[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: need FSCK help!



On Mon October 2 2006 2:01 pm, Markku Kolkka wrote:
> The disk isn't offline, this refers to S.M.A.R.T off-line
> testing (testing in background when the disk is idle). See "man
> smartctl".
>

If I read the instrux correctly, this is my smartctl report - it 
states that it's passing an overall-health self-assessment test - 
does it seem like there's anything to indicate this drives in 
trouble? It is practically brand new. 

smartctl -a /dev/sda -d ata
smartctl version 5.36 [i686-redhat-linux-gnu] Copyright (C) 2002-6 
Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model:     ST3160023AS
Serial Number:    3JS0JS3W
Firmware Version: 3.05
User Capacity:    160,041,885,696 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Mon Oct  2 22:12:31 2006 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection 
activity
                                        was completed without 
error.
                                        Auto Offline Data 
Collection: Enabled.
Self-test execution status:      (   0) The previous self-test 
routine completed
                                        without error or no 
self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 430) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline 
immediate.
                                        Auto Offline data 
collection on/off support.
                                        Suspend Offline collection 
upon new
                                        command.
                                        Offline surface scan 
supported.
                                        Self-test supported.
                                        No Conveyance Self-test 
supported.
                                        Selective Self-test 
supported.
SMART capabilities:            (0x0003) Saves SMART data before 
entering
                                        power-saving mode.
                                        Supports SMART auto save 
timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging 
support.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 111) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   056   050   006    Pre-fail  
Always       -       33286965
  3 Spin_Up_Time            0x0003   096   096   000    Pre-fail  
Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   
Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  
Always       -       0
  7 Seek_Error_Rate         0x000f   089   060   030    Pre-fail  
Always       -       918381576
  9 Power_On_Hours          0x0032   081   081   000    Old_age   
Always       -       17136
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  
Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   
Always       -       1790
194 Temperature_Celsius     0x0022   031   056   000    Old_age   
Always       -       31
195 Hardware_ECC_Recovered  0x001a   056   049   000    Old_age   
Always       -       33286965
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   
Always       -       1
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   
Offline      -       1
199 UDMA_CRC_Error_Count    0x003e   200   197   000    Old_age   
Always       -       3
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   
Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   
Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: 
smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of 
disk.
If Selective self-test is pending on power-up, resume after 0 
minute delay.

> > Is FSCK the right tool for this?
>
> No. Fsck is for correcting logical errors in the filesystem,
> this is a hardware problem in the disk drive. Back up all data
> and replace the drive.



-- 
Claude Jones
Brunswick, MD, USA


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]