[Ovirt-devel] [Fwd: host not shown in default hardware pool]

Fri Apr 17 14:23:31 UTC 2009

On the node try running:     dig +short srv _ovirt._tcp.priv.ovirt.org 
it should return the ip address of your appliance, that could cause the 
gssapi errors since it's not able to find to the server. Also on the 
node can you attach /var/log/ovirt.log which will let us know what's 
going on when the ovirt services start.

Ingmar Schraub wrote:
> Interesting... the host shows now up after running "ovirt-identify-node
> -v -s 192.168.50.2 -p 12120". It is unavailable though.
>
> I shut the appliance down, re-started libvirtd on the host, powered the
> appliance back on. Host is still unavailable.
>
> I ran the test "ruby /usr/share/ovirt-server/qmf-libvirt-example.rb",
> but this gave me only
> Connecting to amqp://management.priv.ovirt.org:5672..
> ----------------------------
> ----------------------------
>
> I believe that the kerberos authentication fails (as the logs I provided
> indicate). But why? date/time is in sync on host/appliance. /etc/hosts
> knows about management.priv.ovirt.org and physical.priv.ovirt.org,
> hostname is set properly, ...
>
> I have currently only 1 physical machine (2xIntel Xeon Quadcore, 8GB
> RAM, 4xnic,...). On this host (ovirtbr0 - 192.168.50.1, eth0 -
> 192.168.100.3), I have the 'appliance' running which is the 'management'
> station (eth0 - 192.168.50.2).
>
>
> Here is the log excerpt from db-omatic.log as requested.
>
> INFO Fri Apr 17 13:23:26 +0200 2009 (2276) dbomatic started.
> ERROR Fri Apr 17 13:23:36 +0200 2009 (2276) Unable to determine qpid
> server fromm
>  DNS SRV record, retrying..
> INFO Fri Apr 17 13:23:41 +0200 2009 (2276) Connecting to
> amqp://management.priv..
> ovirt.org:5672
> ERROR Fri Apr 17 15:43:26 +0200 2009 (2276) Error in db-omatic: SIGTERM
> ERROR Fri Apr 17 15:43:26 +0200 2009 (2276)
> /usr/share/ovirt-server/db-omatic/dbb
> _omatic.rb:433:in
> `sleep'/usr/share/ovirt-server/db-omatic/db_omatic.rb:433:in ``
> check_heartbeats'/usr/share/ovirt-server/db-omatic/db_omatic.rb:470:in
> `main'/uss
> r/share/ovirt-server/db-omatic/db_omatic.rb:474
> INFO Fri Apr 17 15:45:18 +0200 2009 (2297) dbomatic started.
> ERROR Fri Apr 17 15:45:28 +0200 2009 (2297) Unable to determine qpid
> server fromm
>  DNS SRV record, retrying..
> INFO Fri Apr 17 15:45:33 +0200 2009 (2297) Connecting to
> amqp://management.priv..
> ovirt.org:5672
> INFO Fri Apr 17 15:45:33 +0200 2009 (2297) Marking host
> physical.priv.ovirt.org
> unavailable
>
> regards,
>
> Ingmar
>
>
> Joey Boggs wrote:
>   
>> Can you also grab the contents of /var/log/ovirt-server/db-omatic.log
>> from the appliance?
>>
>> Just to make sure, your node is the physical machine running the appliance?
>>
>>
>>
>> Ingmar Schraub wrote:
>>     
>>> Hello,
>>>
>>> in addition to my trouble report from this morning, I further noticed in
>>> the logs the following:
>>>
>>> HOST:
>>> -----
>>> Apr 17 14:15:25 physical libvirt-qpid: GSSAPI Error: Unspecified GSS
>>> failure.  Minor code may provide more information (No credentials cache
>>> found)
>>>
>>> ovirt-appliance:
>>> ----------------
>>> Apr 17 14:15:25 management qpidd[2162]: 2009-apr-17 14:15:25 warning
>>> Client closed connection with 501: internal-error: Sasl error: SASL(-1):
>>> generic failure: GSSAPI Error: Unspecified GSS failure.  Minor code may
>>> provide more information (No credentials cache found)
>>> (qpid/client/SaslFactory.cpp:226)
>>>
>>> It seems like the authentication fails and therefore the appliances
>>> doesn't 'see' the host.
>>>
>>> Does anybody know whether this is a libvirt-qpid problem or a qpidd
>>> problem or some wrong configuration in ovirt? Is this a known issue or
>>> did I hit something new?
>>>
>>> I am really stuck here...
>>>
>>> Thanks a lot and best regards,
>>>
>>> Ingmar
>>>  
>>> ------------------------------------------------------------------------
>>>
>>> Subject:
>>> host not shown in default hardware pool
>>> From:
>>> Ingmar Schraub <is at eseco.de>
>>> Date:
>>> Fri, 17 Apr 2009 10:49:33 +0200
>>> To:
>>> ovirt-devel at redhat.com
>>>
>>> To:
>>> ovirt-devel at redhat.com
>>>
>>>
>>> Hello,
>>>
>>> I am new to ovirt and please bare with me if my question has been asked
>>> before. I googled, studied the wiki and searched the bug list. But I
>>> couldn't find anything similar.
>>>
>>> I've just set up a new server with F10, fully patched and installed
>>> ovirt using the Rawhide build instructions.
>>>
>>> All seems to work nicely, but I am stuck at one point.
>>>
>>> After 'sudo ovirt-install-node-stateful' followed by a host reboot I
>>> started the appliance again. My problem is that the host is not shown at
>>> all in the default hardware pool. Any hints what's going wrong here?
>>> What could be missing that the appliance doesn't see my host?
>>> Networking, bridge, etc. is all ok.
>>>
>>> I had also to tweak /etc/httpd/conf.d/ovirt-server.conf because the
>>> ovirt-appliance httpd doesn't start with the config file provided. There
>>> is already a ticket open on bugzilla. (#489819).
>>>
>>> Thanks a lot in advance.
>>>
>>> regards,
>>>
>>> Ingmar
>>>
>>>  
>>> ------------------------------------------------------------------------
>>>
>>> _______________________________________________
>>> Ovirt-devel mailing list
>>> Ovirt-devel at redhat.com
>>> https://www.redhat.com/mailman/listinfo/ovirt-devel
>>>   
>>>       