[Fedora-xen] error mounting /proc: any solution ?
Frank Morane
info at vsic.net
Wed Jan 3 02:53:20 UTC 2007
Hi,
This problem has been around since September 2006. The last working
version I used was vmlinuz-2.6.16-1.2133_FC5xenU under
vmlinuz-2.6.16-1.2133_FC5xen0. The domu I try to run is CentOs 4.4 which
runs fine under FC5.
The reason I want to make it work is that we have production servers and
we wish to avoid having to re install everything and migrate a big bunch
of domains and database etc.
I am trying to run my existing domU with FC6 but I cannot get passed
this root system problem. I tried with other distros and get the same
problem, same thing with XenExpress. I am waiting from XenSource to find
out if they can help but probably too much champagne on new year's day
is delaying response. If possible I would rather stick with FCX as I had
it running without too much problem for 18 months but the updates have
become problematic since September.
I have read many, many people talking about this over the last 4 months
but not a single solution to the problem, has anyone a detailed howto to
get it up and running? I tried the faq about initrd, I am no iniscript
expert and I failed, I tried with binaries, I tried compiling from
source with many variant, with and without modules (or builtin) etc.
Alway the same result. All log simply confirms the problem below.
Also, can it be run under a FC6 dom0 on a Opteron if the domU is i686?
Finally, the doc on setting up a VMX is rather sparse, can someone point
to a more detail howto?
Regards,
[root at localhost xen]# xm create -c thoreau
Using config file "thoreau".
Started domain thoreau
Bootdata ok (command line is root=/dev/sda1 ro)
Linux version 2.6.18-1.2868.fc6xen
(brewbuilder at hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:47:25 EST 2006
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 133120
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2010.298 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB disabled
Memory: 504444k/532480k available (2321k kernel code, 19164k reserved,
1087k data, 172k init)
Calibrating delay using timer specific routine.. 5027.54 BogoMIPS
(lpj=10055097)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
audit: initializing netlink socket (disabled)
audit(1167787607.766:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key DF110FCA12BBB71F
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Bootdata ok (command line is root=/dev/sda1 ro)
Linux version 2.6.18-1.2868.fc6xen
(brewbuilder at hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Fri Dec 15 17:47:25 EST 2006
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 133120
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2010.298 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB disabled
Memory: 504444k/532480k available (2321k kernel code, 19164k reserved,
1087k data, 172k init)
Calibrating delay using timer specific routine.. 5027.54 BogoMIPS
(lpj=10055097)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
audit: initializing netlink socket (disabled)
audit(1167787607.766:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key DF110FCA12BBB71F
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2052
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vbd/2051
XENBUS: Device with no driver: device/vif/0
Write protecting the kernel read-only data: 440k
Red Hat nash version 5.1.19.0.2 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading 3w-9xxx.ko module
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Loading shpchp.ko module
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Loading libata.ko module
Loading sata_nv.ko module
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
--
Frank Morane (Free Thinker)
http://www.adventuresinlegalland.com
http://www.lysanderspooner.org
http://thoreau.eserver.org
More information about the Fedora-xen
mailing list