some help needed with python script to detect number of drives in kickstart file
Shabazian, Chip
Chip.Shabazian at bankofamerica.com
Fri Mar 28 21:51:07 UTC 2008
Your problem is probably in your partitioning schemes. Try building
with each scheme via kickstart. If they work then the problem is
probably in your logic, where I already see one issue. set two drives
to -eq, not -ge as 3 is always greater than 2.
-----Original Message-----
From: kickstart-list-bounces at redhat.com
[mailto:kickstart-list-bounces at redhat.com] On Behalf Of Rudi Ahlers
Sent: Friday, March 28, 2008 2:16 PM
To: Discussion list about Kickstart
Subject: Re: some help needed with python script to detect number of
drives in kickstart file
Michael DeHaan wrote:
> Rudi Ahlers wrote:
>> Hi all
>>
>> I would like to put together a kickstart script which will allow me
>> to install CentOS on many different platforms, regardless of the
>> number & types of drive installed. If the system has 3 drives, I'd
>> like to setup RAID 1 + 1 hot spare, for example. If it has 4 HDD's,
>> then I'd like to setup RAID10, and for 10 HDD's, RAID 50.
>>
>> So, after trying many different options, I still can't get it to
>> work, but recently found the following website,
>> http://evuraan.blogspot.com/2005/02/auto-finding-your-hard-drives-for
>> .html which basically outlines a way to determine how many drives are
>> in the machine, but it's very basic.
>>
> This script is a bit overkill. From cobbler's snippets directory, I
> have this for default drive selection code. You will have do a bit
> more get RAID auto-configured, but that is left as an exercise for the
> reader.
>
> %include /tmp/partinfo
>
> %pre
> # Determine how many drives we have
> set \$(list-harddrives)
> let numd=\$#/2
> d1=\$1
> d2=\$3
>
> cat << EOF > /tmp/partinfo
> part / --fstype ext3 --size=1024 --grow --ondisk=\$d1 --asprimary part
> swap --size=1024 --ondisk=\$d1 --asprimary EOF
>
>
I've tried that example already, as well, but the partitions never get
created, with the more advanced code below:
set $(list-harddrives)
let numd=$#/2 # This will provide the total # of drives
d1=$1 # This is the device of disk 1
d2=$3 # This is the device of disk 2, etc.
d3=$5
d4=$7
d5=$9
S1=$2 # This is the size of disk 1
S2=$4 # This is the size of disk 2, etc.
S3=$6
S4=$8
S5=$10
# This would be a partition scheme for three or more drives if [ $numd
-ge 3 ] ; then cat << EOF >> /tmp/partinfo
part raid.11 --size 200 --asprimary --ondrive=$d1
part raid.12 --size 2048 --asprimary --ondrive=$d1
part raid.13 --size 1 --grow --ondrive=$d1
part raid.21 --size 200 --asprimary --ondrive=$d2
part raid.22 --size 2048 --asprimary --ondrive=$d2
part raid.23 --size 1 --grow --ondrive=$d2
part raid.31 --size 200 --asprimary --ondrive=$d3
part raid.32 --size 2048 --asprimary --ondrive=$d3
part raid.33 --size 1 --grow --ondrive=$d3
raid /boot --fstype ext3 --device md0 --level=RAID1 raid.11 raid.21
raid.31 --spare=1
raid swap --fstype swap --device md1 --level=RAID1 raid.12 raid.22
raid.32 --spare=1
raid pv.01 --fstype ext3 --device md2 --level=RAID1 raid.13 raid.23
raid.33 --spare=1
logvol / --vgname=sysvg --size=3072 --name=root
logvol /usr --vgname=sysvg --size=8192 --name=usr
logvol /tmp --vgname=sysvg --size=1024 --name=tmp
logvol /var --vgname=sysvg --size=8192 --name=var
logvol /home --vgname=sysvg --size=20480 --name=home
logvol /bck --vgname=pv.02 --size=1 --grow --name=bck
EOF
elif [ $numd - ge 2 ]; then
cat << EOF >> /tmp/partinfo
part /boot --fstype ext3 --size=150 --ondisk=$d1
part swap --size=4092 --ondisk=$d1,$d2
part pv.01 --fstype ext3 --size=100 --grow --ondisk=$d1
part pv.02 --fstype ext3 --size=100 --grow --ondisk=$d2
logvol / --vgname=sysvg --size=3072 --name=root
logvol /usr --vgname=sysvg --size=8192 --name=usr
logvol /tmp --vgname=sysvg --size=1024 --name=tmp
logvol /var --vgname=sysvg --size=8192 --name=var
logvol /home --vgname=sysvg --size=20480 --name=home
EOF
else
cat << EOF >> /tmp/partinfo
part /boot --fstype ext3 --size=150 --ondisk=$d1
part swap --size=4092 --ondisk=$d1
part pv.01 --fstype ext3 --size=100 --grow --ondisk=$d1
logvol / --vgname=sysvg --size=3072 --name=root
logvol /usr --vgname=sysvg --size=8192 --name=usr
logvol /tmp --vgname=sysvg --size=1024 --name=tmp
logvol /var --vgname=sysvg --size=8192 --name=var
logvol /home --vgname=sysvg --size=20480 --name=home
EOF
fi
--
Kind Regards
Rudi Ahlers
CEO, SoftDux
Web: http://www.SoftDux.com
Check out my technical blog, http://blog.softdux.com for Linux or other
technical stuff, or visit http://www.WebHostingTalk.co.za for Web
Hosting stuff
_______________________________________________
Kickstart-list mailing list
Kickstart-list at redhat.com
https://www.redhat.com/mailman/listinfo/kickstart-list
More information about the Kickstart-list
mailing list