[rhn-users] NIC Issue
Nick Baronian
kvetch at gmail.com
Fri Apr 21 17:07:55 UTC 2006
Edward, I am not positive what you are asking but can't you just swap the
cables from eth1 and plug it into eth0?
If not you can edit the files /etc/sysconfig/network-scripts/ifcfg-eth0 and
/etc/sysconfig/network-scripts/ifcfg-eth1
They might look something like this
# Intel Corp.|82541EI Gigabit Ethernet Controller
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
TYPE=Ethernet
HWADDR=55:11:99:Y6:6E:8B
IPADDR=192.168.1.99
GATEWAY=192.168.1.1
NETMASK=255.255.255.0
USERCTL=no
PEERDNS=no
Just change the device name, IP and other settings to match your setup. You
might want to either remove or comment out the hwaddr line if you are still
having issues.
-Nick Baronian
On 4/20/06, Edward David <edavid at ucalgary.ca> wrote:
>
> I am new to this form so I am hoping I do not offend anyone.
> I have a server HP BL20p Blade server with 5 NIC cards in it.
> Currently I am showing eth1 as the default NIC card.
> I need to change it to eth0 and do not know how to do this.
> So if anyone can help me resolve this issue it is pretty sever.
> I am running AS4 red hat.
> This is the route table:-
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use
> Iface
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> eth0
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> eth3
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> eth2
> 192.168.1.0 * 255.255.255.0 U 0 0 0
> eth1
> default 192.168.1.1 0.0.0.0 UG 0 0 0
> eth1
>
> Hope this information is helpful.
>
> ------------------------------
> Edward David
> Sr. Systems Analyst
> University of Calgary
> Information Resources
> Information Technology Service
> (403 220-3383
> ------------------------------
>
> _______________________________________________
> rhn-users mailing list
> rhn-users at redhat.com
> https://www.redhat.com/mailman/listinfo/rhn-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/rhn-users/attachments/20060421/121af93a/attachment.htm>
More information about the rhn-users
mailing list