CD and DVD I/O issue
Jim Cornette
fc-cornette at insight.rr.com
Sun Jun 26 11:41:05 UTC 2005
Benjamin Sher wrote:
> Dear friends:
>
> I have two CD drives: "cdrom: and "cdrom1". "cdrom" is also a
> CDWriter. "cdrom1" is my DVD player. Both of them work fine: My music
> CD plays fine in KSCD and my movies play fine in my DVD drive. Yet,
> there is a definite I/O problem with both of them. Please see
> screenshot:
>
> http://www.websher.net/temp/xmms6.png
>
> Bootup confirms that both hdc and hdd, that is, "cdrom" and
> "cdrom1"have failed the test and that they have an I/O problem.
>
> I have no idea what this means. Does this have anything to do with
> IRQ? If so, how should I try to solve this.
There are jumpers on the CDROMs that let you set up the drives as master
and slave. Since the drives seem to be working and are recognized as hdc
and hdd, I doubt that is the problem.
The only things that I can think of are for the cables being defective
or loose. Another possibility is that having both CDROMs on the same
controller stresses the IDE controller on your system board. I had an
old Memorex that loaded down the controller heavily, making both
devices fail.
Check the jumpers on the drives and set one to master, check cables. Try
one connected at a time and see if the errors are specific to either device.
Just a few things that I'd try.
Jim
>
> Thank you so much.
>
> Is it normal for bootup to say that hdc and hdd have failed? Is there
> a way to correct this for both hdc and hdd. Is this a matter of IRQ?
>
> I then decided to edit /etc/fstab. Here is the old version:
>
> [sher at localhost ~]$ cat /etc/fstab # This file is edited by
> fstab-sync - see 'man fstab-sync' for details
> /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3
> defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm
> tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs
> defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0
> /dev/sda4 /media/IOMEGA vfat
> pamconsole,noatime,sync,fscontext=system_u:object_
> r:removable_t,exec,noauto,managed 0 0 /dev/hdd /media/cdrom auto
> pamconsole,fscontext=system_u:object_r:removable_t
> ,exec,noauto,managed 0 0 /dev/hdc /media/cdrecorder auto
> pamconsole,fscontext=system_u:object_r:removable_t
> ,exec,noauto,managed 0 0 /dev/fd0 /media/floppy auto
> pamconsole,fscontext=system_u:object_r:removable_t
> ,exec,noauto,managed 0 0 [sher at localhost ~]$
>
>
> Here is the new version:
>
> [sher at localhost ~]$ cat /etc/fstab # This file is edited by
> fstab-sync - see 'man fstab-sync' for details
> /dev/VolGroup00/LogVol00 / ext3 defaults 1 1 LABEL=/boot /boot ext3
> defaults 1 2 none /dev/pts devpts gid=5,mode=620 0 0 none /dev/shm
> tmpfs defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs
> defaults 0 0 /dev/VolGroup00/LogVol01 swap swap defaults 0 0 /dev/hdd
> /media/cdrom auto noauto,user,exec,ro 0 0 /dev/hdc /media/cdrecorder
> autonoauto,user,exec,ro 0 0 /dev/sda4 /media/IOMEGA vfat
> pamconsole,noatime,sync,fscontext=system_u:object_
> r:removable_t,exec,noauto,managed 0 0 /dev/fd0 /media/floppy auto
> pamconsole,fscontext=system_u:object_r:removable_t
> ,exec,noauto,managed 0 0 [sher at localhost ~]$
>
> I tried. Rebooted but I still saw the "Failed" comment about hdc and
> hdd during bootup.
>
> Would appreciate your help.
>
> Thank you.
>
> Benjamin
>
>
More information about the fedora-list
mailing list