Piranha hangs

[pb]

Now pulse daemon starts the lvs daemon which manages
the nanny daemons, which run port test scripts and
setup the routes per your lvs.cf.

You might also check the lvs daemon - see if it is
going Z (Zombie).  If it is, it will stop managing the
nanny daemons - though the nannies should keep
functioning as long as thy are running, even if they
are orphaned. 

Check with: 
             ps vafx




--- Ritesh Agrawal <ritesh.a at net4india.net> wrote:
> 
> 
> Lon Hohberger wrote:
> > On Thu, 2005-05-19 at 00:05 +0530, Ritesh Agrawal
> wrote:
> > 
> > 
> >>Hi ,
> >>   i am facing strange problem in implmenting load
> balancer using
> >>piranha,  i make loadbalancer LB1 with following
> configurations
> >>LB1:
> >>private ip: 192.168.35.253
> >>public ip:192.168.24.126
> >>floating VIP:192.168.35.254
> >>service ip : 192.168.24.60
> >>
> >>and spam2 is my real server  with ip 192.168.35.22
> providing http service.
> >>after staring pulse, when  i send  the request
> from outside world to
> >>192.168.24.60:80. it works fine,but after some
> time my LB1 hanged
> >>displaying no error no clue,
> >>unable to find the proper reason of hanging.
> > 
> > 
> > Off the top of my head, piranha hanging (or even
> crashing!) shouldn't
> > affect the load balancing traffic.  Piranha
> controls the routing
> > assignments, but it doesn't do any routing itself
> - the routing is done
> > in-kernel in the IPVS modules.
> > 
> > So, I suspect that lb1 (or rather, its kernel)
> might be hung as opposed
> > to piranha...
> > 
> > Can you get a serial console attached to lb1 and
> see if it's
> > panicking/hung?
> > 
> > -- Lon
> 
> Hi Lon,
> Thanks for your help , actually after starting the
> pulse , everything 
> going well,  10-20 web request it handle properly ,
> but within a minutes 
> Machine hangs , i don't why , I tried to
> troubleshoot by attaching the 
> console with server ,no kernel panic or other error
> message displayed in 
> console.
> 
> I checked /var/log/message for any error ,but i
> couldn't find any clue.
> If problem with hardware or software configuration
> then even single 
> request shouldn't be handled , but it properly work
> for 10-20 requests, 
> but after some idle time it hangs.
> 
> Regards
> Ritesh
> 
> 
> 
> 
> _______________________________________________
> Piranha-list mailing list
> Piranha-list at redhat.com
> https://www.redhat.com/mailman/listinfo/piranha-list
> 


		
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail