[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: HP 5370C Scanner How to config?



Paul Howarth wrote:

Bob Goodwin wrote:

Paul Howarth wrote:



Looks like I've been barking up the wrong tree. It seems that USB scanner support doesn't use udev at all.


According to http://www.exactcode.de/oss/avision/index.html the "avision" backend should provide at least limited functionality for your scanner. See "man sane-avision" for details (you'll need to have the sane-backends package installed).

P.S. Please don't post HTML to this mailing list.

Paul.

I am using Thunderbird 1.0.2 and it is set to send plain text
to domain redhat.com, should never send html? It usually asks
me to ok sending html. However I have recently been afflicted
with a severe vision problem and may have hit the wrong button.
That's the reason for the scanner, I need to enlarge printed
pages to read text!

I found the following data in /var/log/dmesg, still can't get xsane
to recognize the scanner, no device?

I tried creating /dev/sg0 and making an entry in fstab but to no avail there ...


USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 9 for device 0000:00:07.2 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: irq 9, io base 0x10c0 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. usb 1-2: new full speed USB device using uhci_hcd and address 2 usb 1-2: 05-wait_for_sys timed out on ep0in SCSI subsystem initialized scsi0 : hpusbscsi hpusbscsi->state = FREE at line 231 hpusbscsi->state = BEGINNING at line 237 hpusbscsi->state = BEGINNING at line 470 hpusbscsi->state = WORKING at line 473 Data transfer done hpusbscsi->state = WORKING at line 427 Getting status byte 0 hpusbscsi->state = WAIT at line 335 hpusbscsi->state = FREE at line 339 hpusbscsi->state = FREE at line 231 hpusbscsi->state = BEGINNING at line 237 hpusbscsi->state = BEGINNING at line 470 hpusbscsi->state = WORKING at line 473 Data transfer done hpusbscsi->state = WORKING at line 427 Getting status byte 0 hpusbscsi->state = WAIT at line 335 hpusbscsi->state = FREE at line 339 Vendor: HP Model: ScanJet 5370C Rev: 6.00 Type: Scanner ANSI SCSI revision: 02 usbcore: registered new driver hpusbscsi usb 1-2: 05-wait_for_sys timed out on ep0in

Bob Goodwin


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]