NMI received for unknown reason 29 on CPU 0.

[Tony Nelson]

At 7:36 PM +0200 9/5/06, Mitja Mihelic wrote:

>Tony Nelson wrote:
>>
>>WAG: is the CPU too hot?

>I set up the sensors, and if they are reading the values correctly,
>the CPU temperature is between 50 and 58 degrees centigrade.

OK, then it's not too hot.  If it were overheating, you'd see the 
temperature rise and then the problem.

>The board temp. is at about 35 and "remote" is now at 48 degrees centigrade.
>But the threshold for alarm is set to 50°C for CPU and 35°C for
>board and remote.
>Could it be that the system thinks there's real danger and tries to
>do some action
>to cool the CPU ?

Seems possible, though the voltage alarm at least doesn't do anything 
here.  Try increasing the alarm thresholds.
-- 
____________________________________________________________________
TonyN.:'                       <mailto:tonynelson at georgeanelson.com>
       '                              <http://www.georgeanelson.com/>