki.img of=/dev/fd0"
-
-#. Tag: para
-#: adminoptions.xml:675
-#, no-c-format
-msgid ""
-"To use a driver disk in the installation process, specify the <option>dd</"
-"option> option at the <prompt>boot:</prompt> prompt:"
-msgstr ""
-"Aby uÅ¼yÄ‡ dysku ze sterownikami w procesie instalacji, okreÅ›l opcjÄ™ "
-"<option>dd</option> po znaku zachÄ™ty <prompt>boot:</prompt>:"
-
-#. Tag: screen
-#: adminoptions.xml:681
-#, no-c-format
-msgid "<userinput>linux dd</userinput>"
-msgstr ""
-
-#. Tag: para
-#: adminoptions.xml:683
-#, no-c-format
-msgid ""
-"Note that the <option>dd</option> option is interchangeable with the "
-"<option>driverdisk</option> option."
-msgstr ""
-
-#. Tag: para
-#: adminoptions.xml:687
-#, no-c-format
-msgid ""
-"When prompted, select <guibutton>Yes</guibutton> to provide a driver disk. "
-"Choose the drive that holds the driver disk from the list on the "
-"<guilabel>Driver Disk Source</guilabel> text screen."
-msgstr ""
-"Wybierz <guibutton>Tak</guibutton>, aby dostarczyÄ‡ dysk ze sterownikami. "
-"Wybierz dysk, ktÃ³ry przechowuje dysk ze sterownikami z listy na ekranie "
-"tekstowym <guilabel>Dyskietka ze sterownikami</guilabel>."
-
-#. Tag: para
-#: adminoptions.xml:693
-#, no-c-format
-msgid ""
-"The installation system can also read drivers from disk images that are held "
-"on network servers. Refer to <xref linkend=\"tb-driversources\"/> for the "
-"supported sources of driver disk image files."
-msgstr ""
-"System instalacyjny moÅ¼e odczytaÄ‡ sterowniki takÅ¼e z obrazÃ³w dyskÃ³w "
-"przechowywanych na serwerach sieciowych. Zobacz <xref linkend=\"tb-"
-"driversources\"/>, aby poznaÄ‡ obsÅ‚ugiwane ÅºrÃ³dÅ‚a plikÃ³w obrazÃ³w dyskÃ³w ze "
-"sterownikami."
-
-#. Tag: title
-#: adminoptions.xml:699
-#, fuzzy, no-c-format
-msgid "Driver disk image sources"
-msgstr "Å¹rÃ³dÅ‚a obrazÃ³w dyskÃ³w ze sterownikami"
-
-#. Tag: entry
-#: adminoptions.xml:705
-#, fuzzy, no-c-format
-msgid "Image source"
-msgstr "Å¹rÃ³dÅ‚o obrazu"
-
-#. Tag: entry
-#: adminoptions.xml:711
-#, no-c-format
-msgid "Select a drive or device"
-msgstr "Wybierz dysk lub urzÄ…dzenie"
-
-#. Tag: option
-#: adminoptions.xml:712
-#, no-c-format
-msgid "<option>dd</option>"
-msgstr ""
-
-#. Tag: option
-#: adminoptions.xml:716
-#, fuzzy, no-c-format
-msgid ""
-"dd=<replaceable>http://server.mydomain.com/directory/drivers.img</"
-"replaceable>"
-msgstr "http://serwer.mojadomena.pl/folder/sterowniki.img"
-
-#. Tag: option
-#: adminoptions.xml:720
-#, fuzzy, no-c-format
-msgid ""
-"dd=<replaceable>ftp://server.mydomain.com/directory/drivers.img</replaceable>"
-msgstr "ftp://serwer.mojadomena.pl/folder/sterowniki.img"
-
-#. Tag: option
-#: adminoptions.xml:724
-#, fuzzy, no-c-format
-msgid ""
-"dd=<replaceable>nfs:server.mydomain.com:/directory/drivers.img</replaceable>"
-msgstr "nfs:serwer.mojadomena.pl:/folder/sterowniki.img"
-
-#. Tag: title
-#: adminoptions.xml:731
+#: adminoptions.xml:638
 #, no-c-format
 msgid "Overriding Automatic Hardware Detection"
 msgstr "ZastÄ™powanie automatycznego wykrywania sprzÄ™tu"
 
 #. Tag: para
-#: adminoptions.xml:733
+#: adminoptions.xml:640
 #, no-c-format
 msgid ""
 "For some models of device automatic hardware configuration may fail, or "
@@ -1737,13 +1629,13 @@ msgstr ""
 "aby rÄ™cznie skonfigurowaÄ‡ urzÄ…dzenie po zakoÅ„czeniu procesu instalacji."
 
 #. Tag: title
-#: adminoptions.xml:741
+#: adminoptions.xml:648
 #, no-c-format
 msgid "Check the Release Notes"
 msgstr "SprawdÅº Informacje o wydaniu"
 
 #. Tag: para
-#: adminoptions.xml:742
+#: adminoptions.xml:649
 #, no-c-format
 msgid ""
 "Refer to the Release Notes for information on known issues with specific "
@@ -1753,7 +1645,7 @@ msgstr ""
 "okreÅ›lonymi  urzÄ…dzeniami."
 
 #. Tag: para
-#: adminoptions.xml:747
+#: adminoptions.xml:654
 #, no-c-format
 msgid ""
 "To override the automatic hardware detection, use one or more of the "
@@ -1763,43 +1655,43 @@ msgstr ""
 "poniÅ¼szych opcji:"
 
 #. Tag: title
-#: adminoptions.xml:752
+#: adminoptions.xml:659
 #, no-c-format
 msgid "Hardware Options"
 msgstr "Opcje sprzÄ™tu"
 
 #. Tag: entry
-#: adminoptions.xml:758
+#: adminoptions.xml:665
 #, fuzzy, no-c-format
 msgid "Compatibility"
 msgstr "Ustawienie zgodnoÅ›ci"
 
 #. Tag: entry
-#: adminoptions.xml:759
+#: adminoptions.xml:666
 #, no-c-format
 msgid "Option"
 msgstr "Opcja"
 
 #. Tag: entry
-#: adminoptions.xml:764
+#: adminoptions.xml:671
 #, no-c-format
 msgid "Disable all hardware detection"
 msgstr "WyÅ‚Ä…cz wykrywanie sprzÄ™tu"
 
 #. Tag: entry
-#: adminoptions.xml:768
+#: adminoptions.xml:675
 #, no-c-format
 msgid "Disable graphics, keyboard, and mouse detection"
 msgstr "WyÅ‚Ä…cz wykrywanie grafiki, klawiatury i myszy"
 
 #. Tag: option
-#: adminoptions.xml:769
+#: adminoptions.xml:676
 #, no-c-format
 msgid "headless"
 msgstr "headless"
 
 #. Tag: entry
-#: adminoptions.xml:772
+#: adminoptions.xml:679
 #, no-c-format
 msgid ""
 "Disable passing keyboard and mouse information to stage 2 of the "
@@ -1807,61 +1699,61 @@ msgid ""
 msgstr ""
 
 #. Tag: entry
-#: adminoptions.xml:776
+#: adminoptions.xml:683
 #, no-c-format
 msgid "Use basic VESA driver for video"
 msgstr "UÅ¼yj podstawowego sterownika VESA dla obrazu"
 
 #. Tag: option
-#: adminoptions.xml:777
+#: adminoptions.xml:684
 #, no-c-format
 msgid "xdriver=vesa"
 msgstr "xdriver=vesa"
 
 #. Tag: entry
-#: adminoptions.xml:780
+#: adminoptions.xml:687
 #, no-c-format
 msgid "Disable shell access on virtual console 2 during installation"
 msgstr ""
 
 #. Tag: entry
-#: adminoptions.xml:784
+#: adminoptions.xml:691
 #, no-c-format
 msgid "Disable advanced configuration and power interface (ACPI)"
 msgstr ""
 
 #. Tag: option
-#: adminoptions.xml:785
+#: adminoptions.xml:692
 #, no-c-format
 msgid "acpi=off"
 msgstr "acpi=off"
 
 #. Tag: entry
-#: adminoptions.xml:788
+#: adminoptions.xml:695
 #, no-c-format
 msgid "Disable machine check exception (MCE) CPU self-diagnosis."
 msgstr ""
 
 #. Tag: option
-#: adminoptions.xml:789
+#: adminoptions.xml:696
 #, fuzzy, no-c-format
 msgid "nomce"
 msgstr "nopcmcia"
 
 #. Tag: entry
-#: adminoptions.xml:792
+#: adminoptions.xml:699
 #, no-c-format
 msgid "Disable non-uniform menory access on the AMD64 architecture"
 msgstr ""
 
 #. Tag: option
-#: adminoptions.xml:793
+#: adminoptions.xml:700
 #, no-c-format
 msgid "numa-off"
 msgstr ""
 
 #. Tag: entry
-#: adminoptions.xml:796
+#: adminoptions.xml:703
 #, no-c-format
 msgid ""
 "Force kernel to detect a specific amount of memory, where <replaceable>xxx</"
@@ -1869,79 +1761,79 @@ msgid ""
 msgstr ""
 
 #. Tag: option
-#: adminoptions.xml:797
+#: adminoptions.xml:704
 #, fuzzy, no-c-format
 msgid "mem=<replaceable>xxx</replaceable>m"
 msgstr "cdrom:/folder/ks.cfg"
 
 #. Tag: entry
-#: adminoptions.xml:800
+#: adminoptions.xml:707
 #, no-c-format
 msgid "Enable DMA only for IDE and SATA drives"
 msgstr "WÅ‚Ä…cz DMA tylko dla napÄ™dÃ³w IDE i SATA"
 
 #. Tag: option
-#: adminoptions.xml:801
+#: adminoptions.xml:708
 #, no-c-format
 msgid "libata.dma=1"
 msgstr "libata.dma=1"
 
 #. Tag: entry
-#: adminoptions.xml:804
+#: adminoptions.xml:711
 #, no-c-format
 msgid "Disable BIOS-assisted RAID"
 msgstr "WyÅ‚Ä…cz RAID BIOS-u"
 
 #. Tag: option
-#: adminoptions.xml:805
+#: adminoptions.xml:712
 #, no-c-format
 msgid "nodmraid"
 msgstr "nodmraid"
 
 #. Tag: entry
-#: adminoptions.xml:808
+#: adminoptions.xml:715
 #, no-c-format
 msgid "Disable Firewire device detection"
 msgstr "WyÅ‚Ä…cz wykrywanie urzÄ…dzeÅ„ Firewire"
 
 #. Tag: entry
-#: adminoptions.xml:812
+#: adminoptions.xml:719
 #, no-c-format
 msgid "Disable parallel port detection"
 msgstr "WyÅ‚Ä…cz wykrywanie portu rÃ³wnolegÅ‚ego"
 
 #. Tag: entry
-#: adminoptions.xml:816
+#: adminoptions.xml:723
 #, no-c-format
 msgid "Disable PC Card (PCMCIA) device detection"
 msgstr "WyÅ‚Ä…cz wykrywanie urzÄ…dzeÅ„ PC Card (PCMCIA)"
 
 #. Tag: entry
-#: adminoptions.xml:820
+#: adminoptions.xml:727
 #, no-c-format
 msgid "Disable USB storage device detection"
 msgstr "WyÅ‚Ä…cz wykrywanie urzÄ…dzeÅ„ pamiÄ™ci masowej USB"
 
 #. Tag: entry
-#: adminoptions.xml:824
+#: adminoptions.xml:731
 #, no-c-format
 msgid "Disable all USB device detection"
 msgstr "WyÅ‚Ä…cz wykrywanie wszystkich urzÄ…dzeÅ„ USB"
 
 #. Tag: entry
-#: adminoptions.xml:828
+#: adminoptions.xml:735
 #, no-c-format
 msgid "Disable all probing of network hardware"
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:835
+#: adminoptions.xml:742
 #, no-c-format
 msgid "Additional Screen"
 msgstr "Dodatkowy ekran"
 
 #. Tag: para
-#: adminoptions.xml:837
+#: adminoptions.xml:744
 #, no-c-format
 msgid ""
 "The <option>isa</option> option causes the system to display an additional "
@@ -1953,7 +1845,7 @@ msgstr ""
 "urzÄ…dzenia ISA komputera."
 
 #. Tag: para
-#: adminoptions.xml:846
+#: adminoptions.xml:753
 #, no-c-format
 msgid ""
 "Other kernel boot options have no particular meaning for "
@@ -1964,19 +1856,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:855
+#: adminoptions.xml:762
 #, no-c-format
 msgid "Using the Maintenance Boot Modes"
 msgstr "UÅ¼ywanie trybÃ³w startowych zarzÄ…dzania"
 
 #. Tag: title
-#: adminoptions.xml:858
+#: adminoptions.xml:765
 #, no-c-format
 msgid "Loading the Memory (RAM) Testing Mode"
 msgstr "Wczytywanie trybu testowania pamiÄ™ci (RAM)"
 
 #. Tag: para
-#: adminoptions.xml:860
+#: adminoptions.xml:767
 #, no-c-format
 msgid ""
 "Faults in memory modules may cause your system to freeze or crash "
@@ -1992,14 +1884,14 @@ msgstr ""
 "jeÅ›li poprzednio byÅ‚ uruchomiony inny system operacyjny."
 
 #. Tag: para
-#: adminoptions.xml:869
+#: adminoptions.xml:776
 #, fuzzy, no-c-format
 msgid ""
-"Fedora includes the <application>Memtest86</application> memory testing "
+"Fedora includes the <application>Memtest86+</application> memory testing "
 "application. To boot your computer in <indexterm> <primary>memory testing "
 "mode</primary> </indexterm> memory testing mode, choose <guimenuitem>Memory "
 "test</guimenuitem> at the boot menu. The first test starts immediately. By "
-"default, <application>Memtest86</application> carries out a total of ten "
+"default, <application>Memtest86+</application> carries out a total of ten "
 "tests."
 msgstr ""
 "Fedora zawiera aplikacjÄ™ testowania pamiÄ™ci <application>Memtest86</"
@@ -2010,7 +1902,28 @@ msgstr ""
 "caÅ‚oÅ›Ä‡ dziesiÄ™ciu testÃ³w."
 
 #. Tag: para
-#: adminoptions.xml:880
+#: adminoptions.xml:787
+#, no-c-format
+msgid ""
+"In most cases, a single successful pass with <application>Memtest86+</"
+"application> is sufficient to verify that your RAM is in good condition. In "
+"some rare circumstances, however, errors that went undetected on the first "
+"pass might appear on subsequent passes. To perform a thorough test of the "
+"RAM on an important system, leave <application>Memtest86+</application> "
+"running overnight or for a few days."
+msgstr ""
+
+#. Tag: para
+#: adminoptions.xml:790
+#, no-c-format
+msgid ""
+"For more information on using <application>Memtest86+</application>, refer "
+"to the <citetitle>Memtest86+ FAQ</citetitle> available at <ulink url="
+"\"http://forum.canardpc.com/showthread.php?t=28864\"></ulink>."
+msgstr ""
+
+#. Tag: para
+#: adminoptions.xml:793
 #, no-c-format
 msgid ""
 "To halt the tests and reboot your computer, enter <keycap>Esc</keycap> at "
@@ -2020,13 +1933,13 @@ msgstr ""
 "keycap> w dowolnym czasie."
 
 #. Tag: title
-#: adminoptions.xml:887
+#: adminoptions.xml:800
 #, no-c-format
 msgid "Verifying boot media"
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:888
+#: adminoptions.xml:801
 #, no-c-format
 msgid ""
 "You can test the integrity of an ISO-based installation source before using "
@@ -2037,13 +1950,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:891
+#: adminoptions.xml:804
 #, no-c-format
 msgid "Fedora offers you three ways to test installation ISOs:"
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:896
+#: adminoptions.xml:809
 #, no-c-format
 msgid ""
 "select the <guilabel>Verify and Boot</guilabel> option on the Fedora Live "
@@ -2052,7 +1965,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:901
+#: adminoptions.xml:814
 #, no-c-format
 msgid ""
 "select <guilabel>OK</guilabel> at the prompt to test the media before "
@@ -2060,19 +1973,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:906
+#: adminoptions.xml:819
 #, no-c-format
 msgid "boot Fedora with the option <option>mediacheck</option> option."
 msgstr ""
 
 #. Tag: title
-#: adminoptions.xml:914
+#: adminoptions.xml:827
 #, no-c-format
 msgid "Booting Your Computer with the Rescue Mode"
 msgstr "Uruchamianie komputera w trybie ratunkowym"
 
 #. Tag: para
-#: adminoptions.xml:918
+#: adminoptions.xml:831
 #, fuzzy, no-c-format
 msgid ""
 "You may boot a command-line Linux system from either a <indexterm> "
@@ -2088,7 +2001,7 @@ msgstr ""
 "zainstalowane na komputerze."
 
 #. Tag: para
-#: adminoptions.xml:929
+#: adminoptions.xml:842
 #, no-c-format
 msgid ""
 "The rescue disc starts the rescue mode system by default. To load the rescue "
@@ -2100,7 +2013,7 @@ msgstr ""
 "zainstalowany system</guimenuitem> z menu startowego."
 
 #. Tag: para
-#: adminoptions.xml:935
+#: adminoptions.xml:848
 #, no-c-format
 msgid ""
 "Specify the language, keyboard layout and network settings for the rescue "
@@ -2112,7 +2025,7 @@ msgstr ""
 "istniejÄ…cego systemu komputera."
 
 #. Tag: para
-#: adminoptions.xml:942
+#: adminoptions.xml:855
 #, no-c-format
 msgid ""
 "By default, rescue mode attaches an existing operating system to the rescue "
@@ -2122,13 +2035,13 @@ msgstr ""
 "ratunkowego pod folderem <filename>/mnt/sysimage/</filename>."
 
 #. Tag: title
-#: adminoptions.xml:950
+#: adminoptions.xml:863
 #, no-c-format
 msgid "Upgrading your computer"
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:952
+#: adminoptions.xml:865
 #, no-c-format
 msgid ""
 "A previous boot option, <option>upgrade</option>, has been superceded by a "
@@ -2138,7 +2051,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: adminoptions.xml:956
+#: adminoptions.xml:869
 #, no-c-format
 msgid ""
 "However, the installation program may not correctly detect a previous "
@@ -2180,7 +2093,7 @@ msgstr ""
 msgid ""
 "Each kernel installed on your system requires approximately 10 MB on the "
 "<filename class=\"partition\">/boot</filename> partition. Unless you plan to "
-"install a great many kernels, the default partition size of 100 MB for "
+"install a great many kernels, the default partition size of 250 MB for "
 "<filename class=\"partition\">/boot</filename> should suffice."
 msgstr ""
 "KaÅ¼de zainstalowane w systemie jÄ…dro wymaga okoÅ‚o 6 MB na partycji <filename "
@@ -2189,15 +2102,7 @@ msgstr ""
 "\"partition\">/boot</filename> powinien wystarczyÄ‡."
 
 #. Tag: para
-#: Advice_on_Partitions.xml:31
-#, no-c-format
-msgid ""
-"The <application>GRUB</application> bootloader does not support the ext4 "
-"file system. You cannot use an ext4 partition for <filename>/boot</filename>."
-msgstr ""
-
-#. Tag: para
-#: Advice_on_Partitions.xml:37
+#: Advice_on_Partitions.xml:32
 #, no-c-format
 msgid ""
 "The <filename class=\"directory\">/var</filename> directory holds content "
@@ -2209,13 +2114,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Advice_on_Partitions.xml:46
+#: Advice_on_Partitions.xml:41
 #, no-c-format
 msgid "Pending Updates"
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:47
+#: Advice_on_Partitions.xml:42
 #, no-c-format
 msgid ""
 "Because Fedora is a rapidly progressing collection of software, many updates "
@@ -2225,7 +2130,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:56
+#: Advice_on_Partitions.xml:51
 #, no-c-format
 msgid ""
 "The <filename class=\"directory\">/usr</filename> directory holds the "
@@ -2236,7 +2141,7 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Advice_on_Partitions.xml:64
+#: Advice_on_Partitions.xml:59
 #, fuzzy, no-c-format
 msgid ""
 "Do not place <filename class=\"directory\">/usr</filename> on a separate "
@@ -2244,7 +2149,7 @@ msgid ""
 msgstr "Root i <filename class=\"directory\">/root</filename>"
 
 #. Tag: para
-#: Advice_on_Partitions.xml:65
+#: Advice_on_Partitions.xml:60
 #, no-c-format
 msgid ""
 "If <filename class=\"directory\">/usr</filename> is on a separate partition "
@@ -2254,7 +2159,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:69
+#: Advice_on_Partitions.xml:64
 #, no-c-format
 msgid ""
 "Consider leaving a portion of the space in an LVM volume group unallocated. "
@@ -2264,7 +2169,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:76
+#: Advice_on_Partitions.xml:71
 #, no-c-format
 msgid ""
 "If you separate subdirectories into partitions, you can retain content in "
@@ -2276,7 +2181,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:86
+#: Advice_on_Partitions.xml:81
 #, no-c-format
 msgid ""
 "The following table is a possible partition setup for a system with a "
@@ -2285,63 +2190,63 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Advice_on_Partitions.xml:91
+#: Advice_on_Partitions.xml:86
 #, no-c-format
 msgid "Example Usage"
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:92
+#: Advice_on_Partitions.xml:87
 #, no-c-format
 msgid "This setup is not optimal for all use cases."
 msgstr ""
 
 #. Tag: title
-#: Advice_on_Partitions.xml:95 Advice_on_Partitions.xml:97
+#: Advice_on_Partitions.xml:90 Advice_on_Partitions.xml:92
 #, no-c-format
 msgid "Example partition setup"
 msgstr ""
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:101 Advice_on_Partitions.xml:129
+#: Advice_on_Partitions.xml:96 Advice_on_Partitions.xml:124
 #, fuzzy, no-c-format
 msgid "Partition"
 msgstr "Partycjonowanie dysku"
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:102 Advice_on_Partitions.xml:130
+#: Advice_on_Partitions.xml:97 Advice_on_Partitions.xml:125
 #, fuzzy, no-c-format
 msgid "Size and type"
 msgstr "Typ noÅ›nika"
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:108
+#: Advice_on_Partitions.xml:103
 #, fuzzy, no-c-format
-msgid "100 MB <systemitem class=\"filesystem\">ext3</systemitem> partition"
+msgid "250 MB <systemitem class=\"filesystem\">ext4</systemitem> partition"
 msgstr ""
 "Kiedy zostaniesz o to poproszony, podaj hasÅ‚o <systemitem class=\"username"
 "\">roota</systemitem>."
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:113
+#: Advice_on_Partitions.xml:108
 #, no-c-format
 msgid "2 GB swap"
 msgstr ""
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:116
+#: Advice_on_Partitions.xml:111
 #, no-c-format
 msgid "LVM physical volume"
 msgstr ""
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:117
+#: Advice_on_Partitions.xml:112
 #, no-c-format
 msgid "Remaining space, as one LVM volume group"
 msgstr ""
 
 #. Tag: para
-#: Advice_on_Partitions.xml:123
+#: Advice_on_Partitions.xml:118
 #, no-c-format
 msgid ""
 "The physical volume is assigned to the default volume group and divided into "
@@ -2349,36 +2254,34 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Advice_on_Partitions.xml:125
+#: Advice_on_Partitions.xml:120
 #, no-c-format
 msgid "Example partition setup: LVM physical volume"
 msgstr ""
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:136
+#: Advice_on_Partitions.xml:131
 #, fuzzy, no-c-format
 msgid "13 GB ext4"
 msgstr "3 GB ext3"
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:140
+#: Advice_on_Partitions.xml:135
 #, fuzzy, no-c-format
 msgid "4 GB ext4"
 msgstr "4 GB ext3"
 
 #. Tag: entry
-#: Advice_on_Partitions.xml:144
+#: Advice_on_Partitions.xml:139
 #, fuzzy, no-c-format
 msgid "50 GB ext4"
 msgstr "50 GB ext3"
 
-#. Tag: author
+#. Tag: corpauthor
 #: Author_Group.xml:5
-#, no-c-format
-msgid ""
-"<firstname>Fedora</firstname> <surname>Documentation Project</surname> "
-"<email>fedora-docs-list at redhat.com</email>"
-msgstr ""
+#, fuzzy, no-c-format
+msgid "Fedora Documentation Project"
+msgstr "Projekt dokumentacji Linuksa (LDP)"
 
 #. Tag: para
 #: Automatic_Partitioning_common-caution-1.xml:11
@@ -2406,10 +2309,9 @@ msgstr ""
 #: Automatic_Partitioning_common-itemizedlist-1.xml:7
 #, no-c-format
 msgid ""
-"<guilabel>Remove all partitions on selected drives and create default "
-"layout</guilabel> — select this option to remove all partitions on "
-"your hard drive(s) (this includes partitions created by other operating "
-"systems such as Windows VFAT or NTFS partitions)."
+"<guilabel>Use entire drive</guilabel> — select this option to remove "
+"all partitions on your hard drive(s) (this includes partitions created by "
+"other operating systems such as Windows VFAT or NTFS partitions)."
 msgstr ""
 
 #. Tag: para
@@ -2426,21 +2328,40 @@ msgstr ""
 #: Automatic_Partitioning_common-itemizedlist-1.xml:20
 #, no-c-format
 msgid ""
-"<guilabel>Remove Linux partitions on selected drives and create default "
-"layout</guilabel> — select this option to remove only Linux partitions "
-"(partitions created from a previous Linux installation). This does not "
-"remove other partitions you may have on your hard drive(s) (such as VFAT or "
-"FAT32 partitions)."
+"<guilabel>Replace existing Linux system</guilabel> — select this "
+"option to remove only Linux partitions (partitions created from a previous "
+"Linux installation). This does not remove other partitions you may have on "
+"your hard drive(s) (such as VFAT or FAT32 partitions)."
 msgstr ""
 
 #. Tag: para
 #: Automatic_Partitioning_common-itemizedlist-1.xml:29
 #, no-c-format
 msgid ""
-"<guilabel>Use free space on selected drives and create default layout</"
-"guilabel> — select this option to retain your current data and "
-"partitions, assuming you have enough free space available on your hard drive"
-"(s)."
+"<guilabel>Shrink existing system</guilabel> — select this option to "
+"resize your current data and partitions manually and install a default "
+"Fedora layout in the space that is freed."
+msgstr ""
+
+#. Tag: para
+#: Automatic_Partitioning_common-itemizedlist-1.xml:35
+#, no-c-format
+msgid ""
+"If you shrink partitions on which other operating systems are installed, you "
+"might not be able to use those operating systems. Although this partitioning "
+"option does not destroy data, operating systems typically require some free "
+"space in their partitions. Before you resize a partition that holds an "
+"operating system that you might want to use again, find out how much space "
+"you need to leave free."
+msgstr ""
+
+#. Tag: para
+#: Automatic_Partitioning_common-itemizedlist-1.xml:42
+#, no-c-format
+msgid ""
+"<guilabel>Use free space</guilabel> — select this option to retain "
+"your current data and partitions, assuming you have enough free space "
+"available on your hard drive(s)."
 msgstr ""
 
 #. Tag: para
@@ -2614,20 +2535,12 @@ msgstr ""
 #, no-c-format
 msgid ""
 "The <guilabel>Select Partition</guilabel> screen applies only if you are "
-"installing from a disk partition (that is, if you selected <guimenuitem>Hard "
+"installing from a disk partition (that is, if you used the "
+"<literal>askmethod</literal> boot options and selected <guimenuitem>Hard "
 "Drive</guimenuitem> in the <guilabel>Installation Method</guilabel> dialog). "
 "This dialog allows you to name the disk partition and directory from which "
-"you are installing Fedora."
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_Hard_Disk_common-para-2.xml:5
-#, no-c-format
-msgid ""
-"Enter the device name of the partition containing the Fedora ISO images. "
-"This partition must be formatted with a ext2 or vfat filesystem, and cannot "
-"be a logical volume. There is also a field labeled <guilabel>Directory "
-"holding images</guilabel>."
+"you are installing Fedora. If you used the <literal>repo=hd</literal>boot "
+"option, you already specified a partition."
 msgstr ""
 
 #. Tag: para
@@ -2644,14 +2557,6 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Beginning_Installation_Hard_Disk_common-para-4.xml:8
-#, no-c-format
-msgid ""
-"After you have identified the disk partition, the <guilabel>Welcome</"
-"guilabel> dialog appears."
-msgstr ""
-
-#. Tag: para
 #: Beginning_Installation_Hard_Disk_common-para-5.xml:5
 #, fuzzy, no-c-format
 msgid ""
@@ -2703,10 +2608,10 @@ msgstr ""
 #: Beginning_Installation_Hard_Disk_common-screen-1.xml:5
 #, no-c-format
 msgid ""
-"<command><![CDATA[mount -t iso9660 /path/to/Fedora11.iso /mnt/point -o loop,"
-"ro]]></command>\n"
-"  <command><![CDATA[cp -pr /mnt/point/images /path/images/]]></command>\n"
-"  <command><![CDATA[umount /mnt/point]]></command>"
+"<command>mount -t iso9660 /path/to/Fedora&PRODVER;.iso /mnt/point -o loop,"
+"ro</command>\n"
+"  <command>cp -pr /mnt/point/images /path/images/</command>\n"
+"  <command>umount /mnt/point</command>"
 msgstr ""
 
 #. Tag: title
@@ -2742,7 +2647,7 @@ msgstr ""
 #. Tag: entry
 #: Beginning_Installation_Hard_Disk_common-table-1.xml:17
 #, no-c-format
-msgid "VFAT, NTFS"
+msgid "VFAT"
 msgstr ""
 
 #. Tag: entry
@@ -2860,14 +2765,23 @@ msgid ""
 msgstr ""
 
 #. Tag: para
+#: Beginning_Installation_Network_x86_ppc-para-2.xml:5
+#, no-c-format
+msgid ""
+"Enter the IP address you are using during installation and press "
+"<keycap>Enter</keycap>."
+msgstr ""
+
+#. Tag: para
 #: Beginning_Installation_Network_x86_ppc-para-3.xml:5
 #, fuzzy, no-c-format
 msgid ""
 "The installation program is network-aware and can use network settings for a "
-"number of functions. For instance, you can install Fedora from a network "
-"server using FTP, HTTP, or NFS protocols. You can also instruct the "
-"installation program to consult additional software repositories later in "
-"the process."
+"number of functions. For instance, if you boot the installer with the "
+"<literal>askmethod</literal> or <literal>repo=</literal> options, you can "
+"install Fedora from a network server using FTP, HTTP, or NFS protocols. You "
+"can also instruct the installation program to consult additional software "
+"repositories later in the process."
 msgstr ""
 "Program instalacyjny jest w peÅ‚ni sieciowy i moÅ¼e uÅ¼ywaÄ‡ ustawieÅ„ sieciowych "
 "w wielu funkcjach. Na przykÅ‚ad moÅ¼na zainstalowaÄ‡ FedorÄ™ z serwera "
@@ -2980,9 +2894,11 @@ msgstr ""
 #: Beginning_Installation_NFS_common-para-1.xml:8
 #, no-c-format
 msgid ""
-"The NFS dialog applies only if you are installing from an NFS server (if you "
-"selected <guimenuitem>NFS Image</guimenuitem> in the <guilabel>Installation "
-"Method</guilabel> dialog)."
+"The NFS dialog applies only if you booted with the <literal>askmethod</"
+"literal> boot option and selected <guimenuitem>NFS Image</guimenuitem> in "
+"the <guilabel>Installation Method</guilabel> dialog. If you used the "
+"<literal>repo=nfs</literal>boot option, you already specified a server and "
+"path."
 msgstr ""
 
 #. Tag: para
@@ -3000,11 +2916,9 @@ msgstr ""
 #, no-c-format
 msgid ""
 "If the NFS server is exporting a mirror of the Fedora installation tree, "
-"enter the directory which contains the root of the installation tree. You "
-"will enter an Installation Key later on in the process which will determine "
-"which subdirectories are used to install from. If everything was specified "
-"properly, a message appears indicating that the installation program for "
-"Fedora is running."
+"enter the directory which contains the root of the installation tree. If "
+"everything was specified properly, a message appears indicating that the "
+"installation program for Fedora is running."
 msgstr ""
 
 #. Tag: para
@@ -3037,14 +2951,54 @@ msgstr ""
 msgid "Beginning the Installation"
 msgstr "Rozpoczynanie instalacji"
 
-#. Tag: title
+#. Tag: primary
 #: beginninginstallation.xml:10
 #, no-c-format
+msgid "BIOS (Basic Input/Output System)"
+msgstr "BIOS (Podstawowy system wejÅ›cia/wyjÅ›cia)"
+
+#. Tag: para
+#: beginninginstallation.xml:20
+#, no-c-format
+msgid ""
+"To start the installation program from minimal boot media, a Live image, or "
+"the distribution DVD, follow this procedure:"
+msgstr ""
+"Aby uruchomiÄ‡ program instalacyjny z minimalnego noÅ›nika startowego, obrazu "
+"Live lub dystrybucji DVD postÄ™puj zgodnie z tÄ… procedurÄ…:"
+
+#. Tag: para
+#: beginninginstallation.xml:24
+#, no-c-format
+msgid "Power off your computer system."
+msgstr "WyÅ‚Ä…cz komputer."
+
+#. Tag: para
+#: beginninginstallation.xml:27
+#, no-c-format
+msgid ""
+"Disconnect any external FireWire or USB disks that you do not need for "
+"installation. Refer to <xref linkend=\"sn-partitioning-fw-usb\"/> for more "
+"information."
+msgstr ""
+"RozÅ‚Ä…cz wszystkie zewnÄ™trzne dyski FireWire lub USB, ktÃ³re nie sÄ… niezbÄ™dne "
+"do instalacji. Zobacz <xref linkend=\"sn-partitioning-fw-usb\"/>, aby "
+"dowiedzieÄ‡ siÄ™ wiÄ™cej."
+
+#. Tag: para
+#: beginninginstallation.xml:33
+#, no-c-format
+msgid "Insert the media in your computer and turn it on."
+msgstr "UmieÅ›Ä‡ noÅ›nik w komputerze i wÅ‚Ä…cz go."
+
+#. Tag: title
+#: beginninginstallation.xml:42
+#, no-c-format
 msgid "Aborting the Installation"
 msgstr "Przerywanie instalacji"
 
 #. Tag: para
-#: beginninginstallation.xml:11
+#: beginninginstallation.xml:43
 #, no-c-format
 msgid ""
 "To abort the installation, either press <keycombo><keycap>Ctrl </"
@@ -3066,13 +3020,13 @@ msgstr ""
 "moÅ¼e spowodowaÄ‡, Å¼e komputer bÄ™dzie nieuÅ¼ywalny."
 
 #. Tag: title
-#: beginninginstallation.xml:24
+#: beginninginstallation.xml:56
 #, no-c-format
 msgid "The Boot Menu"
 msgstr "Menu startowe"
 
 #. Tag: para
-#: beginninginstallation.xml:25
+#: beginninginstallation.xml:57
 #, no-c-format
 msgid ""
 "The boot media displays a graphical boot menu with several options. If no "
@@ -3092,13 +3046,13 @@ msgstr ""
 "startowe, naciÅ›nij klawisz <keycap>Tab</keycap>."
 
 #. Tag: title
-#: beginninginstallation.xml:34
+#: beginninginstallation.xml:66
 #, no-c-format
 msgid "Using Boot Options"
 msgstr "UÅ¼ywanie opcji startowych"
 
 #. Tag: para
-#: beginninginstallation.xml:35
+#: beginninginstallation.xml:67
 #, no-c-format
 msgid ""
 "For a listing and explanation of common boot options, refer to <xref linkend="
@@ -3108,7 +3062,7 @@ msgstr ""
 "<xref linkend=\"ap-admin-options\"/>."
 
 #. Tag: para
-#: beginninginstallation.xml:38
+#: beginninginstallation.xml:70
 #, no-c-format
 msgid ""
 "When using Fedora Live media, press any key during the initial boot "
@@ -3120,13 +3074,13 @@ msgstr ""
 "guilabel>. Menu startowe zawiera:"
 
 #. Tag: title
-#: beginninginstallation.xml:44
+#: beginninginstallation.xml:76
 #, no-c-format
 msgid "Boot"
 msgstr "Uruchom"
 
 #. Tag: para
-#: beginninginstallation.xml:45
+#: beginninginstallation.xml:77
 #, no-c-format
 msgid ""
 "This option is the default. If you select this option, only the kernel and "
@@ -3141,13 +3095,13 @@ msgstr ""
 "iloÅ›ciÄ… pamiÄ™ci."
 
 #. Tag: title
-#: beginninginstallation.xml:54
+#: beginninginstallation.xml:86
 #, no-c-format
 msgid "Verify and Boot"
 msgstr "SprawdÅº i uruchom"
 
 #. Tag: para
-#: beginninginstallation.xml:55
+#: beginninginstallation.xml:87
 #, no-c-format
 msgid ""
 "This option lets you verify the disc before you run the Live CD environment. "
@@ -3159,13 +3113,13 @@ msgstr ""
 "o procesie sprawdzania."
 
 #. Tag: title
-#: beginninginstallation.xml:63 beginninginstallation.xml:122
+#: beginninginstallation.xml:95 beginninginstallation.xml:154
 #, no-c-format
 msgid "Memory Test"
 msgstr "Test pamiÄ™ci"
 
 #. Tag: para
-#: beginninginstallation.xml:64
+#: beginninginstallation.xml:96
 #, no-c-format
 msgid ""
 "This option runs an exhaustive test on the memory on your system. For more "
@@ -3175,13 +3129,13 @@ msgstr ""
 "wiÄ™cej, zobacz <xref linkend=\"sn-memtest\"/>."
 
 #. Tag: title
-#: beginninginstallation.xml:73 beginninginstallation.xml:114
+#: beginninginstallation.xml:105 beginninginstallation.xml:146
 #, no-c-format
 msgid "Boot from local drive"
 msgstr "Uruchom z lokalnego dysku"
 
 #. Tag: para
-#: beginninginstallation.xml:74
+#: beginninginstallation.xml:106
 #, no-c-format
 msgid ""
 "This option boots the system from the first installed disk. If you booted "
@@ -3193,7 +3147,7 @@ msgstr ""
 "z dysku twardego bez wÅ‚Ä…czania instalatora."
 
 #. Tag: para
-#: beginninginstallation.xml:83
+#: beginninginstallation.xml:115
 #, no-c-format
 msgid ""
 "If you boot the DVD, rescue CD, or minimal boot media, the boot menu options "
@@ -3203,13 +3157,13 @@ msgstr ""
 "menu startowego to:"
 
 #. Tag: title
-#: beginninginstallation.xml:88
+#: beginninginstallation.xml:120
 #, no-c-format
 msgid "Install or upgrade an existing system"
 msgstr "Zainstaluj lub zaktualizuj istniejÄ…cy system"
 
 #. Tag: para
-#: beginninginstallation.xml:89
+#: beginninginstallation.xml:121
 #, no-c-format
 msgid ""
 "This option is the default. Choose this option to install Fedora onto your "
@@ -3219,13 +3173,13 @@ msgstr ""
 "komputerze uÅ¼ywajÄ…c graficznego programu instalacyjnego."
 
 #. Tag: title
-#: beginninginstallation.xml:96
+#: beginninginstallation.xml:128
 #, no-c-format
 msgid "Install system with basic video driver"
 msgstr ""
 
 #. Tag: para
-#: beginninginstallation.xml:97
+#: beginninginstallation.xml:129
 #, no-c-format
 msgid ""
 "This option allows you to install Fedora in graphical mode even if the "
@@ -3236,13 +3190,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: beginninginstallation.xml:102
+#: beginninginstallation.xml:134
 #, no-c-format
 msgid "Rescue installed system"
 msgstr "Uratuj zainstalowany system"
 
 #. Tag: para
-#: beginninginstallation.xml:103
+#: beginninginstallation.xml:135
 #, no-c-format
 msgid ""
 "Choose this option to repair a problem with your installed Fedora system "
@@ -3258,19 +3212,19 @@ msgstr ""
 "programy narzÄ™dziowe, ktÃ³re pozwalajÄ… naprawiÄ‡ wiele z tych problemÃ³w."
 
 #. Tag: para
-#: beginninginstallation.xml:115 beginninginstallation.xml:123
+#: beginninginstallation.xml:147 beginninginstallation.xml:155
 #, no-c-format
 msgid "(as for Live CD)"
 msgstr ""
 
 #. Tag: title
-#: beginninginstallation.xml:131
+#: beginninginstallation.xml:163
 #, no-c-format
 msgid "Installing from a Different Source"
 msgstr "Instalowanie z innego ÅºrÃ³dÅ‚a"
 
 #. Tag: para
-#: beginninginstallation.xml:132
+#: beginninginstallation.xml:164
 #, no-c-format
 msgid ""
 "All boot media except the distribution DVD present a menu that allows you to "
@@ -3287,7 +3241,7 @@ msgstr ""
 "askmethod</option> na koÅ„cu wiersza, ktÃ³ry pojawi siÄ™ pod menu."
 
 #. Tag: para
-#: beginninginstallation.xml:138
+#: beginninginstallation.xml:170
 #, no-c-format
 msgid ""
 "You can install Fedora from the ISO images stored on hard disk, or from a "
@@ -3301,7 +3255,7 @@ msgstr ""
 "dysku twardego lub serwera sieciowego niÅ¼ z CD czy DVD."
 
 #. Tag: para
-#: beginninginstallation.xml:143
+#: beginninginstallation.xml:175
 #, no-c-format
 msgid ""
 "The following table summarizes the different boot methods and recommended "
@@ -3311,55 +3265,55 @@ msgstr ""
 "instalacji do kaÅ¼dej z nich:"
 
 #. Tag: title
-#: beginninginstallation.xml:145
+#: beginninginstallation.xml:177
 #, fuzzy, no-c-format
 msgid "Boot methods and installation methods"
 msgstr "Metoda instalacji"
 
 #. Tag: entry
-#: beginninginstallation.xml:149
+#: beginninginstallation.xml:181
 #, fuzzy, no-c-format
 msgid "Boot method"
 msgstr "Metoda uruchamiania"
 
 #. Tag: entry
-#: beginninginstallation.xml:155
+#: beginninginstallation.xml:187
 #, no-c-format
 msgid "<entry>DVD</entry>"
 msgstr ""
 
 #. Tag: entry
-#: beginninginstallation.xml:156
+#: beginninginstallation.xml:188
 #, no-c-format
 msgid "DVD, network, or hard disk"
 msgstr "DVD, sieÄ‡ lub dysk twardy"
 
 #. Tag: entry
-#: beginninginstallation.xml:159
+#: beginninginstallation.xml:191
 #, no-c-format
 msgid "Minimal boot CD or USB, rescue CD"
 msgstr "Minimalna, startowa CD lub USB, ratunkowa CD"
 
 #. Tag: entry
-#: beginninginstallation.xml:160
+#: beginninginstallation.xml:192
 #, no-c-format
 msgid "Network or hard disk"
 msgstr "SieÄ‡ lub dysk twardy"
 
 #. Tag: entry
-#: beginninginstallation.xml:163
+#: beginninginstallation.xml:195
 #, no-c-format
 msgid "Live CD or USB"
 msgstr "Live CD lub USB"
 
 #. Tag: entry
-#: beginninginstallation.xml:164
+#: beginninginstallation.xml:196
 #, no-c-format
 msgid "<application>Install to Hard Disk</application> application"
 msgstr ""
 
 #. Tag: para
-#: beginninginstallation.xml:170
+#: beginninginstallation.xml:202
 #, fuzzy, no-c-format
 msgid ""
 "contains detailed information about installing from alternate locations."
@@ -3368,13 +3322,13 @@ msgstr ""
 "o instalowaniu z rÃ³Å¼nych poÅ‚oÅ¼eÅ„."
 
 #. Tag: title
-#: beginninginstallation.xml:176
+#: beginninginstallation.xml:208
 #, no-c-format
 msgid "Verifying Media"
 msgstr "Sprawdzanie noÅ›nikÃ³w"
 
 #. Tag: para
-#: beginninginstallation.xml:177
+#: beginninginstallation.xml:209
 #, no-c-format
 msgid ""
 "The distribution DVD media and the Live CD media offer an option to verify "
@@ -3392,13 +3346,13 @@ msgstr ""
 "instalacjÄ™, sprawdÅº noÅ›nik przed zainstalowaniem."
 
 #. Tag: title
-#: beginninginstallation.xml:192
+#: beginninginstallation.xml:224
 #, no-c-format
 msgid "Verifying the Live CD"
 msgstr "Sprawdzanie Live CD"
 
 #. Tag: para
-#: beginninginstallation.xml:193
+#: beginninginstallation.xml:225
 #, no-c-format
 msgid ""
 "If you boot from the Live CD, choose <guilabel>Verify and Boot</guilabel> "
@@ -3414,13 +3368,13 @@ msgstr ""
 "ISO, ktÃ³ry wczeÅ›niej pobraÅ‚eÅ›."
 
 #. Tag: title
-#: beginninginstallation.xml:201
+#: beginninginstallation.xml:233
 #, no-c-format
 msgid "Verifying the DVD"
 msgstr "Sprawdzanie DVD"
 
 #. Tag: para
-#: beginninginstallation.xml:202
+#: beginninginstallation.xml:234
 #, no-c-format
 msgid ""
 "If you boot from the Fedora distribution DVD, the option to verify the media "
@@ -3434,13 +3388,13 @@ msgstr ""
 "utwÃ³rz nowe DVD uÅ¼ywajÄ…c obrazu ISO, ktÃ³ry wczeÅ›niej pobraÅ‚eÅ›."
 
 #. Tag: title
-#: beginninginstallation.xml:211
+#: beginninginstallation.xml:243
 #, no-c-format
 msgid "Booting from the Network using PXE"
 msgstr "Uruchamianie z sieci uÅ¼ywajÄ…c PXE"
 
 #. Tag: para
-#: beginninginstallation.xml:213
+#: beginninginstallation.xml:245
 #, fuzzy, no-c-format
 msgid ""
 "To boot with <indexterm> <primary>PXE (Pre-boot eXecution Environment)</"
@@ -3455,7 +3409,7 @@ msgstr ""
 "install-server\"/>."
 
 #. Tag: para
-#: beginninginstallation.xml:222
+#: beginninginstallation.xml:254
 #, no-c-format
 msgid ""
 "Configure the computer to boot from the network interface. This option is in "
@@ -3470,13 +3424,13 @@ msgstr ""
 "pomocy innych noÅ›nikÃ³w."
 
 #. Tag: para
-#: beginninginstallation.xml:230
+#: beginninginstallation.xml:262
 #, no-c-format
 msgid "To boot a computer from a PXE server:"
 msgstr "Aby uruchomiÄ‡ komputer z serwera PXE:"
 
 #. Tag: para
-#: beginninginstallation.xml:236
+#: beginninginstallation.xml:268
 #, no-c-format
 msgid ""
 "Ensure that the network cable is attached. The link indicator light on the "
@@ -3486,13 +3440,13 @@ msgstr ""
 "gnieÅºdzie sieciowym powinna siÄ™ Å›wieciÄ‡, nawet jeÅ›li komputer jest wyÅ‚Ä…czony."
 
 #. Tag: para
-#: beginninginstallation.xml:243
+#: beginninginstallation.xml:275
 #, no-c-format
 msgid "Switch on the computer."
 msgstr "WÅ‚Ä…cz go."
 
 #. Tag: para
-#: beginninginstallation.xml:248
+#: beginninginstallation.xml:280
 #, no-c-format
 msgid ""
 "A menu screen appears. Press the number key that corresponds to the desired "
@@ -3502,13 +3456,13 @@ msgstr ""
 "opcji."
 
 #. Tag: title
-#: beginninginstallation.xml:256
+#: beginninginstallation.xml:288
 #, no-c-format
 msgid "PXE Troubleshooting"
 msgstr "RozwiÄ…zywanie problemÃ³w z PXE"
 
 #. Tag: para
-#: beginninginstallation.xml:257
+#: beginninginstallation.xml:289
 #, no-c-format
 msgid ""
 "If your PC does not boot from the netboot server, ensure that the BIOS is "
@@ -3524,13 +3478,13 @@ msgstr ""
 "dowiedzieÄ‡ siÄ™ wiÄ™cej, zobacz dokumentacjÄ™ sprzÄ™tu."
 
 #. Tag: title
-#: beginninginstallation.xml:266
+#: beginninginstallation.xml:298
 #, no-c-format
 msgid "Multiple NICs and PXE installation"
 msgstr "Wiele instalacji NIC i PXE"
 
 #. Tag: para
-#: beginninginstallation.xml:267
+#: beginninginstallation.xml:299
 #, no-c-format
 msgid ""
 "Some servers with multiple network interfaces may not assign eth0 to the "
@@ -3546,19 +3500,19 @@ msgstr ""
 "konfiguracji <filename>pxelinux.cfg/*</filename>:"
 
 #. Tag: option
-#: beginninginstallation.xml:274
+#: beginninginstallation.xml:306
 #, no-c-format
 msgid "IPAPPEND 2"
 msgstr "IPAPPEND 2"
 
 #. Tag: option
-#: beginninginstallation.xml:276
+#: beginninginstallation.xml:308
 #, no-c-format
 msgid "APPEND ksdevice=bootif"
 msgstr "APPEND ksdevice=bootif"
 
 #. Tag: para
-#: beginninginstallation.xml:278
+#: beginninginstallation.xml:310
 #, no-c-format
 msgid ""
 "The configuration options above causes the installer to use the same network "
@@ -3569,13 +3523,13 @@ msgstr ""
 "nastÄ™pujÄ…cej opcji:"
 
 #. Tag: option
-#: beginninginstallation.xml:281
+#: beginninginstallation.xml:313
 #, no-c-format
 msgid "ksdevice=link"
 msgstr "ksdevice=odnoÅ›nik"
 
 #. Tag: para
-#: beginninginstallation.xml:283
+#: beginninginstallation.xml:315
 #, no-c-format
 msgid ""
 "This option causes the installer to use the first network device it finds "
@@ -3585,13 +3539,13 @@ msgstr ""
 "ktÃ³re znajdzie i ktÃ³re jest dowiÄ…zane do przeÅ‚Ä…cznika sieciowego."
 
 #. Tag: title
-#: beginninginstallation.xml:289
+#: beginninginstallation.xml:321
 #, no-c-format
 msgid "Graphical and Text Interfaces"
 msgstr "Graficzny i tekstowy interfejs"
 
 #. Tag: para
-#: beginninginstallation.xml:290
+#: beginninginstallation.xml:322
 #, fuzzy, no-c-format
 msgid ""
 "Fedora &PRODVER; supports graphical and text-based installations. However, "
@@ -3614,7 +3568,7 @@ msgstr ""
 "<option>linux text</option> po znaku zachÄ™ty <prompt>boot:</prompt>."
 
 #. Tag: para
-#: beginninginstallation.xml:298
+#: beginninginstallation.xml:330
 #, no-c-format
 msgid ""
 "If one of the following situations occurs, the installation program uses a "
@@ -3624,7 +3578,7 @@ msgstr ""
 "trybu tekstowego:"
 
 #. Tag: para
-#: beginninginstallation.xml:302
+#: beginninginstallation.xml:334
 #, no-c-format
 msgid ""
 "The installation system fails to identify the display hardware on your "
@@ -3634,19 +3588,19 @@ msgstr ""
 "komputerze."
 
 #. Tag: para
-#: beginninginstallation.xml:306
+#: beginninginstallation.xml:338
 #, no-c-format
 msgid "Your computer has less than 192 MB of RAM"
 msgstr "Komputer ma 192 MB RAM-u lub mniej"
 
 #. Tag: para
-#: beginninginstallation.xml:309
+#: beginninginstallation.xml:341
 #, no-c-format
 msgid "You choose the text mode installation from the boot menu"
 msgstr "Wybrano tryb instalacji tekstowej z menu startowego"
 
 #. Tag: para
-#: beginninginstallation.xml:313
+#: beginninginstallation.xml:345
 #, no-c-format
 msgid ""
 "The text screens provide most of the same functions as the standard screens, "
@@ -3657,13 +3611,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: beginninginstallation.xml:317
+#: beginninginstallation.xml:349
 #, no-c-format
 msgid "Graphical Interface Usage"
 msgstr "UÅ¼ycie interfejsu graficznego"
 
 #. Tag: para
-#: beginninginstallation.xml:318
+#: beginninginstallation.xml:350
 #, no-c-format
 msgid ""
 "Installing in text mode does <emphasis role=\"strong\">not</emphasis> "
@@ -3679,13 +3633,13 @@ msgstr ""
 "linkend=\"sn-additional-help\"/>."
 
 #. Tag: title
-#: beginninginstallation.xml:326
+#: beginninginstallation.xml:358
 #, no-c-format
 msgid "Installation requires at least 64 MB of RAM"
 msgstr ""
 
 #. Tag: para
-#: beginninginstallation.xml:327
+#: beginninginstallation.xml:359
 #, no-c-format
 msgid ""
 "If your system has less than 64 MB of RAM, installation will not continue."
@@ -3718,13 +3672,16 @@ msgstr ""
 #: Beginning_Installation_URL-common-para-2-Fedora.xml:6
 #, no-c-format
 msgid ""
-"Enter the name or IP address of the FTP or HTTP site you are installing "
-"from, and the name of the directory containing your architecture. For "
-"example, if the FTP or HTTP site contains the directory <filename>/mirrors/"
-"Fedora/<replaceable>arch</replaceable>/</filename>, enter <filename>/mirrors/"
-"Fedora/<replaceable>arch</replaceable>/</filename> (where <replaceable>arch</"
-"replaceable> is replaced with the architecture type of your system, such as "
-"i386). If everything was specified properly, a message box appears "
+"Enter the URL for the directory that contains the installation image file "
+"(<filename>install.img</filename>) on your chosen FTP or HTTP site and press "
+"<keycap>Enter</keycap>. By default, this directory will be named <filename>/"
+"pub/fedora/linux/releases/&PRODVER;/Fedora/<replaceable>arch</replaceable>/"
+"os/images/</filename>, where <replaceable>arch</replaceable> is replaced "
+"with the architecture type of your system, such as i386. The complete URL "
+"will therefore resemble this example:<filename>http://download.fedoraproject."
+"org/pub/fedora/linux/releases/&PRODVER;/Fedora/i386/os/images</filename>. If "
+"the system can reach the URL that you provided, and can find a file named "
+"<filename>install.img</filename> at that location, a message box appears "
 "indicating that files are being retrieved from the server."
 msgstr ""
 
@@ -3762,7 +3719,7 @@ msgid ""
 "To abort the installation process at this time, reboot your machine and then "
 "eject the boot media. You can safely cancel the installation at any point "
 "before the <guilabel>About to Install</guilabel> screen. Refer to <xref "
-"linkend=\"s1-preparetoinstall-x86\"/> for more information."
+"linkend=\"s1-installpkgs-x86\"/> for more information."
 msgstr ""
 
 #. Tag: secondary
@@ -3784,22 +3741,16 @@ msgid ""
 "linkend=\"sn-welcome-x86\"/>)."
 msgstr ""
 
-#. Tag: primary
-#: Beginning_Installation_x86_ppc-indexterm-10.xml:9
-#, no-c-format
-msgid "ATAPI CD-ROM"
-msgstr ""
-
 #. Tag: secondary
-#: Beginning_Installation_x86_ppc-indexterm-11.xml:10
+#: Beginning_Installation_x86_ppc-indexterm-3.xml:10
 #, no-c-format
-msgid "problems"
+msgid "<secondary>IDE</secondary>"
 msgstr ""
 
-#. Tag: tertiary
-#: Beginning_Installation_x86_ppc-indexterm-11.xml:11
+#. Tag: secondary
+#: Beginning_Installation_x86_ppc-indexterm-4.xml:10
 #, no-c-format
-msgid "IDE CD-ROM related"
+msgid "ATAPI"
 msgstr ""
 
 #. Tag: secondary
@@ -3808,52 +3759,6 @@ msgstr ""
 msgid "installation from"
 msgstr ""
 
-#. Tag: primary
-#: Beginning_Installation_x86_ppc-indexterm-9.xml:9
-#, no-c-format
-msgid "IDE CD-ROM"
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-itemizedlist-1.xml:10
-#, no-c-format
-msgid "<command>a</command> — first IDE controller, master"
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-itemizedlist-1.xml:16
-#, no-c-format
-msgid "<command>b</command> — first IDE controller, slave"
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-itemizedlist-1.xml:22
-#, no-c-format
-msgid "<command>c</command> — second IDE controller, master"
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-itemizedlist-1.xml:28
-#, no-c-format
-msgid "<command>d</command> — second IDE controller, slave"
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-note-1.xml:12
-#, no-c-format
-msgid ""
-"The first CD-ROM is required when booting the installation program, and "
-"again after subsequent CD-ROMs have been processed."
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-para-1a.xml:5
-#, no-c-format
-msgid ""
-"Even if you booted from alternative media, you can still install Fedora from "
-"CD or DVD media."
-msgstr ""
-
 #. Tag: para
 #: Beginning_Installation_x86_ppc-para-1.xml:5
 #, no-c-format
@@ -3874,28 +3779,6 @@ msgid ""
 "automatically."
 msgstr ""
 
-#. Tag: para
-#: Beginning_Installation_x86_ppc-para-4.xml:8
-#, no-c-format
-msgid ""
-"If you have an IDE (ATAPI) DVD/CD-ROM but the installation program fails to "
-"find it and asks you what type of DVD/CD-ROM drive you have, try the "
-"following boot command. Restart the installation, and at the <prompt>boot:</"
-"prompt> prompt enter <userinput>linux hd<replaceable>X</replaceable>=cdrom</"
-"userinput>. Replace <userinput><replaceable>X</replaceable></userinput> with "
-"one of the following letters, depending on the interface the unit is "
-"connected to, and whether it is configured as master or slave (also known as "
-"primary and secondary):"
-msgstr ""
-
-#. Tag: para
-#: Beginning_Installation_x86_ppc-para-5.xml:8
-#, no-c-format
-msgid ""
-"If you have a third and/or fourth controller, continue assigning letters in "
-"alphabetical order, going from controller to controller, and master to slave."
-msgstr ""
-
 #. Tag: title
 #: Beginning_Installation_x86_ppc-title-1.xml:8
 #, no-c-format
@@ -3903,12 +3786,6 @@ msgid "Installing from DVD/CD-ROM"
 msgstr ""
 
 #. Tag: title
-#: Beginning_Installation_x86_ppc-title-2.xml:9
-#, no-c-format
-msgid "What If the IDE CD-ROM Was Not Found?"
-msgstr ""
-
-#. Tag: title
 #: Book_Info.xml:5
 #, no-c-format
 msgid "Installation Guide"
@@ -3917,9 +3794,7 @@ msgstr "Przewodnik po instalacji"
 #. Tag: subtitle
 #: Book_Info.xml:6
 #, no-c-format
-msgid ""
-"Installing Fedora 11 on x86, AMD64, and <trademark class=\"registered"
-"\">Intel</trademark> 64 architectures"
+msgid "Installing Fedora 12 on x86, AMD64, and Intel 64 architectures"
 msgstr ""
 
 #. Tag: para
@@ -4245,7 +4120,7 @@ msgstr ""
 #: Boot_Init_Shutdown.xml:187
 #, no-c-format
 msgid ""
-"The <application>GRUB</application> bootloader does not support the ext4 "
+"The <application>GRUB</application> bootloader does not support the Btrfs "
 "file system."
 msgstr ""
 
@@ -4389,8 +4264,8 @@ msgstr ""
 
 #. Tag: primary
 #: Boot_Init_Shutdown.xml:286 Boot_Init_Shutdown.xml:291
-#: Boot_Init_Shutdown.xml:418 Boot_Init_Shutdown.xml:423
-#: Boot_Init_Shutdown.xml:428 Boot_Init_Shutdown.xml:452
+#: Boot_Init_Shutdown.xml:431 Boot_Init_Shutdown.xml:436
+#: Boot_Init_Shutdown.xml:441 Boot_Init_Shutdown.xml:465
 #, no-c-format
 msgid "<primary><command>init</command> command</primary>"
 msgstr ""
@@ -4430,14 +4305,14 @@ msgstr ""
 #: Boot_Init_Shutdown.xml:308
 #, no-c-format
 msgid ""
-"The <command>init</command> command then runs the <filename>/etc/inittab</"
-"filename> script, which describes how the system should be set up in each "
-"<firstterm>SysV init runlevel</firstterm>. Runlevels are a state, or "
-"<firstterm>mode</firstterm>, defined by the services listed in the SysV "
-"<filename>/etc/rc.d/rc<replaceable><x></replaceable>.d/</filename> "
-"directory, where <replaceable><x></replaceable> is the number of the "
-"runlevel. For more information on SysV init runlevels, refer to <xref "
-"linkend=\"s1-boot-init-shutdown-sysv\"/>."
+"The <command>init</command> command then processes the jobs in the "
+"<filename>/etc/event.d</filename> directory, which describe how the system "
+"should be set up in each <firstterm>SysV init runlevel</firstterm>. "
+"Runlevels are a state, or <firstterm>mode</firstterm>, defined by the "
+"services listed in the SysV <filename>/etc/rc.d/rc<replaceable><x></"
+"replaceable>.d/</filename> directory, where <replaceable><x></"
+"replaceable> is the number of the runlevel. For more information on SysV "
+"init runlevels, refer to <xref linkend=\"s1-boot-init-shutdown-sysv\"/>."
 msgstr ""
 
 #. Tag: para
@@ -4645,10 +4520,11 @@ msgstr ""
 #, no-c-format
 msgid ""
 "After the <command>init</command> command has progressed through the "
-"appropriate <filename>rc</filename> directory for the runlevel, the "
-"<filename>/etc/inittab</filename> script forks an <command>/sbin/mingetty</"
+"appropriate <filename>rc</filename> directory for the runlevel, "
+"<application>Upstart</application> forks an <command>/sbin/mingetty</"
 "command> process for each virtual console (login prompt) allocated to the "
-"runlevel. Runlevels 2 through 5 have all six virtual consoles, while "
+"runlevel by the job definition in the <filename>/etc/event.d</filename> "
+"directory. Runlevels 2 through 5 have all six virtual consoles, while "
 "runlevel 1 (single user mode) has one, and runlevels 0 and 6 have none. The "
 "<command>/sbin/mingetty</command> process opens communication pathways to "
 "<firstterm>tty</firstterm> devices<footnote> <para> Refer to the Red Hat "
@@ -4662,7 +4538,7 @@ msgstr ""
 #: Boot_Init_Shutdown.xml:366
 #, no-c-format
 msgid ""
-"In runlevel 5, the <filename>/etc/inittab</filename> runs a script called "
+"In runlevel 5, <application>Upstart</application> runs a script called "
 "<filename>/etc/X11/prefdm</filename>. The <filename>prefdm</filename> script "
 "executes the preferred X display manager<footnote> <para> Refer to the Red "
 "Hat Enterprise Linux Deployment Guide for more information about display "
@@ -4679,73 +4555,142 @@ msgid ""
 msgstr ""
 
 #. Tag: title
+#: Boot_Init_Shutdown.xml:379
+#, no-c-format
+msgid "Job definitions"
+msgstr ""
+
+#. Tag: para
 #: Boot_Init_Shutdown.xml:380
 #, no-c-format
+msgid ""
+"Previously, the <package>sysvinit</package> package provided the "
+"<application>init</application> daemon for the default configuration. When "
+"the system started, this <application>init</application> daemon ran the "
+"<filename>/etc/inittab</filename> script to start system processes defined "
+"for each runlevel. The default configuration now uses an event-driven "
+"<application>init</application> daemon provided by the <package>Upstart</"
+"package> package. Whenever particular <firstterm>events</firstterm> occur, "
+"the <application>init</application> daemon processes <firstterm>jobs</"
+"firstterm> stored in the <filename>/etc/event.d</filename> directory. The "
+"<application>init</application> daemon recognises the start of the system as "
+"such an event."
+msgstr ""
+
+#. Tag: para
+#: Boot_Init_Shutdown.xml:383
+#, no-c-format
+msgid ""
+"Each job typically specifies a program, and the events that trigger "
+"<application>init</application> to run or to stop the program. Some jobs are "
+"constructed as <firstterm>tasks</firstterm>, which perform actions and then "
+"terminate until another event triggers the job again. Other jobs are "
+"constructed as <firstterm>services</firstterm>, which <application>init</"
+"application> keeps running until another event (or the user) stops it."
+msgstr ""
+
+#. Tag: para
+#: Boot_Init_Shutdown.xml:386
+#, no-c-format
+msgid ""
+"For example, the <filename>/etc/events.d/tty2</filename> job is a service to "
+"maintain a virtual terminal on <application>tty2</application> from the time "
+"that the system starts until the system shuts down, or another event (such "
+"as a change in runlevel) stops the job. The job is constructed so that "
+"<application>init</application> will restart the virtual terminal if it "
+"stops unexpecedly during that time:"
+msgstr ""
+
+#. Tag: screen
+#: Boot_Init_Shutdown.xml:389
+#, no-c-format
+msgid ""
+"# tty2 - getty\n"
+"#\n"
+"# This service maintains a getty on tty2 from the point the system is\n"
+"# started until it is shut down again.\n"
+"\n"
+"start on stopped rc2\n"
+"start on stopped rc3\n"
+"start on stopped rc4\n"
+"start on started prefdm\n"
+"\n"
+"stop on runlevel 0\n"
+"stop on runlevel 1\n"
+"stop on runlevel 6\n"
+"\n"
+"respawn\n"
+"exec /sbin/mingetty tty2"
+msgstr ""
+
+#. Tag: title
+#: Boot_Init_Shutdown.xml:393
+#, no-c-format
 msgid "Running Additional Programs at Boot Time"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:382
+#: Boot_Init_Shutdown.xml:395
 #, no-c-format
 msgid "programs"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:383
+#: Boot_Init_Shutdown.xml:396
 #, no-c-format
 msgid "running at boot time"
 msgstr ""
 
 #. Tag: filename
-#: Boot_Init_Shutdown.xml:386
+#: Boot_Init_Shutdown.xml:399
 #, no-c-format
 msgid "rc.local"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:388
+#: Boot_Init_Shutdown.xml:401
 #, no-c-format
 msgid "modifying"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:391
+#: Boot_Init_Shutdown.xml:404
 #, no-c-format
 msgid "<primary><command>setserial</command> command</primary>"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:392
+#: Boot_Init_Shutdown.xml:405
 #, no-c-format
 msgid "configuring"
 msgstr ""
 
 #. Tag: filename
-#: Boot_Init_Shutdown.xml:395
+#: Boot_Init_Shutdown.xml:408
 #, no-c-format
 msgid "rc.serial"
 msgstr ""
 
 #. Tag: seealso
-#: Boot_Init_Shutdown.xml:397
+#: Boot_Init_Shutdown.xml:410
 #, no-c-format
 msgid "<seealso><command>setserial</command> command</seealso>"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:400
+#: Boot_Init_Shutdown.xml:413
 #, no-c-format
 msgid "serial ports"
 msgstr ""
 
 #. Tag: see
-#: Boot_Init_Shutdown.xml:401
+#: Boot_Init_Shutdown.xml:414
 #, no-c-format
 msgid "<see><command>setserial</command> command</see>"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:403
+#: Boot_Init_Shutdown.xml:416
 #, no-c-format
 msgid ""
 "The <filename>/etc/rc.d/rc.local</filename> script is executed by the "
@@ -4757,7 +4702,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:407
+#: Boot_Init_Shutdown.xml:420
 #, no-c-format
 msgid ""
 "The <filename>/etc/rc.serial</filename> script is used if serial ports must "
@@ -4767,61 +4712,61 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Boot_Init_Shutdown.xml:412
+#: Boot_Init_Shutdown.xml:425
 #, no-c-format
 msgid "SysV Init Runlevels"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:414
+#: Boot_Init_Shutdown.xml:427
 #, no-c-format
 msgid "<primary>SysV init</primary>"
 msgstr ""
 
 #. Tag: see
-#: Boot_Init_Shutdown.xml:415 Boot_Init_Shutdown.xml:449
+#: Boot_Init_Shutdown.xml:428 Boot_Init_Shutdown.xml:462
 #, no-c-format
 msgid "<see><command>init</command> command</see>"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:419
+#: Boot_Init_Shutdown.xml:432
 #, no-c-format
 msgid "<secondary>runlevels</secondary>"
 msgstr ""
 
 #. Tag: tertiary
-#: Boot_Init_Shutdown.xml:420
+#: Boot_Init_Shutdown.xml:433
 #, no-c-format
 msgid "directories for"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:424
+#: Boot_Init_Shutdown.xml:437
 #, no-c-format
 msgid "<secondary>SysV init</secondary>"
 msgstr ""
 
 #. Tag: tertiary
-#: Boot_Init_Shutdown.xml:425
+#: Boot_Init_Shutdown.xml:438
 #, no-c-format
 msgid "<tertiary>definition of</tertiary>"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:429
+#: Boot_Init_Shutdown.xml:442
 #, no-c-format
 msgid "configuration files"
 msgstr ""
 
 #. Tag: filename
-#: Boot_Init_Shutdown.xml:430
+#: Boot_Init_Shutdown.xml:443
 #, no-c-format
 msgid "/etc/inittab"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:433
+#: Boot_Init_Shutdown.xml:446
 #, no-c-format
 msgid ""
 "The SysV init runlevel system provides a standard process for controlling "
@@ -4831,7 +4776,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:437
+#: Boot_Init_Shutdown.xml:450
 #, no-c-format
 msgid ""
 "The configuration files for SysV init are located in the <filename>/etc/rc.d/"
@@ -4842,7 +4787,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Boot_Init_Shutdown.xml:440
+#: Boot_Init_Shutdown.xml:453
 #, no-c-format
 msgid ""
 "<computeroutput>init.d/ rc0.d/ rc1.d/ rc2.d/ rc3.d/ rc4.d/ rc5.d/ rc6.d/</"
@@ -4850,7 +4795,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:441
+#: Boot_Init_Shutdown.xml:454
 #, no-c-format
 msgid ""
 "The <filename>init.d/</filename> directory contains the scripts used by the "
@@ -4860,25 +4805,25 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Boot_Init_Shutdown.xml:446
+#: Boot_Init_Shutdown.xml:459
 #, no-c-format
 msgid "Runlevels"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:448 Boot_Init_Shutdown.xml:543
+#: Boot_Init_Shutdown.xml:461 Boot_Init_Shutdown.xml:556
 #, no-c-format
 msgid "<primary>runlevels</primary>"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:453
+#: Boot_Init_Shutdown.xml:466
 #, no-c-format
 msgid "runlevels accessed by"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:455
+#: Boot_Init_Shutdown.xml:468
 #, no-c-format
 msgid ""
 "The idea behind SysV init runlevels revolves around the idea that different "
@@ -4890,7 +4835,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:459
+#: Boot_Init_Shutdown.xml:472
 #, no-c-format
 msgid ""
 "The characteristics of a given runlevel determine which services are halted "
@@ -4902,43 +4847,43 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:463
+#: Boot_Init_Shutdown.xml:476
 #, no-c-format
 msgid "The following runlevels are defined by default under Fedora:"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:468
+#: Boot_Init_Shutdown.xml:481
 #, no-c-format
 msgid "<command>0</command> — Halt"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:474
+#: Boot_Init_Shutdown.xml:487
 #, no-c-format
 msgid "<command>1</command> — Single-user text mode"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:480
+#: Boot_Init_Shutdown.xml:493
 #, no-c-format
 msgid "<command>2</command> — Not used (user-definable)"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:486
+#: Boot_Init_Shutdown.xml:499
 #, no-c-format
 msgid "<command>3</command> — Full multi-user text mode"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:492
+#: Boot_Init_Shutdown.xml:505
 #, no-c-format
 msgid "<command>4</command> — Not used (user-definable)"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:498
+#: Boot_Init_Shutdown.xml:511
 #, no-c-format
 msgid ""
 "<command>5</command> — Full multi-user graphical mode (with an X-based "
@@ -4946,13 +4891,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:504
+#: Boot_Init_Shutdown.xml:517
 #, no-c-format
 msgid "<command>6</command> — Reboot"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:510
+#: Boot_Init_Shutdown.xml:523
 #, no-c-format
 msgid ""
 "In general, users operate Fedora at runlevel 3 or runlevel 5 — both "
@@ -4961,22 +4906,23 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:514
+#: Boot_Init_Shutdown.xml:527
 #, no-c-format
 msgid ""
 "The default runlevel for the system is listed in <filename>/etc/inittab</"
 "filename>. To find out the default runlevel for a system, look for the line "
-"similar to the following near the top of <filename>/etc/inittab</filename>:"
+"similar to the following near the bottom of <filename>/etc/inittab</"
+"filename>:"
 msgstr ""
 
 #. Tag: screen
-#: Boot_Init_Shutdown.xml:518
+#: Boot_Init_Shutdown.xml:531
 #, no-c-format
 msgid "<computeroutput>id:5:initdefault:</computeroutput>"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:519
+#: Boot_Init_Shutdown.xml:532
 #, no-c-format
 msgid ""
 "The default runlevel listed in this example is five, as the number after the "
@@ -4985,7 +4931,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:526
+#: Boot_Init_Shutdown.xml:539
 #, no-c-format
 msgid ""
 "Be very careful when editing <filename>/etc/inittab</filename>. Simple typos "
@@ -4995,7 +4941,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:530
+#: Boot_Init_Shutdown.xml:543
 #, no-c-format
 msgid ""
 "For more information on single-user and rescue mode, refer to the chapter "
@@ -5004,7 +4950,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:535
+#: Boot_Init_Shutdown.xml:548
 #, no-c-format
 msgid ""
 "It is possible to change the default runlevel at boot time by modifying the "
@@ -5014,69 +4960,69 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Boot_Init_Shutdown.xml:541
+#: Boot_Init_Shutdown.xml:554
 #, no-c-format
 msgid "Runlevel Utilities"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:544
+#: Boot_Init_Shutdown.xml:557
 #, no-c-format
 msgid "configuration of"
 msgstr ""
 
 #. Tag: seealso
-#: Boot_Init_Shutdown.xml:545 Boot_Init_Shutdown.xml:550
-#: Boot_Init_Shutdown.xml:560 Boot_Init_Shutdown.xml:575
+#: Boot_Init_Shutdown.xml:558 Boot_Init_Shutdown.xml:563
+#: Boot_Init_Shutdown.xml:573 Boot_Init_Shutdown.xml:588
 #, no-c-format
 msgid "<seealso>services</seealso>"
 msgstr ""
 
 #. Tag: application
-#: Boot_Init_Shutdown.xml:548
+#: Boot_Init_Shutdown.xml:561
 #, no-c-format
 msgid "Services Configuration Tool"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:553 Boot_Init_Shutdown.xml:563
-#: Boot_Init_Shutdown.xml:568
+#: Boot_Init_Shutdown.xml:566 Boot_Init_Shutdown.xml:576
+#: Boot_Init_Shutdown.xml:581
 #, no-c-format
 msgid "<primary>services</primary>"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:554
+#: Boot_Init_Shutdown.xml:567
 #, no-c-format
 msgid "configuring with <application>Services Configuration Tool</application>"
 msgstr ""
 
 #. Tag: application
-#: Boot_Init_Shutdown.xml:558
+#: Boot_Init_Shutdown.xml:571
 #, no-c-format
 msgid "ntsysv"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:564
+#: Boot_Init_Shutdown.xml:577
 #, no-c-format
 msgid "configuring with <application>ntsysv</application>"
 msgstr ""
 
 #. Tag: secondary
-#: Boot_Init_Shutdown.xml:569
+#: Boot_Init_Shutdown.xml:582
 #, no-c-format
 msgid "configuring with <command>chkconfig</command>"
 msgstr ""
 
 #. Tag: command
-#: Boot_Init_Shutdown.xml:573
+#: Boot_Init_Shutdown.xml:586
 #, no-c-format
 msgid "chkconfig"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:577
+#: Boot_Init_Shutdown.xml:590
 #, no-c-format
 msgid ""
 "One of the best ways to configure runlevels is to use an "
@@ -5088,13 +5034,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:581
+#: Boot_Init_Shutdown.xml:594
 #, no-c-format
 msgid "Fedora provides three such utilities:"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:587
+#: Boot_Init_Shutdown.xml:600
 #, no-c-format
 msgid ""
 "<command>/sbin/chkconfig</command> — The <command>/sbin/chkconfig</"
@@ -5103,7 +5049,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:593
+#: Boot_Init_Shutdown.xml:606
 #, no-c-format
 msgid ""
 "<application>/usr/sbin/ntsysv</application> — The ncurses-based "
@@ -5113,7 +5059,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:599
+#: Boot_Init_Shutdown.xml:612
 #, no-c-format
 msgid ""
 "<application>Services Configuration Tool</application> — The graphical "
@@ -5123,7 +5069,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:605
+#: Boot_Init_Shutdown.xml:618
 #, no-c-format
 msgid ""
 "Refer to the chapter titled <citetitle>Controlling Access to Services</"
@@ -5132,37 +5078,37 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Boot_Init_Shutdown.xml:611
+#: Boot_Init_Shutdown.xml:624
 #, no-c-format
 msgid "Shutting Down"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:613
+#: Boot_Init_Shutdown.xml:626
 #, no-c-format
 msgid "<primary>shutdown</primary>"
 msgstr ""
 
 #. Tag: seealso
-#: Boot_Init_Shutdown.xml:614
+#: Boot_Init_Shutdown.xml:627
 #, no-c-format
 msgid "<seealso>halt</seealso>"
 msgstr ""
 
 #. Tag: primary
-#: Boot_Init_Shutdown.xml:617
+#: Boot_Init_Shutdown.xml:630
 #, no-c-format
 msgid "<primary>halt</primary>"
 msgstr ""
 
 #. Tag: seealso
-#: Boot_Init_Shutdown.xml:618
+#: Boot_Init_Shutdown.xml:631
 #, no-c-format
 msgid "<seealso>shutdown</seealso>"
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:620
+#: Boot_Init_Shutdown.xml:633
 #, no-c-format
 msgid ""
 "To shut down Fedora, the root user may issue the <command>/sbin/shutdown</"
@@ -5171,7 +5117,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Boot_Init_Shutdown.xml:623
+#: Boot_Init_Shutdown.xml:636
 #, no-c-format
 msgid ""
 "<command>/sbin/shutdown -h now</command> <command>/sbin/shutdown -r now</"
@@ -5179,7 +5125,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:624
+#: Boot_Init_Shutdown.xml:637
 #, no-c-format
 msgid ""
 "After shutting everything down, the <command>-h</command> option halts the "
@@ -5187,7 +5133,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:628
+#: Boot_Init_Shutdown.xml:641
 #, no-c-format
 msgid ""
 "PAM console users can use the <command>reboot</command> and <command>halt</"
@@ -5197,7 +5143,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:632
+#: Boot_Init_Shutdown.xml:645
 #, no-c-format
 msgid ""
 "If the computer does not power itself down, be careful not to turn off the "
@@ -5205,7 +5151,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Boot_Init_Shutdown.xml:636
+#: Boot_Init_Shutdown.xml:649
 #, no-c-format
 msgid ""
 "Failure to wait for this message can mean that not all the hard drive "
@@ -5213,30 +5159,78 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Complete_common-para-1.xml:5
+#: Boot_Order-para-1.xml:5
+#, fuzzy, no-c-format
+msgid ""
+"You might need to press a specific key or combination of keys to boot from "
+"the media. On most computers, a message appears briefly on the screen very "
+"soon after you turn on the computer. Typically, it is worded something like "
+"<literal>Press F10 to select boot device</literal>, although the specific "
+"wording and the key that you must press varies widely from computer to "
+"computer. Consult the documentation for your computer or motherboard, or "
+"seek support from the hardware manufacturer or vendor. On Apple computers, "
+"the <keycap>C</keycap> key boots the system from the DVD drive. On older "
+"Apple hardware you might need to press <keycombo><keycap>Cmd</keycap> "
+"<keycap>Opt</keycap><keycap>Shift</keycap><keycap>Del</keycap></keycombo> to "
+"boot from the DVD drive."
+msgstr ""
+"ByÄ‡ moÅ¼e bÄ™dziesz musiaÅ‚ nacisnÄ…Ä‡ okreÅ›lony klawisz lub kombinacjÄ™ klawiszy "
+"lub skonfigurowaÄ‡ <firstterm>Podstawowy system wejÅ›cia/wyjÅ›cia</firstterm>, "
+"czyli <acronym>BIOS</acronym>, aby uruchomiÄ‡ z noÅ›nika. W wiÄ™kszoÅ›ci "
+"komputerÃ³w musisz wybraÄ‡ opcjÄ™ uruchamiania lub BIOS-u po wÅ‚Ä…czeniu "
+"komputera. WiÄ™kszoÅ›Ä‡ systemÃ³w komputerowych zgodnych z Windows uÅ¼ywa "
+"specjalnego klawisza, takiego jak <keycap>F1</keycap>, <keycap>F2</keycap>, "
+"<keycap>F12</keycap> lub <keycap>Del</keycap>, aby uruchomiÄ‡ menu "
+"konfiguracji BIOS-u. Na komputerach Apple'a klawisz <keycap>C</keycap> "
+"uruchamia system z napÄ™du DVD. Na starszym sprzÄ™cie Apple'a musisz nacisnÄ…Ä‡ "
+"<keycap>Cmd</keycap> +<keycap>Opt</keycap>+<keycap>Shift</keycap>"
+"+<keycap>Del</keycap>, aby uruchomiÄ‡ z napÄ™du DVD."
+
+#. Tag: para
+#: Boot_Order-para-2.xml:5
 #, no-c-format
-msgid "Congratulations! Your Fedora installation is now complete!"
+msgid ""
+"If your computer does not allow you to select a boot device as it starts up, "
+"you might need to configure your system's <firstterm>Basic Input/Output "
+"System</firstterm> (<acronym>BIOS</acronym>) to boot from the media."
+msgstr ""
+
+#. Tag: para
+#: Boot_Order-para-3.xml:5
+#, no-c-format
+msgid ""
+"To change your BIOS settings on an x86, AMD64, or <trademark class="
+"\"registered\">Intel</trademark> 64 system, watch the instructions provided "
+"on your display when your computer first boots. A line of text appears, "
+"telling you which key to press to enter the BIOS settings."
 msgstr ""
 
 #. Tag: para
-#: Complete_common-para-5.xml:5
+#: Boot_Order-para-4.xml:5
 #, no-c-format
 msgid ""
-"The first time you start your &PROD; system in run level 5 (the graphical "
-"run level), the <application>Setup Agent</application> is presented, which "
-"guides you through the &RHEL; configuration. Using this tool, you can set "
-"your system time and date, install software, register your machine with "
-"&RHN;, and more. The <application>Setup Agent</application> lets you "
-"configure your environment at the beginning, so that you can get started "
-"using your &RHEL; system quickly."
+"Once you have entered your BIOS setup program, find the section where you "
+"can alter your boot sequence. The default is often C, A or A, C (depending "
+"on whether you boot from your hard drive [C] or a diskette drive [A]). "
+"Change this sequence so that the CD-ROM is first in your boot order and that "
+"C or A (whichever is your typical boot default) is second. This instructs "
+"the computer to first look at the CD-ROM drive for bootable media; if it "
+"does not find bootable media on the CD-ROM drive, it then checks your hard "
+"drive or diskette drive."
 msgstr ""
 
 #. Tag: para
-#: Complete_common-para-6.xml:5
+#: Boot_Order-para-5.xml:5
 #, no-c-format
 msgid ""
-"For information on registering your Red Hat Enterprise Linux subscription, "
-"refer to <xref linkend=\"s1-steps-rhnreg-x86\"/>."
+"Save your changes before exiting the BIOS. For more information, refer to "
+"the documentation that came with your system."
+msgstr ""
+
+#. Tag: para
+#: Complete_common-para-1.xml:5
+#, no-c-format
+msgid "Congratulations! Your Fedora installation is now complete!"
 msgstr ""
 
 #. Tag: title
@@ -5285,19 +5279,49 @@ msgstr ""
 #. Tag: para
 #: Contributors_and_production_methods.xml:23
 #, no-c-format
+msgid "Jean-Paul Aubry (translator - French)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:28
+#, no-c-format
+msgid "David Barzilay (translator - Brazilian Portuguese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:33
+#, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/User:Beckerde\">Domingo Becker</"
 "ulink> (translator - Spanish)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:28
+#: Contributors_and_production_methods.xml:38
+#, no-c-format
+msgid "Subhransu Behera (translator - Oriya)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:43
 #, no-c-format
 msgid "MichaÅ‚ Bentkowski (translator - Polish)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:33
+#: Contributors_and_production_methods.xml:48
+#, no-c-format
+msgid "Rahul Bhalerao (translator - Marathi)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:53
+#, no-c-format
+msgid "Runa Bhattacharjee (translator - Bengali (India))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:58
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/TetaBilianou\">Teta Bilianou</"
@@ -5305,13 +5329,27 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:38
+#: Contributors_and_production_methods.xml:63
+#, no-c-format
+msgid "Vitor Vilas Boas (translator - Brazilian Portuguese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:68
 #, no-c-format
 msgid "Lucas Brausch (translator - German)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:43
+#: Contributors_and_production_methods.xml:73
+#, no-c-format
+msgid ""
+"<ulink url=\"http://fedoraproject.org/wiki/User:Logan\">Hector Daniel "
+"Cabrera </ulink> (translator - Spanish)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:78
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/DavidCantrell\">David Cantrell</"
@@ -5319,19 +5357,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:48
+#: Contributors_and_production_methods.xml:83
 #, no-c-format
 msgid "Guido Caruso (translator - Italian)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:53
+#: Contributors_and_production_methods.xml:88
 #, no-c-format
 msgid "Guillaume Chardin (translator - French)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:58
+#: Contributors_and_production_methods.xml:93
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/NikosCharonitakis\">Nikos "
@@ -5339,13 +5377,33 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:63
+#: Contributors_and_production_methods.xml:98
+#, no-c-format
+msgid "Chester Cheng (translator - Chinese (Traditional))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:103
+#, no-c-format
+msgid ""
+"<ulink url=\"http://fedoraproject.org/wiki/Tomchiukc\">Tom K. C. Chiu</"
+"ulink> (translator - Chinese (Traditional))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:108
+#, no-c-format
+msgid "Glaucia Cintra (translator - Brazilian Portuguese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:113
 #, no-c-format
 msgid "Fabien Decroux (translator - French)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:68
+#: Contributors_and_production_methods.xml:118
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/HansdeGoede\">Hans De Goede</"
@@ -5353,7 +5411,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:73
+#: Contributors_and_production_methods.xml:123
+#, no-c-format
+msgid "Claudio Rodrigo Pereyra Diaz (translator - Spanish)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:128
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/PiotrDr%C4%85g\">Piotr DrÄ…g</"
@@ -5361,7 +5425,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:78
+#: Contributors_and_production_methods.xml:133
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/DamienDurand\">Damien Durand</"
@@ -5369,7 +5433,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:83
+#: Contributors_and_production_methods.xml:138
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/StuartEllis\"> Stuart Ellis</"
@@ -5377,7 +5441,27 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:88
+#: Contributors_and_production_methods.xml:143
+#, no-c-format
+msgid ""
+"<ulink url=\"http://fedoraproject.org/wiki/User:Fakoor\"> Ali Fakoor</ulink> "
+"(translator - Persian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:148
+#, no-c-format
+msgid "Felix I (translator - Tamil)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:153
+#, no-c-format
+msgid "Tony Fu (translator - Chinese (Simplified))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:158
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/User:Pfrields\"> Paul W. "
@@ -5385,7 +5469,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:93
+#: Contributors_and_production_methods.xml:163
+#, no-c-format
+msgid "Paul Gampe (translator - Japanese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:168
+#, no-c-format
+msgid "Sree Ganesh (translator - Telugu)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:173
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/DimitrisGlezos\">Dimitris Glezos</"
@@ -5393,7 +5489,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:98
+#: Contributors_and_production_methods.xml:178
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/GuillermoGomez\">Guillermo GÃ³mez</"
@@ -5401,7 +5497,15 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:103
+#: Contributors_and_production_methods.xml:183
+#, no-c-format
+msgid ""
+"<ulink url=\"http://fedoraproject.org/wiki/Igorbounov\">Igor Gorbounov</"
+"ulink> (translator - Russian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:188
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/RuiGouveia\">Rui Gouveia</ulink> "
@@ -5409,25 +5513,55 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:108
+#: Contributors_and_production_methods.xml:193
+#, no-c-format
+msgid "Kiyoto James Hashida (translator - Japanese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:198
 #, no-c-format
 msgid "Severin Heiniger (translator - German)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:113
+#: Contributors_and_production_methods.xml:203
+#, no-c-format
+msgid "Xi Huang (translator - Chinese (Simplified))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:208
 #, no-c-format
 msgid "Ryuichi Hyugabaru (translator - Japanese)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:118
+#: Contributors_and_production_methods.xml:213
+#, no-c-format
+msgid "Jayaradha N (translator - Tamil)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:218
 #, no-c-format
 msgid "Chris Johnson (writer)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:123
+#: Contributors_and_production_methods.xml:223
+#, no-c-format
+msgid "Eunju Kim (translator - Korean)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:228
+#, no-c-format
+msgid "Michelle J Kim (translator - Korean)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:233
 #, no-c-format
 msgid ""
 "<ulink url=\"http://translate.fedoraproject.org/people/kmilos\">MiloÅ¡ "
@@ -5435,7 +5569,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:128
+#: Contributors_and_production_methods.xml:238
+#, no-c-format
+msgid "Alexey Kostyuk (translator - Russian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:243
+#, no-c-format
+msgid "Daniela Kugelmann (translator - German)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:248
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/User:Rlandmann\">RÃ¼diger "
@@ -5443,7 +5589,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:133
+#: Contributors_and_production_methods.xml:253
 #, no-c-format
 msgid ""
 "<ulink url=\"http://translate.fedoraproject.org/people/raada\">Magnus "
@@ -5451,7 +5597,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:138
+#: Contributors_and_production_methods.xml:258
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/ChristopherusLaurentius"
@@ -5459,25 +5605,51 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:143
+#: Contributors_and_production_methods.xml:263
+#, no-c-format
+msgid "Florent Le Coz (translator - French)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:268
 #, no-c-format
 msgid "Erick Lemon (writer)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:148
+#: Contributors_and_production_methods.xml:273
 #, no-c-format
-msgid "Wei Liu (translator - Chinese)"
+msgid "Andy Liu (translator - Chinese (Traditional))"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:153
+#: Contributors_and_production_methods.xml:278
 #, no-c-format
-msgid "Gan Lu (translator - Chinese)"
+msgid "Wei Liu (translator - Chinese (Simplified))"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:158
+#: Contributors_and_production_methods.xml:283
+#, no-c-format
+msgid "Yelitza Louze (translator - Spanish)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:288
+#, no-c-format
+msgid "Gan Lu (translator - Chinese (Simplified))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:293
+#, no-c-format
+msgid ""
+"<ulink url=\"http://fedoraproject.org/wiki/User:Jensm\">Jens Macher</ulink> "
+"(translator - German)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:298
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/IgorMiletic\">Igor MiletiÄ‡</"
@@ -5485,25 +5657,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:163
+#: Contributors_and_production_methods.xml:303
+#, no-c-format
+msgid "Noriko Mizumoto (translator - Japanese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:308
 #, no-c-format
 msgid "Jeremy W. Mooney (writer)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:168
+#: Contributors_and_production_methods.xml:313
 #, no-c-format
 msgid "EnikÅ‘ Nagy (translator - Hungarian)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:173
+#: Contributors_and_production_methods.xml:318
 #, no-c-format
 msgid "Igor NestoroviÄ‡ (translator - Serbian)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:178
+#: Contributors_and_production_methods.xml:323
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/User:ke4qqq\"> David Nalley</"
@@ -5511,19 +5689,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:183
+#: Contributors_and_production_methods.xml:328
 #, no-c-format
 msgid "John Nguyen (writer)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:188
+#: Contributors_and_production_methods.xml:333
+#, no-c-format
+msgid "Manuel Ospina (translator - Spanish)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:338
 #, no-c-format
 msgid "Janis Ozolins (translator - Latvian)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:193
+#: Contributors_and_production_methods.xml:343
+#, no-c-format
+msgid "Ankit Patel (translator - Gujarati)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:348
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/User:Dpaulo\">Davidson Paulo</"
@@ -5531,7 +5721,21 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:198
+#: Contributors_and_production_methods.xml:353
+#, no-c-format
+msgid "Ani Peter (translator - Malayalam)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:358
+#, no-c-format
+msgid ""
+"<ulink url=\"https://translate.fedoraproject.org/people/aphukan\">Amitakhya "
+"Phukan</ulink> (translator - Assamese)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:363
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/User:Perplex\">Silvio Pierro</"
@@ -5539,25 +5743,45 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:203
+#: Contributors_and_production_methods.xml:368
 #, no-c-format
-msgid "Micha Pietsch (translator - German)"
+msgid ""
+"<ulink url=\"https://fedoraproject.org/wiki/User:Barney\">Micha Pietsch</"
+"ulink> (translator - German)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:208
+#: Contributors_and_production_methods.xml:373
 #, no-c-format
 msgid "JosÃ© Nuno Pires (translator - Portuguese)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:213
+#: Contributors_and_production_methods.xml:378
 #, no-c-format
 msgid "Piotr PodgÃ³rski (translator - Polish)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:218
+#: Contributors_and_production_methods.xml:383
+#, no-c-format
+msgid "Yulia Poyarkova (translator - Russian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:388
+#, no-c-format
+msgid "Shankar Prasad (translator - Kannada)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:393
+#, no-c-format
+msgid "Rajesh Ranjan (translator - Hindi)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:398
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/TommyReynolds\"> Tommy Reynolds "
@@ -5565,13 +5789,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:223
+#: Contributors_and_production_methods.xml:403
 #, no-c-format
 msgid "Tim Richert (translator - German)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:228
+#: Contributors_and_production_methods.xml:408
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/DominikSandjaja\">Dominik "
@@ -5579,7 +5803,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:233
+#: Contributors_and_production_methods.xml:413
 #, no-c-format
 msgid ""
 "<ulink url=\"http://translate.fedoraproject.org/people/szaman\">Sharuzzaman "
@@ -5587,13 +5811,35 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:238
+#: Contributors_and_production_methods.xml:418
+#, no-c-format
+msgid ""
+"<ulink url=\"https://fedoraproject.org/wiki/User:Saeedi\">Mohsen Saeedi</"
+"ulink> (translator - Persian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:423
+#, no-c-format
+msgid ""
+"<ulink url=\"https://fedoraproject.org/wiki/User:Tiansworld\">Tian Shixiong</"
+"ulink> (translator - Chinese (Simplified))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:428
+#, no-c-format
+msgid "Audrey Simons (translator - French)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:433
 #, no-c-format
 msgid "Keld Simonsen (translator - Danish)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:243
+#: Contributors_and_production_methods.xml:438
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/User:Jsmith\"> Jared K. Smith</"
@@ -5601,13 +5847,29 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:248
+#: Contributors_and_production_methods.xml:443
 #, no-c-format
 msgid "Espen Stefansen (translator - Norwegian BokmÃ¥l)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:253
+#: Contributors_and_production_methods.xml:448
+#, no-c-format
+msgid ""
+"<ulink url=\"https://fedoraproject.org/wiki/User:Peti\"> Sulyok PÃ©ter</"
+"ulink> (translator - Hungarian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:453
+#, no-c-format
+msgid ""
+"<ulink url=\"https://fedoraproject.org/wiki/User:Zoli73\"> SÃ¼megi ZoltÃ¡n</"
+"ulink> (translator - Hungarian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:458
 #, no-c-format
 msgid ""
 "<ulink url=\"https://fedoraproject.org/wiki/User:Tombo\">Francesco "
@@ -5615,7 +5877,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:258
+#: Contributors_and_production_methods.xml:463
+#, no-c-format
+msgid "Timo Trinks (translator - German)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:468
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/DimitriosTypaldos\">Dimitris "
@@ -5623,13 +5891,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:263
+#: Contributors_and_production_methods.xml:473
 #, no-c-format
 msgid "GÃ¶ran Uddeborg (translator - Swedish)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:268
+#: Contributors_and_production_methods.xml:478
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/MichaelUghetto\">MichaÃ«l Ughetto</"
@@ -5637,7 +5905,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:273
+#: Contributors_and_production_methods.xml:483
+#, no-c-format
+msgid "Francesco Valente (translator - Italian)"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:488
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/KarstenWade\"> Karsten Wade</"
@@ -5645,7 +5919,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:278
+#: Contributors_and_production_methods.xml:493
+#, no-c-format
+msgid "Sarah Saiying Wang (translator - Chinese (Simplified))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:498
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/GeertWarrink\">Geert Warrink</"
@@ -5653,47 +5933,67 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:283
+#: Contributors_and_production_methods.xml:503
 #, no-c-format
 msgid "Elizabeth Ann West (editor)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:288
+#: Contributors_and_production_methods.xml:508
 #, no-c-format
-msgid "Xiaofan Yang (translator - Chinese)"
+msgid "Tyronne Wickramarathne (translator - Sinhalese)"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:293
+#: Contributors_and_production_methods.xml:513
+#, no-c-format
+msgid "Ben Wu (translator - Chinese (Traditional))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:518
+#, no-c-format
+msgid "Xiaofan Yang (translator - Chinese (Simplified))"
+msgstr ""
+
+#. Tag: para
+#: Contributors_and_production_methods.xml:523
 #, no-c-format
 msgid ""
 "<ulink url=\"http://translate.fedoraproject.org/people/bbbush\">Yuan Yijun</"
-"ulink> (translator - Chinese)"
+"ulink> (translator - Chinese (Simplified))"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:298
+#: Contributors_and_production_methods.xml:528
 #, no-c-format
 msgid ""
 "<ulink url=\"http://fedoraproject.org/wiki/DiegoZacarao\">Diego BÃºrigo "
 "ZacarÃ£o</ulink> (translator - Brazilian Portuguese)"
 msgstr ""
 
+#. Tag: para
+#: Contributors_and_production_methods.xml:533
+#, no-c-format
+msgid ""
+"<ulink url=\"http://fedoraproject.org/wiki/User:Izaac\">Izaac Zavaleta</"
+"ulink> (translator - Spanish)"
+msgstr ""
+
 #. Tag: ulink
-#: Contributors_and_production_methods.xml:305
+#: Contributors_and_production_methods.xml:540
 #, no-c-format
 msgid "http://docs.fedoraproject.org/install-guide/"
 msgstr ""
 
 #. Tag: title
-#: Contributors_and_production_methods.xml:308
+#: Contributors_and_production_methods.xml:543
 #, no-c-format
 msgid "Production methods"
 msgstr ""
 
 #. Tag: para
-#: Contributors_and_production_methods.xml:309
+#: Contributors_and_production_methods.xml:544
 #, no-c-format
 msgid ""
 "Writers produce the Install Guide directly in DocBook XML in a revision "
@@ -6493,14 +6793,26 @@ msgstr ""
 msgid "Configure ISCSI Parameters."
 msgstr ""
 
+#. Tag: title
+#: Disk_Partitioning_Advanced_Storage_common-figure-3.xml:5
+#, no-c-format
+msgid "<title>Configure FCoE Parameters</title>"
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Advanced_Storage_common-figure-3.xml:8
+#, no-c-format
+msgid "<para>Configure FCoE Parameters</para>"
+msgstr ""
+
 #. Tag: para
 #: Disk_Partitioning_Advanced_Storage_common-para-1.xml:5
 #, no-c-format
 msgid ""
-"From this screen you can choose to disable a dmraid device, in which case "
-"the individual elements of the dmraid device will appear as separate hard "
-"drives. You can also choose to configure an iSCSI (SCSI over TCP/IP) target. "
-"See <xref linkend=\"ISCSI_disks\"/> for an introduction to iSCSI."
+"From this screen you can configure an <firstterm>iSCSI</firstterm> (SCSI "
+"over TCP/IP) target or <firstterm>FCoE</firstterm> (Fibre channel over "
+"ethernet) <firstterm>SAN</firstterm> (storage area network). Refer to <xref "
+"linkend=\"ISCSI_disks\"/> for an introduction to iSCSI."
 msgstr ""
 
 #. Tag: para
@@ -6527,10 +6839,39 @@ msgid ""
 "initiator name you will need to restart the installation."
 msgstr ""
 
+#. Tag: para
+#: Disk_Partitioning_Advanced_Storage_common-para-4.xml:5
+#, no-c-format
+msgid ""
+"To configure an FCoE SAN, select <guilabel>Add FCoE SAN</guilabel> and click "
+"<guibutton>Add Drive</guibutton>."
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Advanced_Storage_common-para-5.xml:5
+#, no-c-format
+msgid ""
+"On the menu that appears in the next dialog box, select the network "
+"interface that is connected to your FCoE switch and click <guibutton>Add "
+"FCoE Disk(s)</guibutton>."
+msgstr ""
+
+#. Tag: title
+#: Disk_Partitioning_Advanced_Storage_common-title-2.xml:5
+#, no-c-format
+msgid "Configure iSCSI Parameters"
+msgstr ""
+
+#. Tag: title
+#: Disk_Partitioning_Advanced_Storage_common-title-3.xml:5
+#, no-c-format
+msgid "Configure FCoE Parameters"
+msgstr ""
+
 #. Tag: primary
 #: Disk_Partitioning_Advanced_Storage-indexterm2.xml:8
 #, no-c-format
-msgid "dmraid"
+msgid "FCoE"
 msgstr ""
 
 #. Tag: para
@@ -6686,25 +7027,73 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:14
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:15
+#, no-c-format
+msgid "Intel BIOS-RAID"
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:16
+#, no-c-format
+msgid ""
+"In Fedora 12, <application>anaconda</application> uses <application>mdraid</"
+"application> instead of <application>dmraid</application> to access Intel "
+"BIOS-RAID sets that use the Intel Matrix Storage Manager metadata format. "
+"<application>Mdraid</application> supports Intel Matrix Storage Manager RAID "
+"0, RAID 1, RAID 5, and RAID 10 sets."
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:19
+#, no-c-format
+msgid ""
+"If you have Intel BIOS-RAID sets on your system that use the Intel Matrix "
+"Storage Manager metadata format and you upgrade from a previous version of "
+"Fedora, the device node names will change. Therefore, take special "
+"precautions when upgrading systems that incorporate this hardware."
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:22
+#, no-c-format
+msgid ""
+"By default, Fedora does not refer to these devices by their device node "
+"names, but uses UUID, so you should not encounter problems if you upgrade a "
+"system with a default Fedora installations."
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:25
+#, no-c-format
+msgid ""
+"However, on installations with local modifications to <filename>/etc/fstab</"
+"filename>, <filename>/etc/crypttab</filename>, or to other configuration "
+"files which refer to device node names, you must manually edit the affected "
+"files to refer to the devices by UUID instead of by device node path. You "
+"can use the output of the <command>blkid</command> command to obtain the "
+"UUIDs of the devices on your system."
+msgstr ""
+
+#. Tag: title
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:30
 #, no-c-format
 msgid "RAID options"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:17
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:33
 #, no-c-format
 msgid "The RAID options dialog."
 msgstr ""
 
 #. Tag: guilabel
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:26
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:42
 #, no-c-format
 msgid "<guilabel>Create a software RAID partition</guilabel>"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:29
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:45
 #, no-c-format
 msgid ""
 "Choose this option to add a partition for software RAID. This option is the "
@@ -6712,25 +7101,25 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:35
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:51
 #, no-c-format
 msgid "<title>Create a software RAID partition</title>"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:38
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:54
 #, no-c-format
 msgid "The create a software RAID partition dialog."
 msgstr ""
 
 #. Tag: guilabel
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:51
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:67
 #, no-c-format
 msgid "<guilabel>Create a RAID device</guilabel>"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:53
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:69
 #, no-c-format
 msgid ""
 "Choose this option to construct a RAID device from two or more existing "
@@ -6739,25 +7128,25 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:60
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:76
 #, no-c-format
 msgid "<title>Create a RAID device</title>"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:63
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:79
 #, no-c-format
 msgid "The create a RAID device dialog."
 msgstr ""
 
 #. Tag: guilabel
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:74
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:90
 #, fuzzy, no-c-format
 msgid "Clone a drive to create a RAID device"
 msgstr "Wybierz dysk lub urzÄ…dzenie"
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:77
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:93
 #, no-c-format
 msgid ""
 "Choose this option to set up a RAID <firstterm>mirror</firstterm> of an "
@@ -6766,13 +7155,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:84
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:100
 #, no-c-format
 msgid "Clone a RAID device"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:87
+#: Disk_Partitioning_Disk_Druid-listitem-makeraid.xml:103
 #, no-c-format
 msgid "The clone a RAID device dialog."
 msgstr ""
@@ -6826,74 +7215,84 @@ msgstr ""
 #: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:23
 #, no-c-format
 msgid ""
-"The <filename>/bin/</filename>, <filename>/dev/</filename>, <filename>/etc/</"
-"filename>, <filename>/lib/</filename>, <filename>/proc/</filename>, "
-"<filename>/root/</filename>, and <filename>/sbin/</filename> directories may "
-"not be used for separate partitions in <application>Disk Druid</"
-"application>. These directories reside on the <indexterm> "
-"<primary>partition</primary> <secondary>root</secondary> </indexterm> "
-"<filename>/</filename> (root) partition."
+"You cannot create separate partitions for the <filename>/bin/</filename>, "
+"<filename>/dev/</filename>, <filename>/etc/</filename>, <filename>/lib/</"
+"filename>, <filename>/proc/</filename>, <filename>/root/</filename>, and "
+"<filename>/sbin/</filename> directories. These directories must reside on "
+"the <indexterm> <primary>partition</primary> <secondary>root</secondary> </"
+"indexterm> <filename>/</filename> (root) partition."
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:36
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:34
 #, no-c-format
 msgid ""
 "The <filename>/boot</filename> partition may not reside on an LVM volume "
 "group. Create the <filename>/boot</filename> partition before configuring "
-"any volume groups."
+"any volume groups. Furthermore, you cannot use the btrfs file system for the "
+"<filename>/boot</filename> partition."
+msgstr ""
+
+#. Tag: para
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:40
+#, no-c-format
+msgid ""
+"Avoid placing <filename>/usr</filename> on a separate partition. If "
+"<filename>/usr</filename> does not reside on the <filename>/</filename> "
+"(root) partition, the boot process becomes more complex and some systems "
+"(for example, those with iSCSI storage) will fail to boot."
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:42
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:45
 #, no-c-format
 msgid "You may also choose from three options for sizing your partition:"
 msgstr ""
 
 #. Tag: guilabel
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:48
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:51
 #, no-c-format
 msgid "Fixed size"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:50
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:53
 #, no-c-format
 msgid "Use a fixed size as close to your entry as possible."
 msgstr ""
 
 #. Tag: guilabel
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:57
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:60
 #, no-c-format
 msgid "Fill all space up to"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:59
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:62
 #, no-c-format
 msgid "Grow the partition to a maximum size of your choice."
 msgstr ""
 
 #. Tag: guilabel
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:66
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:69
 #, no-c-format
 msgid "Fill to maximum allowable size"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:69
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:72
 #, no-c-format
 msgid "Grow the partition until it fills the remainder of the selected disks."
 msgstr ""
 
 #. Tag: title
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:77
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:80
 #, fuzzy, no-c-format
 msgid "Partition Sizes"
 msgstr "Partycjonowanie dysku"
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:79
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:82
 #, no-c-format
 msgid ""
 "The actual partition on the disk may be slightly smaller or larger than your "
@@ -6901,7 +7300,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:85
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:88
 #, no-c-format
 msgid ""
 "Select the <guilabel>Encrypt partition</guilabel> option to encrypt all "
@@ -6909,7 +7308,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:89
+#: Disk_Partitioning_Disk_Druid_x86_ppc-listitem-1.xml:92
 #, no-c-format
 msgid ""
 "After you enter the details for your partition, select <guibutton>OK</"
@@ -7033,11 +7432,8 @@ msgstr ""
 #: Disk_Partitioning_Graphical_common-para-2.xml:8
 #, no-c-format
 msgid ""
-"Above the display, you can review the <guilabel>Drive</guilabel> name (such "
-"as /dev/hda), the <guilabel>Geom</guilabel> (which shows the hard disk's "
-"geometry and consists of three numbers representing the number of cylinders, "
-"heads, and sectors as reported by the hard disk), and the <guilabel>Model</"
-"guilabel> of the hard drive as detected by the installation program."
+"Above the display, you can review the name of the drive (such as /dev/hda), "
+"its size (in MB), and its model as detected by the installation program."
 msgstr ""
 
 #. Tag: para
@@ -7054,53 +7450,6 @@ msgstr ""
 msgid "Graphical Display of Hard Drive(s)"
 msgstr ""
 
-#. Tag: title
-#: Disk_Partitioning_IA64_Partitions.xml:7
-#, no-c-format
-msgid "Itanium systems"
-msgstr ""
-
-#. Tag: emphasis
-#: Disk_Partitioning_IA64_Partitions.xml:9
-#, no-c-format
-msgid ""
-"Unless you have a reason for doing otherwise, we recommend that you create "
-"the following partitions for <guilabel>Itanium</guilabel> systems:"
-msgstr ""
-
-#. Tag: filename
-#: Disk_Partitioning_IA64_Partitions.xml:13
-#, no-c-format
-msgid "/boot/efi/"
-msgstr ""
-
-#. Tag: para
-#: Disk_Partitioning_IA64_Partitions.xml:19
-#, no-c-format
-msgid ""
-"A <filename>/boot/efi/</filename> partition (100 MB minimum) — the "
-"partition mounted on <filename>/boot/efi/</filename> contains all the "
-"installed kernels, the initrd images, and ELILO configuration files."
-msgstr ""
-
-#. Tag: para
-#: Disk_Partitioning_IA64_Partitions.xml:26
-#, no-c-format
-msgid ""
-"You must create a <filename>/boot/efi/</filename> partition of type VFAT and "
-"at least 100 MB in size as the first primary partition."
-msgstr ""
-
-#. Tag: para
-#: Disk_Partitioning_IA64_Partitions.xml:33
-#, no-c-format
-msgid ""
-"A root partition (3.0 GB - 5.0 GB) — this is where \"<filename>/</"
-"filename>\" (the root directory) is located. In this setup, all files "
-"(except those stored in <filename>/boot/efi</filename>) are on the root "
-"partition."
-msgstr ""
-
 #. Tag: primary
 #: Disk_Partitioning_Scheme_common-indexterm-1.xml:9
 #, no-c-format
@@ -7146,6 +7495,15 @@ msgid ""
 "are on the root partition."
 msgstr ""
 
+#. Tag: para
+#: Disk_Partitioning_Scheme_common-listitem-1.xml:13
+#, no-c-format
+msgid ""
+"A 3.0 GB partition allows you to install a minimal installation, while a 5.0 "
+"GB root partition lets you perform a full installation, choosing all package "
+"groups."
+msgstr ""
+
 #. Tag: title
 #: Disk_Partitioning_Scheme_common-listitem-1.xml:18
 #, fuzzy, no-c-format
@@ -7171,9 +7529,9 @@ msgstr ""
 
 #. Tag: title
 #: Disk_Partitioning_Scheme_x86_s390-para-1.xml:6
-#, no-c-format
-msgid "A <filename>/boot/</filename> partition (100 MB)"
-msgstr ""
+#, fuzzy, no-c-format
+msgid "A <filename>/boot/</filename> partition (250 MB)"
+msgstr "Root i <filename class=\"directory\">/root</filename>"
 
 #. Tag: para
 #: Disk_Partitioning_Scheme_x86_s390-para-1.xml:7
@@ -7182,7 +7540,7 @@ msgid ""
 "The partition mounted on <filename>/boot/</filename> contains the operating "
 "system kernel (which allows your system to boot Fedora), along with files "
 "used during the bootstrap process. Due to limitations, creating a native "
-"ext3 partition to hold these files is required. For most users, a 100 MB "
+"ext3 partition to hold these files is required. For most users, a 250 MB "
 "boot partition is sufficient."
 msgstr ""
 
@@ -7223,7 +7581,7 @@ msgstr ""
 #: Disk_Partitioning_Setup_common-para-2.xml:8
 #, no-c-format
 msgid ""
-"The first three options allow you to perform an automated installation "
+"The first four options allow you to perform an automated installation "
 "without having to partition your drive(s) yourself. If you do not feel "
 "comfortable with partitioning your system, it is recommended that you "
 "<emphasis>do not</emphasis> choose to create a custom layout and instead let "
@@ -7242,19 +7600,6 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_Setup_common-warning-2.xml:8
-#, no-c-format
-msgid ""
-"Once you have accepted a partitioning scheme, a dialog box appears and asks "
-"you whether to write changes to the disk. If, for some reason, you would "
-"rather not continue with the installation process, this is your last "
-"opportunity to safely cancel the process and reboot your machine. Once you "
-"press the <guibutton>Write changes to disk</guibutton> button, partitions "
-"are written. If you wish to abort the installation, you should reboot now "
-"before any existing information on any hard drive is rewritten."
-msgstr ""
-
-#. Tag: para
 #: Disk_Partitioning_Setup_common-warning-para-1.xml:8
 #, no-c-format
 msgid ""
@@ -7348,14 +7693,6 @@ msgstr "Root i <filename class=\"directory\">/root</filename>"
 #: Disk_Partitioning_X86_Partitions.xml:41
 #, no-c-format
 msgid ""
-"The <application>GRUB</application> bootloader does not support the ext4 "
-"file system. You cannot use an ext4 partition for /boot/."
-msgstr ""
-
-#. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:46
-#, no-c-format
-msgid ""
 "If your hard drive is more than 1024 cylinders (and your system was "
 "manufactured more than two years ago), you may need to create a <filename>/"
 "boot/</filename> partition if you want the <filename>/</filename> (root) "
@@ -7363,7 +7700,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:52
+#: Disk_Partitioning_X86_Partitions.xml:47
 #, no-c-format
 msgid ""
 "If you have a RAID card, be aware that some BIOSes do not support booting "
@@ -7373,7 +7710,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:65
+#: Disk_Partitioning_X86_Partitions.xml:60
 #, no-c-format
 msgid ""
 "Many systems have more partitions than the minimum listed above. Choose "
@@ -7384,17 +7721,17 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:74
+#: Disk_Partitioning_X86_Partitions.xml:69
 #, no-c-format
 msgid ""
 "If you create many partitions instead of one large <filename class="
 "\"partition\">/</filename> partition, upgrades become easier. Refer to the "
-"description of <application>Disk Druid's</application> Edit option in <xref "
-"linkend=\"s2-diskpartitioning-dd-x86\"/> for more information."
+"description the Edit option in <xref linkend=\"s2-diskpartitioning-dd-x86\"/"
+"> for more information."
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:83
+#: Disk_Partitioning_X86_Partitions.xml:77
 #, no-c-format
 msgid ""
 "The following table summarizes minimum partition sizes for the partitions "
@@ -7407,79 +7744,74 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Disk_Partitioning_X86_Partitions.xml:95
+#: Disk_Partitioning_X86_Partitions.xml:89
 #, no-c-format
 msgid "Minimum partition sizes"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:99
+#: Disk_Partitioning_X86_Partitions.xml:93
 #, no-c-format
 msgid "Directory"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:100
+#: Disk_Partitioning_X86_Partitions.xml:94
 #, no-c-format
 msgid "Minimum size"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:106
+#: Disk_Partitioning_X86_Partitions.xml:100
+#: Disk_Partitioning_X86_Partitions.xml:120
 #, no-c-format
 msgid "250 MB"
 msgstr ""
 
 #. Tag: filename
-#: Disk_Partitioning_X86_Partitions.xml:109
+#: Disk_Partitioning_X86_Partitions.xml:103
 #, no-c-format
 msgid "/usr"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:110
+#: Disk_Partitioning_X86_Partitions.xml:104
 #, no-c-format
 msgid "250 MB, but avoid placing this on a separate partition"
 msgstr ""
 
 #. Tag: filename
-#: Disk_Partitioning_X86_Partitions.xml:113
+#: Disk_Partitioning_X86_Partitions.xml:107
 #, no-c-format
 msgid "/tmp"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:114
+#: Disk_Partitioning_X86_Partitions.xml:108
 #, no-c-format
 msgid "50 MB"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:118
+#: Disk_Partitioning_X86_Partitions.xml:112
 #, no-c-format
 msgid "384 MB"
 msgstr ""
 
 #. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:122
+#: Disk_Partitioning_X86_Partitions.xml:116
 #, no-c-format
 msgid "100 MB"
 msgstr ""
 
-#. Tag: entry
-#: Disk_Partitioning_X86_Partitions.xml:126
-#, no-c-format
-msgid "75 MB"
-msgstr ""
-
 #. Tag: title
-#: Disk_Partitioning_X86_Partitions.xml:134
+#: Disk_Partitioning_X86_Partitions.xml:128
 #, no-c-format
 msgid "Leave Excess Capacity Unallocated"
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:135
+#: Disk_Partitioning_X86_Partitions.xml:129
 #, no-c-format
 msgid ""
 "Only assign storage capacity to those partitions you require immediately. "
@@ -7489,7 +7821,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Disk_Partitioning_X86_Partitions.xml:144
+#: Disk_Partitioning_X86_Partitions.xml:138
 #, no-c-format
 msgid ""
 "If you are not sure how best to configure the partitions for your computer, "
@@ -7562,283 +7894,6 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Driver_Disk-x86.xml:5
-#, no-c-format
-msgid ""
-"Driver Media for <trademark class=\"registered\">Intel</trademark> and AMD "
-"Systems"
-msgstr ""
-
-#. Tag: primary
-#: Driver_Disk-x86.xml:7 Driver_Disk-x86.xml:55 Driver_Disk-x86.xml:69
-#: Driver_Disk-x86.xml:82 Driver_Disk-x86.xml:122
-#, no-c-format
-msgid "driver media"
-msgstr ""
-
-#. Tag: primary
-#: Driver_Disk-x86.xml:10
-#, no-c-format
-msgid "diskette"
-msgstr ""
-
-#. Tag: secondary
-#: Driver_Disk-x86.xml:11
-#, no-c-format
-msgid "media"
-msgstr ""
-
-#. Tag: title
-#: Driver_Disk-x86.xml:14
-#, no-c-format
-msgid "Why Do I Need Driver Media?"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:35
-#, no-c-format
-msgid ""
-"There is no driver available for a piece of hardware that is necessary for "
-"installation to proceed."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:40
-#, no-c-format
-msgid ""
-"If you run the installation program by entering <userinput>linux dd</"
-"userinput> at the installation boot prompt."
-msgstr ""
-
-#. Tag: title
-#: Driver_Disk-x86.xml:53
-#, no-c-format
-msgid "How Do I Obtain Driver Media?"
-msgstr ""
-
-#. Tag: secondary
-#: Driver_Disk-x86.xml:56
-#, no-c-format
-msgid "produced by Red Hat"
-msgstr ""
-
-#. Tag: secondary
-#: Driver_Disk-x86.xml:70
-#, no-c-format
-msgid "produced by others"
-msgstr ""
-
-#. Tag: title
-#: Driver_Disk-x86.xml:80
-#, no-c-format
-msgid "Creating a Driver Diskette from an Image File"
-msgstr ""
-
-#. Tag: secondary
-#: Driver_Disk-x86.xml:83
-#, no-c-format
-msgid "creating diskette from image"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:85
-#, no-c-format
-msgid "To create a driver diskette from a driver diskette image using Linux:"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:91
-#, no-c-format
-msgid "Insert a blank, formatted diskette into the first diskette drive."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:97
-#, no-c-format
-msgid ""
-"From the same directory containing the driver diskette image, such as "
-"<filename><replaceable>drvnet.img</replaceable></filename>, type <command>dd "
-"if=<replaceable>drvnet.img</replaceable> of=/dev/fd0</command> as root."
-msgstr ""
-
-#. Tag: primary
-#: Driver_Disk-x86.xml:105
-#, no-c-format
-msgid "USB pen card"
-msgstr ""
-
-#. Tag: secondary
-#: Driver_Disk-x86.xml:106
-#, no-c-format
-msgid "driver image"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:108
-#, no-c-format
-msgid ""
-"The installation program supports using an external flash drive as a way to "
-"add driver images during the installation process. The best way to do this "
-"is to mount the flash drive and copy the desired <filename>driverdisk.img</"
-"filename> onto the flash drive. For example:"
-msgstr ""
-
-#. Tag: screen
-#: Driver_Disk-x86.xml:111
-#, no-c-format
-msgid "dd if=driverdisk.img of=/dev/sda"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:112
-#, no-c-format
-msgid ""
-"You are then prompted during the installation to select the partition and "
-"specify the file to be used."
-msgstr ""
-
-#. Tag: title
-#: Driver_Disk-x86.xml:120
-#, no-c-format
-msgid "Using a Driver Image During Installation"
-msgstr ""
-
-#. Tag: secondary
-#: Driver_Disk-x86.xml:123
-#, no-c-format
-msgid "using a driver image"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk-x86.xml:128
-#, no-c-format
-msgid ""
-"For example, to specifically load a driver diskette that you have created, "
-"begin the installation process by booting from the Fedora DVD (or using boot "
-"media you have created). For x86-based systems, at the <prompt>boot:</"
-"prompt> prompt, enter <userinput>linux dd</userinput> if using an x86 or x86-"
-"64 system. Refer to <xref linkend=\"s2-x86-starting-booting\"/> for details "
-"on booting the installation program."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-listitem1.xml:9
-#, no-c-format
-msgid "If you need to perform an installation from a network device"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-listitem-2.xml:9
-#, no-c-format
-msgid "If you need to perform an installation from a block device"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-listitem-3.xml:10
-#, no-c-format
-msgid "If you need to perform an installation from a PCMCIA device"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-listitem-4.xml:9
-#, no-c-format
-msgid ""
-"If you run the installation program on a computer which does not have any "
-"PCI devices"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-para-1.xml:5
-#, no-c-format
-msgid ""
-"While the Fedora installation program is loading, a screen may appear asking "
-"you for driver media. The driver media screen is most often seen in the "
-"following scenarios:"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-para-2.xml:5
-#, no-c-format
-msgid ""
-"Driver images may be available from a hardware or software vendor's website. "
-"If you suspect that your system may require one of these drivers, you should "
-"create a driver diskette or CD-ROM before beginning your Fedora installation."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-para-5.xml:8
-#, no-c-format
-msgid ""
-"If you need to use a driver image, such as during a PCMCIA device or NFS "
-"installation, the installation program prompts you to insert the driver (as "
-"a diskette, CD-ROM, or file name) when it is needed."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-para-6.xml:8
-#, no-c-format
-msgid ""
-"However, there are some cases where you must specifically tell the &PROD; "
-"installation program to load that driver diskette and use it during the "
-"installation process."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-para-7.xml:5
-#, no-c-format
-msgid ""
-"The installation program asks you to insert the driver diskette. Once the "
-"driver diskette is read by the installation program, it can apply those "
-"drivers to hardware discovered on your system later in the installation "
-"process."
-msgstr ""
-
-#. Tag: title
-#: Driver_Disk_x86_ppc-section-2.xml:6
-#, no-c-format
-msgid "So What Is Driver Media Anyway?"
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-section-2.xml:8
-#, no-c-format
-msgid ""
-"Driver media can add support for hardware that may or may not be supported "
-"by the installation program. Driver media could include a driver diskette or "
-"image produced by Red Hat, it could be a diskette or CD-ROM you make "
-"yourself from driver images found on the Internet, or it could be a diskette "
-"or CD-ROM that a hardware vendor includes with a piece of hardware."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-section-2.xml:12
-#, no-c-format
-msgid ""
-"Driver media is used if you need access to a particular device to install "
-"Fedora. Drivers can be used for non-standard, very new, or uncommon devices."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-section-2.xml:19
-#, no-c-format
-msgid ""
-"If an unsupported device is not needed to install Fedora on your system, "
-"continue with the installation and add support for the new piece of hardware "
-"once the installation is complete."
-msgstr ""
-
-#. Tag: para
-#: Driver_Disk_x86_ppc-tip-1.xml:9
-#, no-c-format
-msgid ""
-"It is also possible to use a driver image via a network file. Instead of "
-"using the <command>linux dd</command> boot command, use the <command>linux "
-"dd=<replaceable>url</replaceable></command> command, where <replaceable>url</"
-"replaceable> is replaced by an HTTP, FTP, or NFS address of the driver image "
-"to be used."
-msgstr ""
-
-#. Tag: title
 #: Editing_Partitions-common.xml:6
 #, no-c-format
 msgid "Editing Partitions"
@@ -7975,9 +8030,9 @@ msgstr "SprawdÅº pobrane pliki"
 
 #. Tag: para
 #: expert-quickstart.xml:43
-#, no-c-format
+#, fuzzy, no-c-format
 msgid ""
-"Downloads may fail for any number of reasons. Always verify the sha1sum of "
+"Downloads may fail for any number of reasons. Always verify the sha256sum of "
 "the downloaded files."
 msgstr ""
 "Pobranie moÅ¼e siÄ™ nie powieÅ›Ä‡ z wielu powodÃ³w. Zawsze sprawdÅº sumy kontrolne "
@@ -8070,38 +8125,38 @@ msgstr ""
 "moÅ¼na zainstalowaÄ‡ FedorÄ™, zobacz <xref linkend=\"ap-install-server\"/>."
 
 #. Tag: title
-#: expert-quickstart.xml:92
+#: expert-quickstart.xml:95
 #, no-c-format
 msgid "Prepare for Installation"
 msgstr "Przygotowanie do instalacji"
 
 #. Tag: primary
-#: expert-quickstart.xml:94
+#: expert-quickstart.xml:97
 #, no-c-format
 msgid "NTFS partitions"
 msgstr "Partycje NTFS"
 
 #. Tag: secondary
-#: expert-quickstart.xml:95
+#: expert-quickstart.xml:98
 #, no-c-format
 msgid "resizing"
 msgstr "zmienianie rozmiaru"
 
 #. Tag: para
-#: expert-quickstart.xml:97
+#: expert-quickstart.xml:100
 #, no-c-format
 msgid "Back up any user data you need to preserve."
 msgstr ""
 "Wykonaj kopiÄ™ zapasowÄ… wszystkich danych uÅ¼ytkownika, ktÃ³re chcesz zachowaÄ‡."
 
 #. Tag: title
-#: expert-quickstart.xml:99
+#: expert-quickstart.xml:102
 #, no-c-format
 msgid "Resizing Partitions"
 msgstr "Zmienianie rozmiaru partycji"
 
 #. Tag: para
-#: expert-quickstart.xml:100
+#: expert-quickstart.xml:103
 #, fuzzy, no-c-format
 msgid ""
 "The installation program provides functions for resizing ext2, ext3, ext4, "
@@ -8113,13 +8168,13 @@ msgstr ""
 "partitioning\"/>, aby dowiedzieÄ‡ siÄ™ wiÄ™cej."
 
 #. Tag: title
-#: expert-quickstart.xml:106
+#: expert-quickstart.xml:109
 #, no-c-format
 msgid "Install Fedora"
 msgstr "Instalacja Fedory"
 
 #. Tag: para
-#: expert-quickstart.xml:107
+#: expert-quickstart.xml:110
 #, no-c-format
 msgid ""
 "Boot from the desired media, with any options appropriate for your hardware "
@@ -8137,7 +8192,7 @@ msgstr ""
 "jÄ…dra, wybierz zasÃ³b sieciowy lub dysk twardy, z ktÃ³rego chcesz zainstalowaÄ‡."
 
 #. Tag: para
-#: expert-quickstart.xml:114
+#: expert-quickstart.xml:117
 #, no-c-format
 msgid ""
 "Proceed through all the steps of the installation program. The installation "
@@ -8149,13 +8204,13 @@ msgstr ""
 "Kiedy instalacja zostanie zakoÅ„czona, uruchom ponownie system."
 
 #. Tag: title
-#: expert-quickstart.xml:120
+#: expert-quickstart.xml:123
 #, no-c-format
 msgid "Perform Post-installation Steps"
 msgstr "Przeprowadzenie krokÃ³w poinstalacyjnych"
 
 #. Tag: para
-#: expert-quickstart.xml:121
+#: expert-quickstart.xml:124
 #, no-c-format
 msgid ""
 "After the system reboots, it displays additional configuration options. Make "
@@ -8164,49 +8219,23 @@ msgstr ""
 "Po ponownym uruchomieniu systemu wyÅ›wietlÄ… siÄ™ dodatkowe opcje konfiguracji. "
 "Wykonaj odpowiednie zmiany w systemie i przejdÅº do ekranu logowania."
 
-#. Tag: title
-#: Feedback.xml:5
-#, no-c-format
-msgid "Feedback"
-msgstr ""
-
-#. Tag: primary
-#: Feedback.xml:7
-#, no-c-format
-msgid "Fedora Docs Project"
-msgstr ""
-
-#. Tag: see
-#: Feedback.xml:8
-#, no-c-format
-msgid "<see>Fedora Documentation Project</see>"
-msgstr ""
-
-#. Tag: primary
-#: Feedback.xml:11
-#, no-c-format
-msgid "<primary>Fedora Documentation Project</primary>"
-msgstr ""
-
 #. Tag: para
-#: Feedback.xml:13
-#, no-c-format
+#: expert-quickstart.xml:127
+#, fuzzy, no-c-format
 msgid ""
-"The Fedora Documentation Project (Fedora Docs Project) is a group of "
-"volunteer writers, editors, translators, and other contributors who create "
-"content for free and open source software. The Fedora Docs Project maintains "
-"this document and is always interested in reader feedback."
+"Refer to <xref linkend=\"ch-firstboot\"/> or the Firstboot page on the "
+"Fedora wiki: <ulink url=\"http://fedoraproject.org/wiki/FirstBoot\"></ulink> "
+"for more detail."
 msgstr ""
+"Aby poznaÄ‡ dodatkowe ÅºrÃ³dÅ‚a pomocy dla Fedory, odwiedÅº <ulink url=\"http://"
+"fedoraproject.org/wiki/Communicate\"/>."
 
 #. Tag: para
-#: Feedback.xml:17
+#: ext4-and-btrfs.xml:8
 #, no-c-format
 msgid ""
-"To send feedback regarding this document, file a bug in Bugzilla. To file a "
-"bug, fill in \"Fedora Documentation\" as the Product, choose the name of "
-"this document from the Component list, and choose \"devel\" as the version. "
-"Fedora Docs Project volunteers receive your feedback, and may contact you "
-"for additional information, if necessary."
+"The <application>GRUB</application> bootloader does not support the Btrfs "
+"file system. You cannot use a btrfs partition for <filename>/boot</filename>."
 msgstr ""
 
 #. Tag: title
@@ -8249,7 +8278,7 @@ msgstr ""
 #: firstboot.xml:29
 #, fuzzy, no-c-format
 msgid ""
-"Select <guibutton>Forward</guibutton> to start the <application>Firstboot</"
+"Select <guibutton>Forward</guibutton> to start <application>Firstboot</"
 "application>."
 msgstr ""
 "Wybierz <guibutton>Dalej</guibutton>, aby uruchomiÄ‡ <application>Agenta "
@@ -8359,14 +8388,40 @@ msgstr ""
 "guilabel>, aby upewniÄ‡ siÄ™, Å¼e jest poprawne. OdwiedÅº <xref linkend=\"ch-"
 "rootpassword\"/>, aby dowiedzieÄ‡ siÄ™, jak wybraÄ‡ bezpieczne hasÅ‚o."
 
+#. Tag: para
+#: firstboot.xml:94
+#, no-c-format
+msgid ""
+"To configure Fedora to use network services for authentication or user "
+"information, select <guibutton>Use Network Login...</guibutton>."
+msgstr ""
+"Aby skonfigurowaÄ‡ FedorÄ™ do uÅ¼ywania usÅ‚ug sieciowych do uwierzytelniania "
+"lub informacji o uÅ¼ytkownikach, wybierz <guibutton>UÅ¼yj logowania "
+"sieciowego...</guibutton>."
+
 #. Tag: title
-#: firstboot.xml:95
+#: firstboot.xml:100
+#, fuzzy, no-c-format
+msgid "Create at least one user account"
+msgstr "Tworzenie dodatkowych kont uÅ¼ytkownikÃ³w"
+
+#. Tag: para
+#: firstboot.xml:101
+#, no-c-format
+msgid ""
+"If you do not create at least one user account in this step, you will not be "
+"able to log in to the Fedora graphical environment. If you skipped this step "
+"during installation, refer to <xref linkend=\"Trouble_After_Booting-GUI\"/>."
+msgstr ""
+
+#. Tag: title
+#: firstboot.xml:106
 #, no-c-format
 msgid "Creating Extra User Accounts"
 msgstr "Tworzenie dodatkowych kont uÅ¼ytkownikÃ³w"
 
 #. Tag: para
-#: firstboot.xml:96
+#: firstboot.xml:107
 #, fuzzy, no-c-format
 msgid ""
 "To add additional user accounts to your system after the installation is "
@@ -8378,25 +8433,14 @@ msgstr ""
 "wybierz <menuchoice><guimenu>System</guimenu><guisubmenu>Administracja</"
 "guisubmenu><guimenuitem>UÅ¼ytkownicy i grupy</guimenuitem></menuchoice>."
 
-#. Tag: para
-#: firstboot.xml:104
-#, no-c-format
-msgid ""
-"To configure Fedora to use network services for authentication or user "
-"information, select <guibutton>Use Network Login...</guibutton>."
-msgstr ""
-"Aby skonfigurowaÄ‡ FedorÄ™ do uÅ¼ywania usÅ‚ug sieciowych do uwierzytelniania "
-"lub informacji o uÅ¼ytkownikach, wybierz <guibutton>UÅ¼yj logowania "
-"sieciowego...</guibutton>."
-
 #. Tag: title
-#: firstboot.xml:112
+#: firstboot.xml:118
 #, no-c-format
 msgid "Date and Time"
 msgstr "Data i czas"
 
 #. Tag: para
-#: firstboot.xml:114
+#: firstboot.xml:120
 #, fuzzy, no-c-format
 msgid ""
 "If your system does not have Internet access or a network time server, "
@@ -8416,7 +8460,7 @@ msgstr ""
 "oferujÄ…cych publiczne usÅ‚ugi NTP."
 
 #. Tag: para
-#: firstboot.xml:127
+#: firstboot.xml:133
 #, no-c-format
 msgid ""
 "The initial display enables you to set the date and time of your system "
@@ -8424,19 +8468,19 @@ msgid ""
 msgstr "GÅ‚Ã³wny ekran pozwala rÄ™cznie ustawiÄ‡ datÄ™ i godzinÄ™ systemu."
 
 #. Tag: title
-#: firstboot.xml:132
+#: firstboot.xml:138
 #, no-c-format
 msgid "<title>Firstboot date and time screen</title>"
 msgstr ""
 
 #. Tag: para
-#: firstboot.xml:135
+#: firstboot.xml:141
 #, no-c-format
 msgid "<para>Firstboot date and time screen</para>"
 msgstr ""
 
 #. Tag: para
-#: firstboot.xml:143
+#: firstboot.xml:149
 #, no-c-format
 msgid ""
 "Select the <guilabel>Network Time Protocol</guilabel> tab to configure your "
@@ -8446,13 +8490,13 @@ msgstr ""
 "skonfigurowaÄ‡ system do uÅ¼ywania serwerÃ³w NTP."
 
 #. Tag: title
-#: firstboot.xml:148
+#: firstboot.xml:154
 #, no-c-format
 msgid "Setting the Clock"
 msgstr "Ustawianie zegara"
 
 #. Tag: para
-#: firstboot.xml:149
+#: firstboot.xml:155
 #, fuzzy, no-c-format
 msgid ""
 "To change these settings later, choose <menuchoice> <guimenu>System</"
@@ -8464,7 +8508,7 @@ msgstr ""
 "guimenuitem></menuchoice>."
 
 #. Tag: para
-#: firstboot.xml:156
+#: firstboot.xml:162
 #, no-c-format
 msgid ""
 "To configure your system to use network time servers, select the "
@@ -8478,19 +8522,19 @@ msgstr ""
 "ustawienia na tym ekranie."
 
 #. Tag: title
-#: firstboot.xml:163
+#: firstboot.xml:169
 #, no-c-format
 msgid "<title>Firstboot Network Time Protocol screen</title>"
 msgstr ""
 
 #. Tag: para
-#: firstboot.xml:166
+#: firstboot.xml:172
 #, no-c-format
 msgid "<para>Firstboot Network Time Protocol screen</para>"
 msgstr ""
 
 #. Tag: para
-#: firstboot.xml:174
+#: firstboot.xml:180
 #, no-c-format
 msgid ""
 "By default, Fedora is configured to use three separate groups, or "
@@ -8503,7 +8547,7 @@ msgstr ""
 "niedostÄ™pny, system zsynchronizuje siÄ™ z innym."
 
 #. Tag: para
-#: firstboot.xml:181
+#: firstboot.xml:187
 #, no-c-format
 msgid ""
 "To use an additional time server, select <guilabel>Add</guilabel>, and type "
@@ -8514,73 +8558,56 @@ msgstr ""
 "podaj nazwÄ™ DNS serwera w polu. Aby usunÄ…Ä‡ serwer lub grupÄ™ serwerÃ³w z "
 "listy, wybierz nazwÄ™ i naciÅ›nij <guilabel>UsuÅ„</guilabel>."
 
-#. Tag: para
-#: firstboot.xml:187
-#, no-c-format
-msgid ""
-"If your machine is always connected to the Internet through a wired "
-"connection, select the <guilabel>Synchronize system clock before starting "
-"service</guilabel> option. This option may cause a short delay during "
-"startup but ensures accurate time on your system even if the clock is "
-"significantly wrong at boot time."
-msgstr ""
-"JeÅ›li komputer jest zawsze poÅ‚Ä…czony z Internetem przez poÅ‚Ä…czenie "
-"przewodowe, wybierz opcjÄ™ <guilabel>Zsynchronizuj zegar systemowy przed "
-"uruchomieniem usÅ‚ugi</guilabel>. Ta opcja moÅ¼e powodowaÄ‡ krÃ³tkÄ… przerwÄ™ "
-"podczas uruchamiania, ale zapewnia, Å¼e czas w systemie jest dokÅ‚adny nawet, "
-"jeÅ›li zegar jest nieprawidÅ‚owy podczas uruchamiania."
-
 #. Tag: title
 #: firstboot.xml:194
+#, fuzzy, no-c-format
+msgid "Advanced options"
+msgstr "Zmienianie rozmiaru partycji"
+
+#. Tag: term
+#: firstboot.xml:197
 #, no-c-format
-msgid "Laptops and NTP"
-msgstr "Laptopy i NTP"
+msgid "Synchronize system clock before starting service"
+msgstr ""
 
 #. Tag: para
-#: firstboot.xml:195
+#: firstboot.xml:199
 #, no-c-format
 msgid ""
-"Do not use this option with laptop computers that sometimes use wireless "
-"networks."
+"If your computer is always connected to the Internet and "
+"<application>NetworkManager</application> is disabled or not installed, and "
+"you need accurate time information obtained as quickly as possible after the "
+"system boots, select the <guilabel>Synchronize system clock before starting "
+"service</guilabel> option. By default, Fedora uses "
+"<application>NetworkManager</application> to manage network interfaces."
 msgstr ""
-"Nie uÅ¼ywaj tej opcji na laptopach, ktÃ³re czasami uÅ¼ywajÄ… sieci "
-"bezprzewodowych."
 
-#. Tag: para
-#: firstboot.xml:198
+#. Tag: term
+#: firstboot.xml:205
 #, no-c-format
-msgid ""
-"If the hardware clock in your computer is highly inaccurate, you may turn "
-"off your local time source entirely. To turn off the local time source, "
-"select <guilabel>Show advanced options</guilabel> and then deselect the "
-"<guilabel>Use Local Time Source</guilabel> option. If you turn off your "
-"local time source, the NTP servers take priority over the internal clock."
+msgid "Use Local Time Source"
 msgstr ""
-"JeÅ›li zegar sprzÄ™towy w komputerze jest wysoce niedokÅ‚adny, moÅ¼na caÅ‚kowicie "
-"wyÅ‚Ä…czyÄ‡ lokalne ÅºrÃ³dÅ‚o czasu. Aby to zrobiÄ‡, wybierz <guilabel>WyÅ›wietl "
-"zaawansowane opcje</guilabel> i odznacz opcjÄ™ <guilabel>UÅ¼yj lokalnego "
-"ÅºrÃ³dÅ‚a czasu</guilabel>. JeÅ›li wyÅ‚Ä…czysz lokalne ÅºrÃ³dÅ‚o czasu, serwer NTP "
-"uzyska wyÅ¼szy priorytet niÅ¼ zegar wewnÄ™trzny."
 
 #. Tag: para
 #: firstboot.xml:207
 #, no-c-format
 msgid ""
-"If you enable the <guilabel>Enable NTP Broadcast</guilabel> advanced option, "
-"Fedora attempts to automatically locate time servers on the network."
+"The NTP daemon (<application>ntpd</application>) on your computer usually "
+"refers to external NTP servers for authoritative information about the time. "
+"You can set the daemon running on your system to serve time to its NTP "
+"clients even if no source of synchronized time is available. To use this "
+"feature, select the <guilabel>Use Local Time Source</guilabel> option. This "
+"option is useful only under limited and unusual circumstances."
 msgstr ""
-"JeÅ›li wÅ‚Ä…czysz zaawansowanÄ… opcjÄ™ <guilabel>WÅ‚Ä…cz rozgÅ‚aszanie NTP</"
-"guilabel>, Fedora sprÃ³buje automatycznie ustaliÄ‡ poÅ‚oÅ¼enie serwerÃ³w czasu w "
-"sieci."
 
 #. Tag: title
-#: firstboot.xml:214
+#: firstboot.xml:216
 #, no-c-format
 msgid "Hardware Profile"
 msgstr "Profil sprzÄ™tu"
 
 #. Tag: para
-#: firstboot.xml:215
+#: firstboot.xml:217
 #, fuzzy, no-c-format
 msgid ""
 "<application>Firstboot</application> displays a screen that allows you to "
@@ -8596,19 +8623,19 @@ msgstr ""
 "url=\"http://smolts.org/\"/>."
 
 #. Tag: title
-#: firstboot.xml:223
+#: firstboot.xml:225
 #, no-c-format
 msgid "<title>Firstboot hardware profile screen</title>"
 msgstr ""
 
 #. Tag: para
-#: firstboot.xml:226
+#: firstboot.xml:228
 #, no-c-format
 msgid "<para>Firstboot hardware profile screen</para>"
 msgstr ""
 
 #. Tag: para
-#: firstboot.xml:234
+#: firstboot.xml:236
 #, fuzzy, no-c-format
 msgid ""
 "To opt in to this important work, select <guilabel>Send Profile</guilabel>. "
@@ -8621,13 +8648,13 @@ msgstr ""
 "logowania."
 
 #. Tag: title
-#: firstboot.xml:241
+#: firstboot.xml:243
 #, no-c-format
 msgid "Update Your System"
 msgstr "Zaktualizuj swÃ³j system"
 
 #. Tag: para
-#: firstboot.xml:243
+#: firstboot.xml:245
 #, no-c-format
 msgid ""
 "To ensure the security of your system, run a package update after the "
@@ -8851,6 +8878,45 @@ msgid ""
 "the installation process (doing so may result in unpredictable behavior)."
 msgstr ""
 
+#. Tag: title
+#: Graphical_Installation_screenshots.xml:5
+#, fuzzy, no-c-format
+msgid "Screenshots during installation"
+msgstr "Przygotowania systemu do instalacji."
+
+#. Tag: primary
+#: Graphical_Installation_screenshots.xml:7
+#, no-c-format
+msgid "screenshots"
+msgstr ""
+
+#. Tag: secondary
+#: Graphical_Installation_screenshots.xml:8
+#, fuzzy, no-c-format
+msgid "during installation"
+msgstr "Przerywanie instalacji"
+
+#. Tag: para
+#: Graphical_Installation_screenshots.xml:10
+#, no-c-format
+msgid ""
+"<application>Anaconda</application> allows you to take screenshots during "
+"the installation process. At any time during installation, press "
+"<keycombo><keycap>Shift</keycap><keycap>Print Screen</keycap></keycombo> and "
+"<application>anaconda</application> will save a screenshot to <filename>/"
+"root/anaconda-screenshots</filename>."
+msgstr ""
+
+#. Tag: para
+#: Graphical_Installation_screenshots.xml:13
+#, no-c-format
+msgid ""
+"If you are performing a Kickstart installation, use the <option>autostep --"
+"autoscreenshot</option> option to generate a screenshot of each step of the "
+"installation automatically. Refer to <xref linkend=\"s1-kickstart2-file\"/> "
+"for details of configuring a Kickstart file."
+msgstr ""
+
 #. Tag: para
 #: Graphical_Installation_User_Interface_x86_ppc-note-Fedora.xml:3
 #, no-c-format
@@ -8890,23 +8956,6 @@ msgid ""
 "installation instructions and obtain all needed information."
 msgstr ""
 
-#. Tag: para
-#: Graphical_Installation_User_Interface_x86_ppc-note-RHEL.xml:3
-#, no-c-format
-msgid ""
-"If you are using an x86, AMD64, or <trademark class=\"registered\">Intel</"
-"trademark> 64 system, and you do not wish to use the GUI installation "
-"program, the text mode installation program is also available. To start the "
-"text mode installation program, use the following command at the "
-"<prompt>boot:</prompt> prompt:"
-msgstr ""
-
-#. Tag: para
-#: Graphical_Installation_User_Interface_x86_ppc-note-RHEL.xml:9
-#, no-c-format
-msgid "Refer to for a brief overview of text mode installation instructions."
-msgstr ""
-
 #. Tag: title
 #: Graphical_Installation_x86-common-section-1.xml:6
 #, no-c-format
@@ -9047,8 +9096,10 @@ msgstr ""
 msgid ""
 "If you have copied the Fedora ISO images to a local hard drive, you can use "
 "this method. You need a boot CD-ROM (use the <command>linux askmethod</"
-"command> boot option). Refer to <xref linkend=\"s1-begininstall-hd-x86\"/>, "
-"for hard drive installation instructions."
+"command> or <command>linux repo=hd:<replaceable>device</replaceable>:/"
+"<replaceable>path</replaceable></command> boot option). Refer to <xref "
+"linkend=\"s1-begininstall-hd-x86\"/>, for hard drive installation "
+"instructions."
 msgstr ""
 
 #. Tag: term
@@ -9069,9 +9120,11 @@ msgstr ""
 msgid ""
 "If you are installing from an NFS server using ISO images or a mirror image "
 "of Fedora, you can use this method. You need a boot CD-ROM (use the "
-"<command>linux askmethod</command> boot option). Refer to <xref linkend=\"s1-"
-"begininstall-nfs-x86\"/> for network installation instructions. Note that "
-"NFS installations may also be performed in GUI mode."
+"<command>linux askmethod</command> or <command>linux repo=nfs:"
+"<replaceable>server</replaceable> <replaceable>:options</replaceable>:/"
+"<replaceable>path</replaceable></command> boot option). Refer to <xref "
+"linkend=\"s1-begininstall-nfs-x86\"/> for network installation instructions. "
+"Note that NFS installations may also be performed in GUI mode."
 msgstr ""
 
 #. Tag: term
@@ -9092,8 +9145,12 @@ msgstr ""
 msgid ""
 "If you are installing directly from an HTTP (Web) server or FTP server, use "
 "this method. You need a boot CD-ROM (use the <command>linux askmethod</"
-"command> boot option). Refer to <xref linkend=\"s1-begininstall-url-x86\"/>, "
-"for FTP and HTTP installation instructions."
+"command>, <command>linux repo=ftp://<replaceable>user</replaceable>:"
+"<replaceable>password</replaceable>@<replaceable>host</replaceable>/"
+"<replaceable>path</replaceable></command>, or <command>linux repo=http://"
+"<replaceable>host</replaceable>/<replaceable>path</replaceable></command> "
+"boot option). Refer to <xref linkend=\"s1-begininstall-url-x86\"/>, for FTP "
+"and HTTP installation instructions."
 msgstr ""
 
 #. Tag: para
@@ -9169,151 +9226,151 @@ msgid "user interface, graphical"
 msgstr ""
 
 #. Tag: title
-#: Graphical_Installation-x86.xml:44
+#: Graphical_Installation-x86.xml:47
 #, no-c-format
 msgid "A Note about Virtual Consoles"
 msgstr ""
 
 #. Tag: primary
-#: Graphical_Installation-x86.xml:47
+#: Graphical_Installation-x86.xml:50
 #, no-c-format
 msgid "consoles, virtual"
 msgstr ""
 
 #. Tag: primary
-#: Graphical_Installation-x86.xml:51
+#: Graphical_Installation-x86.xml:54
 #, no-c-format
 msgid "<primary>virtual consoles</primary>"
 msgstr ""
 
 #. Tag: tertiary
-#: Graphical_Installation-x86.xml:57
+#: Graphical_Installation-x86.xml:60
 #, no-c-format
 msgid "<tertiary>virtual consoles</tertiary>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:82
+#: Graphical_Installation-x86.xml:85
 #, no-c-format
 msgid "console"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:86
+#: Graphical_Installation-x86.xml:89
 #, no-c-format
 msgid "keystrokes"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:90
+#: Graphical_Installation-x86.xml:93
 #, no-c-format
 msgid "contents"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:97
+#: Graphical_Installation-x86.xml:100
 #, no-c-format
 msgid "<entry>1</entry>"
 msgstr ""
 
 #. Tag: keycombo
-#: Graphical_Installation-x86.xml:102
+#: Graphical_Installation-x86.xml:105
 #, no-c-format
 msgid "<keycap>ctrl</keycap><keycap>alt</keycap><keycap>f1</keycap>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:106
+#: Graphical_Installation-x86.xml:109
 #, no-c-format
 msgid "installation dialog"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:112
+#: Graphical_Installation-x86.xml:115
 #, no-c-format
 msgid "<entry>2</entry>"
 msgstr ""
 
 #. Tag: keycombo
-#: Graphical_Installation-x86.xml:117
+#: Graphical_Installation-x86.xml:120
 #, no-c-format
 msgid "<keycap>ctrl</keycap><keycap>alt</keycap><keycap>f2</keycap>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:121
+#: Graphical_Installation-x86.xml:124
 #, no-c-format
 msgid "shell prompt"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:127
+#: Graphical_Installation-x86.xml:130
 #, no-c-format
 msgid "<entry>3</entry>"
 msgstr ""
 
 #. Tag: keycombo
-#: Graphical_Installation-x86.xml:132
+#: Graphical_Installation-x86.xml:135
 #, no-c-format
 msgid "<keycap>ctrl</keycap><keycap>alt</keycap><keycap>f3</keycap>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:136
+#: Graphical_Installation-x86.xml:139
 #, no-c-format
 msgid "install log (messages from installation program)"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:142
+#: Graphical_Installation-x86.xml:145
 #, no-c-format
 msgid "<entry>4</entry>"
 msgstr ""
 
 #. Tag: keycombo
-#: Graphical_Installation-x86.xml:147
+#: Graphical_Installation-x86.xml:150
 #, no-c-format
 msgid "<keycap>ctrl</keycap><keycap>alt</keycap><keycap>f4</keycap>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:151
+#: Graphical_Installation-x86.xml:154
 #, no-c-format
 msgid "system-related messages"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:157
+#: Graphical_Installation-x86.xml:160
 #, no-c-format
 msgid "<entry>5</entry>"
 msgstr ""
 
 #. Tag: keycombo
-#: Graphical_Installation-x86.xml:162
+#: Graphical_Installation-x86.xml:165
 #, no-c-format
 msgid "<keycap>ctrl</keycap><keycap>alt</keycap><keycap>f5</keycap>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:166
+#: Graphical_Installation-x86.xml:169
 #, no-c-format
 msgid "other messages"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:172
+#: Graphical_Installation-x86.xml:175
 #, no-c-format
 msgid "<entry>6</entry>"
 msgstr ""
 
 #. Tag: keycombo
-#: Graphical_Installation-x86.xml:177
+#: Graphical_Installation-x86.xml:180
 #, no-c-format
 msgid "<keycap>ctrl</keycap><keycap>alt</keycap><keycap>f6</keycap>"
 msgstr ""
 
 #. Tag: entry
-#: Graphical_Installation-x86.xml:181
+#: Graphical_Installation-x86.xml:184
 #, no-c-format
 msgid "graphical display"
 msgstr ""
@@ -9393,22 +9450,6 @@ msgid ""
 "media that you have created."
 msgstr ""
 
-#. Tag: primary
-#: Graphical_Installation_x86_Starting.xml:23
-#, no-c-format
-msgid "driver diskette"
-msgstr ""
-
-#. Tag: para
-#: Graphical_Installation_x86_Starting.xml:25
-#, no-c-format
-msgid ""
-"Occasionally, some hardware components require a <firstterm>driver diskette</"
-"firstterm> during the installation. A driver diskette adds support for "
-"hardware that is not otherwise supported by the installation program. Refer "
-"to <xref linkend=\"ch-driverdisk-x86\"/> for more information."
-msgstr ""
-
 #. Tag: title
 #: Graphical_Installation_x86_Starting.xml:31
 #, no-c-format
@@ -9417,6 +9458,12 @@ msgid ""
 "\"registered\">Intel</trademark> 64 Systems"
 msgstr ""
 
+#. Tag: primary
+#: Graphical_Installation_x86_Starting.xml:33
+#, fuzzy, no-c-format
+msgid "<primary>installation program</primary>"
+msgstr "metoda instalacji"
+
 #. Tag: secondary
 #: Graphical_Installation_x86_Starting.xml:34
 #, no-c-format
@@ -9426,6 +9473,24 @@ msgid ""
 msgstr ""
 
 #. Tag: tertiary
+#: Graphical_Installation_x86_Starting.xml:35
+#, no-c-format
+msgid "<tertiary>booting</tertiary>"
+msgstr ""
+
+#. Tag: primary
+#: Graphical_Installation_x86_Starting.xml:38
+#, no-c-format
+msgid "<primary>booting</primary>"
+msgstr ""
+
+#. Tag: secondary
+#: Graphical_Installation_x86_Starting.xml:39
+#, fuzzy, no-c-format
+msgid "<secondary>installation program</secondary>"
+msgstr "metoda instalacji"
+
+#. Tag: tertiary
 #: Graphical_Installation_x86_Starting.xml:40
 #, no-c-format
 msgid ""
@@ -9480,68 +9545,29 @@ msgstr ""
 #, no-c-format
 msgid ""
 "To create a boot CD-ROM or to prepare your USB pen drive for installation, "
-"refer to <xref linkend=\"s2-steps-make-cd\"/>."
+"refer to <xref linkend=\"sect-New_Users-Alternative_Boot_Methods\"/>."
 msgstr ""
 
 #. Tag: para
 #: Graphical_Installation_x86_Starting.xml:76
 #, no-c-format
-msgid ""
-"Insert the boot media and reboot the system. Your BIOS settings may need to "
-"be changed to allow you to boot from the CD-ROM or USB device."
-msgstr ""
-
-#. Tag: para
-#: Graphical_Installation_x86_Starting.xml:80
-#, no-c-format
-msgid ""
-"To change your BIOS settings on an x86, AMD64, or <trademark class="
-"\"registered\">Intel</trademark> 64 system, watch the instructions provided "
-"on your display when your computer first boots. A line of text appears, "
-"telling you which key to press to enter the BIOS settings."
-msgstr ""
-
-#. Tag: para
-#: Graphical_Installation_x86_Starting.xml:83
-#, no-c-format
-msgid ""
-"Once you have entered your BIOS setup program, find the section where you "
-"can alter your boot sequence. The default is often C, A or A, C (depending "
-"on whether you boot from your hard drive [C] or a diskette drive [A]). "
-"Change this sequence so that the CD-ROM is first in your boot order and that "
-"C or A (whichever is your typical boot default) is second. This instructs "
-"the computer to first look at the CD-ROM drive for bootable media; if it "
-"does not find bootable media on the CD-ROM drive, it then checks your hard "
-"drive or diskette drive."
-msgstr ""
-
-#. Tag: para
-#: Graphical_Installation_x86_Starting.xml:86
-#, no-c-format
-msgid ""
-"Save your changes before exiting the BIOS. For more information, refer to "
-"the documentation that came with your system."
+msgid "Insert the boot media and reboot the system."
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:90
+#: Graphical_Installation_x86_Starting.xml:84
 #, no-c-format
-msgid ""
-"After a short delay, a screen containing the <prompt>boot:</prompt> prompt "
-"should appear. The screen contains information on a variety of boot options. "
-"Each boot option also has one or more help screens associated with it. To "
-"access a help screen, press the appropriate function key as listed in the "
-"line at the bottom of the screen."
+msgid "After a short delay, a screen containing boot options appears."
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:95
+#: Graphical_Installation_x86_Starting.xml:88
 #, no-c-format
 msgid "As you boot the installation program, be aware of two issues:"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:101
+#: Graphical_Installation_x86_Starting.xml:94
 #, no-c-format
 msgid ""
 "Once the <prompt>boot:</prompt> prompt appears, the installation program "
@@ -9550,7 +9576,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:107
+#: Graphical_Installation_x86_Starting.xml:100
 #, no-c-format
 msgid ""
 "If you press a help screen function key, there is a slight delay while the "
@@ -9558,7 +9584,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:113
+#: Graphical_Installation_x86_Starting.xml:106
 #, no-c-format
 msgid ""
 "Normally, you only need to press <keycap>Enter</keycap> to boot. Be sure to "
@@ -9570,13 +9596,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Graphical_Installation_x86_Starting.xml:122
+#: Graphical_Installation_x86_Starting.xml:115
 #, no-c-format
 msgid "Additional Boot Options"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:126
+#: Graphical_Installation_x86_Starting.xml:119
 #, no-c-format
 msgid ""
 "While it is easiest to boot using a CD-ROM or DVD and perform a graphical "
@@ -9586,7 +9612,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:139
+#: Graphical_Installation_x86_Starting.xml:132
 #, no-c-format
 msgid ""
 "To pass options to the boot loader on an x86, AMD64, or <trademark class="
@@ -9595,7 +9621,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:146
+#: Graphical_Installation_x86_Starting.xml:139
 #, no-c-format
 msgid ""
 "Refer to <xref linkend=\"ap-admin-options\"/> for additional boot options "
@@ -9603,21 +9629,21 @@ msgid ""
 msgstr ""
 
 #. Tag: secondary
-#: Graphical_Installation_x86_Starting.xml:156
-#: Graphical_Installation_x86_Starting.xml:160
+#: Graphical_Installation_x86_Starting.xml:149
+#: Graphical_Installation_x86_Starting.xml:153
 #, no-c-format
 msgid "text mode"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:161
+#: Graphical_Installation_x86_Starting.xml:154
 #, no-c-format
 msgid ""
 "To perform a text mode installation, at the installation boot prompt, type:"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:180
+#: Graphical_Installation_x86_Starting.xml:173
 #, no-c-format
 msgid ""
 "ISO images have an md5sum embedded in them. To test the checksum integrity "
@@ -9625,7 +9651,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:184
+#: Graphical_Installation_x86_Starting.xml:177
 #, no-c-format
 msgid ""
 "The installation program prompts you to insert a CD or select an ISO image "
@@ -9638,36 +9664,24 @@ msgid ""
 "installation methods."
 msgstr ""
 
-#. Tag: para
-#: Graphical_Installation_x86_Starting.xml:198
-#, no-c-format
-msgid ""
-"Also in the <filename>images/</filename> directory is the <filename>boot."
-"iso</filename> file. This file is an ISO image than can be used to boot the "
-"installation program. To use the <filename>boot.iso</filename>, your "
-"computer must be able to boot from its CD-ROM drive, and its BIOS settings "
-"must be configured to do so. You must then burn the <filename>boot.iso</"
-"filename> file onto a recordable/rewriteable CD-ROM."
-msgstr ""
-
 #. Tag: secondary
-#: Graphical_Installation_x86_Starting.xml:206
-#: Graphical_Installation_x86_Starting.xml:210
-#: Graphical_Installation_x86_Starting.xml:214
-#: Graphical_Installation_x86_Starting.xml:219
+#: Graphical_Installation_x86_Starting.xml:199
+#: Graphical_Installation_x86_Starting.xml:203
+#: Graphical_Installation_x86_Starting.xml:207
+#: Graphical_Installation_x86_Starting.xml:212
 #, no-c-format
 msgid "serial mode"
 msgstr ""
 
 #. Tag: tertiary
-#: Graphical_Installation_x86_Starting.xml:215
-#: Graphical_Installation_x86_Starting.xml:220
+#: Graphical_Installation_x86_Starting.xml:208
+#: Graphical_Installation_x86_Starting.xml:213
 #, no-c-format
 msgid "UTF-8"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:221
+#: Graphical_Installation_x86_Starting.xml:214
 #, no-c-format
 msgid ""
 "If you need to perform the installation in <firstterm>serial mode</"
@@ -9675,7 +9689,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Graphical_Installation_x86_Starting.xml:224
+#: Graphical_Installation_x86_Starting.xml:217
 #, no-c-format
 msgid ""
 "<userinput>linux console=<replaceable><device></replaceable></"
@@ -9683,14 +9697,14 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:225
-#: Graphical_Installation_x86_Starting.xml:250
+#: Graphical_Installation_x86_Starting.xml:218
+#: Graphical_Installation_x86_Starting.xml:243
 #, no-c-format
 msgid "For text mode installations, use:"
 msgstr ""
 
 #. Tag: screen
-#: Graphical_Installation_x86_Starting.xml:228
+#: Graphical_Installation_x86_Starting.xml:221
 #, no-c-format
 msgid ""
 "<userinput>linux text console=<replaceable><device></replaceable></"
@@ -9698,7 +9712,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:229
+#: Graphical_Installation_x86_Starting.xml:222
 #, no-c-format
 msgid ""
 "In the above command, <replaceable><device></replaceable> should be "
@@ -9707,7 +9721,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:233
+#: Graphical_Installation_x86_Starting.xml:226
 #, no-c-format
 msgid ""
 "Text mode installations using a serial terminal work best when the terminal "
@@ -9719,19 +9733,19 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Graphical_Installation_x86_Starting.xml:236
+#: Graphical_Installation_x86_Starting.xml:229
 #, no-c-format
 msgid "<command>linux console=ttyS0 utf8</command>"
 msgstr ""
 
 #. Tag: title
-#: Graphical_Installation_x86_Starting.xml:241
+#: Graphical_Installation_x86_Starting.xml:234
 #, no-c-format
 msgid "Kernel Options"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:243
+#: Graphical_Installation_x86_Starting.xml:236
 #, no-c-format
 msgid ""
 "Options can also be passed to the kernel. For example, to apply updates for "
@@ -9739,19 +9753,19 @@ msgid ""
 msgstr ""
 
 #. Tag: primary
-#: Graphical_Installation_x86_Starting.xml:247
+#: Graphical_Installation_x86_Starting.xml:240
 #, no-c-format
 msgid "kernel options"
 msgstr ""
 
 #. Tag: screen
-#: Graphical_Installation_x86_Starting.xml:253
+#: Graphical_Installation_x86_Starting.xml:246
 #, no-c-format
 msgid "<userinput>linux text updates</userinput>"
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:254
+#: Graphical_Installation_x86_Starting.xml:247
 #, no-c-format
 msgid ""
 "This command will prompt you to insert a floppy diskette containing updates "
@@ -9761,7 +9775,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:258
+#: Graphical_Installation_x86_Starting.xml:251
 #, no-c-format
 msgid ""
 "After entering any options, press <keycap>Enter</keycap> to boot using those "
@@ -9769,7 +9783,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:262
+#: Graphical_Installation_x86_Starting.xml:255
 #, no-c-format
 msgid ""
 "If you need to specify boot options to identify your hardware, please write "
@@ -9779,7 +9793,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Graphical_Installation_x86_Starting.xml:266
+#: Graphical_Installation_x86_Starting.xml:259
 #, no-c-format
 msgid ""
 "For more information on kernel options refer to <xref linkend=\"ap-admin-"
@@ -9813,19 +9827,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:162
+#: Grub.xml:165
 #, no-c-format
 msgid "<title>GRUB</title>"
 msgstr ""
 
 #. Tag: seealso
-#: Grub.xml:169 Grub.xml:763
+#: Grub.xml:172 Grub.xml:769
 #, no-c-format
 msgid "<seealso>GRUB</seealso>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:171
+#: Grub.xml:174
 #, no-c-format
 msgid ""
 "The <firstterm>GNU GRand Unified Boot loader</firstterm> (GRUB) is a program "
@@ -9835,31 +9849,31 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:176
+#: Grub.xml:179
 #, no-c-format
 msgid "GRUB and the x86 Boot Process"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:179
+#: Grub.xml:182
 #, no-c-format
 msgid "<secondary>boot process</secondary>"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:183
+#: Grub.xml:186
 #, no-c-format
 msgid "direct loading"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:187
+#: Grub.xml:190
 #, no-c-format
 msgid "chain loading"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:189
+#: Grub.xml:192
 #, no-c-format
 msgid ""
 "This section discusses the specific role GRUB plays when booting an x86 "
@@ -9868,13 +9882,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:193
+#: Grub.xml:196
 #, no-c-format
 msgid "GRUB loads itself into memory in the following stages:"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:199
+#: Grub.xml:202
 #, no-c-format
 msgid ""
 "<emphasis>The Stage 1 or primary boot loader is read into memory by the BIOS "
@@ -9886,7 +9900,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:209
+#: Grub.xml:212
 #, no-c-format
 msgid ""
 "<emphasis>The Stage 1.5 boot loader is read into memory by the Stage 1 boot "
@@ -9899,7 +9913,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:217
+#: Grub.xml:220
 #, no-c-format
 msgid ""
 "<emphasis>The Stage 2 or secondary boot loader is read into memory.</"
@@ -9910,7 +9924,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:224
+#: Grub.xml:227
 #, no-c-format
 msgid ""
 "<emphasis>The secondary boot loader reads the operating system or kernel as "
@@ -9921,7 +9935,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:231
+#: Grub.xml:234
 #, no-c-format
 msgid ""
 "The method used to boot Linux is called <firstterm>direct loading</"
@@ -9930,7 +9944,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:235
+#: Grub.xml:238
 #, no-c-format
 msgid ""
 "The boot process used by other operating systems may differ. For example, "
@@ -9943,7 +9957,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:240
+#: Grub.xml:243
 #, no-c-format
 msgid ""
 "GRUB supports both direct and chain loading boot methods, allowing it to "
@@ -9951,7 +9965,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:247
+#: Grub.xml:250
 #, no-c-format
 msgid ""
 "During installation, Microsoft's DOS and Windows installation programs "
@@ -9961,19 +9975,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:254
+#: Grub.xml:257
 #, no-c-format
 msgid "Features of GRUB"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:257
+#: Grub.xml:260
 #, no-c-format
 msgid "features"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:259
+#: Grub.xml:262
 #, no-c-format
 msgid ""
 "GRUB contains several features that make it preferable to other boot loaders "
@@ -9982,7 +9996,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:265
+#: Grub.xml:268
 #, no-c-format
 msgid ""
 "<emphasis>GRUB provides a true command-based, pre-OS environment on x86 "
@@ -9993,7 +10007,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:272
+#: Grub.xml:275
 #, no-c-format
 msgid ""
 "<emphasis>GRUB supports <firstterm>Logical Block Addressing (LBA)</"
@@ -10007,7 +10021,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:280
+#: Grub.xml:283
 #, no-c-format
 msgid ""
 "<emphasis>GRUB can read ext2 partitions.</emphasis> This functionality "
@@ -10021,7 +10035,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:295
+#: Grub.xml:298
 #, no-c-format
 msgid ""
 "If GRUB was not installed during the installation process, it can be "
@@ -10030,7 +10044,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:299
+#: Grub.xml:302
 #, no-c-format
 msgid ""
 "Before installing GRUB, make sure to use the latest GRUB package available "
@@ -10038,7 +10052,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:304
+#: Grub.xml:307
 #, no-c-format
 msgid ""
 "Once the GRUB package is installed, open a root shell prompt and run the "
@@ -10050,13 +10064,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:308
+#: Grub.xml:311
 #, no-c-format
 msgid "<command>/sbin/grub-install /dev/hda</command>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:309
+#: Grub.xml:312
 #, no-c-format
 msgid ""
 "The next time the system boots, the GRUB graphical boot loader menu appears "
@@ -10064,33 +10078,43 @@ msgid ""
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:317
+#: Grub.xml:320
 #, no-c-format
 msgid "system unbootable after disk failure"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:320
+#: Grub.xml:323
 #, no-c-format
 msgid ""
 "If GRUB is installed on a RAID 1 array, the system may become unbootable in "
 "the event of disk failure."
 msgstr ""
 
-#. Tag: title
+#. Tag: para
 #: Grub.xml:330
 #, no-c-format
+msgid ""
+"Installing GRUB on each disk in the array might ensure that your system can "
+"boot from any of the disks individually if the array itself is inaccessible. "
+"Refer to <ulink url=\"http://tldp.org/HOWTO/Software-RAID-HOWTO-7.html#ss7.3"
+"\"></ulink> for an explanation and example of this strategy."
+msgstr ""
+
+#. Tag: title
+#: Grub.xml:336
+#, no-c-format
 msgid "GRUB Terminology"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:333 Grub.xml:343 Grub.xml:412 Grub.xml:460
+#: Grub.xml:339 Grub.xml:349 Grub.xml:418 Grub.xml:466
 #, no-c-format
 msgid "terminology"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:335
+#: Grub.xml:341
 #, no-c-format
 msgid ""
 "One of the most important things to understand before using GRUB is how the "
@@ -10100,19 +10124,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:340
+#: Grub.xml:346
 #, no-c-format
 msgid "Device Names"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:344
+#: Grub.xml:350
 #, no-c-format
 msgid "devices"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:346
+#: Grub.xml:352
 #, no-c-format
 msgid ""
 "When referring to a specific device with GRUB, do so using the following "
@@ -10121,7 +10145,7 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Grub.xml:351
+#: Grub.xml:357
 #, no-c-format
 msgid ""
 "(<replaceable><type-of-device><bios-device-number></replaceable>,"
@@ -10129,7 +10153,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:354
+#: Grub.xml:360
 #, no-c-format
 msgid ""
 "The <replaceable><type-of-device></replaceable> specifies the type of "
@@ -10142,7 +10166,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:360
+#: Grub.xml:366
 #, no-c-format
 msgid ""
 "The <replaceable><bios-device-number></replaceable> is the BIOS device "
@@ -10156,7 +10180,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:366
+#: Grub.xml:372
 #, no-c-format
 msgid ""
 "The <replaceable><partition-number></replaceable> specifies the number "
@@ -10168,7 +10192,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:372
+#: Grub.xml:378
 #, no-c-format
 msgid ""
 "The numbering system for devices under GRUB always begins with <command>0</"
@@ -10177,7 +10201,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:376
+#: Grub.xml:382
 #, no-c-format
 msgid ""
 "To give an example, if a system has more than one hard drive, GRUB refers to "
@@ -10188,7 +10212,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:381
+#: Grub.xml:387
 #, no-c-format
 msgid ""
 "In general the following rules apply when naming devices and partitions "
@@ -10196,7 +10220,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:387
+#: Grub.xml:393
 #, no-c-format
 msgid ""
 "It does not matter if system hard drives are IDE or SCSI, all hard drives "
@@ -10205,7 +10229,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:393
+#: Grub.xml:399
 #, no-c-format
 msgid ""
 "To specify an entire device without respect to partitions, leave off the "
@@ -10216,7 +10240,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:400
+#: Grub.xml:406
 #, no-c-format
 msgid ""
 "If a system has multiple drive devices, it is very important to know how the "
@@ -10226,19 +10250,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:409
+#: Grub.xml:415
 #, no-c-format
 msgid "File Names and Blocklists"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:413
+#: Grub.xml:419
 #, no-c-format
 msgid "files"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:415
+#: Grub.xml:421
 #, no-c-format
 msgid ""
 "When typing commands to GRUB that reference a file, such as a menu list, it "
@@ -10247,13 +10271,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:419
+#: Grub.xml:425
 #, no-c-format
 msgid "The following illustrates the structure of such a command:"
 msgstr ""
 
 #. Tag: command
-#: Grub.xml:424
+#: Grub.xml:430
 #, no-c-format
 msgid ""
 "(<replaceable><device-type><device-number></replaceable>,"
@@ -10262,7 +10286,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:427
+#: Grub.xml:433
 #, no-c-format
 msgid ""
 "In this example, replace <replaceable><device-type></replaceable> with "
@@ -10273,7 +10297,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:431
+#: Grub.xml:437
 #, no-c-format
 msgid ""
 "It is also possible to specify files to GRUB that do not actually appear in "
@@ -10288,19 +10312,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:437
+#: Grub.xml:443
 #, no-c-format
 msgid "The following is a sample blocklist:"
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:440
+#: Grub.xml:446
 #, no-c-format
 msgid "<command>0+50,100+25,200+1</command>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:441
+#: Grub.xml:447
 #, no-c-format
 msgid ""
 "This sample blocklist specifies a file that starts at the first block on the "
@@ -10308,7 +10332,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:445
+#: Grub.xml:451
 #, no-c-format
 msgid ""
 "Knowing how to write blocklists is useful when using GRUB to load operating "
@@ -10319,13 +10343,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:449
+#: Grub.xml:455
 #, no-c-format
 msgid "<command>(hd0,0)+1</command>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:450
+#: Grub.xml:456
 #, no-c-format
 msgid ""
 "The following shows the <command>chainloader</command> command with a "
@@ -10334,25 +10358,25 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:453 Grub.xml:632
+#: Grub.xml:459 Grub.xml:638
 #, no-c-format
 msgid "<command>chainloader +1</command>"
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:457
+#: Grub.xml:463
 #, no-c-format
 msgid "The Root File System and GRUB"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:461
+#: Grub.xml:467
 #, no-c-format
 msgid "root file system"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:463
+#: Grub.xml:469
 #, no-c-format
 msgid ""
 "The use of the term <emphasis>root file system</emphasis> has a different "
@@ -10361,7 +10385,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:467
+#: Grub.xml:473
 #, no-c-format
 msgid ""
 "The GRUB root file system is the top level of the specified device. For "
@@ -10372,7 +10396,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:472
+#: Grub.xml:478
 #, no-c-format
 msgid ""
 "Next, the <command>kernel</command> command is executed with the location of "
@@ -10383,7 +10407,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:477
+#: Grub.xml:483
 #, no-c-format
 msgid ""
 "Refer to the <command>root</command> and <command>kernel</command> commands "
@@ -10391,55 +10415,55 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:483
+#: Grub.xml:489
 #, no-c-format
 msgid "GRUB Interfaces"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:486 Grub.xml:490 Grub.xml:495 Grub.xml:508 Grub.xml:584
+#: Grub.xml:492 Grub.xml:496 Grub.xml:501 Grub.xml:514 Grub.xml:590
 #, no-c-format
 msgid "interfaces"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:491
+#: Grub.xml:497
 #, no-c-format
 msgid "menu"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:496
+#: Grub.xml:502
 #, no-c-format
 msgid "menu entry editor"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:500
+#: Grub.xml:506
 #, no-c-format
 msgid "changing runlevels with"
 msgstr ""
 
 #. Tag: primary
-#: Grub.xml:503
+#: Grub.xml:509
 #, no-c-format
 msgid "runlevels"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:504
+#: Grub.xml:510
 #, no-c-format
 msgid "changing with GRUB"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:509
+#: Grub.xml:515
 #, no-c-format
 msgid "command line"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:511
+#: Grub.xml:517
 #, no-c-format
 msgid ""
 "GRUB features three interfaces which provide different levels of "
@@ -10448,13 +10472,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:515
+#: Grub.xml:521
 #, no-c-format
 msgid "The interfaces are as follows:"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:522
+#: Grub.xml:528
 #, no-c-format
 msgid ""
 "The following GRUB interfaces can only be accessed by pressing any key "
@@ -10462,13 +10486,13 @@ msgid ""
 msgstr ""
 
 #. Tag: emphasis
-#: Grub.xml:529
+#: Grub.xml:535
 #, no-c-format
 msgid "Menu Interface"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:531
+#: Grub.xml:537
 #, no-c-format
 msgid ""
 "This is the default interface shown when GRUB is configured by the "
@@ -10480,7 +10504,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:535
+#: Grub.xml:541
 #, no-c-format
 msgid ""
 "Press the <keycap>e</keycap> key to enter the entry editor interface or the "
@@ -10488,7 +10512,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:539
+#: Grub.xml:545
 #, no-c-format
 msgid ""
 "Refer to <xref linkend=\"s1-grub-configfile\"/> for more information on "
@@ -10496,13 +10520,13 @@ msgid ""
 msgstr ""
 
 #. Tag: emphasis
-#: Grub.xml:546
+#: Grub.xml:552
 #, no-c-format
 msgid "Menu Entry Editor Interface"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:548
+#: Grub.xml:554
 #, no-c-format
 msgid ""
 "To access the menu entry editor, press the <keycap>e</keycap> key from the "
@@ -10514,7 +10538,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:554
+#: Grub.xml:560
 #, no-c-format
 msgid ""
 "After all changes are made, the <keycap>b</keycap> key executes the commands "
@@ -10524,7 +10548,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:559
+#: Grub.xml:565
 #, no-c-format
 msgid ""
 "For information about changing runlevels using the GRUB menu entry editor, "
@@ -10532,13 +10556,13 @@ msgid ""
 msgstr ""
 
 #. Tag: emphasis
-#: Grub.xml:567
+#: Grub.xml:573
 #, no-c-format
 msgid "Command Line Interface"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:569
+#: Grub.xml:575
 #, no-c-format
 msgid ""
 "The command line interface is the most basic GRUB interface, but it is also "
@@ -10555,26 +10579,26 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:573
+#: Grub.xml:579
 #, no-c-format
 msgid ""
 "Refer to <xref linkend=\"s1-grub-commands\"/> for a list of common commands."
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:581
+#: Grub.xml:587
 #, no-c-format
 msgid "Interfaces Load Order"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:585
+#: Grub.xml:591
 #, no-c-format
 msgid "order of"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:587
+#: Grub.xml:593
 #, no-c-format
 msgid ""
 "When GRUB loads its second stage boot loader, it first searches for its "
@@ -10585,7 +10609,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:592
+#: Grub.xml:598
 #, no-c-format
 msgid ""
 "If the configuration file cannot be found, or if the configuration file is "
@@ -10594,7 +10618,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:596
+#: Grub.xml:602
 #, no-c-format
 msgid ""
 "If the configuration file is not valid, GRUB prints out the error and asks "
@@ -10606,19 +10630,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:603
+#: Grub.xml:609
 #, no-c-format
 msgid "GRUB Commands"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:606
+#: Grub.xml:612
 #, no-c-format
 msgid "commands"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:608
+#: Grub.xml:614
 #, no-c-format
 msgid ""
 "GRUB allows a number of useful commands in its command line interface. Some "
@@ -10628,13 +10652,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:612
+#: Grub.xml:618
 #, no-c-format
 msgid "The following is a list of useful commands:"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:618
+#: Grub.xml:624
 #, no-c-format
 msgid ""
 "<command>boot</command> — Boots the operating system or chain loader "
@@ -10642,7 +10666,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:624
+#: Grub.xml:630
 #, no-c-format
 msgid ""
 "<command>chainloader <replaceable></path/to/file></replaceable></"
@@ -10652,13 +10676,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:629
+#: Grub.xml:635
 #, no-c-format
 msgid "The following is an example <command>chainloader</command> command:"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:636
+#: Grub.xml:642
 #, no-c-format
 msgid ""
 "<command>displaymem</command> — Displays the current use of memory, "
@@ -10667,7 +10691,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:642
+#: Grub.xml:648
 #, no-c-format
 msgid ""
 "<command>initrd <replaceable></path/to/initrd></replaceable></command> "
@@ -10678,19 +10702,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:647
+#: Grub.xml:653
 #, no-c-format
 msgid "The following is an example <command>initrd</command> command:"
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:650
+#: Grub.xml:656
 #, no-c-format
 msgid "<command>initrd /initrd-2.6.8-1.523.img</command>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:654
+#: Grub.xml:660
 #, no-c-format
 msgid ""
 "<command>install <replaceable><stage-1></replaceable> <replaceable><"
@@ -10700,7 +10724,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:661
+#: Grub.xml:667
 #, no-c-format
 msgid ""
 "<command><replaceable><stage-1></replaceable></command> — "
@@ -10709,7 +10733,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:667
+#: Grub.xml:673
 #, no-c-format
 msgid ""
 "<command><replaceable><install-disk></replaceable></command> — "
@@ -10718,7 +10742,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:673
+#: Grub.xml:679
 #, no-c-format
 msgid ""
 "<command><replaceable><stage-2></replaceable></command> — Passes "
@@ -10727,7 +10751,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:679
+#: Grub.xml:685
 #, no-c-format
 msgid ""
 "<option>p</option> <command><replaceable><config-file></replaceable></"
@@ -10738,7 +10762,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:689
+#: Grub.xml:695
 #, no-c-format
 msgid ""
 "The <command>install</command> command overwrites any information already "
@@ -10746,7 +10770,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:696
+#: Grub.xml:702
 #, no-c-format
 msgid ""
 "<command>kernel <replaceable></path/to/kernel></replaceable> "
@@ -10762,13 +10786,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:702
+#: Grub.xml:708
 #, no-c-format
 msgid "The following is an example <command>kernel</command> command:"
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:705
+#: Grub.xml:711
 #, no-c-format
 msgid ""
 "<command>kernel /vmlinuz-2.6.8-1.523 ro root=/dev/VolGroup00/LogVol00</"
@@ -10776,7 +10800,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:706
+#: Grub.xml:712
 #, no-c-format
 msgid ""
 "The option in the previous example specifies that the root file system for "
@@ -10784,7 +10808,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:712 Grub.xml:872
+#: Grub.xml:718 Grub.xml:907
 #, no-c-format
 msgid ""
 "<command>root (<replaceable><device-type></"
@@ -10795,19 +10819,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:717
+#: Grub.xml:723
 #, no-c-format
 msgid "The following is an example <command>root</command> command:"
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:720
+#: Grub.xml:726
 #, no-c-format
 msgid "<command>root (hd0,0)</command>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:724 Grub.xml:879
+#: Grub.xml:730 Grub.xml:914
 #, no-c-format
 msgid ""
 "<command>rootnoverify (<replaceable><device-type></"
@@ -10818,7 +10842,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:731
+#: Grub.xml:737
 #, no-c-format
 msgid ""
 "Other commands are also available; type <command>help --all</command> for a "
@@ -10828,19 +10852,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:737
+#: Grub.xml:743
 #, no-c-format
 msgid "GRUB Menu Configuration File"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:740 Grub.xml:800
+#: Grub.xml:746 Grub.xml:806
 #, no-c-format
 msgid "menu configuration file"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:742
+#: Grub.xml:748
 #, no-c-format
 msgid ""
 "The configuration file (<filename>/boot/grub/grub.conf</filename>), which is "
@@ -10852,37 +10876,37 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:748
+#: Grub.xml:754
 #, no-c-format
 msgid "Configuration File Structure"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:751 Grub.xml:756
+#: Grub.xml:757 Grub.xml:762
 #, no-c-format
 msgid "configuration file"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:752
+#: Grub.xml:758
 #, no-c-format
 msgid "structure"
 msgstr ""
 
 #. Tag: filename
-#: Grub.xml:757
+#: Grub.xml:763
 #, no-c-format
 msgid "/boot/grub/grub.conf"
 msgstr ""
 
 #. Tag: filename
-#: Grub.xml:761
+#: Grub.xml:767
 #, no-c-format
 msgid "grub.conf"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:765
+#: Grub.xml:771
 #, no-c-format
 msgid ""
 "The GRUB menu interface configuration file is <filename>/boot/grub/grub."
@@ -10892,7 +10916,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:770
+#: Grub.xml:776
 #, no-c-format
 msgid ""
 "The following is a very basic GRUB menu configuration file designed to boot "
@@ -10900,7 +10924,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:775
+#: Grub.xml:781
 #, no-c-format
 msgid ""
 "default=0 \n"
@@ -10920,7 +10944,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:777
+#: Grub.xml:783
 #, no-c-format
 msgid ""
 "This file configures GRUB to build a menu with Fedora as the default "
@@ -10930,7 +10954,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:785
+#: Grub.xml:791
 #, no-c-format
 msgid ""
 "Note that the default is specified as an integer. This refers to the first "
@@ -10941,7 +10965,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:791
+#: Grub.xml:797
 #, no-c-format
 msgid ""
 "Configuring a GRUB menu configuration file to boot multiple operating "
@@ -10950,19 +10974,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:797
+#: Grub.xml:803
 #, no-c-format
 msgid "Configuration File Directives"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:801
+#: Grub.xml:807
 #, no-c-format
 msgid "directives"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:803
+#: Grub.xml:809
 #, no-c-format
 msgid ""
 "The following are directives commonly used in the GRUB menu configuration "
@@ -10970,7 +10994,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:809
+#: Grub.xml:815
 #, no-c-format
 msgid ""
 "<command>chainloader <replaceable></path/to/file></replaceable></"
@@ -10981,7 +11005,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:816
+#: Grub.xml:822
 #, no-c-format
 msgid ""
 "<command>color <replaceable><normal-color></replaceable> "
@@ -10992,13 +11016,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:820
+#: Grub.xml:826
 #, no-c-format
 msgid "<command>color red/black green/blue</command>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:824
+#: Grub.xml:830
 #, no-c-format
 msgid ""
 "<command>default=<replaceable><integer></replaceable></command> "
@@ -11007,7 +11031,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:830
+#: Grub.xml:836
 #, no-c-format
 msgid ""
 "<command>fallback=<replaceable><integer></replaceable></command> "
@@ -11016,7 +11040,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:836
+#: Grub.xml:842
 #, no-c-format
 msgid ""
 "<command>hiddenmenu</command> — Prevents the GRUB menu interface from "
@@ -11026,7 +11050,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:843
+#: Grub.xml:849
 #, no-c-format
 msgid ""
 "<command>initrd <replaceable></path/to/initrd></replaceable></command> "
@@ -11036,7 +11060,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:850
+#: Grub.xml:856
 #, no-c-format
 msgid ""
 "<command>kernel <replaceable></path/to/kernel></replaceable> "
@@ -11048,7 +11072,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:857
+#: Grub.xml:860
+#, no-c-format
+msgid "These options include:"
+msgstr ""
+
+#. Tag: para
+#: Grub.xml:864
+#, no-c-format
+msgid ""
+"<literal>rhgb</literal> (<firstterm>Red Hat graphical boot</firstterm>) "
+"— displays an animation during the boot process, rather than lines of "
+"text."
+msgstr ""
+
+#. Tag: para
+#: Grub.xml:869
+#, no-c-format
+msgid ""
+"<literal>quiet</literal> — suppresses all but the most important "
+"messages in the part of the boot sequence before the Red Hat graphical boot "
+"animation begins."
+msgstr ""
+
+#. Tag: para
+#: Grub.xml:878
 #, no-c-format
 msgid ""
 "<command>password=<replaceable><password></replaceable></command> "
@@ -11057,7 +11105,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:861
+#: Grub.xml:882
 #, no-c-format
 msgid ""
 "Optionally, it is possible to specify an alternate menu configuration file "
@@ -11069,7 +11117,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:866
+#: Grub.xml:887
 #, no-c-format
 msgid ""
 "For more information about securing GRUB, refer to the chapter titled "
@@ -11078,7 +11126,54 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:886
+#: Grub.xml:893
+#, no-c-format
+msgid ""
+"<command>map</command> — Swaps the numbers assigned to two hard "
+"drives. For example:"
+msgstr ""
+
+#. Tag: screen
+#: Grub.xml:896
+#, no-c-format
+msgid ""
+"map (hd0) (hd3)\n"
+"map (hd3) (hd0)"
+msgstr ""
+
+#. Tag: para
+#: Grub.xml:897
+#, no-c-format
+msgid ""
+"assigns the number <literal>0</literal> to the fourth hard drive, and the "
+"number <literal>3</literal> to the first hard drive. This option is "
+"especially useful if you configure your system with an option to boot a "
+"Windows operating system, becausehe Windows boot loader must find the "
+"Windows installation on the first hard drive."
+msgstr ""
+
+#. Tag: para
+#: Grub.xml:900
+#, no-c-format
+msgid ""
+"For example, if your Windows installation is on the fourth hard drive, the "
+"following entry in <filename>grub.conf</filename> will allow the Windows "
+"boot loader to load Windows correctly:"
+msgstr ""
+
+#. Tag: screen
+#: Grub.xml:903
+#, no-c-format
+msgid ""
+"title Windows\n"
+"map (hd0) (hd3)\n"
+"map (hd3) (hd0)\n"
+"rootnoverify (hd3,0)\n"
+"chainloader +1"
+msgstr ""
+
+#. Tag: para
+#: Grub.xml:921
 #, no-c-format
 msgid ""
 "<command>timeout=<replaceable><integer></replaceable></command> "
@@ -11087,7 +11182,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:892
+#: Grub.xml:927
 #, no-c-format
 msgid ""
 "<command>splashimage=<replaceable><path-to-image></replaceable></"
@@ -11096,7 +11191,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:898
+#: Grub.xml:933
 #, no-c-format
 msgid ""
 "<command>title <replaceable>group-title</replaceable></command> — "
@@ -11105,7 +11200,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:904
+#: Grub.xml:939
 #, no-c-format
 msgid ""
 "To add human-readable comments to the menu configuration file, begin the "
@@ -11113,26 +11208,26 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:910
+#: Grub.xml:945
 #, no-c-format
 msgid "<title>Changing Runlevels at Boot Time</title>"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:913
+#: Grub.xml:948
 #, no-c-format
 msgid "<secondary>Changing Runlevels at Boot Time</secondary>"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:915
+#: Grub.xml:950
 #, no-c-format
 msgid ""
 "Under Fedora, it is possible to change the default runlevel at boot time."
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:919
+#: Grub.xml:954
 #, no-c-format
 msgid ""
 "To change the runlevel of a single boot session, use the following "
@@ -11140,7 +11235,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:925
+#: Grub.xml:960
 #, no-c-format
 msgid ""
 "When the GRUB menu bypass screen appears at boot time, press any key to "
@@ -11148,7 +11243,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:931
+#: Grub.xml:966
 #, no-c-format
 msgid ""
 "Press the <keycap>a</keycap> key to append to the <command>kernel</command> "
@@ -11156,7 +11251,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:937
+#: Grub.xml:972
 #, no-c-format
 msgid ""
 "Add <command><space><replaceable><runlevel></replaceable></"
@@ -11166,7 +11261,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Grub.xml:940
+#: Grub.xml:975
 #, no-c-format
 msgid ""
 "<command>grub append> ro root=/dev/VolGroup00/LogVol00 rhgb quiet 3</"
@@ -11174,19 +11269,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:945
+#: Grub.xml:980
 #, no-c-format
 msgid "Additional Resources"
 msgstr ""
 
 #. Tag: secondary
-#: Grub.xml:948 Grub.xml:958 Grub.xml:980 Grub.xml:1010
+#: Grub.xml:983 Grub.xml:993 Grub.xml:1015 Grub.xml:1045
 #, no-c-format
 msgid "additional resources"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:950
+#: Grub.xml:985
 #, no-c-format
 msgid ""
 "This chapter is only intended as an introduction to GRUB. Consult the "
@@ -11194,19 +11289,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:955
+#: Grub.xml:990
 #, no-c-format
 msgid "Installed Documentation"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:959
+#: Grub.xml:994
 #, no-c-format
 msgid "installed documentation"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:963
+#: Grub.xml:998
 #, no-c-format
 msgid ""
 "<filename>/usr/share/doc/grub-<replaceable><version-number></"
@@ -11216,7 +11311,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:969
+#: Grub.xml:1004
 #, no-c-format
 msgid ""
 "<command>info grub</command> — The GRUB info page contains a tutorial, "
@@ -11225,19 +11320,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:977
+#: Grub.xml:1012
 #, no-c-format
 msgid "Useful Websites"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:981
+#: Grub.xml:1016
 #, no-c-format
 msgid "useful websites"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:985
+#: Grub.xml:1020
 #, no-c-format
 msgid ""
 "<ulink url=\"http://www.gnu.org/software/grub\">http://www.gnu.org/software/"
@@ -11246,7 +11341,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:991
+#: Grub.xml:1026
 #, no-c-format
 msgid ""
 "<ulink url=\"http://kbase.redhat.com/faq/docs/DOC-6864\">http://kbase.redhat."
@@ -11255,19 +11350,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Grub.xml:1007
+#: Grub.xml:1042
 #, no-c-format
 msgid "Related Books"
 msgstr ""
 
 #. Tag: tertiary
-#: Grub.xml:1011
+#: Grub.xml:1046
 #, no-c-format
 msgid "related books"
 msgstr ""
 
 #. Tag: para
-#: Grub.xml:1015
+#: Grub.xml:1050
 #, no-c-format
 msgid ""
 "<citetitle>Red Hat Enterprise Linux Deployment Guide</citetitle>; Red Hat, "
@@ -11275,241 +11370,17 @@ msgid ""
 "explains, in a concise manner, how to secure the GRUB boot loader."
 msgstr ""
 
-#. Tag: emphasis
-#: IA64_Additional_Boot_Options-para-1.xml:6
-#, no-c-format
-msgid "For Itanium users:"
-msgstr ""
-
-#. Tag: para
-#: IA64_Additional_Boot_Options-para-2.xml:5
-#, no-c-format
-msgid ""
-"To pass options to the boot loader on an Itanium system, enter the following "
-"at the EFI Shell prompt:"
-msgstr ""
-
-#. Tag: emphasis
-#: IA64_Additional_Boot_Options-para-3.xml:6
-#, no-c-format
-msgid ""
-"For x86, AMD64, and <trademark class=\"registered\">Intel</trademark> 64 "
-"users:"
-msgstr ""
-
-#. Tag: screen
-#: IA64_Additional_Boot_Options-screen-1.xml:5
-#, no-c-format
-msgid "<command>elilo linux <replaceable>option</replaceable></command>"
-msgstr ""
-
-#. Tag: title
-#: IA64_Starting.xml:6
-#, no-c-format
-msgid "Booting the Installation Program on Itanium Systems"
-msgstr ""
-
-#. Tag: secondary
-#: IA64_Starting.xml:9
-#, no-c-format
-msgid "<secondary>Itanium</secondary>"
-msgstr ""
-
-#. Tag: tertiary
-#: IA64_Starting.xml:15
-#, no-c-format
-msgid "<tertiary>Itanium</tertiary>"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:17
-#, no-c-format
-msgid ""
-"Your Itanium system should be able to boot the &PROD; installation program "
-"directly from the &PROD; CD #1. If your Itanium cannot boot the installation "
-"program from the CD-ROM (or if you want to perform a hard drive, NFS, FTP, "
-"or HTTP installation) you must boot from an LS-120 diskette. Refer to <xref "
-"linkend=\"s3-ia64-intro-boot-from-ls-120\"/> for more information."
-msgstr ""
-
-#. Tag: title
-#: IA64_Starting.xml:22
-#, no-c-format
-msgid "Booting the Installation Program from the DVD/CD-ROM"
-msgstr ""
-
-#. Tag: tertiary
-#: IA64_Starting.xml:26
-#, no-c-format
-msgid "from a CD-ROM"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:28
-#, no-c-format
-msgid "To boot from the &PROD; CD #1 follow these steps:"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:34
-#, no-c-format
-msgid "Remove all media except &PROD; CD #1."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:40 IA64_Starting.xml:112
-#, no-c-format
-msgid ""
-"From the <guimenu>Boot Option</guimenu> menu choose <guimenuitem>EFI Shell</"
-"guimenuitem>."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:46
-#, no-c-format
-msgid ""
-"At the <prompt>Shell></prompt> prompt, change to the file system on the "
-"CD-ROM. For example, in the above sample <command>map</command> output, the "
-"system partition on the CD-ROM is <filename>fs1</filename>. To change to the "
-"<filename>fs1</filename> file system, type <command>fs1:</command> at the "
-"prompt."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:52 IA64_Starting.xml:126
-#, no-c-format
-msgid ""
-"Type <command>elilo linux</command> to boot into the installation program."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:58 IA64_Starting.xml:132
-#, no-c-format
-msgid "Go to <xref linkend=\"ch-guimode-x86\"/> to begin the installation."
-msgstr ""
-
-#. Tag: title
-#: IA64_Starting.xml:66
-#, no-c-format
-msgid "Booting the Installation Program from an LS-120 Diskette"
-msgstr ""
-
-#. Tag: tertiary
-#: IA64_Starting.xml:70
-#, no-c-format
-msgid "from an LS-120 diskette"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:72
-#, no-c-format
-msgid ""
-"If your Itanium cannot boot from &PROD; CD #1, you must boot from an LS-120 "
-"diskette. If you want to perform a hard drive, NFS, FTP, or HTTP "
-"installation, you must boot from a boot LS-120 diskette."
-msgstr ""
-
-#. Tag: primary
-#: IA64_Starting.xml:76
-#, no-c-format
-msgid "LS-120 boot diskette"
-msgstr ""
-
-#. Tag: secondary
-#: IA64_Starting.xml:77
-#, no-c-format
-msgid "creating from boot image file"
-msgstr ""
-
-#. Tag: primary
-#: IA64_Starting.xml:80
-#, no-c-format
-msgid "LS-120 <filename>boot.img</filename>"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:83
-#, no-c-format
-msgid ""
-"You must create an LS-120 boot image file diskette from the boot image file "
-"on CD #1: <filename>images/boot.img</filename>. To create this diskette in "
-"Linux, insert a blank LS-120 diskette and type the following command at a "
-"shell prompt:"
-msgstr ""
-
-#. Tag: screen
-#: IA64_Starting.xml:87
-#, no-c-format
-msgid ""
-"<userinput>dd if=<replaceable>boot.img</replaceable> of=/dev/hda bs=180k</"
-"userinput>"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:88
-#, no-c-format
-msgid ""
-"Replace <replaceable>boot.img</replaceable> with the full path to the boot "
-"image file and <userinput>/dev/hda</userinput> with the correct device name "
-"for the LS-120 diskette drive."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:92
-#, no-c-format
-msgid ""
-"If you are not using the &PROD; CD, the installation program starts in text "
-"mode and you must choose a few basic options for your system."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:96
-#, no-c-format
-msgid ""
-"If you are using the CD-ROM to load the installation program, follow the "
-"instructions contained in <xref linkend=\"ch-guimode-x86\"/>."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:100
-#, no-c-format
-msgid "To boot from an LS-120 diskette follow these steps:"
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:106
-#, no-c-format
-msgid ""
-"Insert the LS-120 diskette you made from the boot image file <filename>boot."
-"img</filename>. If you are performing a local CD-ROM installation but "
-"booting off the LS-120 diskette, insert the &PROD; CD #1 also. If you are "
-"performing a hard drive, NFS, FTP, or HTTP installation, you do not need the "
-"CD-ROM."
-msgstr ""
-
-#. Tag: para
-#: IA64_Starting.xml:118
-#, no-c-format
-msgid ""
-"At the <prompt>Shell></prompt> prompt, change the device to the LS-120 "
-"drive by typing the command <command>fs0:</command>, using the example "
-"<command>map</command> output above."
-msgstr ""
-
 #. Tag: para
-#: IA64_starting-text-mode.xml:10
+#: Grub.xml:1053
 #, no-c-format
 msgid ""
-"If you are using an Itanium system, and you do not wish to use the GUI "
-"installation program, the text mode installation program is also available. "
-"To start the text mode installation program, type the following command at "
-"the EFI Shell prompt:"
-msgstr ""
-
-#. Tag: screen
-#: IA64_starting-text-mode.xml:13
-#, no-c-format
-msgid "<command>elilo linux text</command>"
+"You can find the current version of the <citetitle>Red Hat Enterprise Linux "
+"Deployment Guide</citetitle> at <ulink url=\"http://www.redhat.com/docs/"
+"manuals/enterprise/\"></ulink>. In the version of the book for Red Hat "
+"Enterprise Linux 5, the relevant section is <citetitle>43.1.2. BIOS and Boot "
+"Loader Security</citetitle>: <ulink url=\" http://www.redhat.com/docs/en-US/"
+"Red_Hat_Enterprise_Linux/5/html/Deployment_Guide/ch-sec-network.html#s1-"
+"wstation-boot-sec\"></ulink>."
 msgstr ""
 
 #. Tag: primary
@@ -11547,7 +11418,8 @@ msgid ""
 "installation program asks to initialize the hard disk. This operation makes "
 "any existing data on the hard disk unreadable. If your system has a brand "
 "new hard disk with no operating system installed, or you have removed all "
-"partitions on the hard disk, answer <guilabel>Yes</guilabel>."
+"partitions on the hard disk, click <guibutton>Re-initialize drive</"
+"guibutton>."
 msgstr ""
 
 #. Tag: para
@@ -11561,6 +11433,12 @@ msgid ""
 msgstr ""
 
 #. Tag: title
+#: Initializing_Hard_Disk_common-title.xml:5
+#, no-c-format
+msgid "Initializing the Hard Disk"
+msgstr ""
+
+#. Tag: title
 #: Initializing_Hard_Disk-x86.xml:17
 #, no-c-format
 msgid "Warning screen – initializing hard drive"
@@ -11609,12 +11487,6 @@ msgstr ""
 msgid "preparing to install Fedora over a network."
 msgstr ""
 
-#. Tag: para
-#: Installation_Guide.xml:34
-#, no-c-format
-msgid "preparing driver media."
-msgstr ""
-
 #. Tag: title
 #: Installation_Guide.xml:45
 #, no-c-format
@@ -11647,25 +11519,25 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:63
+#: Installation_Guide.xml:68
 #, no-c-format
 msgid "boot options."
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:68
+#: Installation_Guide.xml:73
 #, no-c-format
 msgid "installing without media."
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:73
+#: Installation_Guide.xml:78
 #, no-c-format
 msgid "installing through VNC."
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:78
+#: Installation_Guide.xml:83
 #, no-c-format
 msgid ""
 "using <application>kickstart</application> to automate the installation "
@@ -11673,13 +11545,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Installation_Guide.xml:92
+#: Installation_Guide.xml:98
 #, no-c-format
 msgid "After installation"
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:94
+#: Installation_Guide.xml:100
 #, no-c-format
 msgid ""
 "This part of the <citetitle>Fedora Installation Guide</citetitle> covers "
@@ -11688,31 +11560,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:99
+#: Installation_Guide.xml:105
 #, no-c-format
 msgid "using a Fedora installation disk to rescue a damaged system."
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:104
+#: Installation_Guide.xml:110
 #, no-c-format
 msgid "upgrading to a new version of Fedora."
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:109
+#: Installation_Guide.xml:115
 #, no-c-format
 msgid "removing Fedora from your computer."
 msgstr ""
 
 #. Tag: title
-#: Installation_Guide.xml:123
+#: Installation_Guide.xml:129
 #, no-c-format
 msgid "Technical appendixes"
 msgstr ""
 
 #. Tag: para
-#: Installation_Guide.xml:125
+#: Installation_Guide.xml:131
 #, no-c-format
 msgid ""
 "The appendixes in this section do not contain instructions that tell you how "
@@ -11739,6 +11611,33 @@ msgid ""
 "packages you have selected and your computer's speed."
 msgstr ""
 
+#. Tag: primary
+#: Installing_Packages_common-para-2a.xml:7
+#, no-c-format
+msgid "install log file"
+msgstr ""
+
+#. Tag: filename
+#: Installing_Packages_common-para-2a.xml:8
+#: Installing_Packages_common-para-2a.xml:12
+#, no-c-format
+msgid "/root/install.log"
+msgstr ""
+
+#. Tag: secondary
+#: Installing_Packages_common-para-2a.xml:14
+#, no-c-format
+msgid "install log file location"
+msgstr ""
+
+#. Tag: para
+#: Installing_Packages_common-para-2a.xml:15
+#, no-c-format
+msgid ""
+"For your reference, a complete log of your installation can be found in "
+"<filename>/root/install.log</filename> once you reboot your system."
+msgstr ""
+
 #. Tag: para
 #: Installing_Packages_common-para-2.xml:6
 #, no-c-format
@@ -11794,23 +11693,30 @@ msgstr ""
 #: intro.xml:16
 #, no-c-format
 msgid ""
-"This document does not detail all of the features of the installation system."
-msgstr "Ten dokument nie opisuje wszystkich funkcji systemu instalacji."
+"This document details the full range of installation options, including "
+"those that apply only in limited or unusual circumstances. The "
+"<citetitle>Fedora &PRODVER; Installation Quick Start Guide</citetitle> "
+"provides a much-abbreviated set of instructions for downloading Fedora, "
+"creating an installation disc, and installing Fedora on a typical desktop or "
+"laptop computer. The <citetitle>Fedora &PRODVER; Installation Quick Start "
+"Guide</citetitle> is available from <ulink url=\"http://docs.fedoraproject."
+"org/installation-quick-start-guide/\"></ulink>."
+msgstr ""
 
 #. Tag: title
-#: intro.xml:19
+#: intro.xml:18
 #, no-c-format
 msgid "Background"
 msgstr "TÅ‚o"
 
 #. Tag: title
-#: intro.xml:21
+#: intro.xml:20
 #, no-c-format
 msgid "About Fedora"
 msgstr "Informacje o Fedorze"
 
 #. Tag: para
-#: intro.xml:22
+#: intro.xml:21
 #, fuzzy, no-c-format
 msgid ""
 "To find out more about Fedora, refer to <ulink url=\"http://fedoraproject."
@@ -11822,13 +11728,13 @@ msgstr ""
 "odwiedÅº <ulink url=\"http://docs.fedoraproject.org/\"/>."
 
 #. Tag: title
-#: intro.xml:26
+#: intro.xml:25
 #, no-c-format
 msgid "Getting Additional Help"
 msgstr "Dodatkowa pomoc"
 
 #. Tag: para
-#: intro.xml:27
+#: intro.xml:26
 #, fuzzy, no-c-format
 msgid ""
 "For information on additional help resources for Fedora, visit <ulink url="
@@ -11838,31 +11744,31 @@ msgstr ""
 "fedoraproject.org/wiki/Communicate\"/>."
 
 #. Tag: title
-#: intro.xml:32
+#: intro.xml:31
 #, no-c-format
 msgid "About This Document"
 msgstr "Informacje o tym dokumencie"
 
 #. Tag: title
-#: intro.xml:34
+#: intro.xml:33
 #, no-c-format
 msgid "Goals"
 msgstr "Cele"
 
 #. Tag: para
-#: intro.xml:35
+#: intro.xml:34
 #, no-c-format
 msgid "This guide helps a reader:"
 msgstr "Ten przewodnik pomoÅ¼e czytelnikowi:"
 
 #. Tag: para
-#: intro.xml:38
+#: intro.xml:37
 #, no-c-format
 msgid "Understand how to locate the Fedora distribution online"
 msgstr "ZrozumieÄ‡, jak znaleÅºÄ‡ w sieci dystrybucjÄ™ Fedora"
 
 #. Tag: para
-#: intro.xml:42
+#: intro.xml:41
 #, no-c-format
 msgid "Create configuration data that allows a computer to boot Fedora"
 msgstr ""
@@ -11870,25 +11776,25 @@ msgstr ""
 "Fedory"
 
 #. Tag: para
-#: intro.xml:46
+#: intro.xml:45
 #, no-c-format
 msgid "Understand and interact with the Fedora installation program"
 msgstr "ZrozumieÄ‡ program instalacyjny Fedory"
 
 #. Tag: para
-#: intro.xml:50
+#: intro.xml:49
 #, no-c-format
 msgid "Complete basic post-installation configuration of a Fedora system"
 msgstr "ZakoÅ„czyÄ‡ podstawowÄ… konfiguracjÄ™ systemu Fedora po instalacji"
 
 #. Tag: title
-#: intro.xml:55
+#: intro.xml:54
 #, no-c-format
 msgid "Other Sources of Documentation"
 msgstr "Inna ÅºrÃ³dÅ‚a dokumentacji"
 
 #. Tag: para
-#: intro.xml:56
+#: intro.xml:55
 #, fuzzy, no-c-format
 msgid ""
 "This guide does not cover use of Fedora. To learn how to use an installed "
@@ -11900,13 +11806,13 @@ msgstr ""
 "fedoraproject.org/\"/>."
 
 #. Tag: title
-#: intro.xml:62
+#: intro.xml:61
 #, no-c-format
 msgid "Audience"
 msgstr "Grupa docelowa"
 
 #. Tag: para
-#: intro.xml:63
+#: intro.xml:62
 #, fuzzy, no-c-format
 msgid ""
 "This guide is intended for new and intermediate Fedora users. Advanced "
@@ -12133,6 +12039,23 @@ msgstr ""
 msgid "Keyboard configuration screen"
 msgstr ""
 
+#. Tag: para
+#: Key_Board_Configuration-x86.xml:33
+#, no-c-format
+msgid ""
+"Fedora includes support for more than one keyboard layout for many "
+"languages. In particular, most European languages include a <literal>latin1</"
+"literal> option, which uses <firstterm>dead keys</firstterm> to access "
+"certain characters, such as those with diacritical marks. When you press a "
+"dead key, nothing will appear on your screen until you press another key to "
+"\"complete\" the character. For example, to type <literal>Ã©</literal> on a "
+"latin1 keyboard layout, you would press (and release) the <keycap>'</keycap> "
+"key, and then press the <literal>E</literal> key. By contrast, you access "
+"this character on some other keyboards by pressing and holding down a key "
+"(such as <keycap>Alt-Gr</keycap>) while you press the <literal>E</literal> "
+"key. Other keyboards might have a dedicated key for this character."
+msgstr ""
+
 #. Tag: primary
 #: Key_Board_Configuration_x86_ppc-indexterm-1.xml:9
 #, no-c-format
@@ -12189,10 +12112,10 @@ msgid "<see>kickstart installations</see>"
 msgstr ""
 
 #. Tag: primary
-#: Kickstart2.xml:12 Kickstart2.xml:73 Kickstart2.xml:1155 Kickstart2.xml:2654
-#: Kickstart2.xml:2692 Kickstart2.xml:2704 Kickstart2.xml:2715
-#: Kickstart2.xml:2743 Kickstart2.xml:2786 Kickstart2.xml:2801
-#: Kickstart2.xml:2815 Kickstart2.xml:2832 Kickstart2.xml:2863
+#: Kickstart2.xml:12 Kickstart2.xml:73 Kickstart2.xml:1155 Kickstart2.xml:2676
+#: Kickstart2.xml:2714 Kickstart2.xml:2726 Kickstart2.xml:2737
+#: Kickstart2.xml:2763 Kickstart2.xml:2806 Kickstart2.xml:2821
+#: Kickstart2.xml:2835 Kickstart2.xml:2852 Kickstart2.xml:2883
 #, no-c-format
 msgid "<primary>kickstart installations</primary>"
 msgstr ""
@@ -12304,18 +12227,18 @@ msgstr ""
 #: Kickstart2.xml:1090 Kickstart2.xml:1104 Kickstart2.xml:1129
 #: Kickstart2.xml:1146 Kickstart2.xml:1239 Kickstart2.xml:1279
 #: Kickstart2.xml:1293 Kickstart2.xml:1336 Kickstart2.xml:1349
-#: Kickstart2.xml:1502 Kickstart2.xml:1518 Kickstart2.xml:1523
-#: Kickstart2.xml:1731 Kickstart2.xml:1763 Kickstart2.xml:1863
-#: Kickstart2.xml:1897 Kickstart2.xml:1939 Kickstart2.xml:1963
-#: Kickstart2.xml:2012 Kickstart2.xml:2043 Kickstart2.xml:2065
-#: Kickstart2.xml:2079 Kickstart2.xml:2095 Kickstart2.xml:2119
-#: Kickstart2.xml:2135 Kickstart2.xml:2198 Kickstart2.xml:2236
-#: Kickstart2.xml:2284 Kickstart2.xml:2339 Kickstart2.xml:2356
-#: Kickstart2.xml:2409 Kickstart2.xml:2413 Kickstart2.xml:2426
-#: Kickstart2.xml:2443 Kickstart2.xml:2519 Kickstart2.xml:2523
-#: Kickstart2.xml:2578 Kickstart2.xml:2582 Kickstart2.xml:2696
-#: Kickstart2.xml:2708 Kickstart2.xml:2719 Kickstart2.xml:2747
-#: Kickstart2.xml:2805
+#: Kickstart2.xml:1507 Kickstart2.xml:1523 Kickstart2.xml:1528
+#: Kickstart2.xml:1736 Kickstart2.xml:1768 Kickstart2.xml:1868
+#: Kickstart2.xml:1902 Kickstart2.xml:1944 Kickstart2.xml:1968
+#: Kickstart2.xml:2017 Kickstart2.xml:2065 Kickstart2.xml:2087
+#: Kickstart2.xml:2101 Kickstart2.xml:2117 Kickstart2.xml:2141
+#: Kickstart2.xml:2157 Kickstart2.xml:2220 Kickstart2.xml:2258
+#: Kickstart2.xml:2306 Kickstart2.xml:2361 Kickstart2.xml:2378
+#: Kickstart2.xml:2431 Kickstart2.xml:2435 Kickstart2.xml:2448
+#: Kickstart2.xml:2465 Kickstart2.xml:2541 Kickstart2.xml:2545
+#: Kickstart2.xml:2600 Kickstart2.xml:2604 Kickstart2.xml:2718
+#: Kickstart2.xml:2730 Kickstart2.xml:2741 Kickstart2.xml:2767
+#: Kickstart2.xml:2825
 #, no-c-format
 msgid "kickstart file"
 msgstr ""
@@ -12466,7 +12389,7 @@ msgid "Kickstart Options"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:192 Kickstart2.xml:2427
+#: Kickstart2.xml:192 Kickstart2.xml:2449
 #, no-c-format
 msgid "options"
 msgstr ""
@@ -12587,7 +12510,7 @@ msgid "<command>autostep</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:276 Kickstart2.xml:2889
+#: Kickstart2.xml:276 Kickstart2.xml:2909
 #, no-c-format
 msgid "autostep"
 msgstr ""
@@ -13114,7 +13037,7 @@ msgid "<command>driverdisk</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:643 Kickstart2.xml:2934
+#: Kickstart2.xml:643 Kickstart2.xml:2954
 #, no-c-format
 msgid "driverdisk"
 msgstr ""
@@ -13384,7 +13307,7 @@ msgid "<command>graphical</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:826 Kickstart2.xml:2974
+#: Kickstart2.xml:826 Kickstart2.xml:2994
 #, no-c-format
 msgid "graphical"
 msgstr ""
@@ -13798,7 +13721,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1164 Kickstart2.xml:2243
+#: Kickstart2.xml:1164 Kickstart2.xml:2265
 #, no-c-format
 msgid "The options are as follows:"
 msgstr ""
@@ -13882,7 +13805,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1230 Kickstart2.xml:2269
+#: Kickstart2.xml:1230 Kickstart2.xml:2291
 #, no-c-format
 msgid ""
 "Create the partition first, create the logical volume group, and then create "
@@ -14056,7 +13979,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1362
+#: Kickstart2.xml:1361
 #, no-c-format
 msgid ""
 "<command>--bootproto=</command> — One of <command>dhcp</command>, "
@@ -14064,7 +13987,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1366
+#: Kickstart2.xml:1365
 #, no-c-format
 msgid ""
 "It defaults to <command>dhcp</command>. <command>bootp</command> and "
@@ -14072,7 +13995,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1370
+#: Kickstart2.xml:1369
 #, no-c-format
 msgid ""
 "The DHCP method uses a DHCP server system to obtain its networking "
@@ -14082,13 +14005,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1373
+#: Kickstart2.xml:1372
 #, no-c-format
 msgid "network --bootproto=dhcp"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1374
+#: Kickstart2.xml:1373
 #, no-c-format
 msgid ""
 "To direct a machine to use BOOTP to obtain its networking configuration, use "
@@ -14096,41 +14019,49 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1377
+#: Kickstart2.xml:1376
 #, no-c-format
 msgid "network --bootproto=bootp"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1378
+#: Kickstart2.xml:1377
 #, no-c-format
 msgid ""
 "The static method requires that you enter all the required networking "
 "information in the kickstart file. As the name implies, this information is "
-"static and are used during and after the installation. The line for static "
+"static and is used during and after the installation. The line for static "
 "networking is more complex, as you must include all network configuration "
 "information on one line. You must specify the IP address, netmask, gateway, "
-"and nameserver. For example: (the \"\\\" indicates that this should be read "
-"as one continuous line):"
+"and nameserver."
+msgstr ""
+
+#. Tag: para
+#: Kickstart2.xml:1380 Kickstart2.xml:1398
+#, no-c-format
+msgid ""
+"Note that although the presentation of this example on this page has broken "
+"the line, in a real kickstart file, you must include all this information on "
+"a single line with no break."
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1381
+#: Kickstart2.xml:1383
 #, no-c-format
 msgid ""
-"network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0 \\\n"
-"--gateway=10.0.2.254 --nameserver=10.0.2.1"
+"network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0\n"
+" --gateway=10.0.2.254 --nameserver=10.0.2.1"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1382
+#: Kickstart2.xml:1384
 #, no-c-format
 msgid ""
 "If you use the static method, be aware of the following two restrictions:"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1388
+#: Kickstart2.xml:1390
 #, no-c-format
 msgid ""
 "All static networking configuration information must be specified on "
@@ -14139,23 +14070,23 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1395
+#: Kickstart2.xml:1397
 #, no-c-format
 msgid ""
 "You can also configure multiple nameservers here. To do so, specify them as "
-"a comma-delimited list in the command line. For example:"
+"a comma-delimited list in the command line."
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1397
+#: Kickstart2.xml:1402
 #, no-c-format
 msgid ""
-"network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0 \\\n"
-"--gateway=10.0.2.254 --nameserver 192.168.2.1,192.168.3.1"
+"network --bootproto=static --ip=10.0.2.15 --netmask=255.255.255.0\n"
+" --gateway=10.0.2.254 --nameserver 192.168.2.1,192.168.3.1"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1406
+#: Kickstart2.xml:1411
 #, no-c-format
 msgid ""
 "<command>--device=</command> — Used to select a specific Ethernet "
@@ -14166,26 +14097,26 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1409
+#: Kickstart2.xml:1414
 #, no-c-format
 msgid "network --bootproto=dhcp --device=eth0"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1413
+#: Kickstart2.xml:1418
 #, no-c-format
 msgid ""
 "<command>--ip=</command> — IP address for the machine to be installed."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1419
+#: Kickstart2.xml:1424
 #, no-c-format
 msgid "<command>--gateway=</command> — Default gateway as an IP address."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1425
+#: Kickstart2.xml:1430
 #, no-c-format
 msgid ""
 "<command>--nameserver=</command> — Primary nameserver, as an IP "
@@ -14193,26 +14124,26 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1431
+#: Kickstart2.xml:1436
 #, no-c-format
 msgid "<command>--nodns</command> — Do not configure any DNS server."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1437
+#: Kickstart2.xml:1442
 #, no-c-format
 msgid "<command>--netmask=</command> — Netmask for the installed system."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1443
+#: Kickstart2.xml:1448
 #, no-c-format
 msgid ""
 "<command>--hostname=</command> — Hostname for the installed system."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1449
+#: Kickstart2.xml:1454
 #, no-c-format
 msgid ""
 "<command>--ethtool=</command> — Specifies additional low-level "
@@ -14220,14 +14151,14 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1455
+#: Kickstart2.xml:1460
 #, no-c-format
 msgid ""
 "<command>--essid=</command> — The network ID for wireless networks."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1461
+#: Kickstart2.xml:1466
 #, no-c-format
 msgid ""
 "<command>--wepkey=</command> — The encryption key for wireless "
@@ -14235,7 +14166,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1467
+#: Kickstart2.xml:1472
 #, no-c-format
 msgid ""
 "<command>--onboot=</command> — Whether or not to enable the device at "
@@ -14243,55 +14174,55 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1473
+#: Kickstart2.xml:1478
 #, no-c-format
 msgid "<command>--class=</command> — The DHCP class."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1479
+#: Kickstart2.xml:1484
 #, no-c-format
 msgid "<command>--mtu=</command> — The MTU of the device."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1485
+#: Kickstart2.xml:1490
 #, no-c-format
 msgid "<command>--noipv4</command> — Disable IPv4 on this device."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1491
+#: Kickstart2.xml:1496
 #, no-c-format
 msgid "<command>--noipv6</command> — Disable IPv6 on this device."
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1501
+#: Kickstart2.xml:1506
 #, no-c-format
 msgid "<command>multipath</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1503
+#: Kickstart2.xml:1508
 #, no-c-format
 msgid "multipath"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1508
+#: Kickstart2.xml:1513
 #, no-c-format
 msgid "multipath --name= --device= --rule="
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1519
+#: Kickstart2.xml:1524
 #, no-c-format
 msgid "part"
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1526
+#: Kickstart2.xml:1531
 #, no-c-format
 msgid ""
 "<command>part</command> or <command>partition</command> (required for "
@@ -14299,13 +14230,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1529
+#: Kickstart2.xml:1534
 #, no-c-format
 msgid "Creates a partition on the system."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1533
+#: Kickstart2.xml:1538
 #, no-c-format
 msgid ""
 "If more than one Fedora installation exists on the system on different "
@@ -14314,7 +14245,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1540
+#: Kickstart2.xml:1545
 #, no-c-format
 msgid ""
 "All partitions created are formatted as part of the installation process "
@@ -14323,7 +14254,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1548
+#: Kickstart2.xml:1553
 #, no-c-format
 msgid ""
 "For a detailed example of <command>part</command> in action, refer to <xref "
@@ -14331,7 +14262,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1556
+#: Kickstart2.xml:1561
 #, no-c-format
 msgid ""
 "<replaceable><mntpoint></replaceable> — The <replaceable><"
@@ -14340,13 +14271,13 @@ msgid ""
 msgstr ""
 
 #. Tag: filename
-#: Kickstart2.xml:1563
+#: Kickstart2.xml:1568
 #, no-c-format
 msgid "/<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1566
+#: Kickstart2.xml:1571
 #, no-c-format
 msgid ""
 "For example, <command>/</command>, <command>/usr</command>, <command>/home</"
@@ -14354,13 +14285,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1576
+#: Kickstart2.xml:1581
 #, no-c-format
 msgid "The partition is used as swap space."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1580
+#: Kickstart2.xml:1585
 #, no-c-format
 msgid ""
 "To determine the size of the swap partition automatically, use the "
@@ -14368,13 +14299,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1583
+#: Kickstart2.xml:1588
 #, no-c-format
 msgid "swap --recommended"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1585
+#: Kickstart2.xml:1590
 #, no-c-format
 msgid ""
 "The recommended maximum swap size for machines with less than 2GB of RAM is "
@@ -14383,32 +14314,32 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1591
+#: Kickstart2.xml:1596
 #, no-c-format
 msgid "raid.<replaceable><id></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1594
+#: Kickstart2.xml:1599
 #, no-c-format
 msgid ""
 "The partition is used for software RAID (refer to <command>raid</command>)."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1601
+#: Kickstart2.xml:1606
 #, no-c-format
 msgid "pv.<replaceable><id></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1604
+#: Kickstart2.xml:1609
 #, no-c-format
 msgid "The partition is used for LVM (refer to <command>logvol</command>)."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1612
+#: Kickstart2.xml:1617
 #, no-c-format
 msgid ""
 "<command>--size=</command> — The minimum partition size in megabytes. "
@@ -14416,7 +14347,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1618
+#: Kickstart2.xml:1623
 #, no-c-format
 msgid ""
 "<command>--grow</command> — Tells the partition to grow to fill "
@@ -14424,7 +14355,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1624
+#: Kickstart2.xml:1629
 #, no-c-format
 msgid ""
 "If you use <command>--grow=</command> without setting <command>--maxsize=</"
@@ -14436,7 +14367,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1630
+#: Kickstart2.xml:1635
 #, no-c-format
 msgid ""
 "<command>--maxsize=</command> — The maximum partition size in "
@@ -14445,7 +14376,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1636
+#: Kickstart2.xml:1641
 #, no-c-format
 msgid ""
 "<command>--noformat</command> — Tells the installation program not to "
@@ -14453,7 +14384,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1642
+#: Kickstart2.xml:1647
 #, no-c-format
 msgid ""
 "<command>--onpart=</command> or <command>--usepart=</command> — Put "
@@ -14462,13 +14393,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1645
+#: Kickstart2.xml:1650
 #, no-c-format
 msgid "partition /home --onpart=hda1"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1646
+#: Kickstart2.xml:1651
 #, no-c-format
 msgid ""
 "puts <filename>/home</filename> on <filename>/dev/hda1</filename>, which "
@@ -14476,7 +14407,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1652
+#: Kickstart2.xml:1657
 #, no-c-format
 msgid ""
 "<command>--ondisk=</command> or <command>--ondrive=</command> — Forces "
@@ -14486,7 +14417,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1658
+#: Kickstart2.xml:1663
 #, no-c-format
 msgid ""
 "<command>--asprimary</command> — Forces automatic allocation of the "
@@ -14494,7 +14425,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1664
+#: Kickstart2.xml:1669
 #, no-c-format
 msgid ""
 "<command>--type=</command> (replaced by <command>fstype</command>) — "
@@ -14502,7 +14433,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1670
+#: Kickstart2.xml:1675
 #, no-c-format
 msgid ""
 "<command>--fstype=</command> — Sets the file system type for the "
@@ -14512,7 +14443,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1676
+#: Kickstart2.xml:1681
 #, no-c-format
 msgid ""
 "<command>--start=</command> — Specifies the starting cylinder for the "
@@ -14523,7 +14454,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1683
+#: Kickstart2.xml:1688
 #, no-c-format
 msgid ""
 "<command>--end=</command> — Specifies the ending cylinder for the "
@@ -14532,7 +14463,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1689
+#: Kickstart2.xml:1694
 #, no-c-format
 msgid ""
 "<command>--bytes-per-inode=</command> — Specifies the size of inodes "
@@ -14541,7 +14472,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1695
+#: Kickstart2.xml:1700
 #, no-c-format
 msgid ""
 "<command>--recommended</command> — Determine the size of the partition "
@@ -14549,7 +14480,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1701
+#: Kickstart2.xml:1706
 #, no-c-format
 msgid ""
 "<command>--onbiosdisk</command> — Forces the partition to be created "
@@ -14557,7 +14488,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1707
+#: Kickstart2.xml:1712
 #, no-c-format
 msgid ""
 "<command>--encrypted</command> — Specifies that this partition should "
@@ -14565,7 +14496,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1713
+#: Kickstart2.xml:1718
 #, no-c-format
 msgid ""
 "<command>--passphrase=</command> — Specifies the passphrase to use "
@@ -14576,7 +14507,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1722
+#: Kickstart2.xml:1727
 #, no-c-format
 msgid ""
 "If partitioning fails for any reason, diagnostic messages appear on virtual "
@@ -14584,19 +14515,19 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1732
+#: Kickstart2.xml:1737
 #, no-c-format
 msgid "poweroff"
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1734
+#: Kickstart2.xml:1739
 #, no-c-format
 msgid "<command>poweroff</command> (optional)"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1737
+#: Kickstart2.xml:1742
 #, no-c-format
 msgid ""
 "Shut down and power off the system after the installation has successfully "
@@ -14607,7 +14538,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1742
+#: Kickstart2.xml:1747
 #, no-c-format
 msgid ""
 "The <command>poweroff</command> option is roughly equivalent to the "
@@ -14615,7 +14546,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1749
+#: Kickstart2.xml:1754
 #, no-c-format
 msgid ""
 "The <command>poweroff</command> option is highly dependent on the system "
@@ -14626,7 +14557,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1755
+#: Kickstart2.xml:1760
 #, no-c-format
 msgid ""
 "For other completion methods, refer to the <command>halt</command>, "
@@ -14634,31 +14565,31 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1764
+#: Kickstart2.xml:1769
 #, no-c-format
 msgid "raid"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:1769
+#: Kickstart2.xml:1774
 #, no-c-format
 msgid "<secondary>kickstart installations</secondary>"
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1770
+#: Kickstart2.xml:1775
 #, no-c-format
 msgid "<command>raid</command> (optional)"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1773
+#: Kickstart2.xml:1778
 #, no-c-format
 msgid "Assembles a software RAID device. This command is of the form:"
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1776
+#: Kickstart2.xml:1781
 #, no-c-format
 msgid ""
 "raid <replaceable><mntpoint></replaceable> --level=<replaceable><"
@@ -14667,7 +14598,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1780
+#: Kickstart2.xml:1785
 #, no-c-format
 msgid ""
 "<replaceable><mntpoint></replaceable> — Location where the RAID "
@@ -14681,13 +14612,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1788
+#: Kickstart2.xml:1793
 #, no-c-format
 msgid "<command>--level=</command> — RAID level to use (0, 1, or 5)."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1794
+#: Kickstart2.xml:1799
 #, no-c-format
 msgid ""
 "<command>--device=</command> — Name of the RAID device to use (such as "
@@ -14696,7 +14627,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1800
+#: Kickstart2.xml:1805
 #, no-c-format
 msgid ""
 "<command>--bytes-per-inode=</command> — Specifies the size of inodes "
@@ -14705,7 +14636,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1806
+#: Kickstart2.xml:1811
 #, no-c-format
 msgid ""
 "<command>--spares=</command> — Specifies the number of spare drives "
@@ -14714,7 +14645,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1812
+#: Kickstart2.xml:1817
 #, no-c-format
 msgid ""
 "<command>--fstype=</command> — Sets the file system type for the RAID "
@@ -14724,7 +14655,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1818
+#: Kickstart2.xml:1823
 #, no-c-format
 msgid ""
 "<command>--fsoptions=</command> — Specifies a free form string of "
@@ -14734,7 +14665,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1824
+#: Kickstart2.xml:1829
 #, no-c-format
 msgid ""
 "<command>--noformat</command> — Use an existing RAID device and do not "
@@ -14742,7 +14673,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1830
+#: Kickstart2.xml:1835
 #, no-c-format
 msgid ""
 "<command>--useexisting</command> — Use an existing RAID device and "
@@ -14750,7 +14681,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1836
+#: Kickstart2.xml:1841
 #, no-c-format
 msgid ""
 "<command>--encrypted</command> — Specifies that this RAID device "
@@ -14758,7 +14689,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1842
+#: Kickstart2.xml:1847
 #, no-c-format
 msgid ""
 "<command>--passphrase=</command> — Specifies the passphrase to use "
@@ -14769,7 +14700,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1847
+#: Kickstart2.xml:1852
 #, no-c-format
 msgid ""
 "The following example shows how to create a RAID level 1 partition for "
@@ -14779,7 +14710,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1851
+#: Kickstart2.xml:1856
 #, no-c-format
 msgid ""
 "part raid.01 --size=60 --ondisk=sda\n"
@@ -14788,7 +14719,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1852
+#: Kickstart2.xml:1857
 #, no-c-format
 msgid ""
 "part swap --size=128 --ondisk=sda  \n"
@@ -14797,7 +14728,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1853
+#: Kickstart2.xml:1858
 #, no-c-format
 msgid ""
 "part raid.11 --size=1 --grow --ondisk=sda  \n"
@@ -14806,7 +14737,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1854
+#: Kickstart2.xml:1859
 #, no-c-format
 msgid ""
 "raid / --level=1 --device=md0 raid.01 raid.02 raid.03  \n"
@@ -14814,7 +14745,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1855
+#: Kickstart2.xml:1860
 #, no-c-format
 msgid ""
 "For a detailed example of <command>raid</command> in action, refer to <xref "
@@ -14822,13 +14753,13 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1866
+#: Kickstart2.xml:1871
 #, no-c-format
 msgid "<command>reboot</command> (optional)"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1869
+#: Kickstart2.xml:1874
 #, no-c-format
 msgid ""
 "Reboot after the installation is successfully completed (no arguments). "
@@ -14837,7 +14768,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1873
+#: Kickstart2.xml:1878
 #, no-c-format
 msgid ""
 "The <command>reboot</command> option is roughly equivalent to the "
@@ -14845,7 +14776,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1880
+#: Kickstart2.xml:1885
 #, no-c-format
 msgid ""
 "Use of the <command>reboot</command> option <emphasis>may</emphasis> result "
@@ -14854,7 +14785,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1884
+#: Kickstart2.xml:1889
 #, no-c-format
 msgid ""
 "The <command>reboot</command> option is the default completion method if no "
@@ -14862,7 +14793,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1889
+#: Kickstart2.xml:1894
 #, no-c-format
 msgid ""
 "For other completion methods, refer to the <command>halt</command>, "
@@ -14871,13 +14802,13 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1896
+#: Kickstart2.xml:1901
 #, no-c-format
 msgid "<command>repo</command> (optional)"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1903
+#: Kickstart2.xml:1908
 #, no-c-format
 msgid ""
 "Configures additional yum repositories that may be used as sources for "
@@ -14885,7 +14816,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1907
+#: Kickstart2.xml:1912
 #, no-c-format
 msgid ""
 "repo --name=<replaceable><repoid></replaceable> [--"
@@ -14894,14 +14825,14 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1911
+#: Kickstart2.xml:1916
 #, no-c-format
 msgid ""
 "<command>--name=</command> — The repo id. This option is required."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1917
+#: Kickstart2.xml:1922
 #, no-c-format
 msgid ""
 "<command>--baseurl=</command> — The URL for the repository. The "
@@ -14910,7 +14841,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1923
+#: Kickstart2.xml:1928
 #, no-c-format
 msgid ""
 "<command>--mirrorlist=</command> — The URL pointing at a list of "
@@ -14920,19 +14851,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1935
+#: Kickstart2.xml:1940
 #, no-c-format
 msgid "<command>rootpw</command> (required)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1940
+#: Kickstart2.xml:1945
 #, no-c-format
 msgid "rootpw"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1942
+#: Kickstart2.xml:1947
 #, no-c-format
 msgid ""
 "Sets the system's root password to the <replaceable><password></"
@@ -14940,13 +14871,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1945
+#: Kickstart2.xml:1950
 #, no-c-format
 msgid "rootpw [--iscrypted] <replaceable><password></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1949
+#: Kickstart2.xml:1954
 #, no-c-format
 msgid ""
 "<command>--iscrypted</command> — If this is present, the password "
@@ -14954,19 +14885,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:1959
+#: Kickstart2.xml:1964
 #, no-c-format
 msgid "<command>selinux</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:1964
+#: Kickstart2.xml:1969
 #, no-c-format
 msgid "selinux"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1966
+#: Kickstart2.xml:1971
 #, no-c-format
 msgid ""
 "Sets the state of SELinux on the installed system. SELinux defaults to "
@@ -14974,13 +14905,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:1970
+#: Kickstart2.xml:1975
 #, no-c-format
 msgid "selinux [--disabled|--enforcing|--permissive]"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1975
+#: Kickstart2.xml:1980
 #, no-c-format
 msgid ""
 "<command>--enforcing</command> — Enables SELinux with the default "
@@ -14988,7 +14919,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1982
+#: Kickstart2.xml:1987
 #, no-c-format
 msgid ""
 "If the <command>selinux</command> option is not present in the kickstart "
@@ -14997,7 +14928,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1989
+#: Kickstart2.xml:1994
 #, no-c-format
 msgid ""
 "<command>--permissive</command> — Outputs warnings based on the "
@@ -15005,7 +14936,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:1995
+#: Kickstart2.xml:2000
 #, no-c-format
 msgid ""
 "<command>--disabled</command> — Disables SELinux completely on the "
@@ -15013,7 +14944,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2001
+#: Kickstart2.xml:2006
 #, no-c-format
 msgid ""
 "For complete information regarding SELinux for Fedora, refer to the "
@@ -15021,19 +14952,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2008
+#: Kickstart2.xml:2013
 #, no-c-format
 msgid "<command>services</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2013
+#: Kickstart2.xml:2018
 #, no-c-format
 msgid "services"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2015
+#: Kickstart2.xml:2020
 #, no-c-format
 msgid ""
 "Modifies the default set of services that will run under the default "
@@ -15042,7 +14973,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2023
+#: Kickstart2.xml:2028
 #, no-c-format
 msgid ""
 "<command>--disabled</command> — Disable the services given in the "
@@ -15050,27 +14981,61 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2029
+#: Kickstart2.xml:2034
 #, no-c-format
 msgid ""
 "<command>--enabled</command> — Enable the services given in the comma "
 "separated list."
 msgstr ""
 
+#. Tag: title
+#: Kickstart2.xml:2042
+#, no-c-format
+msgid "Do not include spaces in the list of services"
+msgstr ""
+
+#. Tag: para
+#: Kickstart2.xml:2043
+#, no-c-format
+msgid ""
+"If you include spaces in the comma-separated list, kickstart will enable or "
+"disable only the services up to the first space. For example:"
+msgstr ""
+
+#. Tag: command
+#: Kickstart2.xml:2047
+#, no-c-format
+msgid "services --disabled auditd, cups,smartd, nfslock"
+msgstr ""
+
+#. Tag: para
+#: Kickstart2.xml:2049
+#, no-c-format
+msgid ""
+"will disable only the <application>auditd</application> service. To disable "
+"all four services, this entry should include no spaces between services:"
+msgstr ""
+
+#. Tag: command
+#: Kickstart2.xml:2053
+#, no-c-format
+msgid "services --disabled auditd,cups,smartd,nfslock"
+msgstr ""
+
 #. Tag: term
-#: Kickstart2.xml:2039
+#: Kickstart2.xml:2061
 #, no-c-format
 msgid "<command>shutdown</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2044
+#: Kickstart2.xml:2066
 #, no-c-format
 msgid "shutdown"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2046
+#: Kickstart2.xml:2068
 #, no-c-format
 msgid ""
 "Shut down the system after the installation has successfully completed. "
@@ -15079,7 +15044,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2050
+#: Kickstart2.xml:2072
 #, no-c-format
 msgid ""
 "The <command>shutdown</command> option is roughly equivalent to the "
@@ -15087,7 +15052,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2054
+#: Kickstart2.xml:2076
 #, no-c-format
 msgid ""
 "For other completion methods, refer to the <command>halt</command>, "
@@ -15095,37 +15060,37 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2061
+#: Kickstart2.xml:2083
 #, no-c-format
 msgid "<command>skipx</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2066
+#: Kickstart2.xml:2088
 #, no-c-format
 msgid "skipx"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2068
+#: Kickstart2.xml:2090
 #, no-c-format
 msgid "If present, X is not configured on the installed system."
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2075
+#: Kickstart2.xml:2097
 #, no-c-format
 msgid "<command>text</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2080 Kickstart2.xml:3394
+#: Kickstart2.xml:2102 Kickstart2.xml:3420
 #, no-c-format
 msgid "text"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2082
+#: Kickstart2.xml:2104
 #, no-c-format
 msgid ""
 "Perform the kickstart installation in text mode. Kickstart installations are "
@@ -15133,19 +15098,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2091
+#: Kickstart2.xml:2113
 #, no-c-format
 msgid "<command>timezone</command> (required)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2096
+#: Kickstart2.xml:2118
 #, no-c-format
 msgid "timezone"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2098
+#: Kickstart2.xml:2120
 #, no-c-format
 msgid ""
 "Sets the system time zone to <replaceable><timezone></replaceable> "
@@ -15153,13 +15118,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2101
+#: Kickstart2.xml:2123
 #, no-c-format
 msgid "timezone [--utc] <replaceable><timezone></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2105
+#: Kickstart2.xml:2127
 #, no-c-format
 msgid ""
 "<command>--utc</command> — If present, the system assumes the hardware "
@@ -15167,19 +15132,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2115
+#: Kickstart2.xml:2137
 #, no-c-format
 msgid "<command>upgrade</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2120
+#: Kickstart2.xml:2142
 #, no-c-format
 msgid "upgrade"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2122
+#: Kickstart2.xml:2144
 #, no-c-format
 msgid ""
 "Tells the system to upgrade an existing system rather than install a fresh "
@@ -15190,25 +15155,25 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2131
+#: Kickstart2.xml:2153
 #, no-c-format
 msgid "<command>user</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2136
+#: Kickstart2.xml:2158
 #, no-c-format
 msgid "user"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2138
+#: Kickstart2.xml:2160
 #, no-c-format
 msgid "Creates a new user on the system."
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2142
+#: Kickstart2.xml:2164
 #, no-c-format
 msgid ""
 "user --name=<replaceable><username></replaceable> [--"
@@ -15219,7 +15184,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2148
+#: Kickstart2.xml:2170
 #, no-c-format
 msgid ""
 "<command>--name=</command> — Provides the name of the user. This "
@@ -15227,15 +15192,16 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2154
+#: Kickstart2.xml:2176
 #, no-c-format
 msgid ""
 "<command>--groups=</command> — In addition to the default group, a "
-"comma separated list of group names the user should belong to."
+"comma separated list of group names the user should belong to. The groups "
+"must exist before the user account is created."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2160
+#: Kickstart2.xml:2182
 #, no-c-format
 msgid ""
 "<command>--homedir=</command> — The home directory for the user. If "
@@ -15244,7 +15210,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2166
+#: Kickstart2.xml:2188
 #, no-c-format
 msgid ""
 "<command>--password=</command> — The new user's password. If not "
@@ -15252,7 +15218,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2172
+#: Kickstart2.xml:2194
 #, no-c-format
 msgid ""
 "<command>--iscrypted=</command> — Is the password provided by --"
@@ -15260,7 +15226,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2178
+#: Kickstart2.xml:2200
 #, no-c-format
 msgid ""
 "<command>--shell=</command> — The user's login shell. If not provided, "
@@ -15268,7 +15234,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2184
+#: Kickstart2.xml:2206
 #, no-c-format
 msgid ""
 "<command>--uid=</command> — The user's UID. If not provided, this "
@@ -15276,19 +15242,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2194
+#: Kickstart2.xml:2216
 #, no-c-format
 msgid "<command>vnc</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2199 Kickstart2.xml:3441
+#: Kickstart2.xml:2221 Kickstart2.xml:3467
 #, no-c-format
 msgid "<command>vnc</command>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2201
+#: Kickstart2.xml:2223
 #, no-c-format
 msgid ""
 "Allows the graphical installation to be viewed remotely via VNC. This method "
@@ -15299,7 +15265,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2205
+#: Kickstart2.xml:2227
 #, no-c-format
 msgid ""
 "vnc [--host=<replaceable><hostname></replaceable>] [--"
@@ -15308,7 +15274,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2210
+#: Kickstart2.xml:2232
 #, no-c-format
 msgid ""
 "<command>--host=</command> — Instead of starting a VNC server on the "
@@ -15317,7 +15283,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2216
+#: Kickstart2.xml:2238
 #, no-c-format
 msgid ""
 "<command>--port=</command> — Provide a port that the remote VNC viewer "
@@ -15325,7 +15291,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2222
+#: Kickstart2.xml:2244
 #, no-c-format
 msgid ""
 "<command>--password=</command> — Set a password which must be provided "
@@ -15333,25 +15299,25 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2232
+#: Kickstart2.xml:2254
 #, no-c-format
 msgid "<command>volgroup</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2237
+#: Kickstart2.xml:2259
 #, no-c-format
 msgid "volgroup"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2239
+#: Kickstart2.xml:2261
 #, no-c-format
 msgid "Use to create a Logical Volume Management (LVM) group with the syntax:"
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2242
+#: Kickstart2.xml:2264
 #, no-c-format
 msgid ""
 "volgroup <replaceable><name></replaceable> <replaceable><"
@@ -15359,7 +15325,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2250
+#: Kickstart2.xml:2272
 #, no-c-format
 msgid ""
 "<command>--noformat</command> — Use an existing volume group and do "
@@ -15367,7 +15333,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2256
+#: Kickstart2.xml:2278
 #, no-c-format
 msgid ""
 "<command>--useexisting</command> — Use an existing volume group and "
@@ -15375,14 +15341,14 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2262
+#: Kickstart2.xml:2284
 #, no-c-format
 msgid ""
 "<command>--pesize=</command> — Set the size of the physical extents."
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2272
+#: Kickstart2.xml:2294
 #, no-c-format
 msgid ""
 "part pv.01 --size 3000 \n"
@@ -15391,7 +15357,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2273
+#: Kickstart2.xml:2295
 #, no-c-format
 msgid ""
 "For a detailed example of <command>volgroup</command> in action, refer to "
@@ -15399,19 +15365,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2280
+#: Kickstart2.xml:2302
 #, no-c-format
 msgid "<command>xconfig</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2285
+#: Kickstart2.xml:2307
 #, no-c-format
 msgid "xconfig"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2287
+#: Kickstart2.xml:2309
 #, no-c-format
 msgid ""
 "Configures the X Window System. If this option is not given, the user must "
@@ -15420,7 +15386,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2294
+#: Kickstart2.xml:2316
 #, no-c-format
 msgid ""
 "<command>--driver</command> — Specify the X driver to use for the "
@@ -15428,7 +15394,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2300
+#: Kickstart2.xml:2322
 #, no-c-format
 msgid ""
 "<command>--videoram=</command> — Specifies the amount of video RAM the "
@@ -15436,7 +15402,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2306
+#: Kickstart2.xml:2328
 #, no-c-format
 msgid ""
 "<command>--defaultdesktop=</command> — Specify either GNOME or KDE to "
@@ -15445,7 +15411,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2312
+#: Kickstart2.xml:2334
 #, no-c-format
 msgid ""
 "<command>--startxonboot</command> — Use a graphical login on the "
@@ -15453,7 +15419,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2318
+#: Kickstart2.xml:2340
 #, no-c-format
 msgid ""
 "<command>--resolution=</command> — Specify the default resolution for "
@@ -15463,7 +15429,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2325
+#: Kickstart2.xml:2347
 #, no-c-format
 msgid ""
 "<command>--depth=</command> — Specify the default color depth for the "
@@ -15473,19 +15439,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2335
+#: Kickstart2.xml:2357
 #, no-c-format
 msgid "<command>zerombr</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2340
+#: Kickstart2.xml:2362
 #, no-c-format
 msgid "zerombr"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2342
+#: Kickstart2.xml:2364
 #, no-c-format
 msgid ""
 "If <command>zerombr</command> is specified any invalid partition tables "
@@ -15494,7 +15460,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2347
+#: Kickstart2.xml:2369
 #, no-c-format
 msgid ""
 "Note that this command was previously specified as <command>zerombr yes</"
@@ -15503,25 +15469,25 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2352
+#: Kickstart2.xml:2374
 #, no-c-format
 msgid "<command>zfcp</command> (optional)"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2357
+#: Kickstart2.xml:2379
 #, no-c-format
 msgid "zfcp"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2359
+#: Kickstart2.xml:2381
 #, no-c-format
 msgid "Define a Fiber channel device (IBM System z)."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2363
+#: Kickstart2.xml:2385
 #, no-c-format
 msgid ""
 "zfcp [--devnum=<replaceable><devnum></replaceable>] [--"
@@ -15531,25 +15497,25 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2405
+#: Kickstart2.xml:2427
 #, no-c-format
 msgid "<command>%include</command> (optional)"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2410
+#: Kickstart2.xml:2432
 #, no-c-format
 msgid "include contents of another file"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2414
+#: Kickstart2.xml:2436
 #, no-c-format
 msgid "%include"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2416
+#: Kickstart2.xml:2438
 #, no-c-format
 msgid ""
 "Use the <command>%include <replaceable>/path/to/file</replaceable></command> "
@@ -15559,19 +15525,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2424
+#: Kickstart2.xml:2446
 #, no-c-format
 msgid "Advanced Partitioning Example"
 msgstr ""
 
 #. Tag: tertiary
-#: Kickstart2.xml:2428
+#: Kickstart2.xml:2450
 #, no-c-format
 msgid "partitioning examples"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2430
+#: Kickstart2.xml:2452
 #, no-c-format
 msgid ""
 "The following is a single, integrated example showing the "
@@ -15581,7 +15547,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2434
+#: Kickstart2.xml:2456
 #, no-c-format
 msgid ""
 "clearpart --drives=hda,hdc --initlabel  \n"
@@ -15613,7 +15579,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2435
+#: Kickstart2.xml:2457
 #, no-c-format
 msgid ""
 "This advanced example implements LVM over RAID, as well as the ability to "
@@ -15621,13 +15587,13 @@ msgid ""
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2444
+#: Kickstart2.xml:2466
 #, no-c-format
 msgid "package selection specification"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2446
+#: Kickstart2.xml:2468
 #, no-c-format
 msgid ""
 "Use the <command>%packages</command> command to begin a kickstart file "
@@ -15636,7 +15602,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2450
+#: Kickstart2.xml:2472
 #, no-c-format
 msgid ""
 "Packages can be specified by group or by individual package name, including "
@@ -15652,7 +15618,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2454
+#: Kickstart2.xml:2476
 #, no-c-format
 msgid ""
 "In most cases, it is only necessary to list the desired groups and not "
@@ -15662,13 +15628,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2458
+#: Kickstart2.xml:2480
 #, no-c-format
 msgid "Here is an example <command>%packages</command> selection:"
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2461
+#: Kickstart2.xml:2483
 #, no-c-format
 msgid ""
 "%packages \n"
@@ -15679,7 +15645,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2462
+#: Kickstart2.xml:2484
 #, no-c-format
 msgid ""
 "As you can see, groups are specified, one to a line, starting with an "
@@ -15692,7 +15658,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2468
+#: Kickstart2.xml:2490
 #, no-c-format
 msgid ""
 "You can also specify which packages not to install from the default package "
@@ -15700,13 +15666,13 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2471
+#: Kickstart2.xml:2493
 #, no-c-format
 msgid "-autofs"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2472
+#: Kickstart2.xml:2494
 #, no-c-format
 msgid ""
 "The following options are available for the <command>%packages</command> "
@@ -15714,13 +15680,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2479
+#: Kickstart2.xml:2501
 #, no-c-format
 msgid "--nobase"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2481
+#: Kickstart2.xml:2503
 #, no-c-format
 msgid ""
 "Do not install the @Base group. Use this option if you are trying to create "
@@ -15728,13 +15694,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2488
+#: Kickstart2.xml:2510
 #, no-c-format
 msgid "--resolvedeps"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2490
+#: Kickstart2.xml:2512
 #, no-c-format
 msgid ""
 "The --resolvedeps option has been deprecated. Dependencies are resolved "
@@ -15742,13 +15708,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2497
+#: Kickstart2.xml:2519
 #, no-c-format
 msgid "--ignoredeps"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2499
+#: Kickstart2.xml:2521
 #, no-c-format
 msgid ""
 "The --ignoredeps option has been deprecated. Dependencies are resolved "
@@ -15756,13 +15722,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2506
+#: Kickstart2.xml:2528
 #, no-c-format
 msgid "--ignoremissing"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2508
+#: Kickstart2.xml:2530
 #, no-c-format
 msgid ""
 "Ignore the missing packages and groups instead of halting the installation "
@@ -15770,31 +15736,31 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2511
+#: Kickstart2.xml:2533
 #, no-c-format
 msgid "%packages --ignoremissing"
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2517
+#: Kickstart2.xml:2539
 #, no-c-format
 msgid "Pre-installation Script"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2520
+#: Kickstart2.xml:2542
 #, no-c-format
 msgid "pre-installation configuration"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2524
+#: Kickstart2.xml:2546
 #, no-c-format
 msgid "%pre"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2526
+#: Kickstart2.xml:2548
 #, no-c-format
 msgid ""
 "You can add commands to run on the system immediately after the <filename>ks."
@@ -15806,20 +15772,20 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2534
+#: Kickstart2.xml:2556
 #, no-c-format
 msgid ""
 "Note that the pre-install script is not run in the change root environment."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2541 Kickstart2.xml:2621
+#: Kickstart2.xml:2563 Kickstart2.xml:2643
 #, no-c-format
 msgid "--interpreter <replaceable>/usr/bin/python</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2543 Kickstart2.xml:2623
+#: Kickstart2.xml:2565 Kickstart2.xml:2645
 #, no-c-format
 msgid ""
 "Allows you to specify a different scripting language, such as Python. "
@@ -15828,19 +15794,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2551
+#: Kickstart2.xml:2573
 #, no-c-format
 msgid "Example"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2553
+#: Kickstart2.xml:2575
 #, no-c-format
 msgid "Here is an example <command>%pre</command> section:"
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2556
+#: Kickstart2.xml:2578
 #, no-c-format
 msgid ""
 "%pre  \n"
@@ -15887,7 +15853,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2557
+#: Kickstart2.xml:2579
 #, no-c-format
 msgid ""
 "This script determines the number of hard drives in the system and writes a "
@@ -15897,19 +15863,19 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2561
+#: Kickstart2.xml:2583
 #, no-c-format
 msgid "%include /tmp/part-include"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2562
+#: Kickstart2.xml:2584
 #, no-c-format
 msgid "The partitioning commands selected in the script are used."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2569
+#: Kickstart2.xml:2591
 #, no-c-format
 msgid ""
 "The pre-installation script section of kickstart <emphasis>cannot</emphasis> "
@@ -15919,25 +15885,25 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2576
+#: Kickstart2.xml:2598
 #, no-c-format
 msgid "Post-installation Script"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2579
+#: Kickstart2.xml:2601
 #, no-c-format
 msgid "post-installation configuration"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2583
+#: Kickstart2.xml:2605
 #, no-c-format
 msgid "%post"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2585
+#: Kickstart2.xml:2607
 #, no-c-format
 msgid ""
 "You have the option of adding commands to run on the system once the "
@@ -15948,7 +15914,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2592
+#: Kickstart2.xml:2614
 #, no-c-format
 msgid ""
 "If you configured the network with static IP information, including a "
@@ -15962,7 +15928,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2600
+#: Kickstart2.xml:2622
 #, no-c-format
 msgid ""
 "The post-install script is run in a chroot environment; therefore, "
@@ -15971,13 +15937,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2607
+#: Kickstart2.xml:2629
 #, no-c-format
 msgid "--nochroot"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2609
+#: Kickstart2.xml:2631
 #, no-c-format
 msgid ""
 "Allows you to specify commands that you would like to run outside of the "
@@ -15985,7 +15951,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2613
+#: Kickstart2.xml:2635
 #, no-c-format
 msgid ""
 "The following example copies the file <filename>/etc/resolv.conf</filename> "
@@ -15993,25 +15959,25 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2616
+#: Kickstart2.xml:2638
 #, no-c-format
 msgid "%post --nochroot cp /etc/resolv.conf /mnt/sysimage/etc/resolv.conf"
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2631
+#: Kickstart2.xml:2653
 #, no-c-format
 msgid "Examples"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2633
+#: Kickstart2.xml:2655
 #, no-c-format
 msgid "Register the system to a Red Hat Network Satellite:"
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2636
+#: Kickstart2.xml:2658
 #, no-c-format
 msgid ""
 "%post\n"
@@ -16025,13 +15991,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2637
+#: Kickstart2.xml:2659
 #, no-c-format
 msgid "Run a script named <filename>runme</filename> from an NFS share:"
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2640
+#: Kickstart2.xml:2662
 #, no-c-format
 msgid ""
 "mkdir /mnt/temp \n"
@@ -16041,7 +16007,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2644
+#: Kickstart2.xml:2666
 #, no-c-format
 msgid ""
 "NFS file locking is <emphasis>not</emphasis> supported while in kickstart "
@@ -16050,43 +16016,43 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2652
+#: Kickstart2.xml:2674
 #, no-c-format
 msgid "Making the Kickstart File Available"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2655
+#: Kickstart2.xml:2677
 #, no-c-format
 msgid "file locations"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2657
+#: Kickstart2.xml:2679
 #, no-c-format
 msgid "A kickstart file must be placed in one of the following locations:"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2663
+#: Kickstart2.xml:2685
 #, no-c-format
 msgid "On a boot diskette"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2669
+#: Kickstart2.xml:2691
 #, no-c-format
 msgid "On a boot CD-ROM"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2675
+#: Kickstart2.xml:2697
 #, no-c-format
 msgid "On a network"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2681
+#: Kickstart2.xml:2703
 #, no-c-format
 msgid ""
 "Normally a kickstart file is copied to the boot diskette, or made available "
@@ -16095,26 +16061,26 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2685
+#: Kickstart2.xml:2707
 #, no-c-format
 msgid ""
 "Let us take a more in-depth look at where the kickstart file may be placed."
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2690
+#: Kickstart2.xml:2712
 #, no-c-format
 msgid "Creating Kickstart Boot Media"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2693 Kickstart2.xml:2697
+#: Kickstart2.xml:2715 Kickstart2.xml:2719
 #, no-c-format
 msgid "diskette-based"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2699
+#: Kickstart2.xml:2721
 #, no-c-format
 msgid ""
 "Diskette-based booting is no longer supported in Fedora. Installations must "
@@ -16124,33 +16090,33 @@ msgid ""
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2705 Kickstart2.xml:2709
+#: Kickstart2.xml:2727 Kickstart2.xml:2731
 #, no-c-format
 msgid "CD-ROM-based"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2711
+#: Kickstart2.xml:2733
 #, no-c-format
 msgid ""
 "To perform a CD-ROM-based kickstart installation, the kickstart file must be "
 "named <filename>ks.cfg</filename> and must be located in the boot CD-ROM's "
 "top-level directory. Since a CD-ROM is read-only, the file must be added to "
 "the directory used to create the image that is written to the CD-ROM. Refer "
-"to <xref linkend=\"s2-steps-make-cd\"/> for instructions on creating boot "
-"media; however, before making the <filename>file.iso</filename> image file, "
-"copy the <filename>ks.cfg</filename> kickstart file to the "
-"<filename>isolinux/</filename> directory."
+"to <xref linkend=\"sect-New_Users-Alternative_Boot_Methods\"/> for "
+"instructions on creating boot media; however, before making the "
+"<filename>file.iso</filename> image file, copy the <filename>ks.cfg</"
+"filename> kickstart file to the <filename>isolinux/</filename> directory."
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2716 Kickstart2.xml:2720
+#: Kickstart2.xml:2738 Kickstart2.xml:2742
 #, no-c-format
 msgid "flash-based"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2722
+#: Kickstart2.xml:2744
 #, no-c-format
 msgid ""
 "To perform a pen-based flash memory kickstart installation, the kickstart "
@@ -16160,21 +16126,18 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2727
+#: Kickstart2.xml:2748
 #, no-c-format
 msgid ""
-"For example, the following transfers a boot image to the pen drive "
-"(<filename>/dev/sda</filename>) using the <command>dd</command> command:"
-msgstr ""
-
-#. Tag: screen
-#: Kickstart2.xml:2730
-#, no-c-format
-msgid "dd if=diskboot.img of=/dev/sda bs=1M"
+"Refer to <xref linkend=\"sect-New_Users-Alternative_Boot_Methods\"/> for "
+"instructions on creating live USB media using the <filename>boot.iso</"
+"filename> image available for download from the same servers that host "
+"images of the Fedora installation disks — refer to <xref linkend="
+"\"sect-Obtaining_Fedora-Downloading_Fedora\"/>."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2734
+#: Kickstart2.xml:2754
 #, no-c-format
 msgid ""
 "Creation of USB flash memory pen drives for booting is possible, but is "
@@ -16183,20 +16146,20 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2741
+#: Kickstart2.xml:2761
 #, no-c-format
 msgid "Making the Kickstart File Available on the Network"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2744 Kickstart2.xml:2748 Kickstart2.xml:2802
-#: Kickstart2.xml:2806
+#: Kickstart2.xml:2764 Kickstart2.xml:2768 Kickstart2.xml:2822
+#: Kickstart2.xml:2826
 #, no-c-format
 msgid "network-based"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2750
+#: Kickstart2.xml:2770
 #, no-c-format
 msgid ""
 "Network installations using kickstart are quite common, because system "
@@ -16210,7 +16173,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2754
+#: Kickstart2.xml:2774
 #, no-c-format
 msgid ""
 "To perform a network-based kickstart installation, you must have a BOOTP/"
@@ -16221,7 +16184,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2758
+#: Kickstart2.xml:2778
 #, no-c-format
 msgid ""
 "If a kickstart file is specified by the BOOTP/DHCP server, the client system "
@@ -16231,7 +16194,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2762
+#: Kickstart2.xml:2782
 #, no-c-format
 msgid ""
 "Here is an example of a line from the <filename>dhcpd.conf</filename> file "
@@ -16239,7 +16202,7 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2765
+#: Kickstart2.xml:2785
 #, no-c-format
 msgid ""
 "<filename>filename</filename> <replaceable>\"/usr/new-machine/kickstart/\"</"
@@ -16247,7 +16210,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2766
+#: Kickstart2.xml:2786
 #, no-c-format
 msgid ""
 "Note that you should replace the value after <computeroutput>filename</"
@@ -16257,7 +16220,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2770
+#: Kickstart2.xml:2790
 #, no-c-format
 msgid ""
 "If the file name returned by the BOOTP/DHCP server ends with a slash (\"/"
@@ -16267,14 +16230,14 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2773
+#: Kickstart2.xml:2793
 #, no-c-format
 msgid ""
 "<filename><replaceable><ip-addr></replaceable>-kickstart</filename>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2774
+#: Kickstart2.xml:2794
 #, no-c-format
 msgid ""
 "The <filename><replaceable><ip-addr></replaceable></filename> section "
@@ -16284,7 +16247,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2778
+#: Kickstart2.xml:2798
 #, no-c-format
 msgid ""
 "Note that if you do not specify a server name, then the client system "
@@ -16296,19 +16259,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2784
+#: Kickstart2.xml:2804
 #, no-c-format
 msgid "Making the Installation Tree Available"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2787
+#: Kickstart2.xml:2807
 #, no-c-format
 msgid "installation tree"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2789
+#: Kickstart2.xml:2809
 #, no-c-format
 msgid ""
 "The kickstart installation must access an <firstterm>installation tree</"
@@ -16317,7 +16280,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2793
+#: Kickstart2.xml:2813
 #, no-c-format
 msgid ""
 "If you are performing a CD-based installation, insert the Fedora CD-ROM #1 "
@@ -16325,7 +16288,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2797
+#: Kickstart2.xml:2817
 #, no-c-format
 msgid ""
 "If you are performing a hard drive installation, make sure the ISO images of "
@@ -16333,7 +16296,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2808
+#: Kickstart2.xml:2828
 #, no-c-format
 msgid ""
 "If you are performing a network-based (NFS, FTP, or HTTP) installation, you "
@@ -16342,25 +16305,25 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Kickstart2.xml:2813
+#: Kickstart2.xml:2833
 #, no-c-format
 msgid "Starting a Kickstart Installation"
 msgstr ""
 
 #. Tag: primary
-#: Kickstart2.xml:2819
+#: Kickstart2.xml:2839
 #, no-c-format
 msgid "<primary>kickstart</primary>"
 msgstr ""
 
 #. Tag: secondary
-#: Kickstart2.xml:2820
+#: Kickstart2.xml:2840
 #, no-c-format
 msgid "how the file is found"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2822
+#: Kickstart2.xml:2842
 #, no-c-format
 msgid ""
 "To begin a kickstart installation, you must boot the system from boot media "
@@ -16370,19 +16333,19 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2828
+#: Kickstart2.xml:2848
 #, no-c-format
 msgid "CD-ROM #1 and Diskette"
 msgstr ""
 
 #. Tag: tertiary
-#: Kickstart2.xml:2834
+#: Kickstart2.xml:2854
 #, no-c-format
 msgid "from CD-ROM #1 with a diskette"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2835
+#: Kickstart2.xml:2855
 #, no-c-format
 msgid ""
 "The <userinput>linux ks=floppy</userinput> command also works if the "
@@ -16391,7 +16354,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2839
+#: Kickstart2.xml:2859
 #, no-c-format
 msgid ""
 "An alternate boot command is to boot off the Fedora CD-ROM #1 and have the "
@@ -16400,19 +16363,19 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2842
+#: Kickstart2.xml:2862
 #, no-c-format
 msgid "linux ks=hd:fd0:/ks.cfg"
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2849
+#: Kickstart2.xml:2869
 #, no-c-format
 msgid "With Driver Disk"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2851
+#: Kickstart2.xml:2871
 #, no-c-format
 msgid ""
 "If you need to use a driver disk with kickstart, specify the <userinput>dd</"
@@ -16422,25 +16385,25 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2854
+#: Kickstart2.xml:2874
 #, no-c-format
 msgid "linux ks=floppy dd"
 msgstr ""
 
 #. Tag: term
-#: Kickstart2.xml:2859
+#: Kickstart2.xml:2879
 #, no-c-format
 msgid "Boot CD-ROM"
 msgstr ""
 
 #. Tag: tertiary
-#: Kickstart2.xml:2865
+#: Kickstart2.xml:2885
 #, no-c-format
 msgid "from a boot CD-ROM"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2866
+#: Kickstart2.xml:2886
 #, no-c-format
 msgid ""
 "If the kickstart file is on a boot CD-ROM as described in <xref linkend=\"s2-"
@@ -16450,25 +16413,25 @@ msgid ""
 msgstr ""
 
 #. Tag: screen
-#: Kickstart2.xml:2869
+#: Kickstart2.xml:2889
 #, no-c-format
 msgid "linux ks=cdrom:/ks.cfg"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2874
+#: Kickstart2.xml:2894
 #, no-c-format
 msgid "Other options to start a kickstart installation are as follows:"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2880
+#: Kickstart2.xml:2900
 #, no-c-format
 msgid "askmethod"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2882
+#: Kickstart2.xml:2902
 #, no-c-format
 msgid ""
 "Do not automatically use the CD-ROM as the install source if we detect a "
@@ -16476,43 +16439,43 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2891
+#: Kickstart2.xml:2911
 #, no-c-format
 msgid "Make kickstart non-interactive."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2898
+#: Kickstart2.xml:2918
 #, no-c-format
 msgid "debug"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2900
+#: Kickstart2.xml:2920
 #, no-c-format
 msgid "Start up pdb immediately."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2907
+#: Kickstart2.xml:2927
 #, no-c-format
 msgid "<command>dd</command>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2909
+#: Kickstart2.xml:2929
 #, no-c-format
 msgid "Use a driver disk."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2916
+#: Kickstart2.xml:2936
 #, no-c-format
 msgid "dhcpclass=<replaceable><class></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2918
+#: Kickstart2.xml:2938
 #, no-c-format
 msgid ""
 "Sends a custom DHCP vendor class identifier. ISC's dhcpcd can inspect this "
@@ -16520,97 +16483,97 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2925
+#: Kickstart2.xml:2945
 #, no-c-format
 msgid "dns=<replaceable><dns></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2927
+#: Kickstart2.xml:2947
 #, no-c-format
 msgid "Comma separated list of nameservers to use for a network installation."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2936
+#: Kickstart2.xml:2956
 #, no-c-format
 msgid "Same as 'dd'."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2943
+#: Kickstart2.xml:2963
 #, no-c-format
 msgid "expert"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2945
+#: Kickstart2.xml:2965
 #, no-c-format
 msgid "Turns on special features:"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2949
+#: Kickstart2.xml:2969
 #, no-c-format
 msgid "allows partitioning of removable media"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2955
+#: Kickstart2.xml:2975
 #, no-c-format
 msgid "prompts for a driver disk"
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2965
+#: Kickstart2.xml:2985
 #, no-c-format
 msgid "gateway=<replaceable><gw></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2967
+#: Kickstart2.xml:2987
 #, no-c-format
 msgid "Gateway to use for a network installation."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2976
+#: Kickstart2.xml:2996
 #, no-c-format
 msgid "Force graphical install. Required to have ftp/http use GUI."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2983
+#: Kickstart2.xml:3003
 #, no-c-format
 msgid "<command>isa</command>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2985
+#: Kickstart2.xml:3005
 #, no-c-format
 msgid "Prompt user for ISA devices configuration."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:2992
+#: Kickstart2.xml:3012
 #, no-c-format
 msgid "ip=<replaceable><ip></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:2994
+#: Kickstart2.xml:3014
 #, no-c-format
 msgid "IP to use for a network installation, use 'dhcp' for DHCP."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3001
+#: Kickstart2.xml:3021
 #, no-c-format
 msgid "keymap=<replaceable><keymap></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3003
+#: Kickstart2.xml:3023
 #, no-c-format
 msgid ""
 "Keyboard layout to use. Valid values are those which can be used for the "
@@ -16618,7 +16581,7 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3010
+#: Kickstart2.xml:3030
 #, no-c-format
 msgid ""
 "ks=nfs:<replaceable><server></replaceable>:/<replaceable><path></"
@@ -16626,7 +16589,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3012
+#: Kickstart2.xml:3032
 #, no-c-format
 msgid ""
 "The installation program looks for the kickstart file on the NFS server "
@@ -16639,7 +16602,7 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3019
+#: Kickstart2.xml:3039
 #, no-c-format
 msgid ""
 "ks=http://<replaceable><server></replaceable>/<replaceable><path>"
@@ -16647,7 +16610,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3021
+#: Kickstart2.xml:3041
 #, no-c-format
 msgid ""
 "The installation program looks for the kickstart file on the HTTP server "
@@ -16660,13 +16623,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3028
+#: Kickstart2.xml:3048
 #, no-c-format
 msgid "ks=floppy"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3030
+#: Kickstart2.xml:3050
 #, no-c-format
 msgid ""
 "The installation program looks for the file <filename>ks.cfg</filename> on a "
@@ -16674,13 +16637,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3037
+#: Kickstart2.xml:3057
 #, no-c-format
 msgid "ks=floppy:/<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3039
+#: Kickstart2.xml:3059
 #, no-c-format
 msgid ""
 "The installation program looks for the kickstart file on the diskette in "
@@ -16689,7 +16652,7 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3046
+#: Kickstart2.xml:3066
 #, no-c-format
 msgid ""
 "ks=hd:<replaceable><device></replaceable>:/<replaceable><file></"
@@ -16697,7 +16660,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3048
+#: Kickstart2.xml:3068
 #, no-c-format
 msgid ""
 "The installation program mounts the file system on <replaceable><"
@@ -16707,13 +16670,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3055
+#: Kickstart2.xml:3075
 #, no-c-format
 msgid "ks=file:/<replaceable><file></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3057
+#: Kickstart2.xml:3077
 #, no-c-format
 msgid ""
 "The installation program tries to read the file <replaceable><file></"
@@ -16722,13 +16685,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3064
+#: Kickstart2.xml:3084
 #, no-c-format
 msgid "ks=cdrom:/<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3066
+#: Kickstart2.xml:3086
 #, no-c-format
 msgid ""
 "The installation program looks for the kickstart file on CD-ROM, as file "
@@ -16736,13 +16699,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3073
+#: Kickstart2.xml:3093
 #, no-c-format
 msgid "<command>ks</command>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3075
+#: Kickstart2.xml:3095
 #, no-c-format
 msgid ""
 "If <command>ks</command> is used alone, the installation program configures "
@@ -16753,7 +16716,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3081
+#: Kickstart2.xml:3101
 #, no-c-format
 msgid ""
 "If DHCP is specified and the boot file begins with a <filename>/</filename>, "
@@ -16761,7 +16724,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3087
+#: Kickstart2.xml:3107
 #, no-c-format
 msgid ""
 "If DHCP is specified and the boot file begins with something other than a "
@@ -16770,7 +16733,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3093
+#: Kickstart2.xml:3113
 #, no-c-format
 msgid ""
 "If DHCP did not specify a boot file, then the installation program tries to "
@@ -16780,13 +16743,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3102
+#: Kickstart2.xml:3122
 #, no-c-format
 msgid "ksdevice=<replaceable><device></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3104
+#: Kickstart2.xml:3124
 #, no-c-format
 msgid ""
 "The installation program uses this network device to connect to the network. "
@@ -16798,13 +16761,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3111
+#: Kickstart2.xml:3131
 #, no-c-format
 msgid "kssendmac"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3113
+#: Kickstart2.xml:3133
 #, no-c-format
 msgid ""
 "Adds HTTP headers to ks=http:// request that can be helpful for provisioning "
@@ -16813,13 +16776,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3120
+#: Kickstart2.xml:3140
 #, no-c-format
 msgid "lang=<replaceable><lang></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3122
+#: Kickstart2.xml:3142
 #, no-c-format
 msgid ""
 "Language to use for the installation. This should be a language which is "
@@ -16827,13 +16790,13 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3129
+#: Kickstart2.xml:3149
 #, no-c-format
 msgid "loglevel=<replaceable><level></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3131
+#: Kickstart2.xml:3151
 #, no-c-format
 msgid ""
 "Set the minimum level required for messages to be logged. Values for <"
@@ -16842,19 +16805,19 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3138
+#: Kickstart2.xml:3158
 #, no-c-format
 msgid "lowres"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3140
+#: Kickstart2.xml:3160
 #, no-c-format
 msgid "Force GUI installer to run at 640x480."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3149
+#: Kickstart2.xml:3169
 #, no-c-format
 msgid ""
 "Activates loader code to give user option of testing integrity of install "
@@ -16862,31 +16825,31 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3156
+#: Kickstart2.xml:3176
 #, no-c-format
 msgid "method=cdrom"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3158
+#: Kickstart2.xml:3178
 #, no-c-format
 msgid "Do a CDROM based installation."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3165
+#: Kickstart2.xml:3185
 #, no-c-format
 msgid "method=ftp://<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3167
+#: Kickstart2.xml:3187
 #, no-c-format
 msgid "Use <path> for an FTP installation."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3174
+#: Kickstart2.xml:3194
 #, no-c-format
 msgid ""
 "method=hd:<replaceable><dev></replaceable>:<replaceable><path></"
@@ -16894,67 +16857,67 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3178
+#: Kickstart2.xml:3198
 #, no-c-format
 msgid "Use <path> on <dev> for a hard drive installation."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3185
+#: Kickstart2.xml:3205
 #, no-c-format
 msgid "method=http://<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3187
+#: Kickstart2.xml:3207
 #, no-c-format
 msgid "Use <path> for an HTTP installation."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3194
+#: Kickstart2.xml:3214
 #, no-c-format
 msgid "method=nfs:<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3196
+#: Kickstart2.xml:3216
 #, no-c-format
 msgid "Use <path> for an NFS installation."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3203
+#: Kickstart2.xml:3223
 #, no-c-format
 msgid "netmask=<replaceable><nm></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3205
+#: Kickstart2.xml:3225
 #, no-c-format
 msgid "Netmask to use for a network installation."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3212
+#: Kickstart2.xml:3232
 #, no-c-format
 msgid "nofallback"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3214
+#: Kickstart2.xml:3234
 #, no-c-format
 msgid "If GUI fails exit."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3221
+#: Kickstart2.xml:3241
 #, no-c-format
 msgid "nofb"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3223
+#: Kickstart2.xml:3243
 #, no-c-format
 msgid ""
 "Do not load the VGA16 framebuffer required for doing text-mode installation "
@@ -16962,31 +16925,46 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3233
+#: Kickstart2.xml:3253
 #, no-c-format
 msgid "Do not load support for firewire devices."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3240
+#: Kickstart2.xml:3260
 #, no-c-format
 msgid "noipv6"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3242
+#: Kickstart2.xml:3262
 #, no-c-format
 msgid "Disable IPv6 networking during installation."
 msgstr ""
 
+#. Tag: title
+#: Kickstart2.xml:3266
+#, no-c-format
+msgid "This option is not available during PXE installations"
+msgstr ""
+
+#. Tag: para
+#: Kickstart2.xml:3267
+#, no-c-format
+msgid ""
+"During installations from a PXE server, IPv6 networking might become active "
+"before <application>anaconda</application> processes the Kickstart file. If "
+"so, this option will have no effect during installation."
+msgstr ""
+
 #. Tag: command
-#: Kickstart2.xml:3249
+#: Kickstart2.xml:3275
 #, no-c-format
 msgid "nokill"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3251
+#: Kickstart2.xml:3277
 #, no-c-format
 msgid ""
 "A debugging option that prevents anaconda from terminating all running "
@@ -16994,32 +16972,32 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3258
+#: Kickstart2.xml:3284
 #, no-c-format
 msgid "nomount"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3260
+#: Kickstart2.xml:3286
 #, no-c-format
 msgid ""
 "Don't automatically mount any installed Linux partitions in rescue mode."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3269
+#: Kickstart2.xml:3295
 #, no-c-format
 msgid "Do not auto-probe network devices."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3278
+#: Kickstart2.xml:3304
 #, no-c-format
 msgid "Do not attempt to load support for parallel ports."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3287
+#: Kickstart2.xml:3313
 #, no-c-format
 msgid ""
 "Don't pass keyboard/mouse info to stage 2 installer, good for testing "
@@ -17028,43 +17006,43 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3296
+#: Kickstart2.xml:3322
 #, no-c-format
 msgid "Ignore PCMCIA controller in system."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3305
+#: Kickstart2.xml:3331
 #, no-c-format
 msgid "Do not attempt to detect hw, prompts user instead."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3314
+#: Kickstart2.xml:3340
 #, no-c-format
 msgid "Do not put a shell on tty2 during install."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3321
+#: Kickstart2.xml:3347
 #, no-c-format
 msgid "nostorage"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3323
+#: Kickstart2.xml:3349
 #, no-c-format
 msgid "Do not auto-probe storage devices (SCSI, IDE, RAID)."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3332
+#: Kickstart2.xml:3358
 #, no-c-format
 msgid "Do not load USB support (helps if install hangs early sometimes)."
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3341
+#: Kickstart2.xml:3367
 #, no-c-format
 msgid ""
 "Do not load usbstorage module in loader. May help with device ordering on "
@@ -17072,55 +17050,55 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3349
+#: Kickstart2.xml:3375
 #, no-c-format
 msgid "rescue"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3351
+#: Kickstart2.xml:3377
 #, no-c-format
 msgid "Run rescue environment."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3358
+#: Kickstart2.xml:3384
 #, no-c-format
 msgid "resolution=<replaceable><mode></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3360
+#: Kickstart2.xml:3386
 #, no-c-format
 msgid "Run installer in mode specified, '1024x768' for example."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3367
+#: Kickstart2.xml:3393
 #, no-c-format
 msgid "serial"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3369
+#: Kickstart2.xml:3395
 #, no-c-format
 msgid "Turns on serial console support."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3376
+#: Kickstart2.xml:3402
 #, no-c-format
 msgid "skipddc"
 msgstr "skipddc"
 
 #. Tag: para
-#: Kickstart2.xml:3378
+#: Kickstart2.xml:3404
 #, no-c-format
 msgid "Skips DDC probe of monitor, may help if it's hanging system."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3385
+#: Kickstart2.xml:3411
 #, no-c-format
 msgid ""
 "syslog=<replaceable><host></replaceable>[:<replaceable><port></"
@@ -17128,7 +17106,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3387
+#: Kickstart2.xml:3413
 #, no-c-format
 msgid ""
 "Once installation is up and running, send log messages to the syslog process "
@@ -17138,55 +17116,55 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3396
+#: Kickstart2.xml:3422
 #, no-c-format
 msgid "Force text mode install."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3405
+#: Kickstart2.xml:3431
 #, no-c-format
 msgid "updates"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3407
+#: Kickstart2.xml:3433
 #, no-c-format
 msgid "Prompt for floppy containing updates (bug fixes)."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3414
+#: Kickstart2.xml:3440
 #, no-c-format
 msgid "updates=ftp://<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3416
+#: Kickstart2.xml:3442
 #, no-c-format
 msgid "Image containing updates over FTP."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3423
+#: Kickstart2.xml:3449
 #, no-c-format
 msgid "updates=http://<replaceable><path></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3425
+#: Kickstart2.xml:3451
 #, no-c-format
 msgid "Image containing updates over HTTP."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3432
+#: Kickstart2.xml:3458
 #, no-c-format
 msgid "upgradeany"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3434
+#: Kickstart2.xml:3460
 #, no-c-format
 msgid ""
 "Don't require an /etc/redhat-release that matches the expected syntax to "
@@ -17194,7 +17172,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3443
+#: Kickstart2.xml:3469
 #, no-c-format
 msgid ""
 "Enable vnc-based installation. You will need to connect to the machine using "
@@ -17202,7 +17180,7 @@ msgid ""
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3450
+#: Kickstart2.xml:3476
 #, no-c-format
 msgid ""
 "vncconnect=<replaceable><host></replaceable>[:<replaceable><port>"
@@ -17210,7 +17188,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3452
+#: Kickstart2.xml:3478
 #, no-c-format
 msgid ""
 "Once installation is up and running, connect to the vnc client named "
@@ -17219,19 +17197,19 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3456 Kickstart2.xml:3469
+#: Kickstart2.xml:3482 Kickstart2.xml:3495
 #, no-c-format
 msgid "Requires 'vnc' option to be specified as well."
 msgstr ""
 
 #. Tag: command
-#: Kickstart2.xml:3463
+#: Kickstart2.xml:3489
 #, no-c-format
 msgid "vncpassword=<replaceable><password></replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Kickstart2.xml:3465
+#: Kickstart2.xml:3491
 #, no-c-format
 msgid ""
 "Enable a password for the vnc connection. This will prevent someone from "
@@ -18241,37 +18219,38 @@ msgid ""
 "command>, <command>find</command>, <command>findfs</command>, <command>fold</"
 "command>, <command>free</command>, <command>freeramdisk</command>, "
 "<command>fsck</command>, <command>fsck.ext2</command>, <command>fsck.ext3</"
-"command>, <command>fsck.minix</command>, <command>ftpget</command>, "
-"<command>ftpput</command>, <command>fuser</command>, <command>getopt</"
-"command>, <command>getty</command>, <command>grep</command>, "
-"<command>gunzip</command>, <command>gzip</command>, <command>hdparm</"
-"command>, <command>head</command>, <command>hexdump</command>, "
-"<command>hostid</command>, <command>hostname</command>, <command>httpd</"
-"command>, <command>hush</command>, <command>hwclock</command>, <command>id</"
-"command>, <command>ifconfig</command>, <command>ifdown</command>, "
-"<command>ifup</command>, <command>inetd</command>, <command>insmod</"
-"command>, <command>install</command>, <command>ip</command>, "
-"<command>ipaddr</command>, <command>ipcalc</command>, <command>ipcrm</"
-"command>, <command>ipcs</command>, <command>iplink</command>, "
-"<command>iproute</command>, <command>iptunnel</command>, <command>kill</"
-"command>, <command>killall</command>, <command>lash</command>, "
-"<command>last</command>, <command>length</command>, <command>less</command>, "
-"<command>linux32</command>, <command>linux64</command>, <command>ln</"
-"command>, <command>load_policy</command>, <command>loadfont</command>, "
-"<command>loadkmap</command>, <command>login</command>, <command>logname</"
-"command>, <command>losetup</command>, <command>ls</command>, "
-"<command>lsattr</command>, <command>lsmod</command>, <command>lzmacat</"
-"command>, <command>makedevs</command>, <command>md5sum</command>, "
-"<command>mdev</command>, <command>mesg</command>, <command>mkdir</command>, "
-"<command>mke2fs</command>, <command>mkfifo</command>, <command>mkfs.ext2</"
-"command>, <command>mkfs.ext3</command>, <command>mkfs.minix</command>, "
-"<command>mknod</command>, <command>mkswap</command>, <command>mktemp</"
-"command>, <command>modprobe</command>, <command>more</command>, "
-"<command>mount</command>, <command>mountpoint</command>, <command>msh</"
-"command>, <command>mt</command>, <command>mv</command>, <command>nameif</"
-"command>, <command>nc</command>, <command>netstat</command>, <command>nice</"
-"command>, <command>nohup</command>, <command>nslookup</command>, "
-"<command>od</command>, <command>openvt</command>, <command>passwd</command>, "
+"command>, <command>fsck.ext4</command>, <command>fsck.minix</command>, "
+"<command>ftpget</command>, <command>ftpput</command>, <command>fuser</"
+"command>, <command>getopt</command>, <command>getty</command>, "
+"<command>grep</command>, <command>gunzip</command>, <command>gzip</command>, "
+"<command>hdparm</command>, <command>head</command>, <command>hexdump</"
+"command>, <command>hostid</command>, <command>hostname</command>, "
+"<command>httpd</command>, <command>hush</command>, <command>hwclock</"
+"command>, <command>id</command>, <command>ifconfig</command>, "
+"<command>ifdown</command>, <command>ifup</command>, <command>inetd</"
+"command>, <command>insmod</command>, <command>install</command>, "
+"<command>ip</command>, <command>ipaddr</command>, <command>ipcalc</command>, "
+"<command>ipcrm</command>, <command>ipcs</command>, <command>iplink</"
+"command>, <command>iproute</command>, <command>iptunnel</command>, "
+"<command>kill</command>, <command>killall</command>, <command>lash</"
+"command>, <command>last</command>, <command>length</command>, <command>less</"
+"command>, <command>linux32</command>, <command>linux64</command>, "
+"<command>ln</command>, <command>load_policy</command>, <command>loadfont</"
+"command>, <command>loadkmap</command>, <command>login</command>, "
+"<command>logname</command>, <command>losetup</command>, <command>ls</"
+"command>, <command>lsattr</command>, <command>lsmod</command>, "
+"<command>lzmacat</command>, <command>makedevs</command>, <command>md5sum</"
+"command>, <command>mdev</command>, <command>mesg</command>, <command>mkdir</"
+"command>, <command>mke2fs</command>, <command>mkfifo</command>, "
+"<command>mkfs.ext2</command>, <command>mkfs.ext3</command>, <command>mkfs."
+"ext4</command>, <command>mkfs.minix</command>, <command>mknod</command>, "
+"<command>mkswap</command>, <command>mktemp</command>, <command>modprobe</"
+"command>, <command>more</command>, <command>mount</command>, "
+"<command>mountpoint</command>, <command>msh</command>, <command>mt</"
+"command>, <command>mv</command>, <command>nameif</command>, <command>nc</"
+"command>, <command>netstat</command>, <command>nice</command>, "
+"<command>nohup</command>, <command>nslookup</command>, <command>od</"
+"command>, <command>openvt</command>, <command>passwd</command>, "
 "<command>patch</command>, <command>pidof</command>, <command>ping</command>, "
 "<command>ping6</command>, <command>pipe_progress</command>, "
 "<command>pivot_root</command>, <command>printenv</command>, <command>printf</"
@@ -18534,22 +18513,6 @@ msgid ""
 "\"/> for information on how to start the kickstart installation."
 msgstr ""
 
-#. Tag: title
-#: Language_Selection_common-note-1-Fedora.xml:6
-#, fuzzy, no-c-format
-msgid "Installing from Fedora Live Media"
-msgstr "Instalowanie z innego ÅºrÃ³dÅ‚a"
-
-#. Tag: para
-#: Language_Selection_common-note-1-Fedora.xml:7
-#, no-c-format
-msgid ""
-"If you install from Fedora Live Media, you may not see a locale selection "
-"screen. For additional locale support, use the <application>Add/Remove "
-"Software</application> application after you boot your newly installed "
-"Fedora system, following installation."
-msgstr ""
-
 #. Tag: para
 #: Language_Selection_common-para-1.xml:5
 #, no-c-format
@@ -18626,32 +18589,540 @@ msgid "Replace <command>X</command> with the corresponding disc number."
 msgstr ""
 
 #. Tag: title
-#: medialess.xml:7
+#: Making_USB_media.xml:7
 #, no-c-format
-msgid "Installing Without Media"
-msgstr "Instalowanie bez noÅ›nikÃ³w"
+msgid "Making USB Media"
+msgstr "Tworzenie noÅ›nika USB"
 
 #. Tag: para
-#: medialess.xml:8
+#: Making_USB_media.xml:8
 #, no-c-format
 msgid ""
-"This section discusses how to install Fedora to your system without making "
-"any additional physical media. Instead, you can use your existing "
-"<application>GRUB</application> boot loader to start the installation "
-"program."
+"To make bootable USB media, use a Fedora Live image. Use either a Windows or "
+"Linux system to make the bootable USB media."
+msgstr ""
+"Aby utworzyÄ‡ startowy noÅ›nik USB, uÅ¼yj obrazu Live Fedory. UÅ¼yj systemu "
+"Windows lub Linux."
+
+#. Tag: title
+#: Making_USB_media.xml:12
+#, no-c-format
+msgid "USB Image Writing is Nondestructive"
+msgstr "Zapisywanie obrazu na USB nie uszkadza danych"
+
+#. Tag: para
+#: Making_USB_media.xml:13
+#, no-c-format
+msgid ""
+"Writing the Live image to the USB media is <emphasis>nondestructive</"
+"emphasis>. Any existing data on the media is not harmed."
+msgstr ""
+"Zapisywanie obrazu Live na noÅ›niku USB <emphasis>nie uszkadza danych</"
+"emphasis>. Å»adne istniejÄ…ce dane na noÅ›niku nie zostanÄ… uszkodzone."
+
+#. Tag: emphasis
+#: Making_USB_media.xml:17
+#, no-c-format
+msgid ""
+"It is always a good idea to back up important data before performing "
+"sensitive disk operations."
+msgstr ""
+"Zawsze jest dobrze wykonaÄ‡ kopiÄ™ zapasowÄ… waÅ¼nych danych przed "
+"przeprowadzeniem duÅ¼ych operacji na dysku."
+
+#. Tag: para
+#: Making_USB_media.xml:20
+#, no-c-format
+msgid ""
+"To begin, make sure there is sufficient free space available on the USB "
+"media. There is no need to repartition or reformat your media. <emphasis>It "
+"is always a good idea to back up important data before performing sensitive "
+"disk operations.</emphasis>"
+msgstr ""
+"Aby zaczÄ…Ä‡, upewnij siÄ™, Å¼e na noÅ›niku USB jest wystarczajÄ…ca iloÅ›Ä‡ wolnego "
+"miejsca. Nie musisz ponownie partycjonowaÄ‡ lub formatowaÄ‡ noÅ›nika. "
+"<emphasis>Zawsze jest dobrze wykonaÄ‡ kopiÄ™ zapasowÄ… waÅ¼nych danych przed "
+"przeprowadzeniem duÅ¼ych operacji na dysku.</emphasis>"
+
+#. Tag: title
+#: Making_USB_media.xml:24
+#, no-c-format
+msgid "USB Image Creation from Windows"
+msgstr "Tworzenie obrazu USB w Windows"
+
+#. Tag: para
+#: Making_USB_media.xml:27
+#, fuzzy, no-c-format
+msgid ""
+"Download the <application>LiveUSB Creator</application> program for Windows "
+"from <ulink url=\"http://fedorahosted.org/liveusb-creator\"></ulink>."
+msgstr ""
+"Pobierz program <application>liveusb-creator</application> dla Windows na "
+"<ulink url=\"http://fedorahosted.org/liveusb-creator\"/>."
+
+#. Tag: para
+#: Making_USB_media.xml:32 Making_USB_media.xml:108
+#, no-c-format
+msgid ""
+"<application>LiveUSB Creator</application> can create live USB media either "
+"from an image file that you downloaded previously, as described in <xref "
+"linkend=\"sn-which-files\"/>, or it can download an image file from the "
+"Internet. Either:"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:37 Making_USB_media.xml:113
+#, no-c-format
+msgid ""
+"click the <guibutton>Browse</guibutton> button under the <guilabel>Use "
+"existing LiveCD</guilabel> label, browse to the location where you "
+"previously downloaded a Fedora Live ISO file, and select that file."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:42 Making_USB_media.xml:118
+#, no-c-format
+msgid ""
+"select a Fedora Live ISO file from the drop-down menu that "
+"<application>LiveUSB Creator</application> presents under the "
+"<guilabel>Download Fedora</guilabel> label. Note that image files are large "
+"and that it is probably impractical to use <application>LiveUSB Creator</"
+"application> to download an image file if you do not have a broadband "
+"connection to the Internet."
 msgstr ""
-"Ta sekcja omawia instalacjÄ™ Fedory bez uÅ¼ywania dodatkowych noÅ›nikÃ³w "
-"fizycznych. Zamiast tego moÅ¼na uÅ¼yÄ‡ istniejÄ…cego programu startowego "
-"<application>GRUB</application>, aby uruchomiÄ‡ program instalacyjny."
+
+#. Tag: para
+#: Making_USB_media.xml:49 Making_USB_media.xml:125
+#, fuzzy, no-c-format
+msgid "Click <guibutton>Create Live USB</guibutton>."
+msgstr ""
+"Po podjÄ™ciu decyzji naciÅ›nij <guibutton>Dalej</guibutton>, aby kontynuowaÄ‡."
 
 #. Tag: title
-#: medialess.xml:13
+#: Making_USB_media.xml:56
+#, no-c-format
+msgid "USB Image Creation in Linux"
+msgstr "Tworzenie obrazu USB w Linuksie"
+
+#. Tag: para
+#: Making_USB_media.xml:57
+#, no-c-format
+msgid ""
+"USB media often comes in the form of flash devices sometimes called "
+"<firstterm>pen drives</firstterm>, <firstterm>thumb disks</firstterm>, or "
+"<firstterm>keys</firstterm>; or as an externally connected hard disk device. "
+"Almost all media of this type is formatted as a vfat file system. You can "
+"create bootable USB media on media formatted as ext2, ext3, or vfat."
+msgstr ""
+"NoÅ›niki USB czÄ™sto wystÄ™pujÄ… w formie urzÄ…dzeÅ„ flash, nazywanych czasami "
+"<firstterm>pendrive'ami</firstterm> lub <firstterm>kluczami</firstterm>, "
+"albo jako zewnÄ™trznie podÅ‚Ä…czane urzÄ…dzenie dysku twardego. Prawie wszystkie "
+"noÅ›niku tego typu sÄ… sformatowane jako system plikÃ³w VFAT. MoÅ¼na utworzyÄ‡ "
+"startowe noÅ›niki USB na noÅ›nikach sformatowanych jako ext2, ext3 lub VFAT."
+
+#. Tag: para
+#: Making_USB_media.xml:62
+#, no-c-format
+msgid ""
+"The <application>GRUB</application> bootloader does not support Btrfs file "
+"system. You cannot create bootable USB media on media formatted as Btrfs."
+msgstr ""
+
+#. Tag: title
+#: Making_USB_media.xml:67
+#, no-c-format
+msgid "Unusual USB Media"
+msgstr "Inny noÅ›nik USB"
+
+#. Tag: para
+#: Making_USB_media.xml:68
+#, no-c-format
+msgid ""
+"In a few cases with oddly formatted or partitioned USB media, the image "
+"writing may fail."
+msgstr ""
+"W niektÃ³rych przypadkach na nietypowo sformatowanych lub spartycjonowanych "
+"noÅ›nikach USB zapisywanie obrazu moÅ¼e siÄ™ nie powieÅ›Ä‡."
+
+#. Tag: para
+#: Making_USB_media.xml:72
+#, no-c-format
+msgid ""
+"Follow one of the following procedures, depending on which Linux "
+"distribution you use:"
+msgstr ""
+
+#. Tag: title
+#: Making_USB_media.xml:76
+#, no-c-format
+msgid ""
+"Live USB creation in Fedora, Red Hat Enterprise Linux, and similar Linux "
+"distributions"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:77
+#, no-c-format
+msgid ""
+"Graphical and command-line tools are available to create Fedora live USB "
+"media on computers that run Fedora, Red Hat Enterprise Linux, and Linux "
+"distributions derived from Red Hat Enterprise Linux."
+msgstr ""
+
+#. Tag: title
+#: Making_USB_media.xml:81
+#, no-c-format
+msgid "Red Hat Enterprise Linux and similar operating systems"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:84
+#, no-c-format
+msgid ""
+"To perform this procedure on Red Hat Enterprise Linux and Linux "
+"distributions derived from it, enable the <firstterm>Extra Packages for "
+"Enterprise Linux</firstterm> (EPEL) repository. Refer to <ulink url=\"http://"
+"fedoraproject.org/wiki/EPEL/FAQ#howtouse\"></ulink> for instructions."
+msgstr ""
+
+#. Tag: title
+#: Making_USB_media.xml:89
+#, no-c-format
+msgid "Live USB creation with a graphical tool"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:92
+#, fuzzy, no-c-format
+msgid ""
+"Install the <package>liveusb-creator</package> on your system with your "
+"graphical package manager, or the following command:"
+msgstr ""
+"Zainstaluj pakiet <package>livecd-tools</package> w systemie. W systemach "
+"Fedora uÅ¼yj nastÄ™pujÄ…cego polecenia:"
+
+#. Tag: screen
+#: Making_USB_media.xml:95
+#, no-c-format
+msgid "<![CDATA[su -c 'yum -y install liveusb-creator']]>"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:98 Making_USB_media.xml:141 Making_USB_media.xml:185
+#, no-c-format
+msgid "Plug in your USB media."
+msgstr "PodÅ‚Ä…cz noÅ›nik USB."
+
+#. Tag: para
+#: Making_USB_media.xml:103
+#, no-c-format
+msgid ""
+"Launch <application>LiveUSB Creator</application>, either from a menu or by "
+"entering <command>liveusb-creator</command> on the command line. Enter the "
+"root password for your system when <application>LiveUSB Creator</"
+"application> prompts you for it."
+msgstr ""
+
+#. Tag: title
+#: Making_USB_media.xml:132
+#, no-c-format
+msgid "Live USB creation with a command-line tool"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:146 Making_USB_media.xml:190
+#, no-c-format
+msgid ""
+"Find the device name for your USB media. If the media has a volume name, "
+"look up the name in <filename class=\"directory\">/dev/disk/by-label</"
+"filename>, or use the <command>findfs</command>:"
+msgstr ""
+"ZnajdÅº nazwÄ™ urzÄ…dzenia noÅ›nika USB. JeÅ›li noÅ›nik posiada nazwÄ™ woluminu, "
+"poszukaj nazwy w <filename class=\"directory\">/dev/disk/by-label</filename> "
+"lub uÅ¼yj <command>findfs</command>:"
+
+#. Tag: screen
+#: Making_USB_media.xml:149 Making_USB_media.xml:193
+#, no-c-format
+msgid ""
+"<![CDATA[su -c 'findfs LABEL=\"]]><replaceable>MyLabel</replaceable><![CDATA"
+"[\"']]>"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:150 Making_USB_media.xml:194
+#, no-c-format
+msgid ""
+"If the media does not have a volume name, or you do not know it, consult the "
+"<filename>/var/log/messages</filename> log for details:"
+msgstr ""
+"JeÅ›li noÅ›nik nie posiada nazwy woluminu lub jej nie znasz, sprawdÅº plik "
+"<filename>/var/log/messages</filename>, aby uzyskaÄ‡ szczegÃ³Å‚y:"
+
+#. Tag: screen
+#: Making_USB_media.xml:153 Making_USB_media.xml:197
+#, no-c-format
+msgid "<![CDATA[su -c 'less /var/log/messages']]>"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:156
+#, no-c-format
+msgid ""
+"Use the <command>livecd-iso-to-disk</command> command to write the ISO image "
+"to the media:"
+msgstr ""
+"UÅ¼yj polecenia <command>livecd-iso-to-disk</command>, aby zapisaÄ‡ obraz ISO "
+"na noÅ›niku:"
+
+#. Tag: screen
+#: Making_USB_media.xml:159
+#, no-c-format
+msgid ""
+"<![CDATA[su -c 'livecd-iso-to-disk ]]><replaceable>the_image.iso</"
+"replaceable><![CDATA[ /dev/]]><replaceable>sdX1</replaceable><![CDATA[']]>"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:160
+#, no-c-format
+msgid ""
+"Replace <replaceable>sdX1</replaceable> with the device name for the "
+"partition on the USB media. Most flash drives and external hard disks use "
+"only one partition. If you have changed this behavior or have oddly "
+"partitioned media, you may need to consult other sources of help."
+msgstr ""
+"ZastÄ…p <replaceable>sdX1</replaceable> nazwÄ… urzÄ…dzenia dla partycji na "
+"noÅ›niku USB. WiÄ™kszoÅ›Ä‡ dyskÃ³w USB i zewnÄ™trznych dyskÃ³w twardych uÅ¼ywa tylko "
+"jednej partycji. JeÅ›li zmieniÅ‚eÅ› to zachowanie lub posiadasz nietypowo "
+"spartycjonowany noÅ›nik USB, musisz sprawdziÄ‡ inne ÅºrÃ³dÅ‚a pomocy."
+
+#. Tag: title
+#: Making_USB_media.xml:168
+#, fuzzy, no-c-format
+msgid "Live USB creation in other Linux distributions"
+msgstr "Ustawianie dystrybucji"
+
+#. Tag: para
+#: Making_USB_media.xml:169
+#, no-c-format
+msgid ""
+"To create Fedora live USB media on a computer that uses a Linux distribution "
+"other than Fedora, Red Hat Enterprise Linux, and those derived from Red Hat "
+"Enterprise Linux, you can either find a graphical tool designed for your "
+"operating system or use the command-line procedure detailed in this section."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:172
+#, no-c-format
+msgid ""
+"<application>UNetbootin</application> is a free and open-source graphical "
+"tool that can create live USB media from live image files on computers that "
+"use a wide range of different Linux distributions. The Fedora Project does "
+"not distribute <application>UNetbootin</application> — it is available "
+"from <ulink url=\"http://unetbootin.sourceforge.net/\"></ulink>. Refer to "
+"that website for a complete description of the tool and instructions on how "
+"to use it."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:175
+#, no-c-format
+msgid "To create Fedora live USB media at the command line:"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:180
+#, no-c-format
+msgid "Download a live ISO file for Fedora as shown in"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:200
+#, no-c-format
+msgid ""
+"Many Linux distributions automatically <firstterm>mount</firstterm> USB "
+"media devices when you connect the device to your computer. If this is the "
+"case, dismount the device. The specific method to do this varies widely "
+"between Linux distributions and desktops. Some common methods include:"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:205
+#, no-c-format
+msgid ""
+"select <guilabel>File > Unmount</guilabel> if the operating system "
+"presents you with a window that displays the contents of the device."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:210
+#, no-c-format
+msgid ""
+"right-click on an icon of the device and click <guilabel>Unmount</guilabel>."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:215
+#, no-c-format
+msgid ""
+"click on an icon that represents ejecting the media — commonly, an "
+"upward-pointing triangle."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:222
+#, no-c-format
+msgid ""
+"At a command line, type <command>su -</command> to become root, and enter "
+"the root password when your system prompts you."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:227
+#, no-c-format
+msgid ""
+"Create a <firstterm>mount point</firstterm> for the live image that you "
+"downloaded. For example, to use <filename>/tmp/livecd</filename> as the "
+"mount point, type <command>mkdir /tmp/livecd</command> and press "
+"<keycap>Enter</keycap>."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:232
+#, no-c-format
+msgid ""
+"Mount the live image with the following command: <command>mount -o loop "
+"<replaceable>/path/to/image/file/imagefile.iso</replaceable> <replaceable>/"
+"path/to/mount/point</replaceable></command>, where <replaceable>/path/to/"
+"image/file</replaceable> is the location of the image file that you "
+"downloaded, <filename>imagefile.iso</filename> is the image file, and "
+"<replaceable>/path/to/mount/point</replaceable> is the mount point that you "
+"just created."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:237
+#, no-c-format
+msgid ""
+"Change directory to the <filename>LiveOS</filename> directory of the image "
+"that you just mounted. mount point where you just mounted the Fedora live "
+"image. For example, <command>cd /tmp/livecd/LiveOS</command>."
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:242
+#, no-c-format
+msgid ""
+"Run the following command: <command>./livecd-iso-to-disk <replaceable>/path/"
+"to/image/file/imagefile.iso</replaceable> <replaceable>device</replaceable></"
+"command>, where <filename><replaceable>/path/to/image/file</replaceable></"
+"filename> is the location of the image file that you downloaded, "
+"<filename><replaceable>imagefile.iso</replaceable></filename> is the image "
+"file, and <filename><replaceable>device</replaceable></filename> is the USB "
+"media device."
+msgstr ""
+
+#. Tag: title
+#: Making_USB_media.xml:249
+#, no-c-format
+msgid ""
+"Mounting a Fedora live image file and using livecd-iso-to-disk to create "
+"live USB media"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:250
+#, no-c-format
+msgid ""
+"You have downloaded a Fedora live image, <filename>Fedora-&PRODVER;-i686-"
+"Live.iso</filename>, to a folder named <filename>Downloads</filename> in "
+"your home directory. You have a USB flash drive plugged into your computer, "
+"named <filename>/dev/sdc1</filename>"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:253
+#, no-c-format
+msgid "Become root:"
+msgstr ""
+
+#. Tag: screen
+#: Making_USB_media.xml:256
+#, no-c-format
+msgid "su -"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:257
+#, no-c-format
+msgid "Make a mount point for the image:"
+msgstr ""
+
+#. Tag: screen
+#: Making_USB_media.xml:260
+#, no-c-format
+msgid "mkdir /mnt/livecd"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:261
+#, no-c-format
+msgid "Mount the image:"
+msgstr ""
+
+#. Tag: screen
+#: Making_USB_media.xml:264
+#, no-c-format
+msgid ""
+"mount -o loop /home/<replaceable>Username</replaceable>/Downloads/Fedora-"
+"&PRODVER;-i686-Live.iso /mnt/livecd"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:265
+#, no-c-format
+msgid ""
+"Change into the <filename>LiveOS</filename> directory of the live CD image:"
+msgstr ""
+
+#. Tag: screen
+#: Making_USB_media.xml:268
+#, no-c-format
+msgid "cd /mnt/livecd/LiveOS"
+msgstr ""
+
+#. Tag: para
+#: Making_USB_media.xml:269
+#, no-c-format
+msgid ""
+"Run <application>livecd-iso-to-disk</application> to transfer the live image "
+"to your flash drive and make the flash drive bootable:"
+msgstr ""
+
+#. Tag: screen
+#: Making_USB_media.xml:272
+#, no-c-format
+msgid ""
+"./livecd-iso-to-disk /home/<replaceable>Username</replaceable>/Downloads/"
+"Fedora-&PRODVER;-i686-Live.iso /dev/sdc1"
+msgstr ""
+
+#. Tag: title
+#: medialess.xml:7
+#, no-c-format
+msgid "Installing Without Media"
+msgstr "Instalowanie bez noÅ›nikÃ³w"
+
+#. Tag: title
+#: medialess.xml:9
 #, no-c-format
 msgid "Linux Required"
 msgstr "Linux jest wymagany"
 
 #. Tag: para
-#: medialess.xml:14
+#: medialess.xml:10
 #, no-c-format
 msgid ""
 "This procedure assumes you are already using Fedora or another relatively "
@@ -18663,14 +19134,38 @@ msgstr ""
 "application>. Przyjmuje takÅ¼e, Å¼e jesteÅ› choÄ‡ trochÄ™ doÅ›wiadczonym "
 "uÅ¼ytkownikiem Linuksa."
 
-#. Tag: title
+#. Tag: para
+#: medialess.xml:16
+#, no-c-format
+msgid ""
+"If you have an earlier version of Fedora installed on your system, you might "
+"be able to upgrade to Fedora &PRODVER; without making additional physical "
+"media by using the <application>preupgrade</application> tool. Refer to "
+"<xref linkend=\"ch-upgrade-x86\"/> for details of using "
+"<application>preupgrade</application>."
+msgstr ""
+
+#. Tag: para
 #: medialess.xml:20
 #, no-c-format
+msgid ""
+"This section discusses how to install Fedora to your system without making "
+"any additional physical media. Instead, you can use your existing "
+"<application>GRUB</application> boot loader to start the installation "
+"program."
+msgstr ""
+"Ta sekcja omawia instalacjÄ™ Fedory bez uÅ¼ywania dodatkowych noÅ›nikÃ³w "
+"fizycznych. Zamiast tego moÅ¼na uÅ¼yÄ‡ istniejÄ…cego programu startowego "
+"<application>GRUB</application>, aby uruchomiÄ‡ program instalacyjny."
+
+#. Tag: title
+#: medialess.xml:25
+#, no-c-format
 msgid "Retrieving Boot Files"
 msgstr "Pobieranie plikÃ³w startowych"
 
 #. Tag: para
-#: medialess.xml:21
+#: medialess.xml:26
 #, no-c-format
 msgid ""
 "To perform an installation without media or a PXE server, your system must "
@@ -18680,19 +19175,19 @@ msgstr ""
 "dwa pliki przechowywane lokalnie: jÄ…dro i poczÄ…tkowy dysk RAM."
 
 #. Tag: para
-#: medialess.xml:26
+#: medialess.xml:31
 #, fuzzy, no-c-format
 msgid ""
 "Download a Live image or DVD distribution, or to locate an installation "
 "mirror, visit <ulink url=\"http://mirrors.fedoraproject.org/publiclist/"
-"Fedora/11/\"></ulink>."
+"Fedora/12/\"></ulink>."
 msgstr ""
 "Aby pobraÄ‡ obraz Live lub dystrybucjÄ™ DVD lub ustaliÄ‡ poÅ‚oÅ¼enie serwera "
 "lustrzanego instalacji, odwiedÅº <ulink url=\"http://mirrors.fedoraproject."
 "org/publiclist/Fedora/10/\"/>."
 
 #. Tag: para
-#: medialess.xml:30
+#: medialess.xml:35
 #, no-c-format
 msgid ""
 "Locate the <filename class=\"directory\">isolinux/</filename> folder using "
@@ -18702,7 +19197,7 @@ msgstr ""
 "uÅ¼ywajÄ…c jednej z nastÄ™pujÄ…cych metod:"
 
 #. Tag: para
-#: medialess.xml:35
+#: medialess.xml:40
 #, no-c-format
 msgid ""
 "If you chose to download an image, open it with the appropriate desktop "
@@ -18716,12 +19211,12 @@ msgstr ""
 "<filename class=\"directory\">isolinux/</filename>."
 
 #. Tag: para
-#: medialess.xml:43
+#: medialess.xml:48
 #, fuzzy, no-c-format
 msgid ""
 "If you chose not to download a whole image because you wish to install via "
 "the network, locate the desired release. In general, once you find a "
-"suitable mirror, browse to the <filename>releases/11/Fedora/"
+"suitable mirror, browse to the <filename>releases/&PRODVER;/Fedora/"
 "<replaceable>arch</replaceable>/os/isolinux/</filename> folder."
 msgstr ""
 "JeÅ›li zdecydowaÅ‚eÅ›, Å¼e nie pobierzesz caÅ‚ego obrazu, poniewaÅ¼ chcesz "
@@ -18731,13 +19226,13 @@ msgstr ""
 "os/isolinux/</filename>."
 
 #. Tag: title
-#: medialess.xml:52
+#: medialess.xml:57
 #, no-c-format
 msgid "Installation Types Available"
 msgstr "DostÄ™pne typy instalacji"
 
 #. Tag: para
-#: medialess.xml:53
+#: medialess.xml:58
 #, no-c-format
 msgid ""
 "If you download an image, you may then choose a hard disk-based installation "
@@ -18749,7 +19244,7 @@ msgstr ""
 "lustrzanego, moÅ¼na przeprowadziÄ‡ tylko instalacjÄ™ sieciowÄ…."
 
 #. Tag: para
-#: medialess.xml:60
+#: medialess.xml:65
 #, no-c-format
 msgid ""
 "Copy the <filename>vmlinuz</filename> and <filename>initrd.img</filename> "
@@ -18767,13 +19262,13 @@ msgstr ""
 "folderu <filename class=\"directory\">/boot/</filename>."
 
 #. Tag: title
-#: medialess.xml:73
+#: medialess.xml:78
 #, no-c-format
 msgid "Editing the <application>GRUB</application> Configuration"
 msgstr "Modyfikowanie konfiguracji <application>GRUB-a</application>"
 
 #. Tag: para
-#: medialess.xml:75
+#: medialess.xml:80
 #, no-c-format
 msgid ""
 "The <application>GRUB</application> boot loader uses the configuration file "
@@ -18788,13 +19283,13 @@ msgstr ""
 "nich odnosiÅ‚."
 
 #. Tag: para
-#: medialess.xml:81
+#: medialess.xml:86
 #, no-c-format
 msgid "A minimal boot stanza looks like the following listing:"
 msgstr "Minimalny wpis startowy wyglÄ…da tak, jak na poniÅ¼szym przykÅ‚adzie:"
 
 #. Tag: screen
-#: medialess.xml:82
+#: medialess.xml:87
 #, no-c-format
 msgid ""
 "<![CDATA[title Installation\n"
@@ -18804,7 +19299,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: medialess.xml:83
+#: medialess.xml:88
 #, no-c-format
 msgid ""
 "You may wish to add options to the end of the <option>kernel</option> line "
@@ -18820,37 +19315,37 @@ msgstr ""
 "admin-options\"/>."
 
 #. Tag: para
-#: medialess.xml:89
+#: medialess.xml:94
 #, no-c-format
 msgid "The following options are generally useful for medialess installations:"
 msgstr "PoniÅ¼sze opcje sÄ… zwykle przydatne dla instalacji bez noÅ›nikÃ³w:"
 
 #. Tag: option
-#: medialess.xml:93
+#: medialess.xml:98
 #, no-c-format
 msgid "<option>ip=</option>"
 msgstr ""
 
 #. Tag: option
-#: medialess.xml:96
+#: medialess.xml:101
 #, no-c-format
-msgid "method="
-msgstr "method="
+msgid "repo="
+msgstr ""
 
 #. Tag: option
-#: medialess.xml:99
+#: medialess.xml:104
 #, no-c-format
 msgid "lang="
 msgstr "lang="
 
 #. Tag: option
-#: medialess.xml:102
+#: medialess.xml:107
 #, no-c-format
 msgid "keymap="
 msgstr "keymap="
 
 #. Tag: para
-#: medialess.xml:105
+#: medialess.xml:110
 #, no-c-format
 msgid ""
 "<option>ksdevice=</option> (if installation requires an interface other than "
@@ -18860,7 +19355,7 @@ msgstr ""
 "eth0)"
 
 #. Tag: para
-#: medialess.xml:109
+#: medialess.xml:114
 #, no-c-format
 msgid ""
 "<option>vnc</option> and <option>vncpassword=</option> for a remote "
@@ -18870,7 +19365,7 @@ msgstr ""
 "instalacjÄ™ zdalnÄ…"
 
 #. Tag: para
-#: medialess.xml:113
+#: medialess.xml:118
 #, no-c-format
 msgid ""
 "When you are finished, change the <option>default</option> option in "
@@ -18881,19 +19376,19 @@ msgstr ""
 "boot/grub/grub.conf</filename>, aby wskazywaÅ‚a na dodany nowy pierwszy wpis:"
 
 #. Tag: screen
-#: medialess.xml:116
+#: medialess.xml:121
 #, no-c-format
 msgid "<![CDATA[default 0]]>"
 msgstr ""
 
 #. Tag: title
-#: medialess.xml:119
+#: medialess.xml:124
 #, no-c-format
 msgid "Booting to Installation"
 msgstr "Uruchamianie instalacji"
 
 #. Tag: para
-#: medialess.xml:120
+#: medialess.xml:125
 #, no-c-format
 msgid ""
 "Reboot the system. <application>GRUB</application> boots the installation "
@@ -18932,6 +19427,12 @@ msgstr ""
 msgid "<secondary>diskless environment</secondary>"
 msgstr ""
 
+#. Tag: primary
+#: Netboot_DHCP.xml:17
+#, fuzzy, no-c-format
+msgid "<primary>PXE installations</primary>"
+msgstr "metoda instalacji"
+
 #. Tag: secondary
 #: Netboot_DHCP.xml:18 Netboot_DHCP.xml:23
 #, no-c-format
@@ -18954,13 +19455,15 @@ msgid ""
 "systems which support it:"
 msgstr ""
 
-#. Tag: computeroutput
+#. Tag: screen
 #: Netboot_DHCP.xml:31
 #, no-c-format
 msgid ""
-"allow booting; allow bootp; class \"pxeclients\" { match if substring(option "
-"vendor-class-identifier, 0, 9) = \"PXEClient\"; next-server <replaceable><"
-"server-ip></replaceable>; filename \"linux-install/pxelinux.0\"; }"
+"<computeroutput>allow booting; allow bootp; class \"pxeclients\" {    match "
+"if substring(option</computeroutput>\n"
+"<computeroutput>vendor-class-identifier, 0, 9) = \"PXEClient\";    next-"
+"server <replaceable><server-ip></replaceable>;</computeroutput>\n"
+"<computeroutput>filename \"linux-install/pxelinux.0\"; }</computeroutput>"
 msgstr ""
 
 #. Tag: para
@@ -18977,6 +19480,12 @@ msgstr ""
 msgid "Starting the <command>tftp</command> Server"
 msgstr ""
 
+#. Tag: command
+#: Netboot_TFTP.xml:7
+#, no-c-format
+msgid "tftp"
+msgstr ""
+
 #. Tag: para
 #: Netboot_TFTP.xml:11
 #, no-c-format
@@ -19017,6 +19526,12 @@ msgid "DHCP (Dynamic Host Configuration Protocol)"
 msgstr ""
 
 #. Tag: primary
+#: networkconfig-fedora.xml:16
+#, no-c-format
+msgid "IPv4"
+msgstr ""
+
+#. Tag: primary
 #: networkconfig-fedora.xml:19
 #, fuzzy, no-c-format
 msgid "hostname"
@@ -19059,20 +19574,29 @@ msgid ""
 "domain name, leaving the user to enter a hostname."
 msgstr ""
 
-#. Tag: title
+#. Tag: para
 #: networkconfig-fedora.xml:33
 #, no-c-format
+msgid ""
+"Unless you have a specific need to customize the host name and domain name, "
+"the default setting <literal>localhost.localdomain</literal> is a good "
+"choice for most users."
+msgstr ""
+
+#. Tag: title
+#: networkconfig-fedora.xml:37
+#, no-c-format
 msgid "<title>Setting the hostname</title>"
 msgstr ""
 
 #. Tag: para
-#: networkconfig-fedora.xml:36
+#: networkconfig-fedora.xml:40
 #, no-c-format
 msgid "<para>Setting the hostname</para>"
 msgstr ""
 
 #. Tag: para
-#: networkconfig-fedora.xml:43
+#: networkconfig-fedora.xml:47
 #, fuzzy, no-c-format
 msgid ""
 "To set up a network that is behind an Internet firewall or router, you may "
@@ -19087,8 +19611,22 @@ msgstr ""
 "komputer w sieci, powinieneÅ› nadaÄ‡ kaÅ¼demu oddzielnÄ… nazwÄ™ komputera w tej "
 "domenie."
 
+#. Tag: title
+#: networkconfig-fedora.xml:51
+#, fuzzy, no-c-format
+msgid "Valid Hostnames"
+msgstr "Nazwa komputera"
+
+#. Tag: para
+#: networkconfig-fedora.xml:52
+#, no-c-format
+msgid ""
+"You may give your system any name provided that the full hostname is unique. "
+"The hostname may include letters, numbers and hyphens."
+msgstr ""
+
 #. Tag: para
-#: networkconfig-fedora.xml:55
+#: networkconfig-fedora.xml:59
 #, fuzzy, no-c-format
 msgid ""
 "On some networks, the DHCP provider also provides the name of the computer, "
@@ -19112,7 +19650,23 @@ msgstr ""
 "\"><replaceable>przykÅ‚ad.pl</replaceable></systemitem>."
 
 #. Tag: para
-#: networkconfig-fedora.xml:69
+#: networkconfig-fedora.xml:63
+#, no-c-format
+msgid ""
+"If your Fedora system is connected <emphasis>directly</emphasis> to the "
+"Internet, you must pay attention to additional considerations to avoid "
+"service interruptions or risk action by your upstream service provider. A "
+"full discussion of these issues is beyond the scope of this document."
+msgstr ""
+
+#. Tag: title
+#: networkconfig-fedora.xml:72
+#, fuzzy, no-c-format
+msgid "Modem Configuration"
+msgstr "WybÃ³r strefy czasowej"
+
+#. Tag: para
+#: networkconfig-fedora.xml:73
 #, fuzzy, no-c-format
 msgid ""
 "The installation program does not configure modems. Configure these devices "
@@ -19126,13 +19680,13 @@ msgstr ""
 "dla danego dostawcy usÅ‚ug internetowych (ISP)."
 
 #. Tag: title
-#: networkconfig-fedora.xml:78
+#: networkconfig-fedora.xml:82
 #, fuzzy, no-c-format
 msgid "Manual configuration"
 msgstr "Konfiguracja modemu"
 
 #. Tag: para
-#: networkconfig-fedora.xml:79
+#: networkconfig-fedora.xml:83
 #, no-c-format
 msgid ""
 "Installations that require certain advanced configurations cannot succeed "
@@ -19143,19 +19697,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: networkconfig-fedora.xml:83
+#: networkconfig-fedora.xml:87
 #, no-c-format
 msgid "<title>Manual network configuration</title>"
 msgstr ""
 
 #. Tag: para
-#: networkconfig-fedora.xml:86
+#: networkconfig-fedora.xml:90
 #, fuzzy, no-c-format
 msgid "<para>Manual network configuration</para>"
 msgstr "Konfiguracja sieci"
 
 #. Tag: para
-#: networkconfig-fedora.xml:93
+#: networkconfig-fedora.xml:97
 #, no-c-format
 msgid ""
 "If your network does not have DHCP enabled, or if you need to override the "
@@ -19168,89 +19722,31 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: networkconfig-fedora.xml:97
+#: networkconfig-fedora.xml:101
 #, no-c-format
 msgid "Click <guilabel>OK</guilabel> to accept these settings and continue."
 msgstr ""
 
-#. Tag: para
-#: networkconfig.xml:11
-#, no-c-format
-msgid ""
-"Setup simply prompts for the hostname and the settings used during "
-"installation are written to the system. Many networks have a <indexterm> "
-"<primary>DHCP (Dynamic Host Configuration Protocol)</primary> </indexterm> "
-"<firstterm>DHCP</firstterm> (Dynamic Host Configuration Protocol) service "
-"that automatically supplies connected systems with domain name, leaving the "
-"user to enter a host name. By default, Fedora activates all network "
-"interfaces on your computer and configures them to use DHCP."
-msgstr ""
-
-#. Tag: para
-#: networkconfig.xml:22
-#, no-c-format
-msgid ""
-"Fedora contains support for both <firstterm>IPv4</firstterm> and "
-"<firstterm>IPv6</firstterm>. However, by default, Fedora configures network "
-"interfaces on your computer for IPv4, and to use DHCP via "
-"<application>NetworkManager</application>. Currently "
-"<application>NetworkManager</application> does not support IPv6. If your "
-"network only supports IPv6 you should use <application>system-config-"
-"network</application> after installation to configure your network "
-"interfaces."
-msgstr ""
-
-#. Tag: para
-#: networkconfig.xml:33
-#, no-c-format
-msgid ""
-"The installation program does not configure <indexterm> <primary>modem</"
-"primary> </indexterm> modems. Configure these devices after installation "
-"with the <application>Network</application> utility. The settings for your "
-"modem are specific to your particular Internet Service Provider (ISP)."
-msgstr ""
-
 #. Tag: title
-#: networkconfig.xml:44
-#, no-c-format
-msgid "Hostname"
-msgstr ""
+#: new-users.xml:7
+#, fuzzy, no-c-format
+msgid "Obtaining Fedora"
+msgstr "Informacje o Fedorze"
 
-#. Tag: para
-#: networkconfig.xml:46
+#. Tag: seealso
+#: new-users.xml:11
 #, no-c-format
-msgid ""
-"On some networks, the DHCP provider also provides the name of the computer, "
-"or <indexterm> <primary>hostname</primary> </indexterm> <firstterm>hostname</"
-"firstterm>. The complete hostname includes both the name of the machine and "
-"the name of the domain of which it is a member, such as <systemitem class="
-"\"fqdomainname\"><replaceable>machine1.example.com</replaceable></"
-"systemitem>. The machine name (or \"short hostname\") is <systemitem class="
-"\"systemname\"><replaceable>machine1</replaceable></systemitem>, and the "
-"<indexterm> <primary>domain name</primary> </indexterm> domain name is "
-"<systemitem class=\"domainname\"><replaceable>example.com</replaceable></"
-"systemitem>."
+msgid "<seealso>ISO images</seealso>"
 msgstr ""
 
-#. Tag: para
-#: networkconfig.xml:61
+#. Tag: primary
+#: new-users.xml:14
 #, no-c-format
-msgid ""
-"To set up a home network that is behind an Internet firewall or router, you "
-"may want to use <systemitem class=\"fqdomainname\"><replaceable>hostname</"
-"replaceable>.localdomain</systemitem> for your Fedora system. If you have "
-"more than one computer on this network, you should give each one a separate "
-"host name in this domain."
+msgid "<primary>ISO images</primary>"
 msgstr ""
 
-#. Tag: title
-#: new-users.xml:7
-#, no-c-format
-msgid "New Users"
-msgstr "Nowi uÅ¼ytkownicy"
-
 #. Tag: para
-#: new-users.xml:8
+#: new-users.xml:21
 #, fuzzy, no-c-format
 msgid ""
 "This chapter explains how to get the files you need to install and run "
@@ -19265,32 +19761,8 @@ msgstr ""
 "operacyjny. JeÅ›li masz problemy z tym rozdziaÅ‚em, moÅ¼na znaleÅºÄ‡ pomoc "
 "odwiedzajÄ…c Fora Fedory na <ulink url=\"http://www.fedoraforum.org/\"/>."
 
-#. Tag: title
-#: new-users.xml:16
-#, no-c-format
-msgid "Download Links"
-msgstr "OdnoÅ›niki do pobierania"
-
-#. Tag: para
-#: new-users.xml:17
-#, fuzzy, no-c-format
-msgid ""
-"To follow a Web-based guide to downloading, visit <ulink url=\"http://get."
-"fedoraproject.org/\"></ulink>. For guidance on which architecture to "
-"download, refer to <xref linkend=\"sn-which-arch\"/>."
-msgstr ""
-"Aby skorzystaÄ‡ z przewodnika pobierania przez WWW, odwiedÅº <ulink url="
-"\"http://get.fedoraproject.org/\"/>. Aby dowiedzieÄ‡ siÄ™, jakÄ… architekturÄ™ "
-"pobraÄ‡, zobacz <xref linkend=\"sn-which-arch\"/>."
-
-#. Tag: title
-#: new-users.xml:24
-#, no-c-format
-msgid "How Do I Download Installation Files?"
-msgstr "Jak pobraÄ‡ pliki instalacyjne?"
-
 #. Tag: para
-#: new-users.xml:25
+#: new-users.xml:29
 #, no-c-format
 msgid ""
 "The Fedora Project distributes Fedora in many ways, mostly free of cost and "
@@ -19302,13 +19774,13 @@ msgstr ""
 "noÅ›niki CD i DVD. DostÄ™pnych jest kilka typÃ³w noÅ›nikÃ³w CD i DVD, w tym:"
 
 #. Tag: para
-#: new-users.xml:31
+#: new-users.xml:35
 #, no-c-format
 msgid "A full set of the software on DVD media"
 msgstr "PeÅ‚ny zestaw oprogramowania na noÅ›niku DVD"
 
 #. Tag: para
-#: new-users.xml:34
+#: new-users.xml:38
 #, no-c-format
 msgid ""
 "Live images you can use to try Fedora, and then install to your system if "
@@ -19318,7 +19790,7 @@ msgstr ""
 "jeÅ›li chcesz"
 
 #. Tag: para
-#: new-users.xml:38
+#: new-users.xml:42
 #, no-c-format
 msgid ""
 "Reduced-size bootable CD and USB flash disk images you can use to install "
@@ -19328,13 +19800,13 @@ msgstr ""
 "moÅ¼na uÅ¼yÄ‡, aby zainstalowaÄ‡ przez poÅ‚Ä…czenie internetowe"
 
 #. Tag: para
-#: new-users.xml:42
+#: new-users.xml:46
 #, no-c-format
 msgid "Source code on DVD media"
 msgstr "Kod ÅºrÃ³dÅ‚owy na noÅ›nikach DVD"
 
 #. Tag: para
-#: new-users.xml:45
+#: new-users.xml:49
 #, no-c-format
 msgid ""
 "Most users want the Fedora Live image or the full set of installable "
@@ -19350,38 +19822,8 @@ msgstr ""
 "komputerze. PÅ‚yty z kodem ÅºrÃ³dÅ‚owym nie sÄ… uÅ¼ywane do instalowania Fedory, "
 "ale sÄ… przydatne dla zaawansowanych uÅ¼ytkownikÃ³w i programistÃ³w."
 
-#. Tag: title
-#: new-users.xml:51
-#, no-c-format
-msgid "Downloading media"
-msgstr "Pobieranie noÅ›nikÃ³w"
-
-#. Tag: primary
-#: new-users.xml:53 new-users.xml:445
-#, no-c-format
-msgid "CD/DVD media"
-msgstr "NoÅ›niki CD/DVD"
-
-#. Tag: seealso
-#: new-users.xml:55
-#, no-c-format
-msgid "<seealso>ISO images</seealso>"
-msgstr ""
-
-#. Tag: primary
-#: new-users.xml:58
-#, no-c-format
-msgid "<primary>ISO images</primary>"
-msgstr ""
-
-#. Tag: primary
-#: new-users.xml:62 new-users.xml:449
-#, no-c-format
-msgid "USB flash media"
-msgstr "noÅ›nik USB"
-
 #. Tag: para
-#: new-users.xml:65
+#: new-users.xml:56
 #, no-c-format
 msgid ""
 "Users with a broadband Internet connection can download <firstterm>ISO "
@@ -19397,7 +19839,7 @@ msgstr ""
 "formacie odpowiednim do nagrania bezpoÅ›rednio na dysk USB."
 
 #. Tag: para
-#: new-users.xml:71
+#: new-users.xml:62
 #, no-c-format
 msgid ""
 "For more information on burning CDs and DVDs, refer to <xref linkend=\"sn-"
@@ -19407,7 +19849,47 @@ msgstr ""
 "making-media\"/>."
 
 #. Tag: para
-#: new-users.xml:74
+#: new-users.xml:66
+#, no-c-format
+msgid ""
+"If downloading the Fedora ISO images and burning them to CD or DVD is "
+"impossible or impractical for you, refer to <xref linkend=\"sect-"
+"Obtaining_Fedora-Obtaining_Fedora_on_CD_or_DVD\"/> to learn about other ways "
+"that you can obtain Fedora."
+msgstr ""
+
+#. Tag: title
+#: new-users.xml:71
+#, fuzzy, no-c-format
+msgid "Downloading Fedora"
+msgstr "Pobieranie noÅ›nikÃ³w"
+
+#. Tag: title
+#: new-users.xml:73
+#, no-c-format
+msgid "How Do I Download Installation Files?"
+msgstr "Jak pobraÄ‡ pliki instalacyjne?"
+
+#. Tag: title
+#: new-users.xml:75
+#, no-c-format
+msgid "Download Links"
+msgstr "OdnoÅ›niki do pobierania"
+
+#. Tag: para
+#: new-users.xml:76
+#, fuzzy, no-c-format
+msgid ""
+"To follow a Web-based guide to downloading, visit <ulink url=\"http://get."
+"fedoraproject.org/\"></ulink>. For guidance on which architecture to "
+"download, refer to <xref linkend=\"sn-which-arch\"/>."
+msgstr ""
+"Aby skorzystaÄ‡ z przewodnika pobierania przez WWW, odwiedÅº <ulink url="
+"\"http://get.fedoraproject.org/\"/>. Aby dowiedzieÄ‡ siÄ™, jakÄ… architekturÄ™ "
+"pobraÄ‡, zobacz <xref linkend=\"sn-which-arch\"/>."
+
+#. Tag: para
+#: new-users.xml:83
 #, no-c-format
 msgid ""
 "Fedora software is available for download at no cost in a variety of ways."
@@ -19415,42 +19897,37 @@ msgstr ""
 "Oprogramowanie Fedory jest dostÄ™pne do pobrania za darmo na rÃ³Å¼ne sposoby."
 
 #. Tag: title
-#: new-users.xml:77
+#: new-users.xml:86
 #, no-c-format
 msgid "From a Mirror"
 msgstr "Z serwera lustrzanego"
 
 #. Tag: primary
-#: new-users.xml:79
+#: new-users.xml:88
 #, no-c-format
 msgid "mirror"
 msgstr "serwer lustrzany"
 
 #. Tag: para
-#: new-users.xml:81
-#, fuzzy, no-c-format
+#: new-users.xml:90
+#, no-c-format
 msgid ""
-"To find the freely downloadable distributions of Fedora, look for a "
-"<firstterm>mirror</firstterm>. A mirror is a computer server open to the "
-"public for free downloads of software, including Fedora. Mirrors offer both "
-"free open source software and closed source software. To locate a mirror, "
-"visit <ulink url=\"http://mirrors.fedoraproject.org/publiclist\"></ulink> "
-"using a Web browser, and choose a server from the list. The web page lists "
-"mirrors by geographic location. Mirrors geographically closer to you are "
-"ideal for faster downloading speeds."
-msgstr ""
-"Aby znaleÅºÄ‡ dystrybucjÄ™ Fedora do pobrania za darmo, poszukaj "
-"<firstterm>serwera lustrzanego</firstterm>. Serwer lustrzany jest publicznie "
-"otwartym serwerem, z ktÃ³rego moÅ¼na za darmo pobieraÄ‡ oprogramowanie, w tym "
-"FedorÄ™. OferujÄ… zarÃ³wno wolne oprogramowania, jak i oprogramowanie "
-"wÅ‚asnoÅ›ciowe. Aby znaleÅºÄ‡ serwer lustrzany, odwiedÅº <ulink url=\"http://"
-"mirrors.fedoraproject.org/publiclist\"/> uÅ¼ywajÄ…c przeglÄ…darki WWW i wybierz "
-"serwer z listy. Strona WWW wyÅ›wietla listÄ™ serwerÃ³w lustrzanych wedÅ‚ug ich "
-"poÅ‚oÅ¼enia geograficznego. MoÅ¼na wybraÄ‡ serwer bliski geograficznie, aby "
-"szybciej pobieraÄ‡."
-
-#. Tag: para
-#: new-users.xml:89
+"The Fedora installation files are freely available from web servers located "
+"in many parts of the world. These servers <firstterm>mirror</firstterm> the "
+"files available from the Fedora Project. If you visit <ulink url=\"http://"
+"download.fedoraproject.org/\"></ulink>, you are redirected to a mirror, "
+"based on a calculation of which mirror is likely to offer you the best "
+"download speed. Alternatively, you can choose a mirror from the list "
+"maintained at <ulink url=\"http://mirrors.fedoraproject.org/publiclist\"></"
+"ulink>. This page lists mirrors according to geographic location. The "
+"mirrors geographically closest to you are likely to provide you with the "
+"fastest downloads. If the company or organization that provides your "
+"internet access maintains a mirror, this mirror is likely to provide you "
+"with the fastest downloads of all."
+msgstr ""
+
+#. Tag: para
+#: new-users.xml:93
 #, fuzzy, no-c-format
 msgid ""
 "Mirrors publish Fedora software under a well-organized hierarchy of folders. "
@@ -19473,25 +19950,25 @@ msgstr ""
 "releases/10/x86_64/iso/F-10-x86_64-DVD.iso</filename>."
 
 #. Tag: title
-#: new-users.xml:101
+#: new-users.xml:105
 #, no-c-format
 msgid "From BitTorrent"
 msgstr "Z BitTorrenta"
 
 #. Tag: primary
-#: new-users.xml:103 new-users.xml:106
+#: new-users.xml:107 new-users.xml:110
 #, no-c-format
 msgid "BitTorrent"
 msgstr "BitTorrent"
 
 #. Tag: secondary
-#: new-users.xml:107
+#: new-users.xml:111
 #, no-c-format
 msgid "seeding"
 msgstr "udostÄ™pnianie"
 
 #. Tag: para
-#: new-users.xml:109
+#: new-users.xml:113
 #, no-c-format
 msgid ""
 "BitTorrent is a way to download information in cooperation with other "
@@ -19511,7 +19988,7 @@ msgstr ""
 "torrent przynajmniej dopÃ³ki nie wyÅ›lesz tyle samo danych, ile pobraÅ‚eÅ›."
 
 #. Tag: para
-#: new-users.xml:118
+#: new-users.xml:122
 #, fuzzy, no-c-format
 msgid ""
 "If your computer does not have software installed for BitTorrent, visit the "
@@ -19525,7 +20002,7 @@ msgstr ""
 "dostÄ™pne dla Windows, Mac OS, Linuksa i wielu innych systemÃ³w operacyjnych."
 
 #. Tag: para
-#: new-users.xml:122
+#: new-users.xml:126
 #, fuzzy, no-c-format
 msgid ""
 "You do not need to find a special mirror for BitTorrent files. The "
@@ -19539,13 +20016,13 @@ msgstr ""
 "\"http://torrent.fedoraproject.org/\"/>."
 
 #. Tag: title
-#: new-users.xml:127
+#: new-users.xml:131
 #, no-c-format
 msgid "Minimal Boot Images"
 msgstr "Minimalne obrazy startowe"
 
 #. Tag: para
-#: new-users.xml:128
+#: new-users.xml:132
 #, no-c-format
 msgid ""
 "Minimal boot CD and USB flash disk images are not available through "
@@ -19553,19 +20030,19 @@ msgid ""
 msgstr "Minimalne obrazy startowe CD i USB nie sÄ… dostÄ™pne przez BitTorrent."
 
 #. Tag: title
-#: new-users.xml:134
+#: new-users.xml:138
 #, no-c-format
 msgid "Which Architecture Is My Computer?"
 msgstr "JakÄ… architekturÄ™ ma mÃ³j komputer?"
 
 #. Tag: primary
-#: new-users.xml:136 new-users.xml:144
+#: new-users.xml:140 new-users.xml:148
 #, no-c-format
 msgid "architecture"
 msgstr "architektura"
 
 #. Tag: para
-#: new-users.xml:138
+#: new-users.xml:142
 #, no-c-format
 msgid ""
 "Releases are separated by <firstterm>architecture</firstterm>, or type of "
@@ -19579,31 +20056,31 @@ msgstr ""
 "procesorze w dokumentacji producenta."
 
 #. Tag: secondary
-#: new-users.xml:145
+#: new-users.xml:149
 #, no-c-format
 msgid "determining"
 msgstr "okreÅ›lanie"
 
 #. Tag: title
-#: new-users.xml:148
+#: new-users.xml:152
 #, fuzzy, no-c-format
 msgid "Processor and architecture types"
 msgstr "Typy procesorÃ³w i architektur"
 
 #. Tag: entry
-#: new-users.xml:154
+#: new-users.xml:158
 #, fuzzy, no-c-format
 msgid "Processor manufacturer and model"
 msgstr "Producent i model procesora"
 
 #. Tag: entry
-#: new-users.xml:155
+#: new-users.xml:159
 #, fuzzy, no-c-format
 msgid "Architecture type for Fedora"
 msgstr "Typ architektury dla Fedory"
 
 #. Tag: entry
-#: new-users.xml:160
+#: new-users.xml:164
 #, fuzzy, no-c-format
 msgid ""
 "Intel (except Atom 230, Atom 330, Core 2 Duo, Centrino Core2 Duo, and recent "
@@ -19615,45 +20092,44 @@ msgstr ""
 "i Opteronem), VIA C4, C7, Apple MacBook Pro"
 
 #. Tag: systemitem
-#: new-users.xml:162
+#: new-users.xml:166
 #, no-c-format
 msgid "i386"
 msgstr "i386"
 
 #. Tag: entry
-#: new-users.xml:165
-#, no-c-format
+#: new-users.xml:169
+#, fuzzy, no-c-format
 msgid ""
 "Intel Atom 230, Atom 330, Core 2 Duo, Centrino Core 2 Duo, and Xeon; AMD "
-"Athlon 64, Athlon x2, Sempron64, and Opteron"
+"Athlon 64, Athlon x2, Sempron64, and Opteron; Apple MacBook, MacBook Pro, "
+"and MacBook Air"
 msgstr ""
 "Intel Atom 230, Atom 330, Core 2 Duo, Centrino Core 2 Duo i Xeon; AMD Athlon "
 "64, Athlon X2, Sempron64 i Opteron"
 
 #. Tag: systemitem
-#: new-users.xml:167
+#: new-users.xml:171
 #, no-c-format
 msgid "x86_64"
 msgstr "x86_64"
 
 #. Tag: entry
-#: new-users.xml:170
+#: new-users.xml:174
 #, fuzzy, no-c-format
-msgid ""
-"Apple Macintosh G3, G4, G5, PowerBook, MacBook, MacBook Pro, MacBook Air, "
-"and other non-Intel models"
+msgid "Apple Macintosh G3, G4, G5, PowerBook, and other non-Intel models"
 msgstr ""
 "Apple Macintosh G3, G4, G5, PowerBook i inne modele nie uÅ¼ywajÄ…ce procesorÃ³w "
 "Intela"
 
 #. Tag: systemitem
-#: new-users.xml:172
+#: new-users.xml:176
 #, no-c-format
 msgid "<systemitem>ppc</systemitem>"
 msgstr ""
 
 #. Tag: title
-#: new-users.xml:178
+#: new-users.xml:182
 #, no-c-format
 msgid ""
 "<systemitem>i386</systemitem> Works for Most Windows Compatible Computers"
@@ -19662,7 +20138,7 @@ msgstr ""
 "Windows"
 
 #. Tag: para
-#: new-users.xml:180
+#: new-users.xml:184
 #, no-c-format
 msgid ""
 "If you are unsure what type of processor your computer uses, choose "
@@ -19672,7 +20148,7 @@ msgstr ""
 "<systemitem>i386</systemitem>."
 
 #. Tag: para
-#: new-users.xml:182
+#: new-users.xml:186
 #, no-c-format
 msgid ""
 "The exception is if your computer is a non-Intel based Apple Macintosh. "
@@ -19684,13 +20160,13 @@ msgstr ""
 "wiÄ™cej."
 
 #. Tag: title
-#: new-users.xml:187
+#: new-users.xml:191
 #, no-c-format
 msgid "Intel Atom Processor Architectures Vary"
 msgstr "Architektury procesorÃ³w Intel Atom mogÄ… siÄ™ rÃ³Å¼niÄ‡"
 
 #. Tag: para
-#: new-users.xml:188
+#: new-users.xml:192
 #, fuzzy, no-c-format
 msgid ""
 "The N and Z Series Atom processors are based on the <systemitem>i386</"
@@ -19705,13 +20181,13 @@ msgstr ""
 "cpugroup.aspx?familyID=29035\"/>, aby dowiedzieÄ‡ siÄ™ wiÄ™cej."
 
 #. Tag: title
-#: new-users.xml:195
+#: new-users.xml:199
 #, no-c-format
 msgid "Which Files Do I Download?"
 msgstr "KtÃ³re pliki naleÅ¼y pobraÄ‡?"
 
 #. Tag: para
-#: new-users.xml:196
+#: new-users.xml:200
 #, no-c-format
 msgid ""
 "You have several options to download Fedora. Read the options below to "
@@ -19721,7 +20197,7 @@ msgstr ""
 "zdecydowaÄ‡, ktÃ³ra bÄ™dzie dla ciebie najlepsza."
 
 #. Tag: para
-#: new-users.xml:198
+#: new-users.xml:202
 #, fuzzy, no-c-format
 msgid ""
 "Each file available for download in a Fedora distribution includes the "
@@ -19736,13 +20212,13 @@ msgstr ""
 "\"sn-which-arch\"/>, jeÅ›li nie jesteÅ› pewny architektury komputera."
 
 #. Tag: title
-#: new-users.xml:208
+#: new-users.xml:212
 #, no-c-format
 msgid "Full Distribution on DVD"
 msgstr "PeÅ‚na dystrybucja na DVD"
 
 #. Tag: para
-#: new-users.xml:209
+#: new-users.xml:213
 #, no-c-format
 msgid ""
 "If you have plenty of time, a fast Internet connection, and wish a broader "
@@ -19760,13 +20236,13 @@ msgstr ""
 "BitTorrenta."
 
 #. Tag: title
-#: new-users.xml:220
+#: new-users.xml:224
 #, no-c-format
 msgid "Live Image"
 msgstr "Obraz Live"
 
 #. Tag: para
-#: new-users.xml:221
+#: new-users.xml:225
 #, fuzzy, no-c-format
 msgid ""
 "If you want to try Fedora before you install it on your computer, download "
@@ -19786,13 +20262,13 @@ msgstr ""
 "Live bezpoÅ›rednio z serwera lustrzanego lub uÅ¼ywajÄ…c BitTorrenta."
 
 #. Tag: title
-#: new-users.xml:241
+#: new-users.xml:245
 #, no-c-format
 msgid "Minimal Boot Media"
 msgstr "Minimalny noÅ›nik startowy"
 
 #. Tag: para
-#: new-users.xml:242
+#: new-users.xml:246
 #, no-c-format
 msgid ""
 "If you have a fast Internet connection but do not want to download the "
@@ -19814,13 +20290,13 @@ msgstr ""
 "systemie wedÅ‚ug uznania."
 
 #. Tag: title
-#: new-users.xml:254
+#: new-users.xml:258
 #, no-c-format
 msgid "Download Size"
 msgstr "Rozmiar pobieranych plikÃ³w"
 
 #. Tag: para
-#: new-users.xml:255
+#: new-users.xml:259
 #, no-c-format
 msgid ""
 "Installing the default software for Fedora over the Internet requires more "
@@ -19833,7 +20309,7 @@ msgstr ""
 "zaleÅ¼y od wyboru oprogramowania i warunkÃ³w ruchu sieciowego."
 
 #. Tag: para
-#: new-users.xml:263
+#: new-users.xml:267
 #, no-c-format
 msgid ""
 "The following table explains where to find the desired files on a mirror "
@@ -19845,31 +20321,31 @@ msgstr ""
 "komputera, na ktÃ³rym bÄ™dzie Fedora bÄ™dzie instalowana."
 
 #. Tag: title
-#: new-users.xml:267
+#: new-users.xml:271
 #, fuzzy, no-c-format
 msgid "Locating files"
 msgstr "Ustalanie poÅ‚oÅ¼enia plikÃ³w"
 
 #. Tag: entry
-#: new-users.xml:273
+#: new-users.xml:277
 #, fuzzy, no-c-format
 msgid "Media type"
 msgstr "Typ noÅ›nika"
 
 #. Tag: entry
-#: new-users.xml:274
+#: new-users.xml:278
 #, fuzzy, no-c-format
 msgid "File locations"
 msgstr "PoÅ‚oÅ¼enie plikÃ³w"
 
 #. Tag: entry
-#: new-users.xml:279
+#: new-users.xml:283
 #, no-c-format
 msgid "Full distribution on DVD"
 msgstr "PeÅ‚na dystrybucja na DVD"
 
 #. Tag: filename
-#: new-users.xml:280
+#: new-users.xml:284
 #, fuzzy, no-c-format
 msgid ""
 "fedora/linux/releases/&PRODVER;/Fedora/<replaceable>arch</replaceable>/iso/"
@@ -19879,13 +20355,13 @@ msgstr ""
 "DVD.iso"
 
 #. Tag: entry
-#: new-users.xml:283
+#: new-users.xml:287
 #, no-c-format
 msgid "Live image"
 msgstr "Obraz Live"
 
 #. Tag: entry
-#: new-users.xml:284
+#: new-users.xml:288
 #, no-c-format
 msgid ""
 "<filename>fedora/linux/releases/&PRODVER;/Live/<replaceable>arch</"
@@ -19896,13 +20372,13 @@ msgid ""
 msgstr ""
 
 #. Tag: entry
-#: new-users.xml:288
+#: new-users.xml:292
 #, no-c-format
 msgid "Minimal CD boot media"
 msgstr "Minimalny startowy noÅ›nik CD"
 
 #. Tag: filename
-#: new-users.xml:289
+#: new-users.xml:293
 #, fuzzy, no-c-format
 msgid ""
 "fedora/linux/releases/&PRODVER;/Fedora/<replaceable>arch</replaceable>/os/"
@@ -19910,13 +20386,13 @@ msgid ""
 msgstr "fedora/linux/releases/10/Fedora/<placeholder-1/>/os/images/boot.iso"
 
 #. Tag: title
-#: new-users.xml:296
+#: new-users.xml:300
 #, no-c-format
 msgid "How Do I Make Fedora Media?"
 msgstr "Jak utworzyÄ‡ noÅ›nik Fedory?"
 
 #. Tag: para
-#: new-users.xml:297
+#: new-users.xml:301
 #, fuzzy, no-c-format
 msgid ""
 "A Fedora ISO file can be turned into either CD or DVD discs. You can turn "
@@ -19926,263 +20402,19 @@ msgstr ""
 "moÅ¼na zmieniÄ‡ zarÃ³wno na startowy noÅ›nik USB, jak i CD lub DVD."
 
 #. Tag: title
-#: new-users.xml:303
+#: new-users.xml:307
 #, no-c-format
 msgid "Making CD or DVD Discs"
 msgstr "Tworzenie pÅ‚yt CD lub DVD"
 
-#. Tag: para
-#: new-users.xml:304
-#, fuzzy, no-c-format
-msgid ""
-"To learn how to turn ISO images into CD or DVD media, refer to <ulink url="
-"\"http://docs.fedoraproject.org/readme-burning-isos/\"></ulink>."
-msgstr ""
-"Aby nauczyÄ‡ siÄ™, jak nagraÄ‡ obrazy ISO na noÅ›niki CD lub DVD, odwiedÅº <ulink "
-"url=\"http://docs.fedoraproject.org/readme-burning-isos/\"/>."
-
-#. Tag: title
-#: new-users.xml:309
-#, no-c-format
-msgid "Making USB Media"
-msgstr "Tworzenie noÅ›nika USB"
-
-#. Tag: para
-#: new-users.xml:310
-#, no-c-format
-msgid ""
-"To make bootable USB media, use a Fedora Live image. Use either a Windows or "
-"Linux system to make the bootable USB media."
-msgstr ""
-"Aby utworzyÄ‡ startowy noÅ›nik USB, uÅ¼yj obrazu Live Fedory. UÅ¼yj systemu "
-"Windows lub Linux."
-
-#. Tag: title
-#: new-users.xml:315
-#, no-c-format
-msgid "USB Image Writing is Nondestructive"
-msgstr "Zapisywanie obrazu na USB nie uszkadza danych"
-
-#. Tag: para
-#: new-users.xml:316
-#, no-c-format
-msgid ""
-"Writing the Live image to the USB media is <emphasis>nondestructive</"
-"emphasis>. Any existing data on the media is not harmed."
-msgstr ""
-"Zapisywanie obrazu Live na noÅ›niku USB <emphasis>nie uszkadza danych</"
-"emphasis>. Å»adne istniejÄ…ce dane na noÅ›niku nie zostanÄ… uszkodzone."
-
-#. Tag: emphasis
-#: new-users.xml:322
-#, no-c-format
-msgid ""
-"It is always a good idea to back up important data before performing "
-"sensitive disk operations."
-msgstr ""
-"Zawsze jest dobrze wykonaÄ‡ kopiÄ™ zapasowÄ… waÅ¼nych danych przed "
-"przeprowadzeniem duÅ¼ych operacji na dysku."
-
-#. Tag: para
-#: new-users.xml:326
-#, no-c-format
-msgid ""
-"To begin, make sure there is sufficient free space available on the USB "
-"media. There is no need to repartition or reformat your media. <emphasis>It "
-"is always a good idea to back up important data before performing sensitive "
-"disk operations.</emphasis>"
-msgstr ""
-"Aby zaczÄ…Ä‡, upewnij siÄ™, Å¼e na noÅ›niku USB jest wystarczajÄ…ca iloÅ›Ä‡ wolnego "
-"miejsca. Nie musisz ponownie partycjonowaÄ‡ lub formatowaÄ‡ noÅ›nika. "
-"<emphasis>Zawsze jest dobrze wykonaÄ‡ kopiÄ™ zapasowÄ… waÅ¼nych danych przed "
-"przeprowadzeniem duÅ¼ych operacji na dysku.</emphasis>"
-
 #. Tag: title
-#: new-users.xml:334
+#: new-users.xml:318
 #, no-c-format
-msgid "USB Image Creation from Windows"
-msgstr "Tworzenie obrazu USB w Windows"
-
-#. Tag: para
-#: new-users.xml:337
-#, no-c-format
-msgid ""
-"Download a Live ISO file as explained in <xref linkend=\"sn-which-files\"/>."
+msgid "Obtaining Fedora on CD or DVD"
 msgstr ""
-"Pobierz plik ISO Live, jak pokazano w <xref linkend=\"sn-which-files\"/>."
 
 #. Tag: para
-#: new-users.xml:342
-#, fuzzy, no-c-format
-msgid ""
-"Download the Windows <application>liveusb-creator</application> program at "
-"<ulink url=\"http://fedorahosted.org/liveusb-creator\"></ulink>."
-msgstr ""
-"Pobierz program <application>liveusb-creator</application> dla Windows na "
-"<ulink url=\"http://fedorahosted.org/liveusb-creator\"/>."
-
-#. Tag: para
-#: new-users.xml:348
-#, no-c-format
-msgid ""
-"Follow the instructions given at the site and in the <application>liveusb-"
-"creator</application> program to create the bootable USB media."
-msgstr ""
-"PostÄ™puj zgodnie z instrukcjami podanymi na stronie i w programie "
-"<application>liveusb-creator</application>, aby utworzyÄ‡ startowy noÅ›nik USB."
-
-#. Tag: title
-#: new-users.xml:357
-#, no-c-format
-msgid "USB Image Creation in Linux"
-msgstr "Tworzenie obrazu USB w Linuksie"
-
-#. Tag: para
-#: new-users.xml:359
-#, no-c-format
-msgid ""
-"USB media often comes in the form of flash devices sometimes called "
-"<firstterm>pen drives</firstterm>, <firstterm>thumb disks</firstterm>, or "
-"<firstterm>keys</firstterm>; or as an externally connected hard disk device. "
-"Almost all media of this type is formatted as a vfat file system. You can "
-"create bootable USB media on media formatted as ext2, ext3, or vfat."
-msgstr ""
-"NoÅ›niki USB czÄ™sto wystÄ™pujÄ… w formie urzÄ…dzeÅ„ flash, nazywanych czasami "
-"<firstterm>pendrive'ami</firstterm> lub <firstterm>kluczami</firstterm>, "
-"albo jako zewnÄ™trznie podÅ‚Ä…czane urzÄ…dzenie dysku twardego. Prawie wszystkie "
-"noÅ›niku tego typu sÄ… sformatowane jako system plikÃ³w VFAT. MoÅ¼na utworzyÄ‡ "
-"startowe noÅ›niki USB na noÅ›nikach sformatowanych jako ext2, ext3 lub VFAT."
-
-#. Tag: para
-#: new-users.xml:369
-#, no-c-format
-msgid ""
-"The <application>GRUB</application> bootloader does not support the ext4 "
-"file system. You cannot create bootable USB media on media formatted as ext4."
-msgstr ""
-
-#. Tag: title
-#: new-users.xml:374
-#, no-c-format
-msgid "Unusual USB Media"
-msgstr "Inny noÅ›nik USB"
-
-#. Tag: para
-#: new-users.xml:375
-#, no-c-format
-msgid ""
-"In a few cases with oddly formatted or partitioned USB media, the image "
-"writing may fail."
-msgstr ""
-"W niektÃ³rych przypadkach na nietypowo sformatowanych lub spartycjonowanych "
-"noÅ›nikach USB zapisywanie obrazu moÅ¼e siÄ™ nie powieÅ›Ä‡."
-
-#. Tag: para
-#: new-users.xml:381
-#, no-c-format
-msgid ""
-"Download a Live ISO file as shown in <xref linkend=\"sn-which-files\"/>."
-msgstr ""
-"Pobierz plik obrazu Live, jak pokazano w <xref linkend=\"sn-which-files\"/>."
-
-#. Tag: para
-#: new-users.xml:387
-#, no-c-format
-msgid ""
-"Install the <package>livecd-tools</package> package on your system. For "
-"Fedora systems, use the following command:"
-msgstr ""
-"Zainstaluj pakiet <package>livecd-tools</package> w systemie. W systemach "
-"Fedora uÅ¼yj nastÄ™pujÄ…cego polecenia:"
-
-#. Tag: screen
-#: new-users.xml:391
-#, no-c-format
-msgid "<![CDATA[su -c 'yum -y install livecd-tools']]>"
-msgstr ""
-
-#. Tag: para
-#: new-users.xml:394
-#, no-c-format
-msgid "Plug in your USB media."
-msgstr "PodÅ‚Ä…cz noÅ›nik USB."
-
-#. Tag: para
-#: new-users.xml:399
-#, no-c-format
-msgid ""
-"Find the device name for your USB media. If the media has a volume name, "
-"look up the name in <filename class=\"directory\">/dev/disk/by-label</"
-"filename>, or use the <command>findfs</command>:"
-msgstr ""
-"ZnajdÅº nazwÄ™ urzÄ…dzenia noÅ›nika USB. JeÅ›li noÅ›nik posiada nazwÄ™ woluminu, "
-"poszukaj nazwy w <filename class=\"directory\">/dev/disk/by-label</filename> "
-"lub uÅ¼yj <command>findfs</command>:"
-
-#. Tag: screen
-#: new-users.xml:405
-#, no-c-format
-msgid ""
-"<![CDATA[su -c 'findfs LABEL=\"]]><replaceable>MyLabel</replaceable><![CDATA"
-"[\"']]>"
-msgstr ""
-
-#. Tag: para
-#: new-users.xml:406
-#, no-c-format
-msgid ""
-"If the media does not have a volume name, or you do not know it, consult the "
-"<filename>/var/log/messages</filename> log for details:"
-msgstr ""
-"JeÅ›li noÅ›nik nie posiada nazwy woluminu lub jej nie znasz, sprawdÅº plik "
-"<filename>/var/log/messages</filename>, aby uzyskaÄ‡ szczegÃ³Å‚y:"
-
-#. Tag: screen
-#: new-users.xml:411
-#, no-c-format
-msgid "<![CDATA[su -c 'less /var/log/messages']]>"
-msgstr ""
-
-#. Tag: para
-#: new-users.xml:414
-#, no-c-format
-msgid ""
-"Use the <command>livecd-iso-to-disk</command> command to write the ISO image "
-"to the media:"
-msgstr ""
-"UÅ¼yj polecenia <command>livecd-iso-to-disk</command>, aby zapisaÄ‡ obraz ISO "
-"na noÅ›niku:"
-
-#. Tag: screen
-#: new-users.xml:418
-#, no-c-format
-msgid ""
-"<![CDATA[su -c 'livecd-iso-to-disk ]]><replaceable>the_image.iso</"
-"replaceable><![CDATA[ /dev/]]><replaceable>sdX1</replaceable><![CDATA[']]>"
-msgstr ""
-
-#. Tag: para
-#: new-users.xml:419
-#, no-c-format
-msgid ""
-"Replace <replaceable>sdX1</replaceable> with the device name for the "
-"partition on the USB media. Most flash drives and external hard disks use "
-"only one partition. If you have changed this behavior or have oddly "
-"partitioned media, you may need to consult other sources of help."
-msgstr ""
-"ZastÄ…p <replaceable>sdX1</replaceable> nazwÄ… urzÄ…dzenia dla partycji na "
-"noÅ›niku USB. WiÄ™kszoÅ›Ä‡ dyskÃ³w USB i zewnÄ™trznych dyskÃ³w twardych uÅ¼ywa tylko "
-"jednej partycji. JeÅ›li zmieniÅ‚eÅ› to zachowanie lub posiadasz nietypowo "
-"spartycjonowany noÅ›nik USB, musisz sprawdziÄ‡ inne ÅºrÃ³dÅ‚a pomocy."
-
-#. Tag: title
-#: new-users.xml:432
-#, no-c-format
-msgid "What If I Cannot Download Fedora?"
-msgstr "Co, jeÅ›li nie mogÄ™ pobraÄ‡ Fedory?"
-
-#. Tag: para
-#: new-users.xml:433
+#: new-users.xml:319
 #, fuzzy, no-c-format
 msgid ""
 "If you do not have a fast Internet connection, or if you have a problem "
@@ -20200,100 +20432,6 @@ msgstr ""
 "Distribution\"/>."
 
 #. Tag: title
-#: new-users.xml:440
-#, no-c-format
-msgid "How Do I Start the Installation Program?"
-msgstr "Jak uruchomiÄ‡ program instalacyjny?"
-
-#. Tag: primary
-#: new-users.xml:442
-#, no-c-format
-msgid "BIOS (Basic Input/Output System)"
-msgstr "BIOS (Podstawowy system wejÅ›cia/wyjÅ›cia)"
-
-#. Tag: para
-#: new-users.xml:452
-#, no-c-format
-msgid ""
-"To start the installation program from minimal boot media, a Live image, or "
-"the distribution DVD, follow this procedure:"
-msgstr ""
-"Aby uruchomiÄ‡ program instalacyjny z minimalnego noÅ›nika startowego, obrazu "
-"Live lub dystrybucji DVD postÄ™puj zgodnie z tÄ… procedurÄ…:"
-
-#. Tag: para
-#: new-users.xml:456
-#, no-c-format
-msgid "Power off your computer system."
-msgstr "WyÅ‚Ä…cz komputer."
-
-#. Tag: para
-#: new-users.xml:459
-#, no-c-format
-msgid ""
-"Disconnect any external FireWire or USB disks that you do not need for "
-"installation. Refer to <xref linkend=\"sn-partitioning-fw-usb\"/> for more "
-"information."
-msgstr ""
-"RozÅ‚Ä…cz wszystkie zewnÄ™trzne dyski FireWire lub USB, ktÃ³re nie sÄ… niezbÄ™dne "
-"do instalacji. Zobacz <xref linkend=\"sn-partitioning-fw-usb\"/>, aby "
-"dowiedzieÄ‡ siÄ™ wiÄ™cej."
-
-#. Tag: para
-#: new-users.xml:465
-#, no-c-format
-msgid "Insert the media in your computer and turn it on."
-msgstr "UmieÅ›Ä‡ noÅ›nik w komputerze i wÅ‚Ä…cz go."
-
-#. Tag: para
-#: new-users.xml:468
-#, no-c-format
-msgid ""
-"You may need to press a specific key or combination of keys to boot from the "
-"media, or configure your system's <firstterm>Basic Input/Output System</"
-"firstterm>, or <acronym>BIOS</acronym>, to boot from the media. On most "
-"computers you must select the boot or BIOS option promptly after turning on "
-"the computer. Most Windows-compatible computer systems use a special key "
-"such as <keycap>F1</keycap>, <keycap>F2</keycap>, <keycap>F12</keycap>, or "
-"<keycap>Del</keycap> to start the BIOS configuration menu. On Apple "
-"computers, the <keycap>C</keycap> key boots the system from the DVD drive. "
-"On older Apple hardware you may need to press <keycap>Cmd</keycap> "
-"+<keycap>Opt</keycap>+<keycap>Shift</keycap>+<keycap>Del</keycap> to boot "
-"from DVD drive."
-msgstr ""
-"ByÄ‡ moÅ¼e bÄ™dziesz musiaÅ‚ nacisnÄ…Ä‡ okreÅ›lony klawisz lub kombinacjÄ™ klawiszy "
-"lub skonfigurowaÄ‡ <firstterm>Podstawowy system wejÅ›cia/wyjÅ›cia</firstterm>, "
-"czyli <acronym>BIOS</acronym>, aby uruchomiÄ‡ z noÅ›nika. W wiÄ™kszoÅ›ci "
-"komputerÃ³w musisz wybraÄ‡ opcjÄ™ uruchamiania lub BIOS-u po wÅ‚Ä…czeniu "
-"komputera. WiÄ™kszoÅ›Ä‡ systemÃ³w komputerowych zgodnych z Windows uÅ¼ywa "
-"specjalnego klawisza, takiego jak <keycap>F1</keycap>, <keycap>F2</keycap>, "
-"<keycap>F12</keycap> lub <keycap>Del</keycap>, aby uruchomiÄ‡ menu "
-"konfiguracji BIOS-u. Na komputerach Apple'a klawisz <keycap>C</keycap> "
-"uruchamia system z napÄ™du DVD. Na starszym sprzÄ™cie Apple'a musisz nacisnÄ…Ä‡ "
-"<keycap>Cmd</keycap> +<keycap>Opt</keycap>+<keycap>Shift</keycap>"
-"+<keycap>Del</keycap>, aby uruchomiÄ‡ z napÄ™du DVD."
-
-#. Tag: title
-#: new-users.xml:481
-#, no-c-format
-msgid "Configuring the BIOS"
-msgstr "Konfigurowanie BIOS-u"
-
-#. Tag: para
-#: new-users.xml:482
-#, no-c-format
-msgid ""
-"If you are not sure what capabilities your computer has, or how to configure "
-"the BIOS, consult the documentation provided by the manufacturer. Detailed "
-"information on hardware specifications and configuration is beyond the scope "
-"of this document."
-msgstr ""
-"JeÅ›li nie jesteÅ› pewny, jakie z tych moÅ¼liwoÅ›ci posiada komputer lub nie "
-"wiesz jak skonfigurowaÄ‡ BIOS, zapoznaj siÄ™ z dokumentacjÄ… dostarczonÄ… przez "
-"producenta. SzczegÃ³Å‚owe informacje o konfiguracji wykraczajÄ… poza ramy tego "
-"dokumentu."
-
-#. Tag: title
 #: nextsteps.xml:10
 #, no-c-format
 msgid "Your Next Steps"
@@ -20499,19 +20637,19 @@ msgstr ""
 "sn-updating-your-system.html\"/>."
 
 #. Tag: title
-#: nextsteps.xml:132
+#: nextsteps.xml:135
 #, no-c-format
 msgid "Finishing an Upgrade"
 msgstr "DokoÅ„czenie aktualizacji"
 
 #. Tag: title
-#: nextsteps.xml:134
+#: nextsteps.xml:137
 #, no-c-format
 msgid "System Updates Recommended"
 msgstr "Aktualizacja systemu jest zalecana"
 
 #. Tag: para
-#: nextsteps.xml:135
+#: nextsteps.xml:138
 #, no-c-format
 msgid ""
 "Once you have rebooted your system after performing an upgrade, you should "
@@ -20523,7 +20661,7 @@ msgstr ""
 "linkend=\"sn-system-updating\"/>, aby dowiedzieÄ‡ siÄ™ wiÄ™cej."
 
 #. Tag: para
-#: nextsteps.xml:140
+#: nextsteps.xml:143
 #, no-c-format
 msgid ""
 "If you chose to upgrade your system from a previous release rather than "
@@ -20539,7 +20677,20 @@ msgstr ""
 "okreÅ›liÄ‡ w jaki sposÃ³b przywrÃ³ciÄ‡ nowy system do oryginalnego stanu systemu."
 
 #. Tag: para
-#: nextsteps.xml:147
+#: nextsteps.xml:150
+#, no-c-format
+msgid ""
+"You can obtain a list of <firstterm>orphaned</firstterm> packages (that is, "
+"packages that are no longer in the repositories) from the "
+"<application>package-cleanup</application> tool. Install the <package>yum-"
+"utils</package> package and then run <command>package-cleanup --orphans</"
+"command>. The tool will show you orphaned packages and packages that are "
+"partially uninstalled but for which the <application>%postun</application> "
+"script failed."
+msgstr ""
+
+#. Tag: para
+#: nextsteps.xml:153
 #, no-c-format
 msgid ""
 "Most software repository configurations are stored in packages that end with "
@@ -20551,7 +20702,7 @@ msgstr ""
 "pakietÃ³w z zainstalowanych repozytoriÃ³w:"
 
 #. Tag: screen
-#: nextsteps.xml:150
+#: nextsteps.xml:156
 #, no-c-format
 msgid ""
 "<command><![CDATA[awk '{print $1}' ~/old-pkglist.txt | grep 'release$']]></"
@@ -20559,7 +20710,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: nextsteps.xml:151
+#: nextsteps.xml:157
 #, no-c-format
 msgid ""
 "If necessary, retrieve and install these software repository packages from "
@@ -20575,7 +20726,7 @@ msgstr ""
 "systemie Fedora."
 
 #. Tag: para
-#: nextsteps.xml:156
+#: nextsteps.xml:162
 #, no-c-format
 msgid ""
 "Then run the following commands to make a list of other missing software "
@@ -20585,7 +20736,7 @@ msgstr ""
 "brakujÄ…cych pakietÃ³w oprogramowania:"
 
 #. Tag: screen
-#: nextsteps.xml:159
+#: nextsteps.xml:165
 #, no-c-format
 msgid ""
 "<command>awk '{print $1}' ~/old-pkglist.txt | sort | uniq > ~/old-pkgnames."
@@ -20597,7 +20748,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: nextsteps.xml:161
+#: nextsteps.xml:167
 #, no-c-format
 msgid ""
 "Now use the file <filename>/tmp/pkgs-to-install.txt</filename> with the "
@@ -20608,7 +20759,7 @@ msgstr ""
 "starego oprogramowania:"
 
 #. Tag: screen
-#: nextsteps.xml:165
+#: nextsteps.xml:171
 #, no-c-format
 msgid ""
 "<command><![CDATA[su -c 'yum install `cat /tmp/pkgs-to-install.txt`']]></"
@@ -20616,13 +20767,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: nextsteps.xml:168
+#: nextsteps.xml:174
 #, no-c-format
 msgid "Missing Software"
 msgstr "BrakujÄ…ce oprogramowanie"
 
 #. Tag: para
-#: nextsteps.xml:169
+#: nextsteps.xml:175
 #, no-c-format
 msgid ""
 "Due to changes in package complements between Fedora releases, it is "
@@ -20636,13 +20787,13 @@ msgstr ""
 "rozwiÄ…zaÄ‡ problemy, jeÅ›li je znajdziesz."
 
 #. Tag: title
-#: nextsteps.xml:177
+#: nextsteps.xml:183
 #, no-c-format
 msgid "Switching to a Graphical Login"
 msgstr "PrzeÅ‚Ä…czanie na logowanie graficzne"
 
 #. Tag: para
-#: nextsteps.xml:178
+#: nextsteps.xml:184
 #, no-c-format
 msgid ""
 "If you installed using a text login and wish to switch to a graphical login, "
@@ -20652,25 +20803,25 @@ msgstr ""
 "logowanie graficzne, postÄ™puj zgodnie z tÄ… instrukcjÄ…."
 
 #. Tag: para
-#: nextsteps.xml:184
+#: nextsteps.xml:190
 #, no-c-format
 msgid "Switch users to the <systemitem>root</systemitem> account:"
 msgstr "PrzeÅ‚Ä…cz uÅ¼ytkownikÃ³w na konto <systemitem>roota</systemitem>:"
 
 #. Tag: screen
-#: nextsteps.xml:187
+#: nextsteps.xml:193
 #, no-c-format
 msgid "<![CDATA[su -]]>"
 msgstr ""
 
 #. Tag: para
-#: nextsteps.xml:188
+#: nextsteps.xml:194
 #, no-c-format
 msgid "Provide the administrator password when prompted."
 msgstr "Podaj hasÅ‚o administratora, kiedy zostaniesz o nie poproszony."
 
 #. Tag: para
-#: nextsteps.xml:193
+#: nextsteps.xml:199
 #, no-c-format
 msgid ""
 "If you have not already done so, install one of the graphical desktop "
@@ -20682,13 +20833,13 @@ msgstr ""
 "polecenia:"
 
 #. Tag: screen
-#: nextsteps.xml:198
+#: nextsteps.xml:204
 #, no-c-format
 msgid "<![CDATA[yum groupinstall \"GNOME Desktop Environment\"]]>"
 msgstr ""
 
 #. Tag: para
-#: nextsteps.xml:199
+#: nextsteps.xml:205
 #, no-c-format
 msgid ""
 "This step may take some time as your Fedora system downloads and installs "
@@ -20700,7 +20851,7 @@ msgstr ""
 "instalacyjnego, w zaleÅ¼noÅ›ci od oryginalnego ÅºrÃ³dÅ‚a instalacji."
 
 #. Tag: para
-#: nextsteps.xml:207
+#: nextsteps.xml:213
 #, no-c-format
 msgid ""
 "Run the following command to edit the <filename>/etc/inittab</filename> file:"
@@ -20709,13 +20860,13 @@ msgstr ""
 "filename>:"
 
 #. Tag: screen
-#: nextsteps.xml:211
+#: nextsteps.xml:217
 #, no-c-format
 msgid "<![CDATA[nano /etc/inittab]]>"
 msgstr ""
 
 #. Tag: para
-#: nextsteps.xml:214
+#: nextsteps.xml:220
 #, no-c-format
 msgid ""
 "Find the line that includes the text <literal>initdefault</literal>. Change "
@@ -20725,7 +20876,7 @@ msgstr ""
 "numer <literal>3</literal> na <literal>5</literal>."
 
 #. Tag: para
-#: nextsteps.xml:219
+#: nextsteps.xml:225
 #, no-c-format
 msgid ""
 "Hit <keycombo><keycap>Ctrl</keycap><keycap>O</keycap></keycombo> to write "
@@ -20737,14 +20888,14 @@ msgstr ""
 "keycap><keycap>X</keycap></keycombo>, aby zakoÅ„czyÄ‡ program."
 
 #. Tag: para
-#: nextsteps.xml:228
+#: nextsteps.xml:234
 #, no-c-format
 msgid "Type <command>exit</command> to logout of the administrator account."
 msgstr ""
 "Podaj <command>exit</command>, aby wylogowaÄ‡ siÄ™ z konta administratora."
 
 #. Tag: para
-#: nextsteps.xml:233
+#: nextsteps.xml:239
 #, no-c-format
 msgid ""
 "If desired, you can reboot the system using the <command>reboot</command> "
@@ -20755,7 +20906,7 @@ msgstr ""
 "graficzne logowanie."
 
 #. Tag: para
-#: nextsteps.xml:238
+#: nextsteps.xml:244
 #, no-c-format
 msgid ""
 "If you encounter any problems with the graphical login, consult one of the "
@@ -20765,13 +20916,13 @@ msgstr ""
 "jednym ze ÅºrÃ³deÅ‚ pomocy z <xref linkend=\"sn-additional-help\"/>."
 
 #. Tag: title
-#: nextsteps.xml:245
+#: nextsteps.xml:251
 #, no-c-format
 msgid "Subscribing to Fedora Announcements and News"
 msgstr "Subskrybowanie ogÅ‚oszeÅ„ i wiadomoÅ›ci Fedory"
 
 #. Tag: para
-#: nextsteps.xml:247
+#: nextsteps.xml:253
 #, no-c-format
 msgid ""
 "To receive information about package updates, subscribe to either the "
@@ -20781,19 +20932,19 @@ msgstr ""
 "mailingowÄ… ogÅ‚oszeÅ„ lub kanaÅ‚y RSS."
 
 #. Tag: term
-#: nextsteps.xml:254
+#: nextsteps.xml:260
 #, no-c-format
 msgid "Fedora Project announcements mailing list"
 msgstr "Lista mailingowa ogÅ‚oszeÅ„ Projektu Fedora"
 
 #. Tag: term
-#: nextsteps.xml:265
+#: nextsteps.xml:271
 #, no-c-format
 msgid "Fedora Project RSS feeds"
 msgstr "KanaÅ‚y RSS Projektu Fedora"
 
 #. Tag: para
-#: nextsteps.xml:276
+#: nextsteps.xml:282
 #, no-c-format
 msgid ""
 "The announcements mailing list also provides you with news on the Fedora "
@@ -20803,13 +20954,13 @@ msgstr ""
 "Projekcie Fedora."
 
 #. Tag: title
-#: nextsteps.xml:282
+#: nextsteps.xml:288
 #, no-c-format
 msgid "Security Announcements"
 msgstr "OgÅ‚oszenia zwiÄ…zane z bezpieczeÅ„stwem"
 
 #. Tag: para
-#: nextsteps.xml:284
+#: nextsteps.xml:290
 #, no-c-format
 msgid ""
 "Announcements with the keyword <wordasword>[SECURITY]</wordasword> in the "
@@ -20819,13 +20970,13 @@ msgstr ""
 "dotyczÄ… aktualizacji pakietÃ³w, ktÃ³re rozwiÄ…zujÄ… problemy bezpieczeÅ„stwa."
 
 #. Tag: title
-#: nextsteps.xml:292
+#: nextsteps.xml:298
 #, no-c-format
 msgid "Finding Documentation and Support"
 msgstr "Dokumentacja i wsparcie"
 
 #. Tag: para
-#: nextsteps.xml:294
+#: nextsteps.xml:300
 #, no-c-format
 msgid ""
 "Members of the Fedora community provide support through mailing lists, Web "
@@ -20835,7 +20986,7 @@ msgstr ""
 "fora WWW i grupy uÅ¼ytkownikÃ³w Linuksa (LUG-i) na caÅ‚ym Å›wiecie."
 
 #. Tag: para
-#: nextsteps.xml:299
+#: nextsteps.xml:305
 #, fuzzy, no-c-format
 msgid ""
 "The Web site for the formally endorsed forums is <ulink url=\"http://forums."
@@ -20845,31 +20996,31 @@ msgstr ""
 "\"/>."
 
 #. Tag: para
-#: nextsteps.xml:304
+#: nextsteps.xml:310
 #, no-c-format
 msgid "The following resources provide information on many aspects of Fedora:"
 msgstr "NastÄ™pujÄ…ce zasoby podajÄ… informacje o wielu cechach Fedory:"
 
 #. Tag: term
-#: nextsteps.xml:313
+#: nextsteps.xml:319
 #, no-c-format
 msgid "The FAQ on the Fedora Project website"
 msgstr "FAQ na stronach WWW Projektu Fedora"
 
 #. Tag: term
-#: nextsteps.xml:327
+#: nextsteps.xml:333
 #, no-c-format
 msgid "The documents available from the Fedora Documentation Project Web site"
 msgstr "Dokumenty dostÄ™pne na stronie WWW Projektu dokumentacji Fedory"
 
 #. Tag: term
-#: nextsteps.xml:341
+#: nextsteps.xml:347
 #, no-c-format
 msgid "The Linux Documentation Project (LDP)"
 msgstr "Projekt dokumentacji Linuksa (LDP)"
 
 #. Tag: term
-#: nextsteps.xml:355
+#: nextsteps.xml:361
 #, no-c-format
 msgid ""
 "The Red Hat Enterprise Linux documentation, much of which also applies to "
@@ -20879,7 +21030,7 @@ msgstr ""
 "Fedory"
 
 #. Tag: para
-#: nextsteps.xml:369
+#: nextsteps.xml:375
 #, fuzzy, no-c-format
 msgid ""
 "Many other organizations and individuals also provide tutorials and HOWTOs "
@@ -20893,13 +21044,13 @@ msgstr ""
 "com/linux\"/>."
 
 #. Tag: title
-#: nextsteps.xml:377
+#: nextsteps.xml:383
 #, no-c-format
 msgid "Joining the Fedora Community"
 msgstr "DoÅ‚Ä…cz do spoÅ‚ecznoÅ›ci Fedory"
 
 #. Tag: para
-#: nextsteps.xml:379
+#: nextsteps.xml:385
 #, no-c-format
 msgid ""
 "The Fedora Project is driven by the individuals that contribute to it. "
@@ -20915,7 +21066,7 @@ msgstr ""
 "sÄ… dostÄ™pne dla wszystkich."
 
 #. Tag: para
-#: nextsteps.xml:387
+#: nextsteps.xml:393
 #, no-c-format
 msgid "To make a difference, start here:"
 msgstr "PrzyÅ‚Ä…cz siÄ™:"
@@ -21031,6 +21182,58 @@ msgstr ""
 msgid "installing packages"
 msgstr ""
 
+#. Tag: term
+#: Package_Selection_common-list-1.xml:9
+#, no-c-format
+msgid "Office and Productivity"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_common-list-1.xml:11
+#, no-c-format
+msgid ""
+"This option provides the OpenOffice.org productivity suite, the Planner "
+"project management application, graphical tools such as the GIMP, and "
+"multimedia applications."
+msgstr ""
+
+#. Tag: term
+#: Package_Selection_common-list-1.xml:20
+#, fuzzy, no-c-format
+msgid "Software Development"
+msgstr "Instalacja oprogramowania"
+
+#. Tag: para
+#: Package_Selection_common-list-1.xml:22
+#, no-c-format
+msgid ""
+"This option provides the necessary tools to compile software on your Fedora "
+"system."
+msgstr ""
+
+#. Tag: term
+#: Package_Selection_common-list-1.xml:30
+#, fuzzy, no-c-format
+msgid "Web server"
+msgstr "Serwer FTP"
+
+#. Tag: para
+#: Package_Selection_common-list-1.xml:32
+#, no-c-format
+msgid "This option provides the Apache Web server."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_common-note-1.xml:9
+#, no-c-format
+msgid ""
+"If you install from a Fedora Live image, you cannot make package selections. "
+"This installation method transfers a copy of the Live image rather than "
+"installing packages from a repository. To change the package selection, "
+"complete the installation, then use the <application>Add/Remove Software</"
+"application> application to make desired changes."
+msgstr ""
+
 #. Tag: para
 #: Package_Selection_common-note-2.xml:9
 #, no-c-format
@@ -21082,20 +21285,43 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Package_Selection_common-para-5.xml:8
+#: Package_Selection_common-para-7.xml:7
+#, no-c-format
+msgid ""
+"By default, the Fedora installation process loads a selection of software "
+"that is suitable for a desktop system. To include or remove software for "
+"common tasks, select the relevant items from the list:"
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Customizing-x86.xml:8
+#, fuzzy, no-c-format
+msgid "Customizing the Software Selection"
+msgstr "Instalacja oprogramowania"
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:9
+#, no-c-format
+msgid ""
+"Select <guilabel>Customize now</guilabel> to specify the software packages "
+"for your final system in more detail. This option causes the installation "
+"process to display an additional customization screen when you select "
+"<guibutton>Next</guibutton>."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Customizing-x86.xml:16
 #, no-c-format
-msgid "Select each component you wish to install."
+msgid "Installing Support for Additional Languages"
 msgstr ""
 
 #. Tag: para
-#: Package_Selection_common-para-6.xml:8
+#: Package_Selection_Customizing-x86.xml:18
 #, no-c-format
 msgid ""
-"Once a package group has been selected, if optional components are available "
-"you can click on <guilabel>Optional packages</guilabel> to view which "
-"packages are installed by default, and to add or remove optional packages "
-"from that group. If there are no optional components this button will be "
-"disabled."
+"Select <guilabel>Customize now</guilabel> to install support for additional "
+"languages. Refer to <xref linkend=\"sn-lang-packages\"/> for more "
+"information on configuring language support."
 msgstr ""
 
 #. Tag: title
@@ -21104,20 +21330,198 @@ msgstr ""
 msgid "Package Group Details"
 msgstr ""
 
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:37
+#, no-c-format
+msgid ""
+"Fedora divides the included software into <indexterm> <primary>package "
+"groups</primary> </indexterm> <firstterm>package groups</firstterm>. For "
+"ease of use, the package selection screen displays these groups as "
+"categories."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:49
+#, no-c-format
+msgid ""
+"To view the package groups for a category, select the category from the list "
+"on the left. The list on the right displays the package groups for the "
+"currently selected category."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:55
+#, no-c-format
+msgid ""
+"To specify a package group for installation, select the check box next to "
+"the group. The box at the bottom of the screen displays the details of the "
+"package group that is currently highlighted. <emphasis>None</emphasis> of "
+"the packages from a group will be installed unless the check box for that "
+"group is selected."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:63
+#, no-c-format
+msgid ""
+"If you select a package group, Fedora automatically installs the base and "
+"mandatory packages for that group. To change which optional packages within "
+"a selected group will be installed, select the <guibutton>Optional Packages</"
+"guibutton> button under the description of the group. Then use the check box "
+"next to an individual package name to change its selection."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:71
+#, no-c-format
+msgid ""
+"After you choose the desired packages, select <guilabel>Next</guilabel> to "
+"proceed. Fedora checks your selection, and automatically adds any extra "
+"packages required to use the software you select. When you have finished "
+"selecting packages, click <guilabel>Close</guilabel> to save your optional "
+"package selections and return to the main package selection screen."
+msgstr ""
+
 #. Tag: title
-#: packageselection.xml:10
+#: Package_Selection_Customizing-x86.xml:81
+#, no-c-format
+msgid "Changing Your Mind"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:82
+#, no-c-format
+msgid ""
+"The packages that you select are not permanent. After you boot your system, "
+"use the <application>Add/Remove Software</application> tool to either "
+"install new software or remove installed packages. To run this tool, from "
+"the main menu, select <menuchoice> <guimenu>System</guimenu> "
+"<guisubmenu>Administration</guisubmenu> <guimenuitem>Add/Remove Software</"
+"guimenuitem> </menuchoice>. The Fedora software management system downloads "
+"the latest packages from network servers, rather than using those on the "
+"installation discs."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Customizing-x86.xml:96
 #, fuzzy, no-c-format
-msgid "Software Selection"
-msgstr "Instalacja oprogramowania"
+msgid "Additional Language Support"
+msgstr "ObsÅ‚uga dÅºwiÄ™ku"
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:98
+#, no-c-format
+msgid ""
+"Your Fedora system automatically supports the language that you selected at "
+"the start of the installation process. To include support for additional "
+"languages, select the package group for those languages from the "
+"<guilabel>Languages</guilabel> category."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Customizing-x86.xml:108
+#, no-c-format
+msgid "Core Network Services"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:110
+#, no-c-format
+msgid "All Fedora installations include the following network services:"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:117
+#, no-c-format
+msgid "centralized logging through syslog"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:122
+#, no-c-format
+msgid "email through SMTP (Simple Mail Transfer Protocol)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:127
+#, no-c-format
+msgid "network file sharing through NFS (Network File System)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:132
+#, no-c-format
+msgid "remote access through SSH (Secure SHell)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:137
+#, no-c-format
+msgid "resource advertising through mDNS (multicast DNS)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:143
+#, no-c-format
+msgid "The default installation also provides:"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:149
+#, no-c-format
+msgid "network file transfer through HTTP (HyperText Transfer Protocol)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:155
+#, no-c-format
+msgid "printing through CUPS (Common UNIX Printing System)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:160
+#, no-c-format
+msgid "remote desktop access through VNC (Virtual Network Computing)"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Customizing-x86.xml:167
+#, no-c-format
+msgid ""
+"Some automated processes on your Fedora system use the email service to send "
+"reports and messages to the system administrator. By default, the email, "
+"logging, and printing services do not accept connections from other systems. "
+"Fedora installs the NFS sharing, HTTP, and VNC components without enabling "
+"those services."
+msgstr ""
 
 #. Tag: para
-#: packageselection.xml:68
+#: Package_Selection_Customizing-x86.xml:176
 #, no-c-format
 msgid ""
-"The Fedora software repository is automatically selected for you. The "
-"<guilabel>Additional Fedora Software</guilabel> repository contains software "
-"beyond the selection found on the default installation source. All software "
-"in Fedora is entirely free and open source."
+"You may configure your Fedora system after installation to offer email, file "
+"sharing, logging, printing and remote desktop access services. The SSH "
+"service is enabled by default. You may use NFS to access files on other "
+"systems without enabling the NFS sharing service."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Repositories-x86.xml:8
+#, fuzzy, no-c-format
+msgid "Installing from Additional Repositories"
+msgstr "Instalowanie z innego ÅºrÃ³dÅ‚a"
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:9
+#, no-c-format
+msgid ""
+"You can define additional <firstterm>repositories</firstterm> to increase "
+"the software available to your system during installation. A repository is a "
+"network location that stores software packages along with "
+"<firstterm>metadata</firstterm> that describes them. Many of the software "
+"packages used in Fedora require other software to be installed. The "
+"installer uses the metadata to ensure that these requirements are met for "
+"every piece of software you select for installation."
 msgstr ""
 
 #. Tag: para
@@ -21168,12 +21572,114 @@ msgid "Adding a software repository"
 msgstr ""
 
 #. Tag: para
-#: Package_Selection-x86.xml:49
+#: Package_Selection_Repositories-x86.xml:50
+#, no-c-format
+msgid ""
+"To include software from <firstterm>repositories</firstterm> other than the "
+"Fedora package collection, select <guilabel>Add additional software "
+"repositories</guilabel>. You may provide the location of a repository of "
+"third-party software. Depending on the configuration of that repository, you "
+"may be able to select non-Fedora software during installation."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:58
+#, no-c-format
+msgid ""
+"To edit an existing software repository location, select the repository in "
+"the list and then select <guilabel>Modify repository</guilabel>."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Repositories-x86.xml:64
+#, fuzzy, no-c-format
+msgid "Network Access Required"
+msgstr "Wymagane jest poÅ‚Ä…czenie sieciowe"
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:65
+#, no-c-format
+msgid ""
+"If you change the repository information during a non-network installation, "
+"such as from a Fedora DVD, the installer prompts you for network "
+"configuration information."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:71
+#, no-c-format
+msgid ""
+"If you select <guilabel>Add additional software repositories</guilabel>, the "
+"<guilabel>Edit repository</guilabel> dialog appears. Provide a "
+"<guilabel>Repository name</guilabel> and the <guilabel>Repository URL</"
+"guilabel> for its location."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Repositories-x86.xml:78
+#, fuzzy, no-c-format
+msgid "Fedora Software Mirrors"
+msgstr "Z serwera lustrzanego"
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:79
+#, fuzzy, no-c-format
+msgid ""
+"To find a Fedora software mirror near you, refer to <ulink url=\"http://"
+"fedoraproject.org/wiki/Mirrors\"></ulink>."
+msgstr ""
+"Aby poznaÄ‡ dodatkowe ÅºrÃ³dÅ‚a pomocy dla Fedory, odwiedÅº <ulink url=\"http://"
+"fedoraproject.org/wiki/Communicate\"/>."
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:81
+#, no-c-format
+msgid ""
+"Once you have located a mirror, to determine the URL to use, find the "
+"directory on the mirror that <emphasis>contains</emphasis> a directory named "
+"<filename class=\"directory\">repodata</filename>. For instance, the "
+"\"Everything\" repository for Fedora is typically located in a directory "
+"tree <filename>releases/&PRODVER;/Everything/<replaceable>arch</replaceable>/"
+"os</filename>, where <replaceable>arch</replaceable> is a system "
+"architecture name."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:90
+#, no-c-format
+msgid ""
+"Once you provide information for an additional repository, the installer "
+"reads the package metadata over the network. Software that is specially "
+"marked is then included in the package group selection system. See <xref "
+"linkend=\"sn-package-selection\"/> for more information on selecting "
+"packages."
+msgstr ""
+
+#. Tag: title
+#: Package_Selection_Repositories-x86.xml:98
 #, no-c-format
+msgid "Backtracking Removes Repository Metadata"
+msgstr ""
+
+#. Tag: para
+#: Package_Selection_Repositories-x86.xml:99
+#, no-c-format
+msgid ""
+"If you choose <guilabel>Back</guilabel> from the package selection screen, "
+"any extra repository data you may have entered is lost. This allows you to "
+"effectively cancel extra repositories. Currently there is no way to cancel "
+"only a single repository once entered."
+msgstr ""
+
+#. Tag: para
+#: Package_Selection-x86.xml:49
+#, fuzzy, no-c-format
 msgid ""
 "If you choose to accept the current package list, skip ahead to <xref "
-"linkend=\"s1-preparetoinstall-x86\"/>."
+"linkend=\"s1-installpkgs-x86\"/>."
 msgstr ""
+"JeÅ›li instalujesz przez NFS, przejdÅº do <xref linkend=\"sn-nfs-install-"
+"settings\"/>."
 
 #. Tag: para
 #: Package_Selection-x86.xml:53
@@ -23003,387 +23509,290 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Prepare_To_Install_common.xml:6
-#, no-c-format
-msgid "Prepare to Install"
-msgstr ""
-
-#. Tag: para
-#: Prepare_To_Install_common.xml:9
+#: Preface.xml:6
 #, no-c-format
-msgid "A screen preparing you for the installation of Fedora now appears."
+msgid "Preface"
 msgstr ""
 
-#. Tag: para
-#: Prepare_To_Install_common.xml:13
+#. Tag: title
+#: pxe-server-manual.xml:6
 #, no-c-format
-msgid ""
-"For your reference, a complete log of your installation can be found in "
-"<filename>/root/install.log</filename> once you reboot your system."
+msgid "Manually configure a PXE server"
 msgstr ""
 
 #. Tag: primary
-#: Prepare_To_Install_common.xml:17
-#, no-c-format
-msgid "install log file"
-msgstr ""
-
-#. Tag: filename
-#: Prepare_To_Install_common.xml:18 Prepare_To_Install_common.xml:22
+#: pxe-server-manual.xml:8 pxe-server-manual.xml:54 pxe-server-manual.xml:64
+#: pxe-server-manual.xml:266 pxe-server-manual.xml:398
+#: pxe-server-manual.xml:408
 #, no-c-format
-msgid "/root/install.log"
+msgid "PXE installations"
 msgstr ""
 
 #. Tag: secondary
-#: Prepare_To_Install_common.xml:24
-#, no-c-format
-msgid "install log file location"
-msgstr ""
+#: pxe-server-manual.xml:9
+#, fuzzy, no-c-format
+msgid "overview"
+msgstr "PrzeglÄ…d"
 
 #. Tag: para
-#: Prepare_To_Install_common.xml:28
-#, no-c-format
+#: pxe-server-manual.xml:11
+#, fuzzy, no-c-format
 msgid ""
-"To cancel this installation process, press your computer's Reset button or "
-"use the <keycombo><keycap>Control</keycap><keycap>Alt</"
-"keycap><keycap>Delete</keycap></keycombo> key combination to restart your "
-"machine."
-msgstr ""
-
-#. Tag: title
-#: Prepare_To_Install_common-title-1.xml:8
-#, no-c-format
-msgid "Preparing to Install"
-msgstr ""
-
-#. Tag: title
-#: Pxe.xml:5
-#, no-c-format
-msgid "PXE Network Installations"
-msgstr ""
-
-#. Tag: secondary
-#: Pxe.xml:8
-#, no-c-format
-msgid "<secondary>PXE</secondary>"
-msgstr ""
-
-#. Tag: see
-#: Pxe.xml:9
-#, no-c-format
-msgid "<see>PXE installations</see>"
-msgstr ""
-
-#. Tag: primary
-#: Pxe.xml:12
-#, no-c-format
-msgid "<primary>PXE</primary>"
-msgstr ""
-
-#. Tag: primary
-#: Pxe.xml:15
-#, no-c-format
-msgid "Pre-Execution Environment"
-msgstr ""
+"The following steps must be performed to prepare for a PXE installation:"
+msgstr "PoniÅ¼sze opcje sÄ… zwykle przydatne dla instalacji bez noÅ›nikÃ³w:"
 
 #. Tag: para
-#: Pxe.xml:21
+#: pxe-server-manual.xml:16
 #, no-c-format
 msgid ""
-"&PROD; allows for installation over a network using the NFS, FTP, or HTTP "
-"protocols. A network installation can be started from a boot CD-ROM, a "
-"bootable flash memory drive, or by using the <command>askmethod</command> "
-"boot option with the &PROD; CD #1. Alternatively, if the system to be "
-"installed contains a network interface card (NIC) with Pre-Execution "
-"Environment (PXE) support, it can be configured to boot from files on "
-"another networked system rather than local media such as a CD-ROM."
+"Configure the network (NFS, FTP, HTTP) server to export the installation "
+"tree."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:83
+#: pxe-server-manual.xml:22
 #, no-c-format
 msgid ""
-"First, configure an NFS, FTP, or HTTP server to export the entire "
-"installation tree for the version and variant of &PROD; to be installed. "
-"Refer to the section <citetitle>Preparing for a Network Installation</"
-"citetitle> in the <citetitle>&PROD; Installation Guide</citetitle> for "
-"detailed instructions."
+"Configure the files on the <command>tftp</command> server necessary for PXE "
+"booting."
 msgstr ""
 
-#. Tag: title
-#: Pxe.xml:199 Pxe.xml:361
+#. Tag: para
+#: pxe-server-manual.xml:28
 #, no-c-format
-msgid "Command Line Configuration"
+msgid "Configure which hosts are allowed to boot from the PXE configuration."
 msgstr ""
 
-#. Tag: application
-#: Pxe.xml:201 Pxe.xml:363
-#, no-c-format
-msgid "Network Booting Tool"
+#. Tag: para
+#: pxe-server-manual.xml:34
+#, fuzzy, no-c-format
+msgid "Start the <command>tftp</command> service."
 msgstr ""
+"Ponownie uruchom usÅ‚ugÄ™ <command>syslogd</command>, aby zastosowaÄ‡ zmianÄ™:"
 
-#. Tag: command
-#: Pxe.xml:203 Pxe.xml:207
+#. Tag: para
+#: pxe-server-manual.xml:40
 #, no-c-format
-msgid "pxeos"
+msgid "Configure DHCP."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:210
-#, no-c-format
-msgid ""
-"If the network server is not running X, the <command>pxeos</command> command "
-"line utility, which is part of the <filename>system-config-netboot</"
-"filename> package, can be used to configure the <command>tftp</command> "
-"server files as described in <xref linkend=\"s1-netboot-tftp\"/>:"
-msgstr ""
+#: pxe-server-manual.xml:46
+#, fuzzy, no-c-format
+msgid "Boot the client, and start the installation."
+msgstr "WÅ‚Ä…czenia komputera i uruchomienia procesu instalacji."
 
-#. Tag: screen
-#: Pxe.xml:214
-#, no-c-format
-msgid ""
-"pxeos -a -i \"<replaceable><description></replaceable>\" -p <NFS|"
-"HTTP|FTP> -D 0 -s <replaceable>client.example.com</replaceable> \\ \n"
-"-L <replaceable><net-location></replaceable> -k <replaceable><"
-"kernel></replaceable> -K <replaceable><kickstart></replaceable> "
-"<replaceable><os-identifer></replaceable>"
-msgstr ""
+#. Tag: title
+#: pxe-server-manual.xml:52
+#, fuzzy, no-c-format
+msgid "Setting up the Network Server"
+msgstr "Ustawianie serwera instalacji"
 
-#. Tag: para
-#: Pxe.xml:215 Pxe.xml:376
-#, no-c-format
-msgid "The following list explains the options:"
-msgstr ""
+#. Tag: secondary
+#: pxe-server-manual.xml:55
+#, fuzzy, no-c-format
+msgid "setting up the network server"
+msgstr "Ustawianie serwera instalacji"
 
 #. Tag: para
-#: Pxe.xml:221
+#: pxe-server-manual.xml:57
 #, no-c-format
 msgid ""
-"<option>-a</option> — Specifies that an OS instance is being added to "
-"the PXE configuration."
+"First, configure an NFS, FTP, or HTTP server to export the entire "
+"installation tree for the version and variant of Fedora to be installed. "
+"Refer to <xref linkend=\"s1-steps-network-installs-x86\"/> for detailed "
+"instructions."
 msgstr ""
 
+#. Tag: title
+#: pxe-server-manual.xml:62
+#, fuzzy, no-c-format
+msgid "PXE Boot Configuration"
+msgstr "WybÃ³r strefy czasowej"
+
 #. Tag: para
-#: Pxe.xml:227
+#: pxe-server-manual.xml:67
 #, no-c-format
 msgid ""
-"<option>-i</option> \"<replaceable><description></replaceable>\" "
-"— Replace \"<replaceable><description></replaceable>\" with a "
-"description of the OS instance."
+"The next step is to copy the files necessary to start the installation to "
+"the <command>tftp</command> server so they can be found when the client "
+"requests them. The <command>tftp</command> server is usually the same server "
+"as the network server exporting the installation tree."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:234
+#: pxe-server-manual.xml:72
 #, no-c-format
 msgid ""
-"<option>-p</option> <NFS|HTTP|FTP> — Specify which of the NFS, "
-"FTP, or HTTP protocols to use for installation. Only one may be specified."
+"To copy these files, run the <application>Network Booting Tool</application> "
+"on the NFS, FTP, or HTTP server. A separate PXE server is not necessary."
 msgstr ""
 
-#. Tag: para
-#: Pxe.xml:241
+#. Tag: title
+#: pxe-server-manual.xml:264
 #, no-c-format
-msgid ""
-"<option>-D</option> <0|1> — Specify \"<command>0</command>\" "
-"which indicates that it is <emphasis>not</emphasis> a diskless configuration "
-"since <command>pxeos</command> can be used to configure a diskless "
-"environment as well."
+msgid "Adding PXE Hosts"
 msgstr ""
 
-#. Tag: para
-#: Pxe.xml:248
+#. Tag: secondary
+#: pxe-server-manual.xml:267
 #, no-c-format
-msgid ""
-"<option>-s</option> <replaceable>client.example.com</replaceable> — "
-"Provide the name of the NFS, FTP, or HTTP server after the <option>-s</"
-"option> option."
+msgid "adding hosts"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:255
+#: pxe-server-manual.xml:269
 #, no-c-format
 msgid ""
-"<option>-L</option> <replaceable><net-location></replaceable> — "
-"Provide the location of the installation tree on that server after the "
-"<option>-L</option> option."
+"After configuring the network server, the interface as shown in <xref "
+"linkend=\"fig-netboot-add-hosts\"/> is displayed."
 msgstr ""
 
-#. Tag: para
-#: Pxe.xml:262
+#. Tag: title
+#: pxe-server-manual.xml:272
 #, no-c-format
-msgid ""
-"<option>-k</option> <replaceable><kernel></replaceable> — "
-"Provide the specific kernel version of the server installation tree for "
-"booting."
+msgid "<title>Add Hosts</title>"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:268
+#: pxe-server-manual.xml:275
 #, no-c-format
-msgid ""
-"<option>-K</option> <replaceable><kickstart></replaceable> — "
-"Provide the location of the kickstart file, if available."
+msgid "<para>Add Hosts</para>"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:274
+#: pxe-server-manual.xml:281
 #, no-c-format
 msgid ""
-"<replaceable><os-identifer></replaceable> — Specify the OS "
-"identifier, which is used as the directory name in the <filename>/tftpboot/"
-"linux-install/</filename> directory."
+"The next step is to configure which hosts are allowed to connect to the PXE "
+"boot server."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:281
-#, no-c-format
-msgid ""
-"If FTP is selected as the installation protocol and anonymous login is not "
-"available, specify a username and password for login, with the following "
-"options before <replaceable><os-identifer></replaceable> in the "
-"previous command:"
+#: pxe-server-manual.xml:285
+#, fuzzy, no-c-format
+msgid "To add hosts, click the <guibutton>New</guibutton> button."
 msgstr ""
+"Po podjÄ™ciu decyzji naciÅ›nij <guibutton>Dalej</guibutton>, aby kontynuowaÄ‡."
 
-#. Tag: screen
-#: Pxe.xml:284
+#. Tag: title
+#: pxe-server-manual.xml:288
 #, no-c-format
-msgid ""
-"-A 0 -u <replaceable><username></replaceable> -p <replaceable><"
-"password></replaceable>"
+msgid "<title>Add a Host</title>"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:285
+#: pxe-server-manual.xml:291
 #, no-c-format
-msgid ""
-"For more information on command line options available for the "
-"<command>pxeos</command> command, refer to the <command>pxeos</command> man "
-"page."
+msgid "<para>Add a Host</para>"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:308
+#: pxe-server-manual.xml:297
 #, no-c-format
-msgid ""
-"The next step is to configure which hosts are allowed to connect to the PXE "
-"boot server. For the command line version of this step, refer to <xref "
-"linkend=\"s2-netboot-pxeboot\"/>."
-msgstr ""
-
-#. Tag: command
-#: Pxe.xml:365 Pxe.xml:369
-#, no-c-format
-msgid "pxeboot"
+msgid "Enter the following information:"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:372
+#: pxe-server-manual.xml:303
 #, no-c-format
 msgid ""
-"If the network server is not running X, the <command>pxeboot</command> "
-"utility, a part of the <filename>system-config-netboot</filename> package, "
-"can be used to add hosts which are allowed to connect to the PXE server:"
+"<guilabel>Hostname or IP Address/Subnet</guilabel> — The IP address, "
+"fully qualified hostname, or a subnet of systems that should be allowed to "
+"connect to the PXE server for installations."
 msgstr ""
 
-#. Tag: screen
-#: Pxe.xml:375
+#. Tag: para
+#: pxe-server-manual.xml:309
 #, no-c-format
 msgid ""
-"pxeboot -a -K <replaceable><kickstart></replaceable> -O "
-"<replaceable><os-identifier></replaceable> -r <replaceable><"
-"value></replaceable> <replaceable><host></replaceable>"
+"<guilabel>Operating System</guilabel> — The operating system "
+"identifier to install on this client. The list is populated from the network "
+"install instances created from the <guilabel>Network Installation Dialog</"
+"guilabel>."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:382
+#: pxe-server-manual.xml:316
 #, no-c-format
-msgid "<option>-a</option> — Specifies that a host is to be added."
+msgid ""
+"<guilabel>Serial Console</guilabel> — This option allows use of a "
+"serial console."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:388
+#: pxe-server-manual.xml:322
 #, no-c-format
 msgid ""
-"<option>-K</option> <replaceable><kickstart></replaceable> — The "
-"location of the kickstart file, if available."
+"<guilabel>Kickstart File</guilabel> — The location of a kickstart file "
+"to use, such as <userinput>http://server.example.com/kickstart/ks.cfg</"
+"userinput>. This file can be created with the <application>Kickstart "
+"Configurator</application>. Refer to <xref linkend=\"ch-redhat-config-"
+"kickstart\"/> for details."
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:394
+#: pxe-server-manual.xml:329
 #, no-c-format
 msgid ""
-"<option>-O</option> <replaceable><os-identifier></replaceable> — "
-"Specifies the operating system identifier as defined in <xref linkend=\"s1-"
-"netboot-pxe-config\"/>."
+"Ignore the <guilabel>Snapshot name</guilabel> and <guilabel>Ethernet</"
+"guilabel> options. They are only used for diskless environments."
 msgstr ""
 
-#. Tag: para
-#: Pxe.xml:400
+#. Tag: title
+#: pxe-server-manual.xml:391
 #, no-c-format
-msgid ""
-"<option>-r</option> <replaceable><value></replaceable> — "
-"Specifies the ram disk size."
+msgid "TFTPD"
 msgstr ""
 
-#. Tag: para
-#: Pxe.xml:406
+#. Tag: title
+#: pxe-server-manual.xml:396
 #, no-c-format
-msgid ""
-"<replaceable><host></replaceable> — Specifies the IP address or "
-"hostname of the host to add."
+msgid "Adding a Custom Boot Message"
 msgstr ""
 
-#. Tag: para
-#: Pxe.xml:412
+#. Tag: secondary
+#: pxe-server-manual.xml:399
 #, no-c-format
-msgid ""
-"For more information on command line options available for the "
-"<command>pxeboot</command> command, refer to the <command>pxeboot</command> "
-"man page."
+msgid "boot message, custom"
 msgstr ""
 
 #. Tag: para
-#: Pxe.xml:442
+#: pxe-server-manual.xml:401
 #, no-c-format
 msgid ""
-"After the system boots the installation program, refer to the "
-"<citetitle>&PROD; Installation Guide</citetitle>."
+"Optionally, modify <filename>/tftpboot/linux-install/msgs/boot.msg</"
+"filename> to use a custom boot message."
 msgstr ""
 
 #. Tag: title
-#: pxe-server-manual.xml:6
-#, no-c-format
-msgid "Manually configure a PXE server"
-msgstr ""
-
-#. Tag: primary
-#: pxe-server-manual.xml:8 pxe-server-manual.xml:54 pxe-server-manual.xml:64
-#: pxe-server-manual.xml:266 pxe-server-manual.xml:398
-#: pxe-server-manual.xml:408
-#, no-c-format
-msgid "PXE installations"
-msgstr ""
+#: pxe-server-manual.xml:406
+#, fuzzy, no-c-format
+msgid "Performing the PXE Installation"
+msgstr "Przerywanie instalacji"
 
 #. Tag: para
-#: pxe-server-manual.xml:57
+#: pxe-server-manual.xml:411
 #, no-c-format
 msgid ""
-"First, configure an NFS, FTP, or HTTP server to export the entire "
-"installation tree for the version and variant of Fedora to be installed. "
-"Refer to <xref linkend=\"s1-steps-network-installs-x86\"/> for detailed "
-"instructions."
+"For instructions on how to configure the network interface card with PXE "
+"support to boot from the network, consult the documentation for the NIC. It "
+"varies slightly per card."
 msgstr ""
 
 #. Tag: para
-#: pxe-server-manual.xml:281
+#: pxe-server-manual.xml:414
 #, no-c-format
 msgid ""
-"The next step is to configure which hosts are allowed to connect to the PXE "
-"boot server."
+"If your NIC does not support PXE booting, you can still PXE boot your system "
+"by using the <application>gPXE</application> bootloader. The Fedora Project "
+"does not distribute <application>gPXE</application> — refer to the "
+"Etherboot Project website at <ulink url=\"http://etherboot.org/wiki/start"
+"\"></ulink> for more information."
 msgstr ""
 
 #. Tag: para
-#: pxe-server-manual.xml:415
+#: pxe-server-manual.xml:417
 #, no-c-format
 msgid ""
 "After the system boots the installation program, refer to the <xref linkend="
@@ -23403,6 +23812,20 @@ msgid ""
 "another networked system rather than local media such as a CD-ROM."
 msgstr ""
 
+#. Tag: para
+#: pxe-server-para-2.xml:5
+#, no-c-format
+msgid ""
+"For a PXE network installation, the client's NIC with PXE support sends out "
+"a broadcast request for DHCP information. The DHCP server provides the "
+"client with an IP address, other network information such as name server, "
+"the IP address or hostname of the <command>tftp</command> server (which "
+"provides the files necessary to start the installation program), and the "
+"location of the files on the <command>tftp</command> server. This is "
+"possible because of PXELINUX, which is part of the <filename>syslinux</"
+"filename> package."
+msgstr ""
+
 #. Tag: title
 #: pxe-server.xml:7
 #, no-c-format
@@ -23712,7 +24135,7 @@ msgstr ""
 #: pxe-server.xml:120
 #, fuzzy, no-c-format
 msgid ""
-"http://mirror.example.com/pub/fedora/linux/releases/11/Fedora/"
+"http://mirror.example.com/pub/fedora/linux/releases/&PRODVER;/Fedora/"
 "<replaceable>arch</replaceable>/os"
 msgstr ""
 "http://serwerlustrzany.przykÅ‚ad.pl/pub/fedora/linux/releases/10/Fedora/"
@@ -23722,7 +24145,7 @@ msgstr ""
 #: pxe-server.xml:123
 #, fuzzy, no-c-format
 msgid ""
-"ftp://mirror.example.com/pub/fedora/linux/releases/11/Fedora/"
+"ftp://mirror.example.com/pub/fedora/linux/releases/&PRODVER;/Fedora/"
 "<replaceable>arch</replaceable>/os"
 msgstr ""
 "ftp://serwerlustrzany.przykÅ‚ad.pl/pub/fedora/linux/releases/10/Fedora/"
@@ -23732,7 +24155,7 @@ msgstr ""
 #: pxe-server.xml:126
 #, fuzzy, no-c-format
 msgid ""
-"rsync://mirror.example.com/fedora/linux/releases/11/Fedora/"
+"rsync://mirror.example.com/fedora/linux/releases/&PRODVER;/Fedora/"
 "<replaceable>arch</replaceable>/os"
 msgstr ""
 "rsync://serwerlustrzany.przykÅ‚ad.pl/fedora/linux/releases/10/Fedora/"
@@ -24232,17 +24655,22 @@ msgstr ""
 msgid "The following message is displayed:"
 msgstr ""
 
-#. Tag: computeroutput
+#. Tag: screen
 #: Rescue_Mode.xml:162
 #, no-c-format
 msgid ""
-"The rescue environment will now attempt to find your Linux installation and "
-"mount it under the directory /mnt/sysimage. You can then make any changes "
-"required to your system. If you want to proceed with this step choose "
-"'Continue'. You can also choose to mount your file systems read-only instead "
-"of read-write by choosing 'Read-only'. If for some reason this process fails "
-"you can choose 'Skip' and this step will be skipped and you will go directly "
-"to a command shell."
+"<computeroutput>The rescue environment will now attempt to find your Linux "
+"installation and </computeroutput>\n"
+"<computeroutput>mount it under the directory /mnt/sysimage.  You can then "
+"make any changes </computeroutput>\n"
+"<computeroutput>required to your system.  If you want to proceed with this "
+"step choose </computeroutput>\n"
+"<computeroutput>'Continue'. You can also choose to mount your file systems "
+"read-only instead of</computeroutput>\n"
+"<computeroutput>read-write by choosing 'Read-only'.  If for some reason this "
+"process fails you </computeroutput>\n"
+"<computeroutput>can choose 'Skip' and this step will be skipped and you will "
+"go directly to a command shell.</computeroutput>"
 msgstr ""
 
 #. Tag: para
@@ -24497,8 +24925,9 @@ msgstr ""
 #: Rescue_Mode.xml:296
 #, no-c-format
 msgid ""
-"Type <command>/sbin/grub-install /dev/hda</command> to reinstall the GRUB "
-"boot loader, where <command>/dev/hda</command> is the boot partition."
+"Type <command>/sbin/grub-install <replaceable>bootpart</replaceable></"
+"command> to reinstall the GRUB boot loader, where <replaceable>bootpart</"
+"replaceable> is the boot partition (typically, /dev/sda)."
 msgstr ""
 
 #. Tag: para
@@ -24649,32 +25078,38 @@ msgid "Revision History"
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:14
+#: Revision_History.xml:14 Revision_History.xml:39 Revision_History.xml:67
 #, no-c-format
 msgid ""
-"<firstname>Hans</firstname> <surname>De Goede</surname> "
-"<email>hdegoede at redhat.com</email>"
+"<firstname>Ruediger</firstname> <surname>Landmann</surname> <email>r."
+"landmann at redhat.com</email>"
 msgstr ""
 
+#. Tag: member
+#: Revision_History.xml:21
+#, fuzzy, no-c-format
+msgid "Update for F12"
+msgstr "Zaktualizuj swÃ³j system"
+
 #. Tag: author
-#: Revision_History.xml:19 Revision_History.xml:96 Revision_History.xml:111
-#: Revision_History.xml:126
+#: Revision_History.xml:28
 #, no-c-format
 msgid ""
-"<firstname>Paul</firstname> <othername>W.</othername> <surname>Frields</"
-"surname> <email>stickster at gmail.com</email>"
+"<firstname>Hans</firstname> <surname>De Goede</surname> "
+"<email>hdegoede at redhat.com</email>"
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:25 Revision_History.xml:53
+#: Revision_History.xml:33 Revision_History.xml:110 Revision_History.xml:125
+#: Revision_History.xml:140
 #, no-c-format
 msgid ""
-"<firstname>Ruediger</firstname> <surname>Landmann</surname> <email>r."
-"landmann at redhat.com</email>"
+"<firstname>Paul</firstname> <othername>W.</othername> <surname>Frields</"
+"surname> <email>stickster at gmail.com</email>"
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:30
+#: Revision_History.xml:44
 #, no-c-format
 msgid ""
 "<firstname>David</firstname> <surname>Nalley</surname> <email>david."
@@ -24682,13 +25117,13 @@ msgid ""
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:35
+#: Revision_History.xml:49
 #, no-c-format
 msgid "<firstname>The anaconda</firstname> <surname>team</surname>"
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:39
+#: Revision_History.xml:53
 #, no-c-format
 msgid ""
 "<firstname>Red Hat</firstname> <surname>Engineering Content Services</"
@@ -24696,7 +25131,7 @@ msgid ""
 msgstr ""
 
 #. Tag: member
-#: Revision_History.xml:46
+#: Revision_History.xml:60
 #, no-c-format
 msgid ""
 "Major update, incorporating material from the <citetitle>Red Hat Enterprise "
@@ -24705,13 +25140,13 @@ msgid ""
 msgstr ""
 
 #. Tag: member
-#: Revision_History.xml:60
+#: Revision_History.xml:74
 #, no-c-format
 msgid "Convert to build in Publican"
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:67
+#: Revision_History.xml:81
 #, no-c-format
 msgid ""
 "<firstname>Karsten</firstname> <surname>Wade</surname> <email>kwade at redhat."
@@ -24719,13 +25154,13 @@ msgid ""
 msgstr ""
 
 #. Tag: member
-#: Revision_History.xml:74
+#: Revision_History.xml:88
 #, no-c-format
 msgid "Build and publish Fedora 10 version"
 msgstr ""
 
 #. Tag: author
-#: Revision_History.xml:81
+#: Revision_History.xml:95
 #, no-c-format
 msgid ""
 "<firstname>Jared</firstname> <othername>K.</othername> <surname>Smith</"
@@ -24733,25 +25168,25 @@ msgid ""
 msgstr ""
 
 #. Tag: member
-#: Revision_History.xml:89
+#: Revision_History.xml:103
 #, no-c-format
 msgid "Prepare for release of Fedora 10"
 msgstr "Przygotowanie do wydania Fedory 10"
 
 #. Tag: member
-#: Revision_History.xml:104
+#: Revision_History.xml:118
 #, no-c-format
 msgid "Fix incorrect livecd-tools instructions"
 msgstr "Naprawienie niepoprawnych instrukcji livecd-tools"
 
 #. Tag: member
-#: Revision_History.xml:119
+#: Revision_History.xml:133
 #, no-c-format
 msgid "Lots of bug fixes"
 msgstr "Wiele poprawek bÅ‚Ä™dÃ³w"
 
 #. Tag: member
-#: Revision_History.xml:134
+#: Revision_History.xml:148
 #, no-c-format
 msgid "Add information on upgrading a distribution"
 msgstr "Dodanie informacji o aktualizowaniu dystrybucji"
@@ -24796,7 +25231,7 @@ msgid "Alternative Boot Methods"
 msgstr ""
 
 #. Tag: primary
-#: Steps_Cdrom-x86.xml:28 Steps_Cdrom-x86.xml:54
+#: Steps_Cdrom-x86.xml:28 Steps_Cdrom-x86.xml:53
 #, no-c-format
 msgid "<primary>boot methods</primary>"
 msgstr ""
@@ -24814,7 +25249,7 @@ msgid "Boot DVD/CD-ROM"
 msgstr ""
 
 #. Tag: primary
-#: Steps_Cdrom-x86.xml:37 Steps_Cdrom-x86.xml:79
+#: Steps_Cdrom-x86.xml:37 Steps_Cdrom-x86.xml:95
 #, no-c-format
 msgid "<primary>boot CD-ROM</primary>"
 msgstr ""
@@ -24830,31 +25265,31 @@ msgid ""
 msgstr ""
 
 #. Tag: term
-#: Steps_Cdrom-x86.xml:46
+#: Steps_Cdrom-x86.xml:45
 #, no-c-format
 msgid "<term>USB pen drive</term>"
 msgstr ""
 
 #. Tag: primary
-#: Steps_Cdrom-x86.xml:50
+#: Steps_Cdrom-x86.xml:49
 #, no-c-format
 msgid "<primary>USB pen drive</primary>"
 msgstr ""
 
 #. Tag: secondary
-#: Steps_Cdrom-x86.xml:51
+#: Steps_Cdrom-x86.xml:50
 #, no-c-format
 msgid "<secondary>boot methods</secondary>"
 msgstr ""
 
 #. Tag: secondary
-#: Steps_Cdrom-x86.xml:55
+#: Steps_Cdrom-x86.xml:54
 #, no-c-format
 msgid "<secondary>USB pen drive</secondary>"
 msgstr ""
 
 #. Tag: para
-#: Steps_Cdrom-x86.xml:56
+#: Steps_Cdrom-x86.xml:55
 #, no-c-format
 msgid ""
 "If you cannot boot from the DVD/CD-ROM drive, but you can boot using a USB "
@@ -24863,59 +25298,101 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Steps_Cdrom-x86.xml:60
+#: Steps_Cdrom-x86.xml:58
 #, no-c-format
 msgid ""
-"To boot using a USB pen drive, use the <command>dd</command> command to copy "
-"the <filename>diskboot.img</filename> image file from the <filename>/images/"
-"</filename> directory on the DVD or CD-ROM #1. For example:"
+"Your BIOS must support booting from a USB device in order for this boot "
+"method to work."
+msgstr ""
+
+#. Tag: para
+#: Steps_Cdrom-x86.xml:65
+#, no-c-format
+msgid ""
+"Download the <filename>boot.iso</filename> image file as described in <xref "
+"linkend=\"sn-which-files\"/> and use the <application>livecd-iso-to-disk</"
+"application> script to copy it to your USB device:"
 msgstr ""
 
 #. Tag: screen
-#: Steps_Cdrom-x86.xml:63
+#: Steps_Cdrom-x86.xml:69
 #, no-c-format
-msgid "dd if=diskboot.img of=/dev/sda"
+msgid ""
+"livecd-iso-to-disk <replaceable>/path/to/image/file/boot.iso</replaceable> "
+"<replaceable>device</replaceable>"
 msgstr ""
 
 #. Tag: para
-#: Steps_Cdrom-x86.xml:64
+#: Steps_Cdrom-x86.xml:70
 #, no-c-format
 msgid ""
-"Your BIOS must support booting from a USB device in order for this boot "
-"method to work."
+"Where <filename><replaceable>/path/to/image/file</replaceable></filename> is "
+"the location of <filename>boot.iso</filename> and "
+"<filename><replaceable>device</replaceable></filename> is the USB media "
+"device. For example:"
 msgstr ""
 
-#. Tag: title
+#. Tag: screen
 #: Steps_Cdrom-x86.xml:73
 #, no-c-format
-msgid "Making an Installation Boot CD-ROM"
+msgid "livecd-iso-to-disk '/home/username/Downloads/boot.iso' /dev/sdc1"
 msgstr ""
 
-#. Tag: secondary
-#: Steps_Cdrom-x86.xml:76
+#. Tag: para
+#: Steps_Cdrom-x86.xml:74
 #, no-c-format
-msgid "boot CD-ROM, creating"
+msgid ""
+"If you use Red Hat Enterprise Linux or a Linux distribution derived from it, "
+"you can obtain the <package>livecd-tools</package> package from the "
+"<firstterm>Extra Packages for Enterprise Linux</firstterm> (EPEL) "
+"repository. Refer to <ulink url=\"http://fedoraproject.org/wiki/EPEL/"
+"FAQ#howtouse\"></ulink> for details."
 msgstr ""
 
 #. Tag: para
-#: Steps_Cdrom-x86.xml:86
+#: Steps_Cdrom-x86.xml:77
 #, no-c-format
 msgid ""
-"The <filename>images/</filename> directory on the installation DVD contains "
-"the <filename>boot.iso</filename> file. This file is an image of a disc that "
-"you can burn to a CD and use to boot the installation program. To use this "
-"boot CD, your computer must be able to boot from its CD-ROM drive, and its "
-"BIOS settings must be configured to do so."
+"To create bootable USB media from the <filename>boot.iso</filename> file on "
+"a computer that uses Microsoft Windows or a Linux distribution other than "
+"Fedora, Red Hat Enterprise Linux, or those derived from Red Hat Enterprise "
+"Linux, you will need to find a tool that works for your chosen operating "
+"system."
+msgstr ""
+
+#. Tag: para
+#: Steps_Cdrom-x86.xml:80
+#, no-c-format
+msgid ""
+"<application>UNetbootin</application> is a free and open-source graphical "
+"tool that can create live USB media from live image files on computers that "
+"use a wide range of different Linux distributions or Microsoft Windows. The "
+"Fedora Project does not distribute <application>UNetbootin</application> "
+"— it is available from <ulink url=\"http://unetbootin.sourceforge.net/"
+"\"></ulink>. Refer to that website for a complete description of the tool "
+"and instructions on how to use it."
+msgstr ""
+
+#. Tag: title
+#: Steps_Cdrom-x86.xml:89
+#, no-c-format
+msgid "Making an Installation Boot CD-ROM"
+msgstr ""
+
+#. Tag: secondary
+#: Steps_Cdrom-x86.xml:92
+#, no-c-format
+msgid "boot CD-ROM, creating"
 msgstr ""
 
 #. Tag: title
-#: Steps_Cdrom-x86.xml:91
+#: Steps_Cdrom-x86.xml:107
 #, no-c-format
 msgid "Choose an option to burn a CD from an image"
 msgstr ""
 
 #. Tag: para
-#: Steps_Cdrom-x86.xml:92
+#: Steps_Cdrom-x86.xml:108
 #, no-c-format
 msgid ""
 "When you burn the <filename>boot.iso</filename> image, make sure that you "
@@ -25061,6 +25538,20 @@ msgid ""
 "org/release-notes\">http://docs.fedoraproject.org/release-notes</ulink> ."
 msgstr ""
 
+#. Tag: para
+#: Steps_Hardware-x86.xml:23
+#, no-c-format
+msgid ""
+"At the end of a successful Fedora installation process, the installation "
+"program offers you the option to provide details of your hardware "
+"configuration anonymously to the Fedora Project (refer to <xref linkend=\"sn-"
+"smolt\"/>). You can view the statistics gathered by this method at <ulink "
+"url=\"http://smolt.fedoraproject.org/static/stats/devices.html\"></ulink>. "
+"Viewing the list of hardware that makes up systems on which other people "
+"have successfully installed Fedora might help you determine how suitable "
+"your hardware is."
+msgstr ""
+
 #. Tag: title
 #: Steps_Hd_Install-x86.xml:6
 #, no-c-format
@@ -25068,24 +25559,33 @@ msgid "Preparing for a Hard Drive Installation"
 msgstr ""
 
 #. Tag: primary
-#: Steps_Hd_Install-x86.xml:39
+#: Steps_Hd_Install-x86.xml:47
 #, no-c-format
 msgid "installation media"
 msgstr ""
 
 #. Tag: secondary
-#: Steps_Hd_Install-x86.xml:40
+#: Steps_Hd_Install-x86.xml:48
 #, no-c-format
 msgid "testing"
 msgstr ""
 
 #. Tag: command
-#: Steps_Hd_Install-x86.xml:44
+#: Steps_Hd_Install-x86.xml:52
 #, no-c-format
 msgid "linux mediacheck"
 msgstr ""
 
 #. Tag: para
+#: Steps_Hd_Install_x86_ppc_note_1.xml:11
+#, no-c-format
+msgid ""
+"Hard drive installations only work from ext2, ext3, or FAT file systems. If "
+"you have a file system other than those listed here, such as reiserfs, you "
+"will not be able to perform a hard drive installation."
+msgstr ""
+
+#. Tag: para
 #: Steps_Hd_Install_x86_ppc_note_para_1.xml:7
 #, no-c-format
 msgid ""
@@ -25365,7 +25865,7 @@ msgstr ""
 #, no-c-format
 msgid ""
 "<replaceable>/publicly/available/directory</replaceable> <replaceable>client."
-"ip.address</replaceable>(ro,no_root_squash)"
+"ip.address</replaceable>"
 msgstr ""
 
 #. Tag: para
@@ -25376,10 +25876,9 @@ msgstr ""
 
 #. Tag: command
 #: Steps_Network_Install_x86_ppc_s390_section_2.xml:68
-#, no-c-format
-msgid ""
-"<replaceable>/publicly/available/directory</replaceable> *(ro,no_root_squash)"
-msgstr ""
+#, fuzzy, no-c-format
+msgid "<replaceable>/publicly/available/directory</replaceable> *"
+msgstr "file:/urzÄ…dzenie/folder/ks.cfg"
 
 #. Tag: para
 #: Steps_Network_Install_x86_ppc_s390_section_2.xml:73
@@ -26090,14 +26589,6 @@ msgid "From here there are two ways for you to select your time zone:"
 msgstr ""
 
 #. Tag: para
-#: Time_Zone_common-para-3.xml:8
-#, no-c-format
-msgid ""
-"Select <guilabel>System Clock uses UTC</guilabel> if you know that your "
-"system is set to UTC."
-msgstr ""
-
-#. Tag: para
 #: Time_Zone_common-para-4.xml:6
 #, fuzzy, no-c-format
 msgid ""
@@ -26370,12 +26861,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Trouble_After_Booting_Problems_Login-para-1.xml:8
+#: Trouble_After_Booting_Problems_Login-para-1.xml:5
 #, no-c-format
 msgid ""
-"If you did not create a user account in the <application moreinfo=\"none"
-"\">Setup Agent</application>, log in as root and use the password you "
-"assigned to root."
+"If you did not create a user account in the <application>firstboot</"
+"application> screens, switch to a console by pressing "
+"<keycombo><keycap>Ctrl</keycap><keycap>Alt</keycap><keycap>F2</keycap></"
+"keycombo>, log in as root and use the password you assigned to root."
 msgstr ""
 
 #. Tag: para
@@ -26490,9 +26982,8 @@ msgstr ""
 #: Trouble_After_Booting_X_Server_Non_Root.xml:15
 #, no-c-format
 msgid ""
-"If you are having trouble with the X server crashing when anyone other than "
-"root logs in, you may have a full file system (or, a lack of available hard "
-"drive space)."
+"If you are having trouble with the X server crashing when anyone logs in, "
+"you may have a full file system (or, a lack of available hard drive space)."
 msgstr ""
 
 #. Tag: para
@@ -26569,6 +27060,14 @@ msgid ""
 "GNOME, KDE, or both, during the upgrade package selection process."
 msgstr ""
 
+#. Tag: para
+#: Trouble_After_Booting_X_Windows.xml:23
+#, no-c-format
+msgid ""
+"Refer to <xref linkend=\"sn-switching-to-gui-login\"/> for more detail on "
+"installing a desktop environment."
+msgstr ""
+
 #. Tag: title
 #: Trouble_After_common-title-1.xml:8
 #, no-c-format
@@ -26686,6 +27185,14 @@ msgid ""
 msgstr ""
 
 #. Tag: para
+#: Trouble_After_Ram.xml:59
+#, no-c-format
+msgid ""
+"Itanium users must enter boot commands with <command moreinfo=\"none"
+"\">elilo</command> followed by the boot command."
+msgstr ""
+
+#. Tag: para
 #: Trouble_After_Ram.xml:63
 #, no-c-format
 msgid ""
@@ -26750,16 +27257,45 @@ msgid ""
 "in Fedora."
 msgstr ""
 
+#. Tag: tertiary
+#: Trouble_Begin_GUI-indexterm-1.xml:11
+#, fuzzy, no-c-format
+msgid "GUI installation method unavailable"
+msgstr "DostÄ™pne typy instalacji"
+
+#. Tag: tertiary
+#: Trouble_Begin_GUI-indexterm-2.xml:11
+#, no-c-format
+msgid "frame buffer, disabling"
+msgstr ""
+
+#. Tag: para
+#: Trouble_Begin_GUI-note-1.xml:11
+#, no-c-format
+msgid ""
+"To disable frame buffer support and allow the installation program to run in "
+"text mode, try using the <command moreinfo=\"none\">nofb</command> boot "
+"option. This command may be necessary for accessibility with some screen "
+"reading hardware."
+msgstr ""
+
 #. Tag: para
-#: Trouble_Begin_Gui_Install.xml:25
+#: Trouble_Begin_GUI-para-1.xml:8
 #, no-c-format
 msgid ""
-"One possible solution is to try using the <command moreinfo=\"none"
-"\">resolution=</command> boot option. This option may be most helpful for "
-"laptop users. Refer to <xref linkend=\"ch-bootopts\"/> for more information."
+"There are some video cards that have trouble booting into the graphical "
+"installation program. If the installation program does not run using its "
+"default settings, it tries to run in a lower resolution mode. If that still "
+"fails, the installation program attempts to run in text mode."
 msgstr ""
 
 #. Tag: title
+#: Trouble_Begin_GUI-title.xml:8
+#, fuzzy, no-c-format
+msgid "Problems with Booting into the Graphical Installation"
+msgstr "Uruchamianie instalacji"
+
+#. Tag: title
 #: Trouble_Begin_x86_ppc_title-1.xml:8
 #, no-c-format
 msgid "Trouble Beginning the Installation"
@@ -26786,7 +27322,16 @@ msgid "A <filename moreinfo=\"none\">/</filename> (root) partition"
 msgstr ""
 
 #. Tag: para
-#: Trouble_During_common-other-partitioning-listitem-2.xml:9
+#: Trouble_During_common-other-partitioning-listitem-2.xml:6
+#, no-c-format
+msgid ""
+"A <filename>/boot</filename> partition with a file system type that GRUB can "
+"read (for example ext4), if you chose btrfs for <filename>/</filename> "
+"(root)."
+msgstr ""
+
+#. Tag: para
+#: Trouble_During_common-other-partitioning-listitem-3.xml:9
 #, no-c-format
 msgid "A <swap> partition of type swap"
 msgstr ""
@@ -26821,12 +27366,12 @@ msgstr ""
 msgid "Other Partitioning Problems"
 msgstr ""
 
-#. Tag: guilabel
-#: Trouble_During_common-partitions-para-1.xml:9
+#. Tag: para
+#: Trouble_During_common-partitions-para-1.xml:8
 #, no-c-format
 msgid ""
-"The partition table on device hda was unreadable. To create new partitions "
-"it must be initialized, causing the loss of ALL DATA on this drive."
+"Error processing drive sda. Maybe it needs to be reinitialized. YOU WILL "
+"LOSE ALL DATA ON THIS DRIVE!"
 msgstr ""
 
 #. Tag: title
@@ -26957,26 +27502,22 @@ msgid ""
 "computeroutput> error message"
 msgstr ""
 
-#. Tag: para
-#: Trouble_During-x86.xml:23
+#. Tag: title
+#: Trouble_During-x86.xml:54
 #, no-c-format
-msgid ""
-"Check your hardware vendor's website to determine if a driver diskette image "
-"is available that fixes your problem. For more general information on driver "
-"diskettes, refer to <xref linkend=\"ch-driverdisk-x86\"/>."
+msgid "Trouble with Partition Tables"
 msgstr ""
 
 #. Tag: para
-#: Trouble_During-x86.xml:63
+#: Trouble_During-x86.xml:60
 #, no-c-format
 msgid ""
-"If you receive an error after the <guilabel moreinfo=\"none\">Disk "
-"Partitioning Setup</guilabel> (<xref linkend=\"s1-diskpartsetup-x86\"/>) "
-"phase of the installation saying something similar to"
+"If you receive an error at the beginning of the installation process (<xref "
+"linkend=\"sn-initialize-hdd-x86\"/>) that says something similar to:"
 msgstr ""
 
 #. Tag: para
-#: Trouble_During-x86.xml:71
+#: Trouble_During-x86.xml:68
 #, no-c-format
 msgid ""
 "Users who have used programs such as <application moreinfo=\"none\">EZ-BIOS</"
@@ -26986,19 +27527,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: Trouble_During-x86.xml:79
+#: Trouble_During-x86.xml:76
 #, no-c-format
 msgid "Using Remaining Space"
 msgstr ""
 
 #. Tag: tertiary
-#: Trouble_During-x86.xml:83
+#: Trouble_During-x86.xml:80
 #, no-c-format
 msgid "using remaining hard drive space"
 msgstr ""
 
 #. Tag: para
-#: Trouble_During-x86.xml:85
+#: Trouble_During-x86.xml:82
 #, no-c-format
 msgid ""
 "You have a <filename moreinfo=\"none\">swap</filename> and a <filename "
@@ -27008,7 +27549,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Trouble_During-x86.xml:89
+#: Trouble_During-x86.xml:86
 #, no-c-format
 msgid ""
 "If your hard drive is more than 1024 cylinders, you must create a <filename "
@@ -27044,33 +27585,94 @@ msgstr ""
 #: Trouble_During_x86_ppc-section-2-para-1.xml:6
 #, no-c-format
 msgid ""
-"If you receive a traceback error message during installation, you can "
-"usually save it to removeable media, for example a USB flash drive or a "
-"floppy disk."
+"If <application>anaconda</application> encounters an error after the "
+"graphical installation process has started, it will present you with a "
+"screen that contains the following options:"
+msgstr ""
+
+#. Tag: term
+#: Trouble_During_x86_ppc-section-2-para-1.xml:10
+#, no-c-format
+msgid "Debug"
+msgstr ""
+
+#. Tag: para
+#: Trouble_During_x86_ppc-section-2-para-1.xml:12
+#, no-c-format
+msgid "shows you the details of the error."
+msgstr ""
+
+#. Tag: term
+#: Trouble_During_x86_ppc-section-2-para-1.xml:18
+#, no-c-format
+msgid "Save"
+msgstr ""
+
+#. Tag: para
+#: Trouble_During_x86_ppc-section-2-para-1.xml:20
+#, no-c-format
+msgid "saves details of the error locally or remotely"
+msgstr ""
+
+#. Tag: term
+#: Trouble_During_x86_ppc-section-2-para-1.xml:26
+#, no-c-format
+msgid "Quit"
+msgstr ""
+
+#. Tag: para
+#: Trouble_During_x86_ppc-section-2-para-1.xml:28
+#, no-c-format
+msgid "exits the dialog."
 msgstr ""
 
 #. Tag: para
 #: Trouble_During_x86_ppc-section-2-para-2.xml:5
 #, no-c-format
 msgid ""
-"If you do not have removeable media available on your system, you can "
-"<command moreinfo=\"none\">scp</command> the error message to a remote "
-"system."
+"If you select <guimenuitem>Save</guimenuitem> from the main dialog, you can "
+"choose from the following options:"
+msgstr ""
+
+#. Tag: term
+#: Trouble_During_x86_ppc-section-2-para-2.xml:9
+#, no-c-format
+msgid "Save locally"
+msgstr ""
+
+#. Tag: para
+#: Trouble_During_x86_ppc-section-2-para-2.xml:11
+#, no-c-format
+msgid "saves details of the error to the local hard drive."
+msgstr ""
+
+#. Tag: term
+#: Trouble_During_x86_ppc-section-2-para-2.xml:17
+#, no-c-format
+msgid "Save to remote"
 msgstr ""
 
 #. Tag: para
-#: Trouble_During_x86_ppc-section-2-para-3.xml:8
+#: Trouble_During_x86_ppc-section-2-para-2.xml:19
 #, no-c-format
 msgid ""
-"When the traceback dialog appears, the traceback error message is "
-"automatically written to a file named <filename moreinfo=\"none\">/tmp/"
-"anacdump.txt</filename>. Once the dialog appears, switch over to a new tty "
-"(virtual console) by pressing the keys <command moreinfo=\"none\"> <keycombo "
-"moreinfo=\"none\"><keycap moreinfo=\"none\">Ctrl</keycap><keycap moreinfo="
-"\"none\">Alt</keycap><keycap moreinfo=\"none\">F2</keycap> </keycombo> </"
-"command> and <command moreinfo=\"none\">scp</command> the message written to "
-"<filename moreinfo=\"none\">/tmp/anacdump.txt</filename> to a known working "
-"remote system."
+"saves details of the error to a remote location using <application>SCP</"
+"application>."
+msgstr ""
+
+#. Tag: term
+#: Trouble_During_x86_ppc-section-2-para-2.xml:25
+#, no-c-format
+msgid "Save to Bugzilla"
+msgstr ""
+
+#. Tag: para
+#: Trouble_During_x86_ppc-section-2-para-2.xml:27
+#, no-c-format
+msgid ""
+"submits details of the error to Red Hat's bug-tracking system, Bugzilla. You "
+"will need to supply a Bugzilla username and password, and a description of "
+"the bug."
 msgstr ""
 
 #. Tag: title
@@ -27242,13 +27844,18 @@ msgstr ""
 #: Trouble-x86.xml:115
 #, no-c-format
 msgid ""
-"One possible solution is to try using the <command moreinfo=\"none"
-"\">resolution=</command> boot option. This option may be most helpful for "
-"laptop users. Another solution to try is the <command>driver=</command> "
-"option to specify the driver that should be loaded for your video card. If "
-"this works, it should be reported as a bug as the installer has failed to "
-"autodetect your videocard. Refer to <xref linkend=\"ap-admin-options\"/> for "
-"more information on boot options."
+"One possible solution is to use only a basic video driver during "
+"installation. You can do this either by selecting <guilabel>Install system "
+"with basic video driver</guilabel> on the boot menu, or using the <command "
+"moreinfo=\"none\">xdriver=vesa</command> boot option at the boot prompt. "
+"Alternatively, you can force the installer to use a specific screen "
+"resolution with the <command moreinfo=\"none\">resolution=</command> boot "
+"option. This option may be most helpful for laptop users. Another solution "
+"to try is the <command>driver=</command> option to specify the driver that "
+"should be loaded for your video card. If this works, you should report it as "
+"a bug, because the installer failed to detect your video card automatically. "
+"Refer to <xref linkend=\"ap-admin-options\"/> for more information on boot "
+"options."
 msgstr ""
 
 #. Tag: title
@@ -27358,7 +27965,7 @@ msgid "Determining Whether to Upgrade or Re-Install"
 msgstr ""
 
 #. Tag: primary
-#: Upgrade_common-section-1.xml:8 Upgrade_common-section-1.xml:103
+#: Upgrade_common-section-1.xml:8 Upgrade_common-section-1.xml:97
 #, no-c-format
 msgid "<primary>upgrade</primary>"
 msgstr ""
@@ -27386,16 +27993,8 @@ msgid ""
 "performing the upgrade."
 msgstr ""
 
-#. Tag: para
-#: Upgrade_common-section-1.xml:22
-#, no-c-format
-msgid ""
-"It is not possible to upgrade directly from Fedora 9 to Fedora 11. To "
-"upgrade Fedora 9 to Fedora 11, upgrade to Fedora 10 first."
-msgstr ""
-
 #. Tag: emphasis
-#: Upgrade_common-section-1.xml:28
+#: Upgrade_common-section-1.xml:22
 #, no-c-format
 msgid ""
 "This recommended reinstallation method helps to ensure the best system "
@@ -27403,7 +28002,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:35
+#: Upgrade_common-section-1.xml:29
 #, no-c-format
 msgid ""
 "If you currently use Fedora 10, you can perform a traditional, installation "
@@ -27411,7 +28010,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:39
+#: Upgrade_common-section-1.xml:33
 #, no-c-format
 msgid ""
 "However, before you chose to upgrade your system, there are a few things you "
@@ -27419,7 +28018,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:45
+#: Upgrade_common-section-1.xml:39
 #, no-c-format
 msgid ""
 "Individual package configuration files may or may not work after performing "
@@ -27427,7 +28026,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:51
+#: Upgrade_common-section-1.xml:45
 #, no-c-format
 msgid ""
 "If you have one of Red Hat's layered products (such as the Cluster Suite) "
@@ -27436,14 +28035,14 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:57
+#: Upgrade_common-section-1.xml:51
 #, no-c-format
 msgid ""
 "Third party or ISV applications may not work correctly following the upgrade."
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:63
+#: Upgrade_common-section-1.xml:57
 #, no-c-format
 msgid ""
 "Upgrading your system installs updated versions of the packages which are "
@@ -27451,7 +28050,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:67
+#: Upgrade_common-section-1.xml:61
 #, no-c-format
 msgid ""
 "The upgrade process preserves existing configuration files by renaming them "
@@ -27461,7 +28060,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:75
+#: Upgrade_common-section-1.xml:69
 #, no-c-format
 msgid ""
 "As software evolves, configuration file formats can change. It is very "
@@ -27470,7 +28069,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:83
+#: Upgrade_common-section-1.xml:77
 #, no-c-format
 msgid ""
 "It is always a good idea to back up any data that you have on your systems. "
@@ -27480,7 +28079,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:89
+#: Upgrade_common-section-1.xml:83
 #, no-c-format
 msgid ""
 "Some upgraded packages may require the installation of other packages for "
@@ -27491,7 +28090,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: Upgrade_common-section-1.xml:94
+#: Upgrade_common-section-1.xml:88
 #, no-c-format
 msgid ""
 "Depending on how you have partitioned your system, the upgrade program may "
@@ -27502,19 +28101,19 @@ msgid ""
 msgstr ""
 
 #. Tag: primary
-#: Upgrade_common-section-1.xml:99
+#: Upgrade_common-section-1.xml:93
 #, no-c-format
 msgid "swap file"
 msgstr ""
 
 #. Tag: secondary
-#: Upgrade_common-section-1.xml:100
+#: Upgrade_common-section-1.xml:94
 #, no-c-format
 msgid "<secondary>upgrade</secondary>"
 msgstr ""
 
 #. Tag: secondary
-#: Upgrade_common-section-1.xml:104
+#: Upgrade_common-section-1.xml:98
 #, no-c-format
 msgid "adding a swap file"
 msgstr ""
@@ -27580,7 +28179,45 @@ msgid "Upgrading Your Current System"
 msgstr ""
 
 #. Tag: para
-#: Upgrade-x86.xml:30
+#: Upgrade-x86.xml:21
+#, no-c-format
+msgid ""
+"In most cases, the simplest way to upgrade an existing Fedora installation "
+"is with the <application>preupgrade</application> tool. When a new version "
+"of Fedora is available, <application>preupgrade</application> downloads the "
+"packages necessary to upgrade your installation, and initiates the upgrade "
+"process."
+msgstr ""
+
+#. Tag: para
+#: Upgrade-x86.xml:24
+#, no-c-format
+msgid ""
+"Install <application>preupgrade</application> with your graphical package "
+"manager, or type <command>yum install preupgrade</command> at the command "
+"line and press <keycap>Enter</keycap>."
+msgstr ""
+
+#. Tag: para
+#: Upgrade-x86.xml:27
+#, no-c-format
+msgid ""
+"To run <application>preupgrade</application>, type <command>preupgrade</"
+"command> at the command line and press <keycap>Enter</keycap>."
+msgstr ""
+
+#. Tag: para
+#: Upgrade-x86.xml:31
+#, no-c-format
+msgid ""
+"You can also upgrade a Fedora installation by starting the installation "
+"process by any of the methods described in <xref linkend=\"ch-guimode-x86\"/"
+">. If the installer detects a previous Fedora installation on the system, it "
+"will ask you whether you want to upgrade that installation — refer to"
+msgstr ""
+
+#. Tag: para
+#: Upgrade-x86.xml:44
 #, no-c-format
 msgid ""
 "To re-install your system, select <guilabel>Perform a new Fedora "
@@ -27595,7 +28232,16 @@ msgid "Upgrading an Existing System"
 msgstr "Aktualizowanie istniejÄ…cego systemu"
 
 #. Tag: para
-#: upgrading-fedora.xml:11
+#: upgrading-fedora.xml:13
+#, no-c-format
+msgid ""
+"Fedora includes <application>preupgrade</application>, a command-line tool "
+"that allows you to upgrade easily to a new version from within your existing "
+"Fedora installation."
+msgstr ""
+
+#. Tag: para
+#: upgrading-fedora.xml:18
 #, no-c-format
 msgid ""
 "The installation system automatically detects any existing installation of "
@@ -27615,14 +28261,29 @@ msgstr ""
 "aktualizacji pakietÃ³w nie zmienia konfiguracji systemu, ale instaluje "
 "dodatkowy plik konfiguracyjny tak, abyÅ› mÃ³gÅ‚ siÄ™ z nim zapoznaÄ‡ pÃ³Åºniej."
 
+#. Tag: para
+#: upgrading-fedora.xml:29
+#, no-c-format
+msgid ""
+"Note that the installation medium that you are using might not contain all "
+"the software packages that you need to upgrade your computer. In particular, "
+"the Fedora live CD contains a relatively small subset of the packages "
+"available in Fedora. To update packages that are not included on the "
+"installation medium, make sure that you select the <literal>Fedora &PRODVER; "
+"- <replaceable>architecture</replaceable></literal> or the <literal>Fedora "
+"&PRODVER; - <replaceable>architecture</replaceable> - Updates</literal> "
+"repository the during package group selection — refer to <xref linkend="
+"\"sn-additional-repos\"/>."
+msgstr ""
+
 #. Tag: title
-#: upgrading-fedora.xml:23
+#: upgrading-fedora.xml:34
 #, no-c-format
 msgid "Upgrade Examine"
 msgstr "Sprawdzanie moÅ¼liwoÅ›ci aktualizacji"
 
 #. Tag: para
-#: upgrading-fedora.xml:25
+#: upgrading-fedora.xml:36
 #, no-c-format
 msgid ""
 "If your system contains a Fedora or Red Hat Linux installation, a dialog "
@@ -27636,25 +28297,25 @@ msgstr ""
 "<guibutton>Dalej</guibutton>."
 
 #. Tag: title
-#: upgrading-fedora.xml:32
+#: upgrading-fedora.xml:43
 #, no-c-format
 msgid "The upgrade screen"
 msgstr ""
 
 #. Tag: para
-#: upgrading-fedora.xml:35
+#: upgrading-fedora.xml:46
 #, no-c-format
 msgid "The upgrade screen."
 msgstr ""
 
 #. Tag: title
-#: upgrading-fedora.xml:42
+#: upgrading-fedora.xml:53
 #, no-c-format
 msgid "Manually Installed Software"
 msgstr "RÄ™cznie zainstalowane oprogramowanie"
 
 #. Tag: para
-#: upgrading-fedora.xml:43
+#: upgrading-fedora.xml:54
 #, no-c-format
 msgid ""
 "Software you have installed manually on your existing Fedora or Red Hat "
@@ -27668,19 +28329,19 @@ msgstr ""
 "po aktualizacji, aby upewniÄ‡ siÄ™, Å¼e bÄ™dzie dziaÅ‚aÄ‡ poprawnie."
 
 #. Tag: title
-#: upgrading-fedora.xml:53
+#: upgrading-fedora.xml:64
 #, no-c-format
 msgid "Upgrading Using the Installer"
 msgstr "Aktualizowanie uÅ¼ywajÄ…c instalatora"
 
 #. Tag: title
-#: upgrading-fedora.xml:55
+#: upgrading-fedora.xml:66
 #, no-c-format
 msgid "Installations are Recommended"
 msgstr "Instalacja jest zalecana"
 
 #. Tag: para
-#: upgrading-fedora.xml:56
+#: upgrading-fedora.xml:67
 #, fuzzy, no-c-format
 msgid ""
 "In general, the Fedora Project recommends that you keep user data on a "
@@ -27694,7 +28355,7 @@ msgstr ""
 "zobacz <xref linkend=\"ch-disk-partitioning\"/>."
 
 #. Tag: para
-#: upgrading-fedora.xml:62
+#: upgrading-fedora.xml:73
 #, no-c-format
 msgid ""
 "If you choose to upgrade your system using the installation program, any "
@@ -27708,7 +28369,7 @@ msgstr ""
 "ten sposÃ³b, utwÃ³rz listÄ™ obecnych pakietÃ³w w systemie:"
 
 #. Tag: screen
-#: upgrading-fedora.xml:68
+#: upgrading-fedora.xml:79
 #, no-c-format
 msgid ""
 "<command><![CDATA[rpm -qa --qf '%{NAME} %{VERSION}-%{RELEASE} %{ARCH}\\n' > "
@@ -27716,7 +28377,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: upgrading-fedora.xml:70
+#: upgrading-fedora.xml:81
 #, no-c-format
 msgid ""
 "After installation, consult this list to discover which packages you may "
@@ -27727,13 +28388,13 @@ msgstr ""
 "naleÅ¼Ä…cych do Fedory."
 
 #. Tag: para
-#: upgrading-fedora.xml:73
+#: upgrading-fedora.xml:84
 #, no-c-format
 msgid "Next, make a backup of any system configuration data:"
 msgstr "NastÄ™pnie utwÃ³rz kopiÄ™ zapasowÄ… danych konfiguracyjnych systemu:"
 
 #. Tag: screen
-#: upgrading-fedora.xml:75
+#: upgrading-fedora.xml:86
 #, no-c-format
 msgid ""
 "<command><![CDATA[su -c 'tar czf /tmp/etc-`date +%F`.tar.gz /etc'\n"
@@ -27741,7 +28402,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: upgrading-fedora.xml:77
+#: upgrading-fedora.xml:88
 #, no-c-format
 msgid ""
 "Make a complete backup of any important data before performing an upgrade. "
@@ -27759,13 +28420,13 @@ msgstr ""
 "niepoprawnie, istnieje maÅ‚a moÅ¼liwoÅ›Ä‡ utraty danych."
 
 #. Tag: title
-#: upgrading-fedora.xml:85
+#: upgrading-fedora.xml:96
 #, no-c-format
 msgid "Storing Backups"
 msgstr "Przechowywanie kopii zapasowych"
 
 #. Tag: para
-#: upgrading-fedora.xml:86
+#: upgrading-fedora.xml:97
 #, no-c-format
 msgid ""
 "Note that the above examples store backup materials in a <filename class="
@@ -27782,7 +28443,7 @@ msgstr ""
 "lub zewnÄ™trzny dysk twardy."
 
 #. Tag: para
-#: upgrading-fedora.xml:93
+#: upgrading-fedora.xml:104
 #, no-c-format
 msgid ""
 "For more information on completing the upgrade process later, refer to <xref "
@@ -27792,19 +28453,19 @@ msgstr ""
 "linkend=\"sn-finishing-upgrade\"/>."
 
 #. Tag: title
-#: upgrading-fedora.xml:98
+#: upgrading-fedora.xml:109
 #, no-c-format
 msgid "Upgrading Boot Loader Configuration"
 msgstr "Aktualizowanie konfiguracji programu startowego"
 
 #. Tag: secondary
-#: upgrading-fedora.xml:103
+#: upgrading-fedora.xml:114
 #, no-c-format
 msgid "upgrading"
 msgstr ""
 
 #. Tag: para
-#: upgrading-fedora.xml:104
+#: upgrading-fedora.xml:115
 #, fuzzy, no-c-format
 msgid ""
 "Your completed Fedora installation must be registered in the <indexterm> "
@@ -27823,7 +28484,7 @@ msgstr ""
 "linkend=\"ch-bootloader\"/>."
 
 #. Tag: para
-#: upgrading-fedora.xml:113
+#: upgrading-fedora.xml:124
 #, no-c-format
 msgid ""
 "If the existing boot loader was installed by a Linux distribution, the "
@@ -27839,7 +28500,7 @@ msgstr ""
 "przy aktualizacji istniejÄ…cej instalacji Fedory lub Red Hat Linuksa."
 
 #. Tag: para
-#: upgrading-fedora.xml:121
+#: upgrading-fedora.xml:132
 #, no-c-format
 msgid ""
 "<firstterm>GRUB</firstterm> is the standard boot loader for Fedora. If your "
@@ -27859,7 +28520,7 @@ msgstr ""
 "instalacji przeczytaj dokumentacjÄ™ produktu, aby uzyskaÄ‡ pomoc technicznÄ…."
 
 #. Tag: para
-#: upgrading-fedora.xml:132
+#: upgrading-fedora.xml:143
 #, no-c-format
 msgid ""
 "Install a new boot loader as part of an upgrade process only if you are "
@@ -27877,7 +28538,7 @@ msgstr ""
 "programu startowego</guilabel>, aby usunÄ…Ä‡ istniejÄ…cy i zainstalowaÄ‡ GRUB-a."
 
 #. Tag: para
-#: upgrading-fedora.xml:142
+#: upgrading-fedora.xml:153
 #, no-c-format
 msgid ""
 "After you make your selection, click <guibutton>Next</guibutton> to continue."
@@ -28258,8 +28919,8 @@ msgstr ""
 #: vnc_References_Chapter.xml:16
 #, no-c-format
 msgid ""
-"TightVNC: <ulink url=\"http://www.tightvnc.com/\">http://www.tightvnc.com/</"
-"ulink>"
+"TigerVNC: <ulink url=\"http://http://tigervnc.sourceforge.net/\">http://"
+"tigervnc.sourceforge.net/</ulink>"
 msgstr ""
 
 #. Tag: para
@@ -28326,19 +28987,20 @@ msgstr ""
 #: vnc_Viewer_Chapter.xml:34
 #, no-c-format
 msgid ""
-"<command>vncviewer</command> is available on <application>Red Hat Enterprise "
-"Linux</application> and <application>Fedora Linux</application> by "
-"installing the <filename>vnc</filename> package:"
+"VNC clients are available in the repositories of most Linux distributions. "
+"Use your package manager to search for a client for your chosen "
+"distribution. For example, on Fedora, install the <package>tigervnc</"
+"package> package:"
 msgstr ""
 
 #. Tag: screen
-#: vnc_Viewer_Chapter.xml:43
+#: vnc_Viewer_Chapter.xml:38
 #, no-c-format
-msgid "# <userinput>yum install vnc</userinput>"
+msgid "# <userinput>yum install tigervnc</userinput><!-- RHEL vnc -->"
 msgstr ""
 
 #. Tag: para
-#: vnc_Viewer_Chapter.xml:47
+#: vnc_Viewer_Chapter.xml:42
 #, no-c-format
 msgid ""
 "TightVNC is available for Windows at <ulink url=\"http://www.tightvnc.com/"
@@ -28346,7 +29008,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: vnc_Viewer_Chapter.xml:53
+#: vnc_Viewer_Chapter.xml:48
 #, no-c-format
 msgid ""
 "MacOS X includes built-in VNC support as of version 10.5. In the "
@@ -28359,7 +29021,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: vnc_Viewer_Chapter.xml:70
+#: vnc_Viewer_Chapter.xml:65
 #, no-c-format
 msgid ""
 "Once you have verified you have a VNC viewer available, it's time to start "
@@ -28372,6 +29034,70 @@ msgstr ""
 msgid "Installing Through VNC"
 msgstr ""
 
+#. Tag: para
+#: vnc_VNC_Whitepaper.xml:9
+#, no-c-format
+msgid ""
+"The Red Hat Enterprise Linux and Fedora installer (<application>anaconda</"
+"application>) offers you two interactive modes of operation. The original "
+"mode is a text-based interface. The newer mode uses GTK+ and runs in the X "
+"Window environment. This chapter explains how you can use the graphical "
+"installation mode in environments where the system lacks a proper display "
+"and input devices typically associated with a workstation. This scenario is "
+"typical of systems in datacenters, which are often installed in a rack "
+"environment and do not have a display, keyboard, or mouse. Additionally, a "
+"lot of these systems even lack the ability to connect a graphical display. "
+"Given that enterprise hardware rarely needs that ability at the physical "
+"system, this hardware configuration is acceptable."
+msgstr ""
+
+#. Tag: para
+#: vnc_VNC_Whitepaper.xml:26
+#, no-c-format
+msgid ""
+"Even in these environments, however, the graphical installer remains the "
+"recommended method of installation. The text mode environment lacks a lot of "
+"capabilities found in the graphical mode. Many users still feel that the "
+"text mode interface provides them with additional power or configuration "
+"ability not found in the graphical version. The opposite is true. Much less "
+"development effort is put in to the text-mode environment and specific "
+"things (for example, LVM configuration, partition layout, package selection, "
+"and bootloader configuration) are deliberately left out of the text mode "
+"environment. The reasons for this are:"
+msgstr ""
+
+#. Tag: para
+#: vnc_VNC_Whitepaper.xml:42
+#, no-c-format
+msgid ""
+"Less screen real estate for creating user interfaces similar to those found "
+"in the graphical mode."
+msgstr ""
+
+#. Tag: para
+#: vnc_VNC_Whitepaper.xml:49
+#, no-c-format
+msgid "Difficult internationalization support."
+msgstr ""
+
+#. Tag: para
+#: vnc_VNC_Whitepaper.xml:54
+#, no-c-format
+msgid "Desire to maintain a single interactive installation code path."
+msgstr ""
+
+#. Tag: para
+#: vnc_VNC_Whitepaper.xml:61
+#, no-c-format
+msgid ""
+"<application>Anaconda</application> therefore includes a "
+"<application>Virtual Network Computing</application> (VNC) mode that allows "
+"the graphical mode of the installer to run locally, but display on a system "
+"connected to the network. Installing in VNC mode provides you with the full "
+"range of installation options, even in situations where the system lacks a "
+"display or input devices."
+msgstr ""
+
 #. Tag: title
 #: Welcome-x86.xml:6
 #, no-c-format
@@ -28397,6 +29123,86 @@ msgstr ""
 msgid "Click on the <guibutton>Next</guibutton> button to continue."
 msgstr ""
 
+#. Tag: title
+#: Write_changes_to_disk.xml:6
+#, no-c-format
+msgid "Write changes to disk"
+msgstr ""
+
+#. Tag: para
+#: Write_changes_to_disk.xml:7
+#, no-c-format
+msgid ""
+"The installer prompts you to confirm the partitioning options that you "
+"selected. Click <guibutton>Write changes to disk</guibutton> to allow the "
+"installer to partition your hard drive and install Fedora."
+msgstr ""
+
+#. Tag: title
+#: Write_changes_to_disk.xml:10
+#, fuzzy, no-c-format
+msgid "Writing storage configuration to disk"
+msgstr "Aktualizowanie konfiguracji programu startowego"
+
+#. Tag: para
+#: Write_changes_to_disk.xml:13
+#, no-c-format
+msgid ""
+"The <guilabel>Writing storage configuration to disk</guilabel> dialog box "
+"lets you choose to <guibutton>Write changes to disk</guibutton> or to "
+"<guibutton>Go back</guibutton>."
+msgstr ""
+
+#. Tag: para
+#: Write_changes_to_disk.xml:19
+#, fuzzy, no-c-format
+msgid ""
+"If you are certain that you want to proceed, click <guibutton>Write changes "
+"to disk</guibutton>."
+msgstr ""
+"Aby kontynuowaÄ‡, wybierz <guilabel>ZrozumiaÅ‚em, kontynuuj</guilabel>, a "
+"potem <guibutton>Dalej</guibutton>."
+
+#. Tag: title
+#: Write_changes_to_disk.xml:23
+#, no-c-format
+msgid "Last chance to cancel safely"
+msgstr ""
+
+#. Tag: para
+#: Write_changes_to_disk.xml:24
+#, no-c-format
+msgid ""
+"Up to this point in the installation process, the installer has made no "
+"lasting changes to your computer. When you click <guibutton>Write changes to "
+"disk</guibutton>, the installer will allocate space on your hard drive and "
+"start to transfer Fedora into this space. Depending on the partitioning "
+"option that you chose, this process might include erasing data that already "
+"exists on your computer."
+msgstr ""
+
+#. Tag: para
+#: Write_changes_to_disk.xml:27
+#, no-c-format
+msgid ""
+"To revise any of the choices that you made up to this point, click "
+"<guibutton>Go back</guibutton>. To cancel installation completely, switch "
+"off your computer. To switch off most computers at this stage, press the "
+"power button and hold it down for a few seconds."
+msgstr ""
+
+#. Tag: para
+#: Write_changes_to_disk.xml:30
+#, no-c-format
+msgid ""
+"After you click <guibutton>Write changes to disk</guibutton>, allow the "
+"installation process to complete. If the process is interrupted (for "
+"example, by you switching off or resetting the computer, or by a power "
+"outage) you will probably not be able to use your computer until you restart "
+"and complete the Fedora installation process, or install a different "
+"operating system."
+msgstr ""
+
 #. Tag: para
 #: X86_Bios_Tip.xml:9
 #, no-c-format
@@ -28434,7 +29240,7 @@ msgstr ""
 
 #. Tag: primary
 #: X86_Bootloader.xml:8 X86_Bootloader.xml:11 X86_Bootloader.xml:26
-#: X86_Bootloader.xml:200 X86_Bootloader.xml:255 X86_Bootloader.xml:275
+#: X86_Bootloader.xml:200 X86_Bootloader.xml:262 X86_Bootloader.xml:282
 #, no-c-format
 msgid "<primary>boot loader</primary>"
 msgstr ""
@@ -28756,8 +29562,25 @@ msgid ""
 "window to read the manual pages."
 msgstr ""
 
+#. Tag: title
+#: X86_Bootloader.xml:245
+#, no-c-format
+msgid "GRUB recognizes only the QWERTY keyboard layout"
+msgstr ""
+
 #. Tag: para
-#: X86_Bootloader.xml:244
+#: X86_Bootloader.xml:246
+#, no-c-format
+msgid ""
+"When selecting a GRUB password, be aware that GRUB recognizes only the "
+"QWERTY keyboard layout, regardless of the keyboard actually attached to the "
+"system. If you use a keyboard with a significantly different layout, it "
+"might be more effective to memorize a pattern of keystrokes rather than the "
+"word that the pattern produces."
+msgstr ""
+
+#. Tag: para
+#: X86_Bootloader.xml:251
 #, no-c-format
 msgid ""
 "To configure more advanced boot loader options, such as changing the drive "
@@ -28767,13 +29590,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: X86_Bootloader.xml:249
+#: X86_Bootloader.xml:256
 #, no-c-format
 msgid "Advanced Boot Loader Configuration"
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:251
+#: X86_Bootloader.xml:258
 #, no-c-format
 msgid ""
 "Now that you have chosen which boot loader to install, you can also "
@@ -28782,25 +29605,25 @@ msgid ""
 msgstr ""
 
 #. Tag: secondary
-#: X86_Bootloader.xml:256
+#: X86_Bootloader.xml:263
 #, no-c-format
 msgid "<secondary>MBR</secondary>"
 msgstr ""
 
 #. Tag: secondary
-#: X86_Bootloader.xml:260
+#: X86_Bootloader.xml:267
 #, no-c-format
 msgid "installing boot loader on"
 msgstr ""
 
 #. Tag: primary
-#: X86_Bootloader.xml:263
+#: X86_Bootloader.xml:270
 #, no-c-format
 msgid "OS/2 boot manager"
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:267
+#: X86_Bootloader.xml:274
 #, no-c-format
 msgid ""
 "The master boot record (MBR) — This is the recommended place to "
@@ -28814,13 +29637,13 @@ msgid ""
 msgstr ""
 
 #. Tag: secondary
-#: X86_Bootloader.xml:276
+#: X86_Bootloader.xml:283
 #, no-c-format
 msgid "installing on boot partition"
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:277
+#: X86_Bootloader.xml:284
 #, no-c-format
 msgid ""
 "The first sector of your boot partition — This is recommended if you "
@@ -28830,13 +29653,13 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: X86_Bootloader.xml:282
+#: X86_Bootloader.xml:289
 #, no-c-format
 msgid "GRUB as a Secondary Boot Loader"
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:283
+#: X86_Bootloader.xml:290
 #, no-c-format
 msgid ""
 "If you install GRUB as a secondary boot loader, you must reconfigure your "
@@ -28847,19 +29670,19 @@ msgid ""
 msgstr ""
 
 #. Tag: title
-#: X86_Bootloader.xml:296
+#: X86_Bootloader.xml:303
 #, no-c-format
 msgid "Boot Loader Installation"
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:299
+#: X86_Bootloader.xml:306
 #, no-c-format
 msgid "Choose where to install a boot loader and how to configure it."
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:306
+#: X86_Bootloader.xml:313
 #, no-c-format
 msgid ""
 "If you have a RAID card, be aware that some BIOSes do not support booting "
@@ -28870,13 +29693,13 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:310
+#: X86_Bootloader.xml:317
 #, no-c-format
 msgid "If your system only uses Fedora, you should choose the MBR."
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:314
+#: X86_Bootloader.xml:321
 #, no-c-format
 msgid ""
 "Click the <guibutton>Change Drive Order</guibutton> button if you would like "
@@ -28887,7 +29710,7 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:332
+#: X86_Bootloader.xml:339
 #, no-c-format
 msgid ""
 "Rescue mode provides the ability to boot a small Fedora environment entirely "
@@ -28900,28 +29723,30 @@ msgid ""
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:338
+#: X86_Bootloader.xml:345
 #, no-c-format
 msgid ""
-"Using the CD-ROM to boot an x86, AMD64, or <trademark class=\"registered"
-"\">Intel</trademark> 64 system, type <userinput>linux rescue</userinput> at "
-"the installation boot prompt."
+"Boot an x86, AMD64, or <trademark class=\"registered\">Intel</trademark> 64 "
+"system from any installation medium, such as CD, DVD, USB, or PXE, and type "
+"<userinput>linux rescue</userinput> at the installation boot prompt. Refer "
+"to <xref linkend=\"ap-rescuemode\"/> for a more complete description of "
+"rescue mode."
 msgstr ""
 
 #. Tag: title
-#: X86_Bootloader.xml:350
+#: X86_Bootloader.xml:357
 #, no-c-format
 msgid "Alternative Boot Loaders"
 msgstr ""
 
 #. Tag: secondary
-#: X86_Bootloader.xml:357
+#: X86_Bootloader.xml:364
 #, no-c-format
 msgid "alternatives to"
 msgstr ""
 
 #. Tag: para
-#: X86_Bootloader.xml:360
+#: X86_Bootloader.xml:367
 #, no-c-format
 msgid ""
 "<application>GRUB</application> is the default bootloader for Fedora, but is "



