[Fedora-xen] XEN Kernel Panic [update]
Claus Reheis
polytropolis at gmail.com
Thu Feb 22 18:06:36 UTC 2007
Hi all!
At first I have to admit that I am very inexperienced in using XEN!
What I try to do is get OpenSuse 10.2 working on my FC6 Station.
To do that I did the following steps:
1)Installed the XEN Kernel: 2.6.19-1.2911.fc6xen
2)Installed OpenSuse 10.2 on my girlfriends Laptop
3)made a complete image of the installation and put it in my home:
/home/user/opensuse102xen.img
4)created an suse.xen.cfg:
kernel = "/boot/vmlinuz-2.6.19-1.2911.fc6xen"
ramdisk= "/boot/initrd-2.6.19-1.2911.fc6xen.img"
memory = 512
name = "opensuse102"
vif = ['']
#nics = 1
#dhcp = "dhcp"
disk = ['file:/home/rehcla/opensuse102xen.img,xvda,w']
root = "/dev/xvda ro"
5)did edit the /etc/fstab in the Image:
/dev/xvda / ext3 acl,user_xattr 1 1
#/dev/hda1 /windows/C ntfs ro,users,gid=users,umask=0002,nls=utf8 0 0
#/dev/hda2 swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
~
When I try to start Xen with:
"xm create opensuse102 -c suse.xen.cfg"
I get this:
Using config file "./suse.xen.cfg".
Started domain opensuse102
Linux version 2.6.19-1.2911.fc6xen (brewbuilder at hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.492 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 507648k/532480k available (2168k kernel code, 16360k reserved, 1106k data, 180k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8488.39 BogoMIPS (lpj=16976791)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5155k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
audit: initializing netlink socket (disabled)
audit(1172157593.055:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.19-1.2911.fc6xen (brewbuilder at hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 16:09:50 EST 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
Zone PFN ranges:
DMA 0 -> 133120
Normal 133120 -> 133120
HighMem 133120 -> 133120
early_node_map[1] active PFN ranges
0: 0 -> 133120
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 132080
Kernel command line: root=/dev/xvda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07e1000 soft=c07c1000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 3391.492 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 507648k/532480k available (2168k kernel code, 16360k reserved, 1106k data, 180k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xf5315000 - 0xf57fe000 (5028 kB)
pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
vmalloc : 0xe1000000 - 0xf4ffe000 ( 319 MB)
lowmem : 0xc0000000 - 0xe0800000 ( 520 MB)
.init : 0xc0790000 - 0xc07bd000 ( 180 kB)
.data : 0xc061e2e4 - 0xc0732bf4 (1106 kB)
.text : 0xc0400000 - 0xc061e2e4 (2168 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 8488.39 BogoMIPS (lpj=16976791)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 5155k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
audit: initializing netlink socket (disabled)
audit(1172157593.055:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key BE1C9570C411C444
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new interface driver libusual
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 180k freed
Write protecting the kernel read-only data: 387k
Red Hat nash version 5.1.19.0.2 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ata_piix.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel at redhat.com
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Making device-mapper control node
Scanning logical volumes
Reading all physical volumes. This may take a while...
No volume groups found
Activating logical volumes
Volume group "VolGroup00" not found
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Can some help me?
Thanks!
Claus Reheis
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://listman.redhat.com/archives/fedora-xen/attachments/20070222/863f805f/attachment.sig>
More information about the Fedora-xen
mailing list