[K12OSN] Use K12LTSP with existing DHCP server

[Kevin Mims]

Wonderful!

I'll give this a try and let you know.

Thanks!

Barry Cisna <brcisna at eazylivin.net> wrote: Hi Kevin,

Is your new server a two nic server setup? If so, how about keeping your
existing Winders dhcp server " as is" and running your K12LTSP/eth0 nic,
on port 1067, to " hide "it from the Winders machines? This way you can
run 506 machines on the same subnet if you want to without even doing any
vlan hocus pocus:)
It is easy to setup your K12LTSP server to operate on port 1067 for
dishing dhcp to " just" your thin clients.
What medium are you using to boot? if you are using PXE via the onboard
nics , for example this option would be too much of a hassle for you
though.

You can also setup in your /etc/dhcp-k12ltsp.conf file to specify your
Winders dhcp server ip address at
next-server xxx.xxx.xxx.xxx;
# simply enter your winders dhcp server here

then in a bash terminal do a ' server dhcpd restart'


Let us know.

Take Care,

Barry Cisna

_______________________________________________
K12OSN mailing list
K12OSN at redhat.com
https://www.redhat.com/mailman/listinfo/k12osn
For more info see 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/k12osn/attachments/20071010/9c56b1b7/attachment.htm>