[Linux-cluster] Sun ILOM

[Fabian Salamanca Dominguez]

Works great with IPMI!

How could I write an agent for the ILOM?

Thanks and BR

On Nov 22, 2007 2:22 AM, Brieseneck, Arne, VF-Group
<Arne.Brieseneck at vodafone.com> wrote:
> Hi Fabian,
>
> I have created a new account on each ILOM board. This account is
> mentioned in the cluster.conf section.
>
>
> Cheers,
> Arne
>
> -----Original Message-----
> From: linux-cluster-bounces at redhat.com
>
> [mailto:linux-cluster-bounces at redhat.com] On Behalf Of Fabian Salamanca
> Dominguez
> Sent: Mittwoch, 21. November 2007 21:48
> To: linux clustering
> Subject: Re: [Linux-cluster] Sun ILOM
>
> Thanks all for the prompt responses!
>
> Arne,
>
> I have a doubt, which type of authentication do you use for ILOM's IPMI
> configuration in the fence devices section?
>
> thanks!!!
>
> On Nov 13, 2007 9:52 AM, Brieseneck, Arne, VF-Group
> <Arne.Brieseneck at vodafone.com> wrote:
> >
> >
> > I have a 40 node SUN X4100 cluster with fence_ipmilan running.
> > If you have any questions let me know...
> >
> >
> >  ________________________________
> >  From: linux-cluster-bounces at redhat.com
> > [mailto:linux-cluster-bounces at redhat.com] On Behalf Of Fair, Brian
> > Sent: Dienstag, 13. November 2007 16:33
> > To: linux clustering
> > Subject: RE: [Linux-cluster] Sun ILOM
> >
> >
> >
> >
> > I'm sure you know this, but Sun has shipped several different out of
> > band management solutions over the years. They have different
> > software, commands, and features.
> >
> > Some (all maybe, couldn't say) of the newer stuff is IPMI...
> > coolthreads, the newer x86 based boxes certainly, etc. There are a few
>
> > different types it could be if its older equipment.
> >
> > Just something to keep in mind if you hear that IPMI is working for a
> > Sun box.
> >
> > Curious -- what kind of hardware are you building out your cluster on?
> >
> > -Brian
> >
> >  ________________________________
> >  From: linux-cluster-bounces at redhat.com
> > [mailto:linux-cluster-bounces at redhat.com] On Behalf Of Dave Costakos
> > Sent: Monday, November 12, 2007 2:21 PM
> > To: linux clustering
> > Subject: Re: [Linux-cluster] Sun ILOM
> >
> >
> > I should say that I am successfully using fence_ipmi in a 3-node Sun
> > 4600 cluster -- though I obviously had to connect to the iLOM via the
> > network interface rather than the serial interface (which is our
> normal procedure).
> >
> > -Dave.
> >
> >
> > On Nov 12, 2007 9:02 AM, Kevin Anderson <kanderso at redhat.com> wrote:
> >
> > >
> > >
> > > On Mon, 2007-11-12 at 10:48 -0600, Fabian Salamanca Dominguez wrote:
> > >
> > > Hi!
> > >
> > > Are Sun's LOM and ILOM cards supported as fencing devices for Red
> > > Hat Cluster Suite?
> > >
> > >
> > > No one has implemented a fencing script for those devices as of yet.
>
> > > I
> > believe people have had success using fence_ipmi with the Sun
> > hardware, so you might want to try that.  Alternatively, if you have
> > access to the hardware, take a look at implementing the fence agent.
> > >
> > > Kevin
> > > --
> > > Linux-cluster mailing list
> > > Linux-cluster at redhat.com
> > > https://www.redhat.com/mailman/listinfo/linux-cluster
> > >
> >
> >
> >
> > --
> > Dave Costakos
> > mailto:david.costakos at gmail.com
> > --
> > Linux-cluster mailing list
> > Linux-cluster at redhat.com
> > https://www.redhat.com/mailman/listinfo/linux-cluster
> >
>
>
>
> --
> Fabian
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>



-- 
Fabian