help on nautilus-cd-burner

[Jay Berryman]

If you look through /var/log/messages you should see something similar to
this:

<hostname> kernel: hdc: attached ide-scsi driver
<hostname> kernel: scsi0 : SCSI hsot adapter emulation for IDE ATAPI
devices.

The make and model of you CD-Writer should be listed below.  You should also
see the following line shortly thereafter:

<hostname> kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0

The scsi channel, id, and lun numbers may vary.  This should tell you which
scsi bus your cd-writer is attached to and where it is located.  It should
also tell you what errors, if any, you might be having.

Jay Berryman
Systems Engineer, RHCT
 

This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and confidential.
If the reader of the message is not the intended recipient, or the
authorized agent of the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited.  If you have
received this communication in error, please notify SITEL immediately by
telephone at 402.963.6001 and delete the message and any attachments from
your system.  Thank you for your cooperation


-----Original Message-----
From: redhat-list-bounces at redhat.com [mailto:redhat-list-bounces at redhat.com]
On Behalf Of Margaret Doll
Sent: Thursday, September 02, 2004 7:26 AM
To: General Red Hat Linux discussion list
Subject: Re: help on nautilus-cd-burner

cdrecord - scanbus

cdrecord:  Device or resource busy.  Cannot open '/dev/sg0'.  Cannot 
open SCSI
driver.

/dev/sg0 has a Qualstar tape  library attacted to it.  The cd burner is 
on /dev/hdc.


On Wednesday, September 1, 2004, at 05:55 PM, Jay Berryman wrote:

> Have you tried using cdrecord from the command line?  Running the 
> following
> command should tell you if Linux can see the device or not.
>
> cdrecord -scanbus
>
> Jay Berryman
> Systems Engineer, RHCT
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and 
> confidential.
> If the reader of the message is not the intended recipient, or the
> authorized agent of the intended recipient, you are hereby notified 
> that any
> dissemination of this communication is strictly prohibited.  If you 
> have
> received this communication in error, please notify SITEL immediately 
> by
> telephone at 402.963.6001 and delete the message and any attachments 
> from
> your system.  Thank you for your cooperation
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com 
> [mailto:redhat-list-bounces at redhat.com]
> On Behalf Of Margaret Doll
> Sent: Wednesday, September 01, 2004 4:40 PM
> To: redhat-list at redhat.com
> Subject: help on nautilus-cd-burner
>
> I believe the problem I am having with nautilus-cd-burner and xcdroast
> running on RedHat Enterprise AS, is that  neither  program can find the
> cd  writer.
>
> /boot/grub/grub.conf   contains
>
> 	kernel ... hdc=ide-scsi
>
> /etc/modules.conf  contains no line with hdc or ide-scsi
>
> /sbin/insmod  ide-scsi; /sbin/insmod sg
>
> 	says that both modules  exist
>
> /var/log/dmesg  contains
>
> 	hdc:  SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
>
> When I put a blank cd in the drive, nautilus-cd-burner starts up.
>
>
> -- 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
> -- 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>


-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/redhat-list