[Linux-cluster] Ethernet Channel Bonding Configuration Clarification is Needed

[Rajagopal Swaminathan]

2008/9/16 Alan A <alan.zg at gmail.com>

> You have to look for the bonding option in /etc/modprobe.conf .. Mode 1 is
> going to use only one NIC at the time and engage the other NIC only if the
> first one fails. Try mode 0 which is round robin or mode 5 or 6.
>
>
>  have configured Cluster Suite with 2 servers
>> Server 1 : 192.168.13.110 IP Address and hostname is primary
>> Server 2 : 192.168.13.179 IP Address and hostname is secondary
>> Floating : 192.168.13.83 IP Address (Assumed by currently active server)
>>
>> I have configured Ethernet Channel Bonding in Each Cluster Nodes as per
>> the below link
>>
>> <http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/s1-hardware-connect.html#S2-HARDWARE-ETHBOND>
>>
>
another thing to check is that multicasting is on in the switch (if it is a
managable one) handling the cluster heartbeat .... That is known to have
caused quite a few anxious moments for the clusterites in the past...
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20080918/f1119aa9/attachment.htm>