[linux-lvm] bad checksum in superblock, wanted

[Delarians]

Good afternoon, I'm asking for help in recovering damaged metadata after a
220V drop on the server, when the power was restored and the server booted
up, I got an error in the Proxmox panel

Check of pool pve/data failed (status:1). Manual repair required!

then booted from LiveCD debian mounted corrupted metadata and tried to
repair

root at debian:/home/user# lvchange -ay /dev/pve/data_tdata
    Do you want to activate component LV in read-only mode? [y/n]: y
    Allowing activation of component LV.
root at debian:/home/user# lvs
      LV                                        VG                     Attr
      LSize    Pool Origin                                    Data%  Meta%
 Move Log Cpy%Sync Convert
  vm-102-disk-0                             local-hdd-volume1-pve1
-wi-a-----   50.00g
  vm-103-disk-0                             local-hdd-volume1-pve1
-wi-a-----  250.00g
  vm-104-disk-0                             local-hdd-volume1-pve1
-wi-a-----  150.00g
  vm-108-disk-0                             local-hdd-volume1-pve1
-wi-a-----   20.00g
  vm-109-disk-0                             local-hdd-volume1-pve1
-wi-a-----  160.00g
  vm-110-disk-0                             local-hdd-volume1-pve1
-wi-a-----   20.00g
  base-101-disk-0                           pve
 Vri---tz-k   20.00g data
  base-105-disk-0                           pve
 Vri---tz-k   15.00g data
  data                                      pve
 twi---tz-- <858.97g
  root                                      pve
 -wi-a-----   30.00g
  snap_vm-106-disk-0_Installed              pve
 Vri---tz-k   15.00g data
  snap_vm-106-disk-0_Installed_CspAndVipnet pve
 Vri---tz-k   15.00g data
  swap                                      pve
 -wi-a-----    8.00g
  vm-100-disk-0                             pve
 Vwi---tz--   20.00g data
  vm-100-disk-1                             pve
 Vwi---tz--   60.00g data
  vm-102-disk-0                             pve
 Vwi---tz--   20.00g data
  vm-103-disk-0                             pve
 Vwi---tz--   30.00g data
  vm-104-disk-0                             pve
 Vwi---tz--   25.00g data
  vm-106-disk-0                             pve
 Vwi---tz--   15.00g data snap_vm-106-disk-0_Installed_CspAndVipnet
  vm-107-disk-0                             pve
 Vwi---tz--   20.00g data
  vm-108-disk-0                             pve
 Vwi---tz--   30.00g data
  vm-109-disk-0                             pve
 Vwi---tz--   35.00g data
  vm-110-disk-0                             pve
 Vwi---tz--   20.00g data

root at debian:/home/user# vgs
  VG                     #PV #LV #SN Attr   VSize    VFree
  local-hdd-volume1-pve1   1   6   0 wz--n-    3.27t  <2.64t
  pve                      1  17   0 wz--n- <930.50g <16.00g

root at debian:/home/user# ls -la /dev/mapper/ | grep -v vm
total 0
drwxr-xr-x  2 root root     240 Mar 29 17:48 .
drwxr-xr-x 19 root root    3700 Mar 29 17:48 ..
crw-------  1 root root 10, 236 Mar 29 17:35 control
lrwxrwxrwx  1 root root       7 Mar 29 17:48 pve-data_tdata -> ../dm-2
lrwxrwxrwx  1 root root       7 Mar 29 17:35 pve-root -> ../dm-1
lrwxrwxrwx  1 root root       7 Mar 29 17:35 pve-swap -> ../dm-0

root at debian:/home/user# thin_dump --repair /dev/mapper/pve-data_tdata >
repaired.xml
The following field needs to be provided on the command line due to
corruption in the superblock: transaction id

root at debian:/home/user# thin_check /dev/mapper/pve-data_tdata
examining superblock
  superblock is corrupt
    bad checksum in superblock, wanted 2018675394

however, I don’t know how to specify the transaction id and, most
importantly, what id - where to find it

Kernel Version: Linux 5.15.30-2-pve #1 SMP PVE 5.15.30-3 (Fri, 22 Apr 2022
18:08:27 +0200)
PVE Manager Version: pve-manager/7.2-3/c743d6c1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-lvm/attachments/20230330/b0376f4e/attachment-0001.htm>