Problema quemando ISO

Sun Jun 19 15:09:53 UTC 2005

Hola!

Ya he descargado las 4 imagenes ISO de Fedora Core 4 (FC4) y ahora estoy
tratando de quemarlas, pero me esta dando un error que no se como
correguir (al final, cuando esta finalizando 'fixating'). Agradezco
cualquier ayuda :-D

1) Todas las imagenes fueron comprobadas por SHA1SUM exitosamente!

2) Hardware: Compaq Presario 2701US - P3 at 1Ghz - 512MB RAM - 30GB DD -
Unidad CD-RW Matshita UJDA330 8x [1]
   (CD-RW genericos 700MB 4x)

3) Software: Fedora Core 3 - Kernel 2.6.11-1.14 - X-CD-Roast 0.98alpha15

4) Mensaje de error:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "/dev/cdrom1"
gracetime=2 fs=16384k  -v -useinfo speed=8 -eject -pad -data
"/home/josue/FC4-i386-disc3.iso" ...

cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
cdrecord: WARNING: This causes a high risk for buffer underruns.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/cdrom1'
devname: '/dev/cdrom1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
cdrecord: Warning: using inofficial libscg transport code version
(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83
04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to
http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'MATSHITA'
Identifikation : 'UJDA330         '
Revision       : '1.51'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A
Profile: 0x000A (current)
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size      : 16777216 = 16384 KB
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
pregap1: -1
Track 01: data   637 MB         padsize:   30 KB
Total size:      732 MB (72:35.40) = 326655 sectors
Lout start:      733 MB (72:37/30) = 326655 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in:  -11615 (97:27/10)
ATIP start of lead out: 335925 (74:41/00)
1T speed low:  0 (reserved val  0) 1T speed high:  4
power mult factor: 4 5
recommended erase/write power: 3
A1 values: 02 4A B0
A2 values: 00 00 00
Disk type:    Phase change
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 335925 Blocks current: 335925 Blocks remaining: 9270
Speed set to 706 KB/s
Starting to write CD/DVD at speed   4.0 in real TAO mode for single
session.
Waiting for reader process to fill input buffer ...
input buffer ready.
trackno=0
Performing OPC...
Starting new track at sector: 0
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 F6 10 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 03 00 00 F3 5C 0C 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 62300 (valid) 
resid: 63488
cmd finished after 0.044s timeout 40s
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.

cdrecord: Success. flush cache: scsi sendcmd: no error
write track data: error after 129007616 bytes
CDB:  35 00 00 00 00 00 00 00 00 00
Trouble flushing the cache
status: 0x2 (CHECK CONDITION)
Writing  time:  223.577s
Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 0C 00 00 00
Average write speed  19.9x.
Sense Key: 0x3 Medium Error, Segment 0
Min drive buffer fill was 100%
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Fixating...
Sense flags: Blk 0 (not valid) 
cmd finished after 5.275s timeout 120s
Fixating time:   81.109s
cdrecord: fifo had 2287 puts and 2033 gets.
cdrecord: fifo was 0 times empty and 1994 times full, min fill was 96%.

Cualquier sugerencia sera considerada ;-)

Saludos,
--
Efraim MARQUEZ-ARREAZA
http://www.fedora.org.ve
Usuario Linux: 142.883
Fedora Core 4  ***QUEMANDO***
Mobile: +58 (416) 3669366
Maracaibo, Venezuela

[1] http://h10025.www1.hp.com/ewfrf/wc/document?
dlc=en&tool=prodinfoCategory&lc=en&product=95486&dest_page=prodinfoCategory&cc=us&docname=c00009289