Hangs up during reboot/shutdown

[Tapas Ranjan]

Hi :

>>On Sun, Nov 14, 2004 at 04:13:07PM +0900, Tapas Ranjan wrote:
>> Hi :
>> 	Sometimes the pc hangs up during reboot. When the network is poor,
>> the eth1 seems to be freezed and even typing "ifconfig" also hangs up. 
>So 
>> rebooting the system due to those problem hangs up the system  at 
>> "shutting down loopback interfaces" or at "iptables". This happens once 
>in 
>> 6-7 reboots or so.
>>  	I am using FC2 with 2.6.8-1.521 ( upgraded from 2.6.5-1.358
>> through "yum" ). Help from experts is needed. 
>> 	
>> 	---Tapas

>Well, I don't think I qualify, but I'll take a shot at it.
>
>Let's start with the /etc/hosts file.  What does yours have in it?  It
>should look something like mine:
>
>127.0.0.1       localhost.localdomain   localhost
>192.168.2.2     bobcat.bobcatos.com     bobcat

127.0.0.1       localhost.localdomain   localhost
130.87.228.116	Surya

This is the static ip used by eth0 (ethernet). For eth1 there is dhcp 
based ip which varies. I am sorry, if I don't use the proper terminology.


>
>It might also be interesting to see the contents of
>/etc/sysconfig/network-scripts/ifcfg-eth1.  Also your

DEVICE=eth1
BOOTPROTO=dhcp
HWADDR=
ONBOOT=no
TYPE=Wireless
CHANNEL=1
MODE=Auto
RATE=Auto
NETMASK=
DHCP_HOSTNAME=
IPADDR=
DOMAIN=
USERCTL=no
PEERDNS=yes
GATEWAY=
IPV6INIT=no
ESSID=


>/etc/modprobe.conf would be interesting.

install floppy /bin/true
alias eth0 b44
alias eth1 airo_cs
alias snd-card-0 snd-intel8x0
install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && 
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; 
/sbin/modprobe -r --ignore-remove snd-intel8x0
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd


>
>Out of curiosity, why eth1?  What's going on with eth0?

Since I used eth0 for ethernet via wire-connection, so eth1.

	Thanks 
	---Tapas