[edk2-devel] Help with debugging
Andrew Fish via groups.io
afish=apple.com at groups.io
Fri Jun 11 23:09:06 UTC 2021
> On Jun 11, 2021, at 2:29 PM, Ethin Probst <harlydavidsen at gmail.com> wrote:
>
> Initial connection and loading symbols:
> Remote debugging using :1234
> 0x000000007e4b9517 in ?? ()
> add symbol table from file "Build/MdeModule/DEBUG_GCC5/X64/UsbAudio.debug" at
> .text_addr = 0x7e4b8000
> Reading symbols from Build/MdeModule/DEBUG_GCC5/X64/UsbAudio.debug...
> Expanding full symbols from Build/MdeModule/DEBUG_GCC5/X64/UsbAudio.debug...
> Backtrace:
> #0 0x000000007e4b9517 in UefiMain (st=0x7f9ee018,
> imageHandle=0x7e4f7518) at
> /home/ethin/source/edk/edk2/MdeModulePkg/Application/UsbAudio/UsbAudio.c:72
> #1 ProcessModuleEntryPointList (SystemTable=0x7f9ee018,
> ImageHandle=0x7e4f7518) at
> /home/ethin/source/edk/edk2/Build/MdeModule/DEBUG_GCC5/X64/MdeModulePkg/Application/UsbAudio/UsbAudio/DEBUG/AutoGen.c:300
> #2 _ModuleEntryPoint (ImageHandle=0x7e4f7518, SystemTable=0x7f9ee018)
> at /home/ethin/source/edk/edk2/MdePkg/Library/UefiApplicationEntryPoint/ApplicationEntryPoint.c:59
> #3 0x000000007fead316 in ?? ()
> #4 0x000000007e4f7518 in ?? ()
> #5 0x000000007feab5c7 in ?? ()
> #6 0x000000007fea3520 in ?? ()
> #7 0x0000000101000000 in ?? ()
> #8 0x0000000000000030 in ?? ()
> #9 0x000000007e4f6018 in ?? ()
> #10 0x000000007e60a918 in ?? ()
> #11 0x000000000000011d in ?? ()
> #12 0x000000007fea3528 in ?? ()
> #13 0x000000007e4f7818 in ?? ()
> #14 0x000000007e4f7c98 in ?? ()
> #15 0x000000007fea3538 in ?? ()
> #16 0x000000007e3abfca in ?? ()
> #17 0x000000007e4f7418 in ?? ()
> #18 0x000000007fea3528 in ?? ()
> #19 0x0000000000000000 in ?? ()
> Source-code listing:
> 1 /** @file
> 2 GCC inline implementation of BaseLib processor specific functions.
> 3
> 4 Copyright (c) 2006 - 2020, Intel Corporation. All rights reserved.<BR>
> 5 Portions copyright (c) 2008 - 2009, Apple Inc. All rights reserved.<BR>
> 6 SPDX-License-Identifier: BSD-2-Clause-Patent
> 7
> 8 **/
> 9
> 10
> Attempt to use "next":
> 72 } else if (interfaceDescriptor.InterfaceClass == 0x01 &&
> interfaceDescriptor.InterfaceSubClass == 0x03) {
> (This is my code but it continuously prints this same line over and
> over every time "next" is used.)
> Attempt to use "print Index":
> No symbol "Index" in current context.
> info local:
> UsbIo = 0x0
> interfaceDescriptor = {Length = 0 '\000', DescriptorType = 8 '\b',
> InterfaceNumber = 1 '\001', AlternateSetting = 0 '\000', NumEndpoints
> = 0 '\000', InterfaceClass = 0 '\000', InterfaceSubClass = 0 '\000',
> InterfaceProtocol = 0 '\000',
> Interface = 0 '\000'}
> i = 2118887920
> numHandles = 264
> handles = 0x4
> status = <optimized out>
> info symbol 0x0007E4B9440:
> _ModuleEntryPoint + 576 in section .text of
> /home/ethin/source/edk/edk2/Build/MdeModule/DEBUG_GCC5/X64/UsbAudio.debug
OK that is interesting…. +576 -> 0x240 witch is about the size of the PE/COFF header.
For mach-O (macOS executables) we have to link at 0x240 to make space for the PE/COFF header in memory….
So the PE/COFF header starts at 0x7e4b8000 it is likely the text section starts at 0x7e4b8240? So try adding 0x240 to the load address on the add-symbol-file command. If that does not work trip subtracting 0x240 from the load address.
We would need to dump out the UsbAudio.efi file to figure out exactly what is going on. What distro are you on? Do you have the readpe utility? I’m not sure what you can dump with objcopy?
Can you mail me a copy of UsbAudio.efi off list? I can take a quick look.
Thanks,
Andrew Fish
> The extra weird thing about this is that CpuDeadLoop() is at the start
> of the UefiMain function, its not on line 72. The program doesn't even
> start there -- it starts by attempting to get the list of
> EFI_USB_IO_PROTOCOL handles available. And GDB is making it look like
> its skipping all of that.
>
> On 6/11/21, Andrew Fish <afish at apple.com <mailto:afish at apple.com>> wrote:
>>
>>
>>> On Jun 11, 2021, at 1:48 PM, Ethin Probst <harlydavidsen at gmail.com>
>>> wrote:
>>>
>>> Okay, so I just tried exactly what you told me to do -- use
>>> CpuDeadLoop() and then just modify index to get out of it. Here's what
>>> I do in GDB:
>>> - Load the EFI application and connect via target remote :1234
>>> - type `add-symbol-file Build/MdeModule/DEBUG_GCC5/X64/UsbAudio.debug
>>> 0x0007E4B8000` and answer yes when it prompts me to do so.
>>> (0x0007E4B8000 is the image base, the entry point is at
>>> 0x0007E4B9440.)
>>> - When I try to print the Index symbol, GDB tells me that it isn't in
>>> the current context.
>>> I feel like I'm missing something. I'm also not the best with GDB myself.
>>> :)
>>
>> What do you get from the following gdb commands?
>> bt
>> info local
>> info symbol 0x0007E4B9440
>>
>> What exactly is gdb showing you?
>>
>> Thanks,
>>
>> Andrew Fish
>>
>>>
>>> On 6/11/21, Andrew Fish <afish at apple.com <mailto:afish at apple.com> <mailto:afish at apple.com <mailto:afish at apple.com>>> wrote:
>>>>
>>>>
>>>>> On Jun 11, 2021, at 11:39 AM, Ethin Probst <harlydavidsen at gmail.com <mailto:harlydavidsen at gmail.com>>
>>>>> wrote:
>>>>>
>>>>> Hi Andrew,
>>>>> How do you debug the EFI binary with LLDB? Can LLDB use GDB stubs or
>>>>> does that work differently?
>>>>>
>>>>
>>>> Ethin,
>>>>
>>>> Lldb is the command line debugger that comes with Xcode on Mac. There is
>>>> no
>>>> gdb with Xcode, so I have to use lldb for my day job.
>>>>
>>>> Lldb can speak the gdb remote serial protocol: lldb -o “gdb-remote 9000”
>>>> That assumes you passed `-gdb tcp::9000`to QEMU.
>>>>
>>>> Thanks,
>>>>
>>>> Andrew Fish
>>>>
>>>>> On 6/11/21, Andrew Fish <afish at apple.com <mailto:afish at apple.com> <mailto:afish at apple.com <mailto:afish at apple.com>>
>>>>> <mailto:afish at apple.com <mailto:afish at apple.com> <mailto:afish at apple.com <mailto:afish at apple.com>>>> wrote:
>>>>>>
>>>>>>
>>>>>>> On Jun 11, 2021, at 10:06 AM, Ethin Probst <harlydavidsen at gmail.com <mailto:harlydavidsen at gmail.com>
>>>>>>> <mailto:harlydavidsen at gmail.com <mailto:harlydavidsen at gmail.com>>>
>>>>>>> wrote:
>>>>>>>
>>>>>>> Hey all,
>>>>>>>
>>>>>>> So Leif and I have discussed this at length but I thought I'd reach
>>>>>>> out to all of you for more help.
>>>>>>>
>>>>>>> I'm having a lot of trouble debugging my UEFI app. Here's how I do
>>>>>>> things:
>>>>>>>
>>>>>>> - I load the app using uefi-run
>>>>>>> (https://github.com/Richard-W/uefi-run <https://github.com/Richard-W/uefi-run>
>>>>>>> <https://github.com/Richard-W/uefi-run <https://github.com/Richard-W/uefi-run>>) like this (from the main EDK
>>>>>>> II directory): uefi-run -b Build/OvmfX64/DEBUG_GCC5/FV/OVMF.fd
>>>>>>> Build/OvmfX64/DEBUG_GCC5/X64/Shell.efi -- -M q35 -m 24G -usb -device
>>>>>>> qemu-xhci -device usb-audio,audiodev=audio -audiodev alsa,id=audio -s
>>>>>>> -debugcon file:../debug.log -global isa-debugcon.iobase=0x402
>>>>>>> -nographic
>>>>>>> Or:
>>>>>>> uefi-run -b Build/OvmfX64/DEBUG_GCC5/FV/OVMF.fd
>>>>>>> Build/OvmfX64/DEBUG_GCC5/X64/Shell.efi -- -M q35 -m 24G -usb -device
>>>>>>> qemu-xhci -device usb-audio,audiodev=audio -audiodev alsa,id=audio -s
>>>>>>> -debugcon stdio -global isa-debugcon.iobase=0x402
>>>>>>> - I connect to the remote GDB stub (localhost:1234) and wait until
>>>>>>> OVMF gives me the image base. Then I use:
>>>>>>> add-symbol-file UsbAudio.debug <image base>
>>>>>>> Here's where everything breaks down. One of two things happens at
>>>>>>> this
>>>>>>> point:
>>>>>>> 1. Either I get the wrong debug information (I get source code but
>>>>>>> the
>>>>>>> image isn't loaded anymore), and resetting the system and placing a
>>>>>>> breakpoint (either software or hardware) has no effect; or
>>>>>>> 2. If I use CpuBreakpoint(), the firmware gives me the registers and
>>>>>>> the image base and entry point addresses, and then appears to just
>>>>>>> sit
>>>>>>> there waiting for something. Once I load the symbols using the image
>>>>>>> base it gives me, I can't actually do anything in the debugger; I
>>>>>>> can't list code because I get "1 in <artificial>", I can't jump into
>>>>>>> my code without triggering a general protection exception or not
>>>>>>> actually causing anything to happen... You get the idea.
>>>>>>>
>>>>>>> So I'm really, really confused on what's going wrong. Do you guys
>>>>>>> have
>>>>>>> any advice?
>>>>>>
>>>>>> Ethin,
>>>>>>
>>>>>> Caveat emptor as I use lldb for my daily driver debugger so I might be
>>>>>> a
>>>>>> little off on gdb specifics…. Also my terminology may be lldb centric.
>>>>>>
>>>>>> Easy one 1st. When you run on top of a debugger using CpuBreakpoint()
>>>>>> works
>>>>>> great as the debugger hides its self from you. On x86 CpuBreakpoint()
>>>>>> is
>>>>>> an
>>>>>> INT 3h instruction (0xCC) and it causes an exception 3. If you don’t
>>>>>> have
>>>>>> a
>>>>>> debugger hooked in underneath the exception 3 is going to get handled
>>>>>> in
>>>>>> the unexpected exception handler, and that is probably in the CPUD DXE
>>>>>> driver or DXE Core or some such. So you are going to end up with the
>>>>>> PC/IP/RIP in the wrong driver. A lot of times for hardware debuggers
>>>>>> it
>>>>>> works better to use CpuDeadLoop(). The gdb-remote stub from QEMU acts
>>>>>> a
>>>>>> lot
>>>>>> more like a JTAG hardware debugger than a pure software debugger. Also
>>>>>> note
>>>>>> that CpuDeadLoop() is an infinite loop, so you can modify the loop
>>>>>> variable
>>>>>> with the debugger to continue.
>>>>>>
>>>>>> I’d suggest a work flow of run your App/Driver, hit the CpuDeadLoop(),
>>>>>> attach gdb. Now after you have the target established load the
>>>>>> symbols.
>>>>>> The
>>>>>> reason for me suggesting this flow is the debugger has a flexible
>>>>>> concept
>>>>>> of
>>>>>> what the target is. If you load symbols that will create a target for
>>>>>> a
>>>>>> stock x86-64 image. When you connect to the QEMU gdb-remote there is a
>>>>>> handshake that describes the target and what registers are available.
>>>>>> I
>>>>>> seem
>>>>>> to remember QEMU exports some of the system registers, like the
>>>>>> control
>>>>>> registers, so it is an extended version of the x86-64 target. So this
>>>>>> changing the target definition might confuse the debugger. To be safe
>>>>>> I
>>>>>> always connect 1st and then load symbols.
>>>>>>
>>>>>> The EFI images are PE/COFF relocatable executables that are linked
>>>>>> around
>>>>>> zero. They get loaded into memory and relocated, so that is why you
>>>>>> need
>>>>>> to
>>>>>> specify the load address to get the symbols to resolve. One trick I
>>>>>> use
>>>>>> is
>>>>>> to load the ELF (or PE/COFF) build output directly into the debugger.
>>>>>> This
>>>>>> lets you poke around the image at the linked address. You can
>>>>>> disassemble
>>>>>> the functions to see what they look like, obviously you can read any
>>>>>> variables. This can be useful if you get the unhandled exception and
>>>>>> it
>>>>>> prints out the load address and offset (you can use the offset
>>>>>> directly).
>>>>>> It
>>>>>> is also a good way to debug why your symbols are not quite loaded at
>>>>>> the
>>>>>> correct address, as you can see what bytes/instructions should be at a
>>>>>> given
>>>>>> address.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Andrew Fish
>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Signed,
>>>>>>> Ethin D. Probst
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Signed,
>>>>> Ethin D. Probst
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Signed,
>>> Ethin D. Probst
>>>
>>>
>>>
>>
>>
>
>
> --
> Signed,
> Ethin D. Probst
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#76415): https://edk2.groups.io/g/devel/message/76415
Mute This Topic: https://groups.io/mt/83473484/1813853
Group Owner: devel+owner at edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [edk2-devel-archive at redhat.com]
-=-=-=-=-=-=-=-=-=-=-=-
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/edk2-devel-archive/attachments/20210611/6264b023/attachment.htm>
More information about the edk2-devel-archive
mailing list