[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [FC2] - AVM Fritz card not recognized

Alexander Dalloz wrote/ha scritto, On/il 23/06/2004 20:18:

Am Mi, den 23.06.2004 schrieb antonio montagnani um 6:32:

and this is the output of my lspci command:
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02)
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:11.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:12.0 Multimedia video controller: 3Dfx Interactive, Inc. Voodoo 2 (rev 02)
01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)

Antonio Montagnani


as Christoph already said, there is no ISDN card recognized by your
system - on the very base, not on a high level with driver support! So
it does not matter what you put then in there in any configuration file,
it will not work.

I would first suggest you first find out and say whether this is an ISA
card or a PCI card - that too Christoph asked. If it is an ISA card it
would explain why it is not listed by lspci (-> ls_pci_). The setup
would then differ. Actually I don't know how and if ISA cards work with
FC2. I remember a bugzilla article where someone from @redhat.com (Dave
Jones?) said, that ISA cards are now unsupported for quite a long time.
Probably that means the need to compile a custom 2.6 kernel with ISA
support. Would be nice to know as I own an old Fritz!Classic ISA
(running on RH9 flawless for voice box and fax).

If your card is ISA it is important that you check your motherboard BIOS
and make sure you assign a specific IRQ for that card so that this one
is not used by any other thing in your machine. It is too very important
that you set "PnP OS NO". That is important too if your card is PCI. In
that case you will not have to reserve an IRQ for the card as it is able
to share the IRQ. But better to give it his own. Not in the BIOS but by
carefully selecting a good PCI slot. It's worth to change the current
PCI slot and try a different one. At that time check that the card is
correct plugged in!


Alexander and Christopher,

it is late now so I can't check your suggestions but:

1) the card is PCI Fritcard PnP
2) the card was working in FC1 as eth2 (and before in RH9 and RH8,) that is a week ago, so I would exclude any hardware failure!!!!

The file isdncard is equivalent to Christopher's, but I can't understand why I have this file (unless it does take in account that FC2 is un upgrade from FC1....)

Tnx to everybody


Antonio Montagnani

Working with  Mozilla 1.6 on Redhat Linux Fedora Core 2
    Uso Mozilla 1.6 su Redhat Linux Fedora Core 2

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]