[Linux-cluster] ipmi activates session, but no talk.
Emmanuel Thomé
Emmanuel.Thome at normalesup.org
Thu Jul 2 09:56:17 UTC 2009
Hi.
I'm trying to set up ipmi (1.5) management using the bmc on ibm
eserver326 machines. Yes, these machines are old.
So far, I've been able to access the bmc with ipmitool, and configure it
as correctly as I could for remote access.
When trying to access it from afar, I successfully activate a session,
but further requests are unanswered.
Some dumps of ipmitool commands are included below.
If anybody has an idea of what's going on, that would be greatly
appreciated.
I might also try to flash the bmc firmware, as it seems that ibm released
a newer firmware for these servers. But I'm already a bit puzzled by
the situation so far.
Thanks,
E.
I'm trying to access the bmc with IP 152.81.4.81 from the host with IP
152.81.3.83. The BMC piggies-back on the eth0 NIC which has IP
152.81.3.81 for the system. Thus the BMC and the system both have
different MAC and IPs. Seems to work fine as some kind of conversation
occurs.
Here's the output of a remote ipmi request:
[root at cassandre ~]# IPMI_PASSWORD=xxx ipmitool -vvI lan -L USER -H 152.81.4.81 -E mc info
ipmi_lan_send_cmd:opened=[0], open=[4490512]
IPMI LAN host 152.81.4.81 port 623
Sending IPMI/RMCP presence ping packet
ipmi_lan_send_cmd:opened=[1], open=[4490512]
Channel 01 Authentication Capabilities:
Privilege Level : USER
Auth Types : MD5
Per-msg auth : disabled
User level auth : disabled
Non-null users : enabled
Null users : enabled
Anonymous login : disabled
Proceeding with AuthType MD5
ipmi_lan_send_cmd:opened=[1], open=[4490512]
Opening Session
Session ID : 751168e4
Challenge : e44e37374801833f77701411992dae25
Privilege Level : USER
Auth Type : MD5
ipmi_lan_send_cmd:opened=[1], open=[4490512]
Session Activated
Auth Type : MD5
Max Priv Level : USER
Session ID : 751168e4
Inbound Seq : 00000001
opened=[1], open=[4490512]
No response from remote controller
Get Device ID command failed
ipmi_lan_send_cmd:opened=[1], open=[4490512]
No response from remote controller
Close Session command failed
On the machine I'm trying to talk to, I have in particular:
[root at achille ~]# ipmitool -I open session info all
[...]
session handle : 255
slot count : 4
active sessions : 1
user id : 1
privilege level : USER
session type : IPMIv1.5
channel number : 0x01
console ip : 152.81.3.83
console mac : 00:00:00:00:00:00
console port : 60599
[...]
[root at achille ~]# /usr/bin/ipmitool -I open lan print
Set in Progress : Set Complete
Auth Type Support : NONE MD5 PASSWORD
Auth Type Enable : Callback : MD5
: User : MD5
: Operator : MD5
: Admin : MD5
: OEM : NONE MD5 PASSWORD
IP Address Source : Static Address
IP Address : 152.81.4.81
Subnet Mask : 255.255.240.0
MAC Address : 00:0d:60:18:7c:47
SNMP Community String : public
IP Header : TTL=0x00 Flags=0x00 Precedence=0x00 TOS=0x00
Default Gateway IP : 152.81.1.1
Default Gateway MAC : 00:13:5f:89:14:00
Backup Gateway IP : 192.168.0.2
Backup Gateway MAC : 00:00:00:00:00:02
Cipher Suite Priv Max : Not Available
[root at achille ~]# ipmitool user list 1
ID Name Callin Link Auth IPMI Msg Channel Priv Limit
1 true false true ADMINISTRATOR
2 root true true true OPERATOR
3 USERID true true true ADMINISTRATOR
4 OEM true true true OEM
[root at achille ~]# ipmitool -I open channel info 1
Channel 0x1 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 1
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : disabled
Access Mode : always available
More information about the Linux-cluster
mailing list