[libvirt] [PATCH 7/8] Enable the blkiothrottle command in virsh
Lei Li
lilei at linux.vnet.ibm.com
Fri Oct 28 09:02:48 UTC 2011
On 10/28/2011 06:02 AM, Adam Litke wrote:
> On Thu, Oct 27, 2011 at 05:20:09PM +0800, Lei HH Li wrote:
>> Signed-off-by: Zhi Yong Wu<wuzhy at linux.vnet.ibm.com>
>> Signed-off-by: Lei Li<lilei at linux.vnet.ibm.com>
>> ---
>> tools/virsh.c | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> tools/virsh.pod | 13 +++++++
>> 2 files changed, 112 insertions(+), 0 deletions(-)
>>
>> diff --git a/tools/virsh.c b/tools/virsh.c
>> index 72344f0..de86c40 100644
>> --- a/tools/virsh.c
>> +++ b/tools/virsh.c
>> @@ -6023,6 +6023,104 @@ cmdBlockJob(vshControl *ctl, const vshCmd *cmd)
>> return true;
>> }
>>
>> +/*
>> + * "blkiothrottle" command
>> + */
>> +static const vshCmdInfo info_blkiothrottle[] = {
>> + {"help", N_("Set or display a block disk I/O throttle setting.")},
>> + {"desc", N_("Set or display a block disk I/O throttle setting.")},
>> + {NULL, NULL}
>> +};
>> +
>> +static const vshCmdOptDef opts_blkiothrottle[] = {
>> + {"domain", VSH_OT_DATA, VSH_OFLAG_REQ, N_("domain name, id or uuid")},
>> + {"device", VSH_OT_DATA, VSH_OFLAG_REQ, N_("block device")},
>> + {"bps", VSH_OT_INT, VSH_OFLAG_NONE, N_("total throughput limits in bytes/s")},
>> + {"bps_rd", VSH_OT_INT, VSH_OFLAG_NONE, N_("read throughput limits in bytes/s")},
>> + {"bps_wr", VSH_OT_INT, VSH_OFLAG_NONE, N_("write throughput limits in bytes/s")},
>> + {"iops", VSH_OT_INT, VSH_OFLAG_NONE, N_("total operation limits in numbers/s")},
>> + {"iops_rd", VSH_OT_INT, VSH_OFLAG_NONE, N_("read operation limits in numbers/s")},
>> + {"iops_wr", VSH_OT_INT, VSH_OFLAG_NONE, N_("write operation limits in numbers/s")},
>> + {NULL, 0, 0, NULL}
>> +};
>> +
>> +static bool
>> +cmdBlkIoThrottle(vshControl *ctl, const vshCmd *cmd)
>> +{
>> + virDomainPtr dom = NULL;
>> + const char *name, *disk;
>> + virDomainBlockIoThrottleInfo info;
>> + virDomainBlockIoThrottleInfo reply;
>> + unsigned int flags = 0;
>> + int ret = -1;
>> +
>> + memset(&info, 0, sizeof(info));
>> +
>> + if (!vshConnectionUsability(ctl, ctl->conn))
>> + goto out;
>> +
>> + if (!(dom = vshCommandOptDomain(ctl, cmd,&name)))
>> + goto out;
>> +
>> + if (vshCommandOptString(cmd, "device",&disk)< 0)
>> + goto out;
>> +
>> + if (vshCommandOptULongLong(cmd, "bps",&info.bps)< 0) {
>> + info.bps = 0;
>> + }
>> +
>> + if (vshCommandOptULongLong(cmd, "bps_rd",&info.bps_rd)< 0) {
>> + info.bps_rd = 0;
>> + }
>> +
>> + if (vshCommandOptULongLong(cmd, "bps_wr",&info.bps_wr)< 0) {
>> + info.bps_wr = 0;
>> + }
>> +
>> + if (vshCommandOptULongLong(cmd, "iops",&info.iops)< 0) {
>> + info.iops = 0;
>> + }
>> +
>> + if (vshCommandOptULongLong(cmd, "iops_rd",&info.iops_rd)< 0) {
>> + info.iops_wr = 0;
>> + }
>> +
>> + if (vshCommandOptULongLong(cmd, "iops_wr",&info.iops_wr)< 0) {
>> + info.bps_wr = 0;
>> + }
>> +
>> + if ((info.bps == 0)&& (info.bps_rd == 0)&& (info.bps_wr == 0)
>> +&& (info.iops == 0)&& (info.iops_rd == 0)&& (info.iops_wr == 0)) {
> What if I want to set one of these values to zero (ie. erase a current limit)?
> Won't this mistakenly just print out the current settings? I think you'll need
> a bit more sophistication here.
>
Yes, it need to be improved, especially when support --current --live --config.
I didn't write it in the summary since I think it be contained in to do list #5)..
>> +
>> + ret = virDomainGetBlockIoThrottle(dom, disk,&reply, flags);
>> +
>> + if (ret != 0)
>> + goto out;
>> +
>> + vshPrint(ctl, "%-15s %llu\n", _("bps:"), reply.bps);
>> + vshPrint(ctl, "%-15s %llu\n", _("bps_rd:"), reply.bps_rd);
>> + vshPrint(ctl, "%-15s %llu\n", _("bps_wr:"), reply.bps_wr);
>> + vshPrint(ctl, "%-15s %llu\n", _("iops:"), reply.iops);
>> + vshPrint(ctl, "%-15s %llu\n", _("iops_rd:"), reply.iops_rd);
>> + vshPrint(ctl, "%-15s %llu\n", _("iops_wr:"), reply.iops_wr);
>> +
>> + virDomainFree(dom);
>> + return true;
>> + } else {
>> + flags = 1;
>> +
>> + ret = virDomainSetBlockIoThrottle(dom, disk,&info, flags);
>> +
>> + if (ret == 0) {
>> + virDomainFree(dom);
>> + return true;
>> + }
>> + }
>> +
>> +out:
>> + virDomainFree(dom);
>> + return false;
>> +}
>>
>> /*
>> * "net-autostart" command
>> @@ -14017,6 +14115,7 @@ static const vshCmdDef domManagementCmds[] = {
>> {"blkiotune", cmdBlkiotune, opts_blkiotune, info_blkiotune, 0},
>> {"blockpull", cmdBlockPull, opts_block_pull, info_block_pull, 0},
>> {"blockjob", cmdBlockJob, opts_block_job, info_block_job, 0},
>> + {"blkiothrottle", cmdBlkIoThrottle, opts_blkiothrottle, info_blkiothrottle, 0},
>> #ifndef WIN32
>> {"console", cmdConsole, opts_console, info_console, 0},
>> #endif
>> diff --git a/tools/virsh.pod b/tools/virsh.pod
>> index 775d302..61ec613 100644
>> --- a/tools/virsh.pod
>> +++ b/tools/virsh.pod
>> @@ -572,6 +572,19 @@ operation can be checked with B<blockjob>.
>> I<path> specifies fully-qualified path of the disk.
>> I<bandwidth> specifies copying bandwidth limit in Mbps.
>>
>> +=item B<blkiothrottle> I<domain> I<device> [[I<--bps> B<bps>] | [[I<--bps_rd> B<bps_rd>] [I<--bps_wr> B<bps_wr>]] [[I<--iops> B<iops>] | [[I<--iops_rd> B<iops_rd>] [I<--iops_wr> B<iops_wr>]]
>> +
>> +Set or display the block disk io limits settting.
>> +I<path> specifies block disk name.
>> +I<--bps> specifies total throughput limit in bytes/s.
>> +I<--bps_rd> specifies read throughput limit in bytes/s.
>> +I<--bps_wr> specifies write throughput limit in bytes/s.
>> +I<--iops> specifies total operation limit in numbers/s.
>> +I<--iops_rd> specifies read operation limit in numbers/s.
>> +I<--iops_wr> specifies write operation limit in numbers/s.
>> +
>> +If no limit is specified, it will query current I/O limits setting.
>> +
>> =item B<blockjob> I<domain> I<path> [I<--abort>] [I<--info>] [I<bandwidth>]
>>
>> Manage active block operations.
>> --
>> 1.7.1
>>
--
Lei
More information about the libvir-list
mailing list