[K12OSN] Running K12LTSP on existing windows network without modifying windows server

[Les Mikesell]

On Mon, 2005-01-17 at 11:06, Huck wrote:
> Build out your K12LTSP server as you'd like it...dhcp is over 
> eth0...which is where the clients will connect...
> now... take the uplink cable to the switch in the lab... and plug it 
> into eth1 on the server...
> then plug another cable from eth0 on the server into the switch in the 
> lab...

This assumes that you have a separate switch in the lab that you
can isolate - and is the best approach if you do, or if you can
add such a switch between your eth0 interface and the local
clients. If all of your wiring goes back to a central location
you may need to use boot floppies with an alternate dhcp port.

-- 
  Les Mikesell
   les at futuresource.com