[libvirt] make dist failed

[Wen Congyang]

At 06/12/2012 08:55 PM, Eric Blake Wrote:
> On 06/12/2012 12:57 AM, Wen Congyang wrote:
>> At 06/12/2012 02:49 PM, Osier Yang Wrote:
>>> On 2012年06月12日 09:59, Wen Congyang wrote:
>>>> make dist failed with the following error:
>>>>
>>>> make[1]: Entering directory `/home/wency/source/libvirt/src'
>>>>    GEN    rpc/virnetprotocol.h
>>>>    GEN    rpc/virnetprotocol.c
>>>>    GEN    rpc/virkeepaliveprotocol.h
>>>>    GEN    rpc/virkeepaliveprotocol.c
>>>>    GEN    remote/remote_protocol.h
>>>>    GEN    remote/remote_protocol.c
>>>>    GEN    remote/qemu_protocol.h
>>>>    GEN    remote/qemu_protocol.c
>>>>    GEN    remote/qemu_client_bodies.h
>>>>    GEN    util/virkeymaps.h
>>>>    CC     libvirt_driver_remote_la-remote_protocol.lo
>>>> In file included from ./remote/remote_protocol.h:17,
>>>>                   from ./remote/remote_protocol.c:7:
>>>> ./internal.h:300:31: error: libvirt_probes.h: No such file or directory
> 
> Can you give the steps to reproduce it?  I'm assuming this was a fresh
> git clone, in-tree build, ./autogen.sh with no special options, on
> GNU/Linux with dtrace available?

Steps to reproduce it:
1. use 'git clone' to get a clean tree
2. ./autogen.sh
3. make dist

The OS is RHEL6.2, and the configure summary is:
configure: Configuration summary
configure: =====================
configure: 
configure: Drivers
configure: 
configure:      Xen: no
configure:     QEMU: yes
configure:      UML: yes
configure:   OpenVZ: yes
configure:   VMware: yes
configure:     VBox: yes
configure:   XenAPI: no
configure: xenlight: no
configure:      LXC: yes
configure:     PHYP: no
configure:      ESX: yes
configure:  Hyper-V: no
configure:     Test: yes
configure:   Remote: yes
configure:  Network: yes
configure: Libvirtd: yes
configure:    netcf: yes
configure:  macvtap: yes
configure: virtport: yes
configure: 
configure: Storage Drivers
configure: 
configure:      Dir: yes
configure:       FS: yes
configure:    NetFS: yes
configure:      LVM: yes
configure:    iSCSI: yes
configure:     SCSI: yes
configure:    mpath: yes
configure:     Disk: yes
configure:      RBD: no
configure: 
configure: Security Drivers
configure: 
configure:  SELinux: yes (/selinux)
configure: AppArmor: no
configure: 
configure: Driver Loadable Modules
configure: 
configure:   dlopen: -export-dynamic -ldl
configure: 
configure: Libraries
configure: 
configure:   libxml: -I/usr/include/libxml2   -lxml2  
configure:   dlopen: -ldl
configure:  libcurl: -DCURL_DISABLE_TYPECHECK   -lcurl  
configure: openwsman: no
configure:  libssh2:  
configure:   gnutls:   -lgnutls   -lgcrypt
configure:     sasl:   -lsasl2
configure:     yajl:   -lyajl
configure:  sanlock:   -lsanlock_client
configure:    avahi: -D_REENTRANT   -lavahi-common -lavahi-client  
configure:   polkit: /usr/bin/pkcheck (version 1)
configure:    audit:   -laudit
configure:  selinux:  -lselinux
configure: apparmor: no
configure:  numactl:  -lnuma
configure:    capng:  -lcap-ng
configure:      xen: no
configure:   xenapi: no
configure: xenlight: no
configure:      hal: -DDBUS_API_SUBJECT_TO_CHANGE -I/usr/include/hal -I/usr/include/dbus-1.0 -I/usr/lib64/dbus-1.0/include   -L/lib64 -lhal -ldbus-1 -lpthread -lrt  
configure:     udev:   -ludev     -lpciaccess  
configure:    netcf:   -lnetcf  
configure:     pcap:  -lpcap
configure:       nl:   -lnl  
configure:    mscom: no
configure:      xdr: 
configure: 
configure: Test suite
configure: 
configure:    Coverage: no
configure:   Alloc OOM: no
configure: 
configure: Miscellaneous
configure: 
configure:         Debug: yes
configure:   Use -Werror: yes
configure: Warning Flags:  -Wall -W -Wformat-y2k -Wformat-security -Winit-self -Wmissing-include-dirs -Wunused -Wunknown-pragmas -Wstrict-aliasing -Wshadow -Wpointer-arith -Wbad-function-cast -Wcast-align -Wwrite-strings -Wlogical-op -Waggregate-return -Wstrict-prototypes -Wold-style-definition -Wmissing-prototypes -Wmissing-declarations -Wmissing-noreturn -Wmissing-format-attribute -Wredundant-decls -Wnested-externs -Winline -Winvalid-pch -Wvolatile-register-var -Wdisabled-optimization -Wbuiltin-macro-redefined -Wmudflap -Wpacked-bitfield-compat -Wsync-nand -Wattributes -Wcoverage-mismatch -Wdeprecated-declarations -Wdiv-by-zero -Wendif-labels -Wextra -Wformat-contains-nul -Wformat-extra-args -Wformat-zero-length -Wformat=2 -Wmultichar -Wnormalized=nfc -Woverflow -Wpointer-to-int-cast -Wpragmas -Wno-missing-field-initializers -Wno-sign-compare -Wno-format-nonliteral -Wframe-larger-than=4096 -fstack-protector-all --param=ssp-buffer-size=4 -fexceptions -fasynchronous-unwind-ta
bles -fdiagnostics-show-option -funit-at-a-time -fipa-pure-const -Wno-suggest-attribute=pure -Wno-suggest-attribute=const -Werror
configure:      Readline: yes
configure:        Python: yes
configure:        DTrace: yes
configure:         numad: no
configure:   XML Catalog: /etc/xml/catalog
configure:   Init script: redhat
configure: Console locks: /var/lock
configure: 
configure: Privileges
configure: 
configure:       QEMU: root:root
configure: 

> 
>>>>
>>>
>>> Looks like libvirt_probes.h is not generated, is dtrace available
>>> on your host?
>>
>> Yes, dtrace is available on my host. I do it in a clean tree. I guess
>> there is some bug in src/Makefile.am, but I have no time to investigate
>> recently, so I report this bug here.
> 
> Uggh.  I'm really tired of mucking around with this makefile, because it
> seems every time I whack one mole, another one pops up.  Maybe this time
> I'll get it right.
> 

I revert some commits and test the building. I find that this problem is
introduced by the commit 7bff56a0d1514cb955eb14adc14281626e80e96c.

Thanks
Wen Congyang