[linux-lvm] Help! unable to mount lv's - can't see why!

Robin Edgar - Tripany red at tripany.com
Wed Sep 18 06:37:42 UTC 2002


Hi,

I had 4 (ide) disks in an array (and 1 vg) of which one (hde) broke. As I was not too sure of the stability of the system, I decided to do a dd of the disk byte by byte to another identical disk. After this was done (with loads of sector unreadable errors) I replaced the old disk with the new disk, rebooted the system and by all standards all seems well (see below):
Unfortunately, only the /dev/tripserv_vol/docu will mount well!
/dev/tripserv_vol/pages gives the following error:

# mount /dev/tripserv_vol/pages /c
mount: you must specify the filesystem type

# mount /dev/tripserv_vol/pages /c -t ext3
mount: wrong fs type, bad option, bad superblock on /dev/tripserv_vol/pages,
       or too many mounted file systems

Anyone have any ideas why it won't mount?!

Cheers,
Robin Edgar

#pvscan:
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- ACTIVE   PV "/dev/hdg1" of VG "tripserv_vol" [38.16 GB / 7.93 GB free]
pvscan -- ACTIVE   PV "/dev/hdh1" of VG "tripserv_vol" [38.16 GB / 8.01 GB free]
pvscan -- ACTIVE   PV "/dev/hde1" of VG "tripserv_vol" [55.91 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/hdf1" of VG "tripserv_vol" [55.91 GB / 3.37 GB free]
pvscan -- total: 4 [188.16 GB] / in use: 4 [188.16 GB] / in no VG: 0 [0]

(identical output to before changing the disks around)

#pvdisplay /dev/hde1
--- Physical volume ---
PV Name               /dev/hde1
VG Name               tripserv_vol
PV Size               55.92 GB [117266625 secs] / NOT usable 4.18 MB [LVM: 179 KB]
PV#                   1
PV Status             available
Allocatable           yes (but full)
Cur LV                20
PE Size (KByte)       4096
Total PE              14313
Free PE               0
Allocated PE          14313
PV UUID               KCIKwa-3lvx-k7bj-27ks-hGlI-oZRo-5q7CjM

(also identical)

#vgck -v
vgck -- locking logical volume manager
vgck -- finding all volume group(s)
vgck -- checking volume group name "tripserv_vol"
vgck -- checking existence of volume group "tripserv_vol"
vgck -- reading volume group data for "tripserv_vol" from lvmtab
vgck -- checking volume group consistency  of "tripserv_vol" in lvmtab
vgck -- VGDA of "tripserv_vol" in lvmtab is consistent
vgck -- reading volume group data for "tripserv_vol" from physical volume(s)
vgck -- checking volume group consistency  of "tripserv_vol" on physical volumes
vgck -- VGDA of "tripserv_vol" on physical volumes is consistent
vgck -- unlocking logical volume manager

# vgdisplay
--- Volume group ---
VG Name               tripserv_vol
VG Access             read/write
VG Status             available/resizable
VG #                  0
MAX LV                255
Cur LV                22
Open LV               1
MAX LV Size           255.99 GB
Max PV                255
Cur PV                4
Act PV                4
VG Size               188.13 GB
PE Size               4 MB
Total PE              48162
Alloc PE / Size       43220 / 168.83 GB
Free  PE / Size       4942 / 19.30 GB
VG UUID               KDiCWx-ae2w-oDnx-Hl5O-Amhd-fIM3-y51bIX

# vgscan -v
vgscan -- removing "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- scanning for all active volume group(s) first
vgscan -- found active volume group "tripserv_vol"
vgscan -- reading data of volume group "tripserv_vol" from physical volume(s)
vgscan -- inserting "tripserv_vol" into lvmtab
vgscan -- backing up volume group "tripserv_vol"
vgscan -- checking volume group name "tripserv_vol"
vgscan -- checking volume group consistency of "tripserv_vol"
vgscan -- checking existence of "/etc/lvmtab.d"
vgscan -- storing volume group data of "tripserv_vol" in "/etc/lvmtab.d/tripserv_vol.tmp"
vgscan -- storing physical volume data of "tripserv_vol" in "/etc/lvmtab.d/tripserv_vol.tmp"
vgscan -- storing logical volume data of volume group "tripserv_vol" in "/etc/lvmtab.d/tripserv_vol.tmp"
vgscan -- renaming "/etc/lvmtab.d/tripserv_vol.tmp" to "/etc/lvmtab.d/tripserv_vol"
vgscan -- removing special files and directory for volume group "tripserv_vol"
vgscan -- creating directory and group character special file for "tripserv_vol"
vgscan -- creating block device special files for tripserv_vol
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group

#lvscan
lvscan -- ACTIVE   Original "/dev/tripserv_vol/docu" [512 MB] striped[4]
lvscan -- ACTIVE   Original "/dev/tripserv_vol/install" [10 GB] striped[4]
lvscan -- ACTIVE   Original "/dev/tripserv_vol/pages" [20 GB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/gfx" [10 GB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/sfx" [10 GB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/people" [20 GB] striped[4]
lvscan -- ACTIVE   Original "/dev/tripserv_vol/dim" [2 GB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/mp3" [20 GB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/applications" [2 GB] striped[4]
lvscan -- ACTIVE   Original "/dev/tripserv_vol/code" [512 MB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/dumpdir" [10 GB] striped[4]
lvscan -- ACTIVE   Original "/dev/tripserv_vol/homes" [10 GB] striped[4]
lvscan -- ACTIVE   Original "/dev/tripserv_vol/info" [5 GB] striped[4]
lvscan -- ACTIVE            "/dev/tripserv_vol/log" [252 MB] striped[3]
lvscan -- ACTIVE            "/dev/tripserv_vol/store" [608 MB] striped[4]
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/docusnap" [492.19 MB] of /dev/tripserv_vol/docu
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/installsnap" [9.84 GB] of /dev/tripserv_vol/install
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/dimsnap" [1.97 GB] of /dev/tripserv_vol/dim
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/codesnap" [504 MB] of /dev/tripserv_vol/code
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/pagessnap" [19.69 GB] of /dev/tripserv_vol/pages
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/infosnap" [4.92 GB] of /dev/tripserv_vol/info
lvscan -- ACTIVE   Snapshot "/dev/tripserv_vol/homessnap" [9.84 GB] of /dev/tripserv_vol/homes
lvscan -- 22 logical volumes with 168.08 GB total in 1 volume group
lvscan -- 22 active logical volumes

# lvdisplay /dev/tripserv_vol/docu
--- Logical volume ---
LV Name                /dev/tripserv_vol/docu
VG Name                tripserv_vol
LV Write Access        read/write
LV snapshot status     source of
                       /dev/tripserv_vol/docusnap [active]
LV Status              available
LV #                   1
# open                 1
LV Size                512 MB
Current LE             128
Allocated LE           128
Stripes                4
Stripe size (KByte)    4
Allocation             next free
Read ahead sectors     120
Block device           58:0

# lvdisplay /dev/tripserv_vol/people
--- Logical volume ---
LV Name                /dev/tripserv_vol/people
VG Name                tripserv_vol
LV Write Access        read/write
LV Status              available
LV #                   6
# open                 0
LV Size                20 GB
Current LE             5120
Allocated LE           5120
Stripes                4
Stripe size (KByte)    4
Allocation             next free
Read ahead sectors     120
Block device           58:5

# lvdisplay /dev/tripserv_vol/pages
--- Logical volume ---
LV Name                /dev/tripserv_vol/pages
VG Name                tripserv_vol
LV Write Access        read/write
LV snapshot status     source of
                       /dev/tripserv_vol/pagessnap [active]
LV Status              available
LV #                   3
# open                 0
LV Size                20 GB
Current LE             5120
Allocated LE           5120
Stripes                4
Stripe size (KByte)    4
Allocation             next free
Read ahead sectors     120
Block device           58:2

tripserv:/# lvdisplay /dev/tripserv_vol/pagessnap
--- Logical volume ---
LV Name                /dev/tripserv_vol/pagessnap
VG Name                tripserv_vol
LV Write Access        read only
LV snapshot status     active destination for /dev/tripserv_vol/pages
LV Status              available
LV #                   20
# open                 0
LV Size                20 GB
Current LE             5120
Allocated LE           5120
snapshot chunk size    64 KB
Allocated to snapshot  0.00% [0/19.69 GB]
Allocated to COW-table 320 MB
Stripes                4
Stripe size (KByte)    4
Allocation             next free
Read ahead sectors     120
Block device           58:19

# lvdisplay /dev/tripserv_vol/docusnap
--- Logical volume ---
LV Name                /dev/tripserv_vol/docusnap
VG Name                tripserv_vol
LV Write Access        read only
LV snapshot status     active destination for /dev/tripserv_vol/docu
LV Status              available
LV #                   16
# open                 0
LV Size                512 MB
Current LE             128
Allocated LE           128
snapshot chunk size    64 KB
Allocated to snapshot  0.05% [256 KB/492.19 MB]
Allocated to COW-table 7.81 MB
Stripes                4
Stripe size (KByte)    4
Allocation             next free
Read ahead sectors     120
Block device           58:15

So it all looks good!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-lvm/attachments/20020918/54d7275b/attachment.htm>


More information about the linux-lvm mailing list