[Ovirt-devel] Adding hosts to the hardware pool
Laurent Monnoye
ktf000 at gmail.com
Fri Jun 26 10:30:21 UTC 2009
Well, the hanging at the end was only due to the kernel param
"console=ttyS0,115200n8". If I take it out, then the error message appears
on the console again: "WARNING: Cannot find root file system!"
I'm still wondering how pxe can find ovirt-node-image.iso. It's located only
under /usr/share/ovirt-node-image and given the size of initrd0.img (4537334
bytes), it's obviously not embedded into it.
Did I miss a step in the installation which embeds ovirt-node-image.iso into
initrd0.img? What is the size of your initrd0.img?
On Thu, Jun 25, 2009 at 9:56 PM, Laurent Monnoye <ktf000 at gmail.com> wrote:
>
> cobbler-import output:
>
> # cobbler-import
> + set -e
> + for dir in '$ksdir/*'
> + ova=/var/www/cobbler/ks_mirror/brol/.treeinfo.ova
> + '[' '!' -f /var/www/cobbler/ks_mirror/brol/.treeinfo.ova ']'
> + echo 'Skipping /var/www/cobbler/ks_mirror/brol, no
> /var/www/cobbler/ks_mirror/brol/.treeinfo.ova file present'
> Skipping /var/www/cobbler/ks_mirror/brol, no
> /var/www/cobbler/ks_mirror/brol/.treeinfo.ova file present
> + continue
> + for dir in '$ksdir/*'
> + ova=/var/www/cobbler/ks_mirror/config/.treeinfo.ova
> + '[' '!' -f /var/www/cobbler/ks_mirror/config/.treeinfo.ova ']'
> + echo 'Skipping /var/www/cobbler/ks_mirror/config, no
> /var/www/cobbler/ks_mirror/config/.treeinfo.ova file present'
> Skipping /var/www/cobbler/ks_mirror/config, no
> /var/www/cobbler/ks_mirror/config/.treeinfo.ova file present
> + continue
> + for dir in '$ksdir/*'
> + ova=/var/www/cobbler/ks_mirror/Fedora-11-x86_64-DVD/.treeinfo.ova
> + '[' '!' -f /var/www/cobbler/ks_mirror/Fedora-11-x86_64-DVD/.treeinfo.ova
> ']'
> + echo 'Skipping /var/www/cobbler/ks_mirror/Fedora-11-x86_64-DVD, no
> /var/www/cobbler/ks_mirror/Fedora-11-x86_64-DVD/.treeinfo.ova file present'
> Skipping /var/www/cobbler/ks_mirror/Fedora-11-x86_64-DVD, no
> /var/www/cobbler/ks_mirror/Fedora-11-x86_64-DVD/.treeinfo.ova file present
> + continue
> + for dir in '$ksdir/*'
> + ova=/var/www/cobbler/ks_mirror/ovirt-node/.treeinfo.ova
> + '[' '!' -f /var/www/cobbler/ks_mirror/ovirt-node/.treeinfo.ova ']'
> + echo 'Skipping /var/www/cobbler/ks_mirror/ovirt-node, no
> /var/www/cobbler/ks_mirror/ovirt-node/.treeinfo.ova file present'
> Skipping /var/www/cobbler/ks_mirror/ovirt-node, no
> /var/www/cobbler/ks_mirror/ovirt-node/.treeinfo.ova file present
> + continue
> ++ rpm -q --qf '%{arch}' ovirt-node-image
> + node_arch=x86_64
> + node_dir=/usr/share/ovirt-node-image
> + cobbler distro add --name=oVirt-Node-x86_64 --arch=x86_64
> --initrd=/usr/share/ovirt-node-image/tftpboot/initrd0.img
> --kernel=/usr/share/ovirt-node-image/tftpboot/vmlinuz0
> '--kopts=rootflags=loop root=/ovirt-node-image.iso rootfstype=iso9660 ro
> console=tty0 console=ttyS0,115200n8'
> + cobbler profile add --name=oVirt-Node-x86_64 --distro=oVirt-Node-x86_64
> + cobbler system add --netboot-enabled=1 --profile=oVirt-Node-x86_64
> --name=node3 --mac=00:16:3e:12:34:57
> + cobbler system add --netboot-enabled=1 --profile=oVirt-Node-x86_64
> --name=node4 --mac=00:16:3e:12:34:58 '--kopts=ovirt_init=scsi
> ovirt_local_boot'
> + cobbler system add --netboot-enabled=1 --profile=oVirt-Node-x86_64
> --name=node5 --mac=00:16:3e:12:34:59 --kopts=ovirt_init=scsi
> + sed -i -e '/kernel /a \\tIPAPPEND 2' /etc/cobbler/pxe/pxesystem.template
> + sed -i -e 's/^ONTIMEOUT.*/ONTIMEOUT oVirt-Node-x86_64/'
> /etc/cobbler/pxe/pxedefault.template
> + service cobblerd restart
> Stopping cobbler daemon: [ OK ]
> Starting cobbler daemon: [ OK ]
> + cobbler sync
>
> Here's what I have under /usr/share/ovirt-node-image:
>
> # ls -l /usr/share/ovirt-node-image
> total 68388
> drwxr-xr-x 2 root root 4096 2009-06-24 11:56 manifests
> -rw-r--r-- 1 root root 69947392 2009-06-05 14:44 ovirt-node-image.iso
> drwxr-xr-x 3 root root 4096 2009-06-25 12:43 tftpboot
> # ls -l /usr/share/ovirt-node-image/tftpboot
> total 7052
> -rw-r--r-- 9 root root 4537334 2009-06-25 08:46 initrd0.img
> -rw-r--r-- 1 root root 14716 2009-06-24 11:56 pxelinux.0
> drwxr-xr-x 2 root root 4096 2009-06-25 12:13 pxelinux.cfg
> -r--r--r-- 9 root root 2644128 2009-06-25 08:46 vmlinuz0
>
> I've tried to boot that new profile "oVirt-Node-x86_64". This time I don't
> get the error message anymore. The system just hangs at the end (see console
> output attached). Is that expected?
>
> > Are you building from the next branch or a released version?
>
> standard 0.96. I just installed everything with yum.
>
> > ovirt-node-image.iso should be under /usr/share/ovirt-node-image but in
> the pxe case it's actually embedded in the initrd0.img file
>
> How come initrd0.img is so much smaller than the iso, then?
>
>
>
>
> On Thu, Jun 25, 2009 at 9:25 PM, Joey Boggs <jboggs at redhat.com> wrote:
>
>> On 06/25/2009 03:00 PM, Laurent Monnoye wrote:
>>
>> > Looks like you're missing a few options on the append line, add them in
>> like:
>> > ro rootflags=loop text rootfstype=iso9660 root=/ovirt-node-image.iso
>>
>> I just added these parameters but with no success, same problem (I see
>> them on the console, so they are indeed being picked up).
>>
>> On the server, where should ovirt-node-image.iso be located? Maybe that's
>> my problem.
>>
>> Where are those parameters documented as part of the oVirt installation
>> guide? Did I miss them in the doc?
>>
>> Thanks a lot for your help, much appreciated!!!
>>
>> L-
>>
>> On Thu, Jun 25, 2009 at 8:03 PM, Joey Boggs <jboggs at redhat.com> wrote:
>>
>>> On 06/25/2009 11:06 AM, Laurent Monnoye wrote:
>>>
>>>> LABEL sark4
>>>> kernel /images/ovirt4/vmlinuz0
>>>> MENU LABEL sark4
>>>> append initrd=/images/ovirt4/initrd0.img ksdevice=bootif lang=
>>>> kssendmac text ks=http://192.168.66.1/cblr/svc/op/ks/profile/sark4
>>>> ipappend 2
>>>>
>>>
>>> Looks like you're missing a few options on the append line, add them in
>>> like:
>>>
>>>
>>> ro rootflags=loop text rootfstype=iso9660 root=/ovirt-node-image.iso
>>>
>>>
>>> LABEL sark4
>>> kernel /images/ovirt4/vmlinuz0
>>> MENU LABEL sark4
>>> append initrd=/images/ovirt4/initrd0.img ksdevice=bootif lang=
>>> kssendmac text ks=http://192.168.66.1/cblr/svc/op/ks/profile/sark4 ro
>>> rootflags=loop text rootfstype=iso9660 root=/ovirt-node-image.iso
>>> ipappend 2
>>>
>>
>>
>> ovirt-node-image.iso should be under /usr/share/ovirt-node-image but in
>> the pxe case it's actually embedded in the initrd0.img file. Im guessing
>> some things are out of sync, I'd try running the cobbler-import command
>> which should setup a cobbler profile for you named oVirt-Node-Image-$arch if
>> that command fails capture the output for us. If it succeeds verify if there
>> are any files under /usr/share/ovirt-node-image/tftpboot
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/ovirt-devel/attachments/20090626/101bd2f2/attachment.htm>
More information about the ovirt-devel
mailing list