[Linux-cluster] fence_cisco_ucs issue within cluster.conf

[Jayesh Shinde]

Hello ,

My issue resolved by removing the --suborg  from cluster.conf

Redhat KB https://access.redhat.com/solutions/785903# syntax not worked 
with me  for RHEL 6.5  i.e for --suborg

IN KB its mentioned as :-- "While invoking |fence_cisco_ucs| agent from 
command line, please add |/org-| prefix to the real organization path 
like below

|$ fence_cisco_ucs --ip="a.b.c.d" --username="admin" --password="XXXXX" 
-z 1 --plug="UCSPROFILE2" --suborg="/org-RHEL/" -o status -v|


with above stntax , Error remain same  as follows below :--

[root at mailbox2 ~]# fence_cisco_ucs --ip="172.17.1.30" --username="KVM" 
--password="myPassword" -z 1 --plug="mailbox1" 
--suborg="/org-root/ls-mailbox" -o status -v
[root at mailbox2 ~]# fence_cisco_ucs --ip="172.17.1.30" --username="KVM" 
--password="myPassword" -z 1 --plug="mailbox1" --suborg="/org-root/" -o 
status -v

*Failed:* Unable to obtain correct plug status or plug is not available.

Where As if I remove --suborg , then its working properly , as follows.

[root at mailbox2 ~]# fence_cisco_ucs --ip="172.17.1.30" --username="KVM" 
--password="myPassword" -z 1 --plug="mailbox1"  -o status -v
*Status:* ON

The same logic I used in cluster.conf and now fencing working fine :--)

   <fencedevices>
     <fencedevice agent="fence_cisco_ucs" ipaddr="172.17.1.30" 
ipport="443" login="KVM" name="CiscoFence" passwd="myPassword" ssl="on"/>
   </fencedevices>

Thanks

Regards
Jayesh Shinde

On 11/04/2015 02:50 PM, Marek marx Grác wrote:
> Hi,
>
> Thanks for a great report. I believe that problem is that in cluster.conf you set up ‘suborg=“/org-root/ls-mailbox” but on the command line you have it without “--" so it is not used at all. It is best shown at that verbose output.
>
> On 2 November 2015 at 15:39:45, Jayesh Shinde (jayesh.shinde at netcore.co.in) wrote:
>
>> command line fencing :--
>> -----------------------------
>> [root at mailbox2 ~]# /usr/sbin/fence_cisco_ucs -a 172.17.1.30 -l KVM -p
>> 'myPassword' -o status -v -z --plug=mailbox1 --ipport=443
>> suborg="/org-root/ls-mailbox" ; *echo $?*
>>   
>>> outCookie="1446038319/bdd0ea5b-386f-4374-8eca-9ff7595c33f3"
>> outRefreshPeriod="600" outPriv="pn-equipment,pn-maintenance,read-only"
>> outDomains="" outChannel="noencssl" outEvtChannel="noencssl"
>> outSessionId="web_29402_B" outVersion="2.2(3d)" outName="KVM">
>>> cookie="1446038319/bdd0ea5b-386f-4374-8eca-9ff7595c33f3"
>> inHierarchical="false" dn="org-root/ls-mailbox1/power"/>
>>> cookie="1446038319/bdd0ea5b-386f-4374-8eca-9ff7595c33f3" response="yes">
> As you can see dn is org-root/ls-mailbox1/... with suborg set it will be org-root/ls-mailbox/ls-mailbox1/...
> It should be enough to remove sub-org part from your cluster.conf
>
> m,
>
>
>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20151104/6bc9fe56/attachment.htm>