[rhn-users] qlogic 2300 attached luns not enabled with 2.4.21-32.EL

[Raj Kumar]

Hi,

I had this problem recently. But rebuilding initrd solved it. 
After reboot, what commands do you execute to make the luns available?
One solution that I used for a while was to include "modprobe qla2300" in rc.local file. You can also mount the initrd image using option "-oloop " and then check if the qla2300.o is in it. Can you post your /etc/modules.conf ?

Cheers,
Raj


On Wed, 25 May 2005 Ray Stell wrote :
>
>After an recent download of kernel update vmlinuz-2.4.21-32.EL
>the qlogic attached luns will not retain an enabled status
>on reboot.  This was not true with the last kernel, vmlinuz-2.4.21-27.0.4.EL.
>I'm trying to use the built into redhat qla2300.o.
>
>I can enable the luns with qlogic software and they work, but
>the config does not survive a reboot.  I've created a new
>initrd with the modules.conf and the disks enabled, but
>the OS scsi mapping to the qlogic card does not show up
>in messages.  If I boot the old kernel the luns come up.
>
>Is there something else I have to do to make the mapping persistant.
>
>Old (working) /var/log/messages lines:
>
>May 19 15:47:21 pecan kernel: scsi(0): Found a QLA2312  @ bus 1, device 0xa, irq 11, iobase 0xf88dd000
>May 19 15:47:21 pecan kernel: scsi(0): 32 Bit PCI Addressing Enabled.
>May 19 15:47:21 pecan kernel: scsi(0): Configure NVRAM parameters...
>May 19 15:47:21 pecan kernel: scsi(0): Verifying loaded RISC code...
>May 19 15:47:21 pecan kernel: scsi(0): Verifying chip...
>May 19 15:47:21 pecan kernel: scsi(0): Waiting for LIP to complete...
>May 19 15:47:21 pecan kernel: scsi(0): LOOP UP detected.
>May 19 15:47:21 pecan kernel: scsi(0): Port database changed.
>May 19 15:47:21 pecan kernel: scsi(0): Topology - (F_Port), Host Loop address 0xffff
>May 19 15:47:21 pecan kernel: scsi-qla0-adapter-node=200000e08b0a8deb\;
>May 19 15:47:21 pecan kernel: scsi-qla0-adapter-port=210000e08b0a8deb\;
>May 19 15:47:21 pecan kernel: scsi-qla0-tgt-0-di-0-port=5005076300c89456\;
>May 19 15:47:21 pecan kernel: scsi-qla0-tgt-1-di-0-port=5005076300c49456\;
>May 19 15:47:21 pecan kernel: scsi0 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 1 device 10 irq 11
>May 19 15:47:21 pecan kernel: scsi(0:0:0:0): Enabled tagged queuing, queue depth 32.
>May 19 15:47:21 pecan kernel: scsi(0:0:0:1): Enabled tagged queuing, queue depth 32.
>May 19 15:47:21 pecan kernel: scsi(0:0:1:0): Enabled tagged queuing, queue depth 32.
>May 19 15:47:21 pecan kernel: scsi(0:0:1:1): Enabled tagged queuing, queue depth 32.
>May 19 15:47:21 pecan kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>May 19 15:47:21 pecan kernel: Attached scsi disk sdb at scsi0, channel 0, id 0, lun 1
>May 19 15:47:22 pecan kernel: Attached scsi disk sdc at scsi0, channel 0, id 1, lun 0
>May 19 15:47:22 pecan kernel: Attached scsi disk sdd at scsi0, channel 0, id 1, lun 1
>May 19 15:47:22 pecan kernel: scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored
>May 19 15:47:22 pecan kernel: scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored
>
>new (broken) /var/log/messages lines:
>
>May 24 14:53:45 pecan kernel: scsi(0): Found a QLA2312  @ bus 1, device 0xa, irq 11, iobase 0xf88de000
>May 24 14:53:45 pecan kernel: scsi(0): 32 Bit PCI Addressing Enabled.
>May 24 14:53:45 pecan kernel: scsi(0): Configure NVRAM parameters...
>May 24 14:53:45 pecan kernel: scsi(0): Verifying loaded RISC code...
>May 24 14:53:45 pecan kernel: scsi(0): Verifying chip...
>May 24 14:53:45 pecan kernel: scsi(0): Waiting for LIP to complete...
>May 24 14:53:45 pecan kernel: scsi(0): LOOP UP detected.
>May 24 14:53:45 pecan kernel: scsi(0): Port database changed.
>May 24 14:53:45 pecan kernel: scsi(0): Topology - (F_Port), Host Loop address 0xffff
>May 24 14:53:45 pecan kernel: scsi-qla0-adapter-node=200000e08b0a8deb\;
>May 24 14:53:45 pecan kernel: scsi-qla0-adapter-port=210000e08b0a8deb\;
>May 24 14:53:45 pecan kernel: scsi0 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 1 device 10 irq 11
>May 24 14:53:45 pecan kernel: scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored
>May 24 14:53:45 pecan kernel: scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored
>============================================================
>Ray Stell  stellr at vt.edu  (540) 231-4109  Tempus fugit  28^D
>
>_______________________________________________
>rhn-users mailing list
>rhn-users at redhat.com
>https://www.redhat.com/mailman/listinfo/rhn-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/rhn-users/attachments/20050524/e50898c9/attachment.htm>