[Ovirt-devel] [Fwd: host not shown in default hardware pool]

[Ingmar Schraub]

Interesting... the host shows now up after running "ovirt-identify-node
-v -s 192.168.50.2 -p 12120". It is unavailable though.

I shut the appliance down, re-started libvirtd on the host, powered the
appliance back on. Host is still unavailable.

I ran the test "ruby /usr/share/ovirt-server/qmf-libvirt-example.rb",
but this gave me only
Connecting to amqp://management.priv.ovirt.org:5672..
----------------------------
----------------------------

I believe that the kerberos authentication fails (as the logs I provided
indicate). But why? date/time is in sync on host/appliance. /etc/hosts
knows about management.priv.ovirt.org and physical.priv.ovirt.org,
hostname is set properly, ...

I have currently only 1 physical machine (2xIntel Xeon Quadcore, 8GB
RAM, 4xnic,...). On this host (ovirtbr0 - 192.168.50.1, eth0 -
192.168.100.3), I have the 'appliance' running which is the 'management'
station (eth0 - 192.168.50.2).


Here is the log excerpt from db-omatic.log as requested.

INFO Fri Apr 17 13:23:26 +0200 2009 (2276) dbomatic started.
ERROR Fri Apr 17 13:23:36 +0200 2009 (2276) Unable to determine qpid
server fromm
 DNS SRV record, retrying..
INFO Fri Apr 17 13:23:41 +0200 2009 (2276) Connecting to
amqp://management.priv..
ovirt.org:5672
ERROR Fri Apr 17 15:43:26 +0200 2009 (2276) Error in db-omatic: SIGTERM
ERROR Fri Apr 17 15:43:26 +0200 2009 (2276)
/usr/share/ovirt-server/db-omatic/dbb
_omatic.rb:433:in
`sleep'/usr/share/ovirt-server/db-omatic/db_omatic.rb:433:in ``
check_heartbeats'/usr/share/ovirt-server/db-omatic/db_omatic.rb:470:in
`main'/uss
r/share/ovirt-server/db-omatic/db_omatic.rb:474
INFO Fri Apr 17 15:45:18 +0200 2009 (2297) dbomatic started.
ERROR Fri Apr 17 15:45:28 +0200 2009 (2297) Unable to determine qpid
server fromm
 DNS SRV record, retrying..
INFO Fri Apr 17 15:45:33 +0200 2009 (2297) Connecting to
amqp://management.priv..
ovirt.org:5672
INFO Fri Apr 17 15:45:33 +0200 2009 (2297) Marking host
physical.priv.ovirt.org
unavailable

regards,

Ingmar


Joey Boggs wrote:
> 
> Can you also grab the contents of /var/log/ovirt-server/db-omatic.log
> from the appliance?
> 
> Just to make sure, your node is the physical machine running the appliance?
> 
> 
> 
> Ingmar Schraub wrote:
>> Hello,
>>
>> in addition to my trouble report from this morning, I further noticed in
>> the logs the following:
>>
>> HOST:
>> -----
>> Apr 17 14:15:25 physical libvirt-qpid: GSSAPI Error: Unspecified GSS
>> failure.  Minor code may provide more information (No credentials cache
>> found)
>>
>> ovirt-appliance:
>> ----------------
>> Apr 17 14:15:25 management qpidd[2162]: 2009-apr-17 14:15:25 warning
>> Client closed connection with 501: internal-error: Sasl error: SASL(-1):
>> generic failure: GSSAPI Error: Unspecified GSS failure.  Minor code may
>> provide more information (No credentials cache found)
>> (qpid/client/SaslFactory.cpp:226)
>>
>> It seems like the authentication fails and therefore the appliances
>> doesn't 'see' the host.
>>
>> Does anybody know whether this is a libvirt-qpid problem or a qpidd
>> problem or some wrong configuration in ovirt? Is this a known issue or
>> did I hit something new?
>>
>> I am really stuck here...
>>
>> Thanks a lot and best regards,
>>
>> Ingmar
>>  
>> ------------------------------------------------------------------------
>>
>> Subject:
>> host not shown in default hardware pool
>> From:
>> Ingmar Schraub <is at eseco.de>
>> Date:
>> Fri, 17 Apr 2009 10:49:33 +0200
>> To:
>> ovirt-devel at redhat.com
>>
>> To:
>> ovirt-devel at redhat.com
>>
>>
>> Hello,
>>
>> I am new to ovirt and please bare with me if my question has been asked
>> before. I googled, studied the wiki and searched the bug list. But I
>> couldn't find anything similar.
>>
>> I've just set up a new server with F10, fully patched and installed
>> ovirt using the Rawhide build instructions.
>>
>> All seems to work nicely, but I am stuck at one point.
>>
>> After 'sudo ovirt-install-node-stateful' followed by a host reboot I
>> started the appliance again. My problem is that the host is not shown at
>> all in the default hardware pool. Any hints what's going wrong here?
>> What could be missing that the appliance doesn't see my host?
>> Networking, bridge, etc. is all ok.
>>
>> I had also to tweak /etc/httpd/conf.d/ovirt-server.conf because the
>> ovirt-appliance httpd doesn't start with the config file provided. There
>> is already a ticket open on bugzilla. (#489819).
>>
>> Thanks a lot in advance.
>>
>> regards,
>>
>> Ingmar
>>
>>  
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Ovirt-devel mailing list
>> Ovirt-devel at redhat.com
>> https://www.redhat.com/mailman/listinfo/ovirt-devel
>>   
>