[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: Cups crap



Just a little more Info:

I've had some time this afternoon, so I set up the printer in a number of different ways:  SMB, JetDirect and IPP, all produced the same result, blank paper coming from the printer.  I don't know if this information might point someone in a direction that will help me troubleshoot this or not, but there it is.

Jim Powell
L3 Communications GSI
Senior Scientist/Engineer
AV-8B Weapons Integration
james f powell navy mil <mailto:james f powell navy mil>
(760)939-9089


> -----Original Message-----
> From: fedora-list-bounces redhat com
> [mailto:fedora-list-bounces redhat com]On Behalf Of Powell, 
> James F CONT
> Sent: Thursday, June 10, 2004 14:29
> To: For users of Fedora Core releases
> Subject: RE: Cups crap
> 
> 
> > At 11:42 6/10/2004, Powell, James F CONT wrote:
> > >OK, I have 2 networked printers in this office, both HP Color 
> > >LaserJets.  One is a 4500 and one is a 4550.  I'm using both 
> > of them via 
> > >JetDirect (which worked in FC1 without any modifications).  
> > They both are 
> > >maxed out in memory and have duplex units.  Upon upgrading 
> > to FC2, both 
> > >still are accessed, but only blank sheets of paper come out 
> > regardless of 
> > >what type of document I send to them.
> > 
> > Is the JetDirect card internal? Or is it an external 
> > printserver? 
> 
> It is an internal card in the printers.
> 
> > Which URL 
> > or address are you using to print to the printers? 
> 
> I'm using the physical IP address of each of them, in this 
> case Cubicle has an IP of 129.131.45.12.
> 
> > Does CUPS actually claim 
> > to support them? If so, with which drivers or methods? 
> 
> When you go through the printer setup, there are Drivers 
> listed for both of the printers in the setup, so I hope that 
> CUPS supports them.  I included the 4550 in this message, as 
> it is the only one included in the machine I can get to from 
> this machine.
> 
> > Can you post the 
> > relevant sections of the config files? 
> 
> <Location /printers/Cubicle>
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> AuthType None
> </Location>
> <Location />
> Order Deny,Allow
> Deny From All
> Allow From 127.0.0.1
> </Location>
> Browsing On
> BrowseProtocols cups
> BrowseOrder Deny,Allow
> BrowseAllow from @LOCAL
> Listen 127.0.0.1:631
> 
> > Are there any errors in the logs?
> 
> Nope, CUPS seems to think it did it's job, and at least paper 
> came out.
>  
> > Can you print to those networked printers from an FC1 box? 
> 
> Yes, no problems except it is only black and white (no 
> color), which I can deal with, I rarely need color anyway.
> 
> > Are there *any* 
> > visible differences in the configurations between FC1 and FC2?
> 
> Nothing that is obvious.
> 
> > 
> > DETAILS!!! <grin> It is impossible to troubleshoot anything 
> > without lots of details. 
> 
> Sorry, I should know not to do this type of thing while I'm 
> working on the aircraft, not enough time to really think 
> about what you need.
> 
> Jim Powell
> L3 Communications GSI
> Senior Scientist/Engineer
> AV-8B Weapons Integration
> james f powell navy mil <mailto:james f powell navy mil>
> (760)939-9089
> 
> 
> -- 
> fedora-list mailing list
> fedora-list redhat com
> To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list
> 



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]