HP Storage Works DLT VS80 is not detected
Rusdi
rusdi at komputeralif.com
Wed Aug 4 12:52:29 UTC 2004
Hi...!
I install DLT VS80 tape drive on my machine i.e: HP Proliant DL380 G3.
The machine can detect the tape drive while doing POST ( BIOS). However
The tape drive can not be detected by the OS.
How to overcome these problem?
These is my machine configuration
1. Machine Model: HP Proliant DL380 G3
2. Tape Drive : Hp Storage Works DLT VS80
3. OS : Redhat ES 3
Some more informations:
1. /etc/modules.conf
/etc/modules.conf
-----------------------
alias eth0 tg3
alias eth1 tg3
alias scsi_hostadapter cciss
alias usb-controller usb-ohci
/proc/scsi/scsi
----------------
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TEAC Model: DW-224E Rev: A.1K
Type: CD-ROM ANSI SCSI revision: 02
Untitled 1
# dmesg | grep -i SCSI
-------------------------
SCSI subsystem driver Revision: 1.00
hda: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
# lsmod
---------
Module Size Used by Not tainted
st 32388 0 (autoclean) (unused)
soundcore 7044 0 (autoclean)
lp 9220 0 (autoclean)
parport 39072 0 (autoclean) [lp]
autofs 13780 0 (autoclean) (unused)
tg3 57736 2
sg 38060 0 (autoclean)
sr_mod 18136 0 (autoclean)
floppy 59056 0 (autoclean)
microcode 5248 0 (autoclean)
ide-scsi 12368 0
ide-cd 35776 0
cdrom 34144 0 [sr_mod ide-cd]
keybdev 2976 0 (unused)
mousedev 5688 1
hid 22404 0 (unused)
input 6208 0 [keybdev mousedev hid]
usb-ohci 23688 0 (unused)
usbcore 83168 1 [hid usb-ohci]
ext3 95784 10
bd 56856 10 [ext3]
cciss 46276 11
sd_mod 13744 0 (unused)
scsi_mod 116904 5 [st sg sr_mod ide-scsiccisssd_mod
mt -f /dev/st0 status
------------------------
/dev/st0 : No Such Device
Thanks in advance
Rusdy
---------
More information about the Redhat-install-list
mailing list