help on nautilus-cd-burner
Margaret Doll
Margaret_Doll at brown.edu
Thu Sep 2 15:26:18 UTC 2004
From the tail of /var/log/dmesg
st: Version 20030406, bufsize 32768, max init. bufs 4, s/g segs 16
Attached scsi tape st0 at scsi0, channel 0, id 1, lun 0
Attached scsi tape st1 at scsi0, channel 0, id 2, lun 0
hdc: attached ide-scsi driver.
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
From /var/log/messages: I don't see any error messages.
Sep 2 08:13:28 geops kernel: Attached scsi tape st0 at scsi0, channel
0, id 1, lun 0
Sep 2 08:13:28 geops kernel: Attached scsi tape st1 at scsi0, channel
0, id 2, lun 0
Sep 2 08:13:28 geops kernel: hdc: attached ide-scsi driver.
Sep 2 08:13:28 geops kernel: scsi1 : SCSI host adapter emulation for
IDE ATAPI devices
Sep 2 08:13:28 geops kernel: Vendor: SONY Model: CD-RW CRX160E
Rev: 1.0g
Sep 2 08:13:28 geops kernel: Type: CD-ROM
ANSI SCSI revision: 02
Sep 2 08:13:28 geops kernel: IA-32 Microcode Update Driver: v1.13
<tigran at veritas.com>
Sep 2 08:13:28 geops kernel: microcode: CPU0 already at revision 0x5
(current=0x5)
Sep 2 08:13:28 geops kernel: microcode: No suitable data for cpu 0
Sep 2 08:13:28 geops kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE,EPP]
Sep 2 08:13:28 geops kernel: parport0: irq 7 detected
Sep 2 08:13:28 geops kernel: Attached scsi CD-ROM sr0 at scsi1,
channel 0, id 0, lun 0
Sep 2 08:13:28 geops kernel: sr0: scsi3-mmc drive: 32x/32x writer
cd/rw xa/form2 cdda tray
Sep 2 08:13:28 geops kernel: Uniform CD-ROM driver Revision: 3.12
Sep 2 08:13:28 geops kernel: Attached scsi generic sg0 at scsi0,
channel 0, id 0, lun 0, type 8
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: QUALSTAR Model: TLS-4212i Rev: 2.09
Type: Medium Changer ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SONY Model: SDX-500C Rev: 0107
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: SONY Model: SDX-500C Rev: 010f
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: CD-RW CRX160E Rev: 1.0g
Type: CD-ROM ANSI SCSI revision: 02
On Thursday, September 2, 2004, at 11:07 AM, Jay Berryman wrote:
> If you look through /var/log/messages you should see something similar
> to
> this:
>
> <hostname> kernel: hdc: attached ide-scsi driver
> <hostname> kernel: scsi0 : SCSI hsot adapter emulation for IDE ATAPI
> devices.
>
> The make and model of you CD-Writer should be listed below. You
> should also
> see the following line shortly thereafter:
>
> <hostname> kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0,
> lun 0
>
> The scsi channel, id, and lun numbers may vary. This should tell you
> which
> scsi bus your cd-writer is attached to and where it is located. It
> should
> also tell you what errors, if any, you might be having.
>
> Jay Berryman
> Systems Engineer, RHCT
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential.
> If the reader of the message is not the intended recipient, or the
> authorized agent of the intended recipient, you are hereby notified
> that any
> dissemination of this communication is strictly prohibited. If you
> have
> received this communication in error, please notify SITEL immediately
> by
> telephone at 402.963.6001 and delete the message and any attachments
> from
> your system. Thank you for your cooperation
>
>
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com]
> On Behalf Of Margaret Doll
> Sent: Thursday, September 02, 2004 7:26 AM
> To: General Red Hat Linux discussion list
> Subject: Re: help on nautilus-cd-burner
>
> cdrecord - scanbus
>
> cdrecord: Device or resource busy. Cannot open '/dev/sg0'. Cannot
> open SCSI
> driver.
>
> /dev/sg0 has a Qualstar tape library attacted to it. The cd burner is
> on /dev/hdc.
>
>
> On Wednesday, September 1, 2004, at 05:55 PM, Jay Berryman wrote:
>
>> Have you tried using cdrecord from the command line? Running the
>> following
>> command should tell you if Linux can see the device or not.
>>
>> cdrecord -scanbus
>>
>> Jay Berryman
>> Systems Engineer, RHCT
>>
>>
>> This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and
>> confidential.
>> If the reader of the message is not the intended recipient, or the
>> authorized agent of the intended recipient, you are hereby notified
>> that any
>> dissemination of this communication is strictly prohibited. If you
>> have
>> received this communication in error, please notify SITEL immediately
>> by
>> telephone at 402.963.6001 and delete the message and any attachments
>> from
>> your system. Thank you for your cooperation
>>
>> -----Original Message-----
>> From: redhat-list-bounces at redhat.com
>> [mailto:redhat-list-bounces at redhat.com]
>> On Behalf Of Margaret Doll
>> Sent: Wednesday, September 01, 2004 4:40 PM
>> To: redhat-list at redhat.com
>> Subject: help on nautilus-cd-burner
>>
>> I believe the problem I am having with nautilus-cd-burner and xcdroast
>> running on RedHat Enterprise AS, is that neither program can find
>> the
>> cd writer.
>>
>> /boot/grub/grub.conf contains
>>
>> kernel ... hdc=ide-scsi
>>
>> /etc/modules.conf contains no line with hdc or ide-scsi
>>
>> /sbin/insmod ide-scsi; /sbin/insmod sg
>>
>> says that both modules exist
>>
>> /var/log/dmesg contains
>>
>> hdc: SONY CD-RW CRX160E, ATAPI CD/DVD-ROM drive
>>
>> When I put a blank cd in the drive, nautilus-cd-burner starts up.
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>>
>> --
>> redhat-list mailing list
>> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
>> https://www.redhat.com/mailman/listinfo/redhat-list
>>
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
More information about the redhat-list
mailing list