[Linux-cluster] Can't get past Segmentation Faults

[isplist at logicore.net]

Does this output make any sense to anyone? Storage shows up under the adapter 
but not the scsi devices noe fdisk? Yet it shows up on fdisk on another node? 
I'm VERY confused here :).


# cat /proc/scsi/scsi
Attached devices:

]# cat /proc/scsi/qla2xxx/0|more
QLogic PCI to Fibre Channel Host Adapter for QLA22xx:
        Firmware version 2.02.08 TP, Driver version 8.01.04-d7
ISP: ISP2200, Serial# C57427
Request Queue = 0x1f400000, Response Queue = 0x1782000
Request Queue count = 2048, Response Queue count = 64
Total number of active commands = 0
Total number of interrupts = 2932
    Device queue depth = 0x10
Number of free request entries = 2039
Number of mailbox timeouts = 0
Number of ISP aborts = 0
Number of loop resyncs = 0
Number of retries for empty slots = 0
Number of reqs in pending_q= 0, retry_q= 0, done_q= 0, scsi_retry_q= 0
Host adapter:loop state = <READY>, flags = 0x883
Dpc flags = 0x4000000
MBX flags = 0x0
Link down Timeout = 000
Port down retry = 008
Login retry count = 008
Commands retried with dropped frame(s) = 0
Product ID = 4953 5020 2020 0001


SCSI Device Information:
scsi-qla0-adapter-node=200000e08b0393ed;
scsi-qla0-adapter-port=210000e08b0393ed;
scsi-qla0-target-0=23000080e512699a;
scsi-qla0-target-1=21000080e511feb0;
scsi-qla0-target-2=100000e00221fd57;
scsi-qla0-target-3=21000cc001000c8d;

FC Port Information:
scsi-qla0-port-0=200000e08b01099c:210000e08b01099c:6a1200:81;
scsi-qla0-port-1=200000e08b054e4f:210000e08b054e4f:6a1300:4;
scsi-qla0-port-2=200000e08b0c4d02:210000e08b0c4d02:6a1400:82;
scsi-qla0-port-3=200000e08b081bd7:210000e08b081bd7:6a1500:83;
scsi-qla0-port-4=200000e08b038fed:210000e08b038fed:6a1600:84;
scsi-qla0-port-5=200000e08b083ed7:210000e08b083ed7:6a1700:85;
scsi-qla0-port-6=200000e08b0395ed:210000e08b0395ed:6a1800:86;
scsi-qla0-port-7=200000e08b0394ed:210000e08b0394ed:6a1900:87;
scsi-qla0-port-8=200000e08b00caec:210000e08b00caec:6a1a00:88;
scsi-qla0-port-9=20000080e512699a:23000080e512699a:6a1cef:89;
scsi-qla0-port-10=200000e08b0832d7:210000e08b0832d7:6a1d00:8a;
scsi-qla0-port-11=20000080e511feb0:21000080e511feb0:6a1eef:8b;
scsi-qla0-port-12=100000e00201fd57:100000e00221fd57:6a1f00:8c;
scsi-qla0-port-13=200000e08b0843d7:210000e08b0843d7:691400:6;
scsi-qla0-port-14=200000e08b19b178:210000e08b19b178:691500:5;
scsi-qla0-port-15=200000e08b078f24:210000e08b078f24:691600:8e;
scsi-qla0-port-16=200000e08b038eed:210000e08b038eed:691700:7;
scsi-qla0-port-17=50050cc001000c8d:21000cc001000c8d:691ddc:8f;

SCSI LUN Information:
(Id:Lun)  * - indicates lun is not registered with the OS.
( 0: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:89 00
( 0: 1): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:89 00
( 0: 2): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:89 00
( 1: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8b 00
( 1: 1): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8b 00
( 1: 2): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8b 00
( 2: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8c 00
( 2: 1): Total reqs 0, Pending reqs 0, flags 0x0, 0:0:8c 0c
( 3: 0): Total reqs 0, Pending reqs 0, flags 0x0*, 0:0:8f 00

# fdisk -l

Disk /dev/hda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/hda1   *           1        4767    38290896   83  Linux
/dev/hda2            4768        4865      787185   82  Linux swap