Problema quemando ISO

Sun Jun 19 17:25:44 UTC 2005

Efraim MARQUEZ-ARREAZA wrote:

>Hola!
>
>Ya he descargado las 4 imagenes ISO de Fedora Core 4 (FC4) y ahora estoy
>tratando de quemarlas, pero me esta dando un error que no se como
>correguir (al final, cuando esta finalizando 'fixating'). Agradezco
>cualquier ayuda :-D
>
>1) Todas las imagenes fueron comprobadas por SHA1SUM exitosamente!
>
>2) Hardware: Compaq Presario 2701US - P3 at 1Ghz - 512MB RAM - 30GB DD -
>Unidad CD-RW Matshita UJDA330 8x [1]
>   (CD-RW genericos 700MB 4x)
>
>3) Software: Fedora Core 3 - Kernel 2.6.11-1.14 - X-CD-Roast 0.98alpha15
>
>4) Mensaje de error:
>Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "/dev/cdrom1"
>gracetime=2 fs=16384k  -v -useinfo speed=8 -eject -pad -data
>"/home/josue/FC4-i386-disc3.iso" ...
>
>cdrecord: No write mode specified.
>cdrecord: Asuming -tao mode.
>cdrecord: Future versions of cdrecord may have different drive dependent
>defaults.
>cdrecord: Continuing in 5 seconds...
>cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
>cdrecord: WARNING: This causes a high risk for buffer underruns.
>cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
>cdrecord: Permission denied. WARNING: Cannot set priority using
>setpriority().
>cdrecord: WARNING: This causes a high risk for buffer underruns.
>scsidev: '/dev/cdrom1'
>devname: '/dev/cdrom1'
>scsibus: -2 target: -2 lun: -2
>Linux sg driver version: 3.5.27
>cdrecord: Warning: using inofficial libscg transport code version
>(schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83
>04/05/20 Copyright 1997 J. Schilling').
>SCSI buffer size: 64512
>Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
>Schilling
>Note: This version is an unofficial (modified) version with DVD support
>Note: and therefore may have bugs that are not present in the original.
>Note: Please send bug reports or support requests to
>http://bugzilla.redhat.com/bugzilla
>Note: The author of cdrecord should not be bothered with problems in
>this version.
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>atapi: 1
>Device type    : Removable CD-ROM
>Version        : 0
>Response Format: 1
>Vendor_info    : 'MATSHITA'
>Identifikation : 'UJDA330         '
>Revision       : '1.51'
>Device seems to be: Generic mmc CD-RW.
>Current: 0x000A
>Profile: 0x000A (current)
>Profile: 0x0009
>Profile: 0x0008
>Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
>Driver flags   : MMC-2 SWABAUDIO
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R
>Drive buf size : 1359872 = 1328 KB
>FIFO size      : 16777216 = 16384 KB
>cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
>cdrecord: Permission denied. WARNING: Cannot set priority using
>setpriority().
>cdrecord: WARNING: This causes a high risk for buffer underruns.
>pregap1: -1
>Track 01: data   637 MB         padsize:   30 KB
>Total size:      732 MB (72:35.40) = 326655 sectors
>Lout start:      733 MB (72:37/30) = 326655 sectors
>Current Secsize: 2048
>ATIP info from disk:
>Indicated writing power: 5
>Reference speed: 2
>Is not unrestricted
>Is erasable
>ATIP start of lead in:  -11615 (97:27/10)
>ATIP start of lead out: 335925 (74:41/00)
>1T speed low:  0 (reserved val  0) 1T speed high:  4
>power mult factor: 4 5
>recommended erase/write power: 3
>A1 values: 02 4A B0
>A2 values: 00 00 00
>Disk type:    Phase change
>Manuf. index: 18
>Manufacturer: Plasmon Data systems Ltd.
>Blocks total: 335925 Blocks current: 335925 Blocks remaining: 9270
>Speed set to 706 KB/s
>Starting to write CD/DVD at speed   4.0 in real TAO mode for single
>session.
>Waiting for reader process to fill input buffer ...
>input buffer ready.
>trackno=0
>Performing OPC...
>Starting new track at sector: 0
>cdrecord: Success. write_g1: scsi sendcmd: no error
>CDB:  2A 00 00 00 F6 10 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: F0 00 03 00 00 F3 5C 0C 00 00 00 00 0C 00 00 00
>Sense Key: 0x3 Medium Error, Segment 0
>Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>Sense flags: Blk 62300 (valid) 
>resid: 63488
>cmd finished after 0.044s timeout 40s
>cdrecord: A write error occured.
>cdrecord: Please properly read the error message above.
>
>cdrecord: Success. flush cache: scsi sendcmd: no error
>write track data: error after 129007616 bytes
>CDB:  35 00 00 00 00 00 00 00 00 00
>Trouble flushing the cache
>status: 0x2 (CHECK CONDITION)
>Writing  time:  223.577s
>Sense Bytes: 70 00 03 00 00 00 00 0C 00 00 00 00 0C 00 00 00
>Average write speed  19.9x.
>Sense Key: 0x3 Medium Error, Segment 0
>Min drive buffer fill was 100%
>Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
>Fixating...
>Sense flags: Blk 0 (not valid) 
>cmd finished after 5.275s timeout 120s
>Fixating time:   81.109s
>cdrecord: fifo had 2287 puts and 2033 gets.
>cdrecord: fifo was 0 times empty and 1994 times full, min fill was 96%.
>
>Cualquier sugerencia sera considerada ;-)
>
>Saludos,
>--
>Efraim MARQUEZ-ARREAZA
>http://www.fedora.org.ve
>Usuario Linux: 142.883
>Fedora Core 4  ***QUEMANDO***
>Mobile: +58 (416) 3669366
>Maracaibo, Venezuela
>
>[1] http://h10025.www1.hp.com/ewfrf/wc/document?
>dlc=en&tool=prodinfoCategory&lc=en&product=95486&dest_page=prodinfoCategory&cc=us&docname=c00009289
>
>
>--
>Fedora-es-list mailing list
>Fedora-es-list at redhat.com
>To unsubscribe: 
>http://www.redhat.com/mailman/listinfo/fedora-es-list
>
>  
>
Aunque por defecto no se instala, trata de quemar las imágenes con 
cdrdao en lugar de cdrecord y desde línea de comandos. A mi el cdrecord 
siempre me saca canas verdes y me da dolores de cabeza, en cambio, 
cdrdao nunca me ha defraudado. Otra alternativa es utilizar k3b (pero 
supongo que no tienes nada referente a KDE en tu máquina). Qumar ISOs 
con cdrdao no es tan complicado, te recomiendo que revises este "HowTo" 
en los forums de Gentoo:

http://gentoo-wiki.com/HOWTO_CD_Burning_for_Dummies