[K12OSN] 2 NIC, now not booting

[bimal pandit]

Dear Edwardson

could you send me the output of "ifconfig" and content of
"/etc/sysconfig/network-scripts/ifcfg-eth0" &
/etc/sysconfig/network-scripts/ifcfg-eth1" files

regards, 

bimal

On Mon, 2004-09-13 at 21:38, Petre Scheie wrote:
> I don't know if it's related to your problem or not, but using the 
> addresses you listed below means both of your NICs are now on the same 
> subnet and I suspect that will cause some routing problems.  You may 
> want to put, say, eth1 on 192.168.1.5 instead.
> 
> Petre
> 
> Edwardson Pedragosa wrote:
> 
> >Hi,
> >
> >I installed my LTSP server using two NIC. Eth0 is 192.168.0.254 and eth1
> >is 192.168.0.5 for the internet. Now my problem is I can't get it to
> >boot. Before this, I was using only one NIC connected to 2 24port
> >switch, but it seems that there a lot of traffic so I configured and
> >used 2 NIC to isolate the LTSP clients. But can't get it to boot now.
> >What will I do. I really need this for my lab.
> >
> >Thanks
> >
> >
> >_______________________________________________
> >K12OSN mailing list
> >K12OSN at redhat.com
> >https://www.redhat.com/mailman/listinfo/k12osn
> >For more info see <http://www.k12os.org>
> >
> >  
> >
> 
> 
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>