XFree86 4.3.0
Smith, Albert
Albert.Smith at genexservices.com
Mon Mar 28 20:02:28 UTC 2005
I have done that a number of times. I am currently testing some
modelines to see if I can get it to work.
Albert Smith
Sr. Unix Systems Administrator
HPCSA, RHCT
Genex Services
440 E. Swedesford Rd.
Wayne, PA 19087
albert.smith at genexservices.com
(610) 964-5154
> -----Original Message-----
> From: redhat-list-bounces at redhat.com
> [mailto:redhat-list-bounces at redhat.com] On Behalf Of Wayne Betts
> Sent: Monday, March 28, 2005 2:58 PM
> To: General Red Hat Linux discussion list
> Subject: Re: XFree86 4.3.0
>
> I've had some odd results with X configuration on RHEL 3 and
> rebuilds after installation that sound like the same thing.
> Assuming the card really is supported natively, I can usually
> get things to work as expected by starting the
> redhat-config-xfree86 tool, going to the advanced tab, and
> hit the configure button for both the monitor and the video
> card. In each configure window, hit the "Probe" button.
> Once that is done, then go back to the basic tab and select
> the video mode you want and apply. Restart X (log out or
> reboot) and see if that does it for you.
>
> For some reason, the installation's x config routine rarely
> (if ever?) gets this all right, even if you go through it
> during the installation and it seems to be the same utility.
> That's pretty basic, but it has been the solution for me many
> times in what sounds like the same situation.
>
> HTH,
>
> Wayne
>
> On Mon, 2005-03-28 at 09:58, Smith, Albert wrote:
> > Hello All,
> >
> > Got a sticky problem here and need some assistance. Fresh
> install of
> > ES 3.0 and is current with RHN updates. I have a intel
> 82865G vid card
> > and a HP A4575A monitor. No matter what display res. I set it to it
> > always defaults down to a 640x480 with a depth of 16 and I get a
> > number of error's for the modes that it can use with the
> following error:
> >
> > No mode of this name
> >
> > any assistance would be appreciated.
> >
> >
> > Thanks,
> >
> > Albert Smith
> > Sr. Unix Systems Administrator
> > HPCSA, RHCT
> > Genex Services
> > 440 E. Swedesford Rd.
> > Wayne, PA 19087
> > albert.smith at genexservices.com
> > (610) 964-5154
> >
>
> --
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request at redhat.com?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/redhat-list
>
>
More information about the redhat-list
mailing list